mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
425aa308a2
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20190904135918.25352-17-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
457 lines
11 KiB
C
457 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Driver for Amlogic Meson SPI flash controller (SPIFC)
|
|
//
|
|
// Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
//
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/types.h>
|
|
|
|
/* register map */
|
|
#define REG_CMD 0x00
|
|
#define REG_ADDR 0x04
|
|
#define REG_CTRL 0x08
|
|
#define REG_CTRL1 0x0c
|
|
#define REG_STATUS 0x10
|
|
#define REG_CTRL2 0x14
|
|
#define REG_CLOCK 0x18
|
|
#define REG_USER 0x1c
|
|
#define REG_USER1 0x20
|
|
#define REG_USER2 0x24
|
|
#define REG_USER3 0x28
|
|
#define REG_USER4 0x2c
|
|
#define REG_SLAVE 0x30
|
|
#define REG_SLAVE1 0x34
|
|
#define REG_SLAVE2 0x38
|
|
#define REG_SLAVE3 0x3c
|
|
#define REG_C0 0x40
|
|
#define REG_B8 0x60
|
|
#define REG_MAX 0x7c
|
|
|
|
/* register fields */
|
|
#define CMD_USER BIT(18)
|
|
#define CTRL_ENABLE_AHB BIT(17)
|
|
#define CLOCK_SOURCE BIT(31)
|
|
#define CLOCK_DIV_SHIFT 12
|
|
#define CLOCK_DIV_MASK (0x3f << CLOCK_DIV_SHIFT)
|
|
#define CLOCK_CNT_HIGH_SHIFT 6
|
|
#define CLOCK_CNT_HIGH_MASK (0x3f << CLOCK_CNT_HIGH_SHIFT)
|
|
#define CLOCK_CNT_LOW_SHIFT 0
|
|
#define CLOCK_CNT_LOW_MASK (0x3f << CLOCK_CNT_LOW_SHIFT)
|
|
#define USER_DIN_EN_MS BIT(0)
|
|
#define USER_CMP_MODE BIT(2)
|
|
#define USER_UC_DOUT_SEL BIT(27)
|
|
#define USER_UC_DIN_SEL BIT(28)
|
|
#define USER_UC_MASK ((BIT(5) - 1) << 27)
|
|
#define USER1_BN_UC_DOUT_SHIFT 17
|
|
#define USER1_BN_UC_DOUT_MASK (0xff << 16)
|
|
#define USER1_BN_UC_DIN_SHIFT 8
|
|
#define USER1_BN_UC_DIN_MASK (0xff << 8)
|
|
#define USER4_CS_ACT BIT(30)
|
|
#define SLAVE_TRST_DONE BIT(4)
|
|
#define SLAVE_OP_MODE BIT(30)
|
|
#define SLAVE_SW_RST BIT(31)
|
|
|
|
#define SPIFC_BUFFER_SIZE 64
|
|
|
|
/**
|
|
* struct meson_spifc
|
|
* @master: the SPI master
|
|
* @regmap: regmap for device registers
|
|
* @clk: input clock of the built-in baud rate generator
|
|
* @device: the device structure
|
|
*/
|
|
struct meson_spifc {
|
|
struct spi_master *master;
|
|
struct regmap *regmap;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
};
|
|
|
|
static const struct regmap_config spifc_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = REG_MAX,
|
|
};
|
|
|
|
/**
|
|
* meson_spifc_wait_ready() - wait for the current operation to terminate
|
|
* @spifc: the Meson SPI device
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_spifc_wait_ready(struct meson_spifc *spifc)
|
|
{
|
|
unsigned long deadline = jiffies + msecs_to_jiffies(5);
|
|
u32 data;
|
|
|
|
do {
|
|
regmap_read(spifc->regmap, REG_SLAVE, &data);
|
|
if (data & SLAVE_TRST_DONE)
|
|
return 0;
|
|
cond_resched();
|
|
} while (!time_after(jiffies, deadline));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_drain_buffer() - copy data from device buffer to memory
|
|
* @spifc: the Meson SPI device
|
|
* @buf: the destination buffer
|
|
* @len: number of bytes to copy
|
|
*/
|
|
static void meson_spifc_drain_buffer(struct meson_spifc *spifc, u8 *buf,
|
|
int len)
|
|
{
|
|
u32 data;
|
|
int i = 0;
|
|
|
|
while (i < len) {
|
|
regmap_read(spifc->regmap, REG_C0 + i, &data);
|
|
|
|
if (len - i >= 4) {
|
|
*((u32 *)buf) = data;
|
|
buf += 4;
|
|
} else {
|
|
memcpy(buf, &data, len - i);
|
|
break;
|
|
}
|
|
i += 4;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_fill_buffer() - copy data from memory to device buffer
|
|
* @spifc: the Meson SPI device
|
|
* @buf: the source buffer
|
|
* @len: number of bytes to copy
|
|
*/
|
|
static void meson_spifc_fill_buffer(struct meson_spifc *spifc, const u8 *buf,
|
|
int len)
|
|
{
|
|
u32 data;
|
|
int i = 0;
