mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
293 lines
6.8 KiB
C
293 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
|
|
*
|
|
* Based on arch/arm/mach-pxa/corgi_ssp.c
|
|
*
|
|
* Copyright (C) 2004-2005 Richard Purdie
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* Eric Miao <eric.miao@marvell.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
|
|
enum chips { max1110, max1111, max1112, max1113 };
|
|
|
|
#define MAX1111_TX_BUF_SIZE 1
|
|
#define MAX1111_RX_BUF_SIZE 2
|
|
|
|
/* MAX1111 Commands */
|
|
#define MAX1111_CTRL_PD0 (1u << 0)
|
|
#define MAX1111_CTRL_PD1 (1u << 1)
|
|
#define MAX1111_CTRL_SGL (1u << 2)
|
|
#define MAX1111_CTRL_UNI (1u << 3)
|
|
#define MAX1110_CTRL_SEL_SH (4)
|
|
#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */
|
|
#define MAX1111_CTRL_STR (1u << 7)
|
|
|
|
struct max1111_data {
|
|
struct spi_device *spi;
|
|
struct device *hwmon_dev;
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer[2];
|
|
uint8_t tx_buf[MAX1111_TX_BUF_SIZE];
|
|
uint8_t rx_buf[MAX1111_RX_BUF_SIZE];
|
|
struct mutex drvdata_lock;
|
|
/* protect msg, xfer and buffers from multiple access */
|
|
int sel_sh;
|
|
int lsb;
|
|
};
|
|
|
|
static int max1111_read(struct device *dev, int channel)
|
|
{
|
|
struct max1111_data *data = dev_get_drvdata(dev);
|
|
uint8_t v1, v2;
|
|
int err;
|
|
|
|
/* writing to drvdata struct is not thread safe, wait on mutex */
|
|
mutex_lock(&data->drvdata_lock);
|
|
|
|
data->tx_buf[0] = (channel << data->sel_sh) |
|
|
MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
|
|
MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
|
|
|
|
err = spi_sync(data->spi, &data->msg);
|
|
if (err < 0) {
|
|
dev_err(dev, "spi_sync failed with %d\n", err);
|
|
mutex_unlock(&data->drvdata_lock);
|
|
return err;
|
|
}
|
|
|
|
v1 = data->rx_buf[0];
|
|
v2 = data->rx_buf[1];
|
|
|
|
mutex_unlock(&data->drvdata_lock);
|
|
|
|
if ((v1 & 0xc0) || (v2 & 0x3f))
|
|
return -EINVAL;
|
|
|
|
return (v1 << 2) | (v2 >> 6);
|
|
}
|
|
|
|
#ifdef CONFIG_SHARPSL_PM
|
|
static struct max1111_data *the_max1111;
|
|
|
|
int max1111_read_channel(int channel)
|
|
{
|
|
if (!the_max1111 || !the_max1111->spi)
|
|
return -ENODEV;
|
|
|
|
return max1111_read(&the_max1111->spi->dev, channel);
|
|
}
|
|
EXPORT_SYMBOL(max1111_read_channel);
|
|
#endif
|
|
|
|
/*
|
|
* NOTE: SPI devices do not have a default 'name' attribute, which is
|
|
* likely to be used by hwmon applications to distinguish between
|
|
* different devices, explicitly add a name attribute here.
|
|
*/
|
|
static ssize_t name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
|
|
}
|
|
|
|
static ssize_t show_adc(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct max1111_data *data = dev_get_drvdata(dev);
|
|
int channel = to_sensor_dev_attr(attr)->index;
|
|
int ret;
|
|
|
|
ret = max1111_read(dev, channel);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Assume the reference voltage to be 2.048V or 4.096V, with an 8-bit
|
|
* sample. The LSB weight is 8mV or 16mV depending on the chip type.