|
|
|
|
while (i < len) {
|
|
if (len - i >= 4)
|
|
data = *(u32 *)buf;
|
|
else
|
|
memcpy(&data, buf, len - i);
|
|
|
|
regmap_write(spifc->regmap, REG_C0 + i, data);
|
|
|
|
buf += 4;
|
|
i += 4;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_setup_speed() - program the clock divider
|
|
* @spifc: the Meson SPI device
|
|
* @speed: desired speed in Hz
|
|
*/
|
|
static void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed)
|
|
{
|
|
unsigned long parent, value;
|
|
int n;
|
|
|
|
parent = clk_get_rate(spifc->clk);
|
|
n = max_t(int, parent / speed - 1, 1);
|
|
|
|
dev_dbg(spifc->dev, "parent %lu, speed %u, n %d\n", parent,
|
|
speed, n);
|
|
|
|
value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK;
|
|
value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK;
|
|
value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) &
|
|
CLOCK_CNT_HIGH_MASK;
|
|
|
|
regmap_write(spifc->regmap, REG_CLOCK, value);
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_txrx() - transfer a chunk of data
|
|
* @spifc: the Meson SPI device
|
|
* @xfer: the current SPI transfer
|
|
* @offset: offset of the data to transfer
|
|
* @len: length of the data to transfer
|
|
* @last_xfer: whether this is the last transfer of the message
|
|
* @last_chunk: whether this is the last chunk of the transfer
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_spifc_txrx(struct meson_spifc *spifc,
|
|
struct spi_transfer *xfer,
|
|
int offset, int len, bool last_xfer,
|
|
bool last_chunk)
|
|
{
|
|
bool keep_cs = true;
|
|
int ret;
|
|
|
|
if (xfer->tx_buf)
|
|
meson_spifc_fill_buffer(spifc, xfer->tx_buf + offset, len);
|
|
|
|
/* enable DOUT stage */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK,
|
|
USER_UC_DOUT_SEL);
|
|
regmap_write(spifc->regmap, REG_USER1,
|
|
(8 * len - 1) << USER1_BN_UC_DOUT_SHIFT);
|
|
|
|
/* enable data input during DOUT */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS,
|
|
USER_DIN_EN_MS);
|
|
|
|
if (last_chunk) {
|
|
if (last_xfer)
|
|
keep_cs = xfer->cs_change;
|
|
else
|
|
keep_cs = !xfer->cs_change;
|
|
}
|
|
|
|
regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT,
|
|
keep_cs ? USER4_CS_ACT : 0);
|
|
|
|
/* clear transition done bit */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0);
|
|
/* start transfer */
|
|
regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER);
|
|
|
|
ret = meson_spifc_wait_ready(spifc);
|
|
|
|
if (!ret && xfer->rx_buf)
|
|
meson_spifc_drain_buffer(spifc, xfer->rx_buf + offset, len);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_transfer_one() - perform a single transfer
|
|
* @master: the SPI master
|
|
* @spi: the SPI device
|
|
* @xfer: the current SPI transfer
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_spifc_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
int len, done = 0, ret = 0;
|
|
|
|
meson_spifc_setup_speed(spifc, xfer->speed_hz);
|
|
|
|
regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0);
|
|
|
|
while (done < xfer->len && !ret) {
|
|
len = min_t(int, xfer->len - done, SPIFC_BUFFER_SIZE);
|
|
ret = meson_spifc_txrx(spifc, xfer, done, len,
|
|
spi_transfer_is_last(master, xfer),
|
|
done + len >= xfer->len);
|
|
done += len;
|
|
}
|
|
|
|
regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB,
|
|
CTRL_ENABLE_AHB);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_hw_init() - reset and initialize the SPI controller
|
|
* @spifc: the Meson SPI device
|
|
*/
|
|
static void meson_spifc_hw_init(struct meson_spifc *spifc)
|
|
{
|
|
/* reset device */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST,
|
|
SLAVE_SW_RST);
|
|
/* disable compatible mode */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0);
|
|
/* set master mode */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0);
|
|
}
|
|
|
|
static int meson_spifc_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct meson_spifc *spifc;
|
|
void __iomem *base;
|
|
unsigned int rate;
|
|
int ret = 0;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct meson_spifc));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
spifc = spi_master_get_devdata(master);
|
|
spifc->dev = &pdev->dev;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base)) {
|
|
ret = PTR_ERR(base);
|
|
goto out_err;
|
|
}
|
|
|
|
spifc->regmap = devm_regmap_init_mmio(spifc->dev, base,
|
|
&spifc_regmap_config);
|
|
if (IS_ERR(spifc->regmap)) {
|
|
ret = PTR_ERR(spifc->regmap);
|
|
goto out_err;
|
|
}
|
|
|
|
spifc->clk = devm_clk_get(spifc->dev, NULL);
|
|
if (IS_ERR(spifc->clk)) {
|
|
dev_err(spifc->dev, "missing clock\n");
|
|
ret = PTR_ERR(spifc->clk);
|
|
goto out_err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(spifc->clk);
|
|
if (ret) {
|
|
dev_err(spifc->dev, "can't prepare clock\n");
|
|
goto out_err;
|
|
}
|
|
|
|
rate = clk_get_rate(spifc->clk);
|
|
|
|
master->num_chipselect = 1;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
master->auto_runtime_pm = true;
|
|
master->transfer_one = meson_spifc_transfer_one;
|
|
master->min_speed_hz = rate >> 6;
|
|
master->max_speed_hz = rate >> 1;
|
|
|
|
meson_spifc_hw_init(spifc);
|
|
|
|
pm_runtime_set_active(spifc->dev);
|
|
pm_runtime_enable(spifc->dev);
|
|
|
|
ret = devm_spi_register_master(spifc->dev, master);
|
|
if (ret) {
|
|
dev_err(spifc->dev, "failed to register spi master\n");
|
|
goto out_clk;
|
|
}
|
|
|
|
return 0;
|
|
out_clk:
|
|
clk_disable_unprepare(spifc->clk);
|
|
out_err:
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int meson_spifc_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
clk_disable_unprepare(spifc->clk);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int meson_spifc_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = spi_master_suspend(master);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!pm_runtime_suspended(dev))
|
|
clk_disable_unprepare(spifc->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_spifc_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
ret = clk_prepare_enable(spifc->clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
meson_spifc_hw_init(spifc);
|
|
|
|
ret = spi_master_resume(master);
|
|
if (ret)
|
|
clk_disable_unprepare(spifc->clk);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
#ifdef CONFIG_PM
|
|
static int meson_spifc_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
|
|
clk_disable_unprepare(spifc->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_spifc_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct meson_spifc *spifc = spi_master_get_devdata(master);
|
|
|
|
return clk_prepare_enable(spifc->clk);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops meson_spifc_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(meson_spifc_suspend, meson_spifc_resume)
|
|
SET_RUNTIME_PM_OPS(meson_spifc_runtime_suspend,
|
|
meson_spifc_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static const struct of_device_id meson_spifc_dt_match[] = {
|
|
{ .compatible = "amlogic,meson6-spifc", },
|
|
{ .compatible = "amlogic,meson-gxbb-spifc", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, meson_spifc_dt_match);
|
|
|
|
static struct platform_driver meson_spifc_driver = {
|
|
.probe = meson_spifc_probe,
|
|
.remove = meson_spifc_remove,
|
|
.driver = {
|
|
.name = "meson-spifc",
|
|
.of_match_table = of_match_ptr(meson_spifc_dt_match),
|
|
.pm = &meson_spifc_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(meson_spifc_driver);
|
|
|
|
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
|
MODULE_DESCRIPTION("Amlogic Meson SPIFC driver");
|
|
MODULE_LICENSE("GPL v2");
|