|
|
*/
|
|
return sprintf(buf, "%d\n", ret * data->lsb);
|
|
}
|
|
|
|
#define MAX1111_ADC_ATTR(_id) \
|
|
SENSOR_DEVICE_ATTR(in##_id##_input, S_IRUGO, show_adc, NULL, _id)
|
|
|
|
static DEVICE_ATTR_RO(name);
|
|
static MAX1111_ADC_ATTR(0);
|
|
static MAX1111_ADC_ATTR(1);
|
|
static MAX1111_ADC_ATTR(2);
|
|
static MAX1111_ADC_ATTR(3);
|
|
static MAX1111_ADC_ATTR(4);
|
|
static MAX1111_ADC_ATTR(5);
|
|
static MAX1111_ADC_ATTR(6);
|
|
static MAX1111_ADC_ATTR(7);
|
|
|
|
static struct attribute *max1111_attributes[] = {
|
|
&dev_attr_name.attr,
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group max1111_attr_group = {
|
|
.attrs = max1111_attributes,
|
|
};
|
|
|
|
static struct attribute *max1110_attributes[] = {
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group max1110_attr_group = {
|
|
.attrs = max1110_attributes,
|
|
};
|
|
|
|
static int setup_transfer(struct max1111_data *data)
|
|
{
|
|
struct spi_message *m;
|
|
struct spi_transfer *x;
|
|
|
|
m = &data->msg;
|
|
x = &data->xfer[0];
|
|
|
|
spi_message_init(m);
|
|
|
|
x->tx_buf = &data->tx_buf[0];
|
|
x->len = MAX1111_TX_BUF_SIZE;
|
|
spi_message_add_tail(x, m);
|
|
|
|
x++;
|
|
x->rx_buf = &data->rx_buf[0];
|
|
x->len = MAX1111_RX_BUF_SIZE;
|
|
spi_message_add_tail(x, m);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max1111_probe(struct spi_device *spi)
|
|
{
|
|
enum chips chip = spi_get_device_id(spi)->driver_data;
|
|
struct max1111_data *data;
|
|
int err;
|
|
|
|
spi->bits_per_word = 8;
|
|
spi->mode = SPI_MODE_0;
|
|
err = spi_setup(spi);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
data = devm_kzalloc(&spi->dev, sizeof(struct max1111_data), GFP_KERNEL);
|
|
if (data == NULL)
|
|
return -ENOMEM;
|
|
|
|
switch (chip) {
|
|
case max1110:
|
|
data->lsb = 8;
|
|
data->sel_sh = MAX1110_CTRL_SEL_SH;
|
|
break;
|
|
case max1111:
|
|
data->lsb = 8;
|
|
data->sel_sh = MAX1111_CTRL_SEL_SH;
|
|
break;
|
|
case max1112:
|
|
data->lsb = 16;
|
|
data->sel_sh = MAX1110_CTRL_SEL_SH;
|
|
break;
|
|
case max1113:
|
|
data->lsb = 16;
|
|
data->sel_sh = MAX1111_CTRL_SEL_SH;
|
|
break;
|
|
}
|
|
err = setup_transfer(data);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_init(&data->drvdata_lock);
|
|
|
|
data->spi = spi;
|
|
spi_set_drvdata(spi, data);
|
|
|
|
err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
|
|
if (err) {
|
|
dev_err(&spi->dev, "failed to create attribute group\n");
|
|
return err;
|
|
}
|
|
if (chip == max1110 || chip == max1112) {
|
|
err = sysfs_create_group(&spi->dev.kobj, &max1110_attr_group);
|
|
if (err) {
|
|
dev_err(&spi->dev,
|
|
"failed to create extended attribute group\n");
|
|
goto err_remove;
|
|
}
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&spi->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
dev_err(&spi->dev, "failed to create hwmon device\n");
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto err_remove;
|
|
}
|
|
|
|
#ifdef CONFIG_SHARPSL_PM
|
|
the_max1111 = data;
|
|
#endif
|
|
return 0;
|
|
|
|
err_remove:
|
|
sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
|
|
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
|
|
return err;
|
|
}
|
|
|
|
static void max1111_remove(struct spi_device *spi)
|
|
{
|
|
struct max1111_data *data = spi_get_drvdata(spi);
|
|
|
|
#ifdef CONFIG_SHARPSL_PM
|
|
the_max1111 = NULL;
|
|
#endif
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
|
|
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
|
|
mutex_destroy(&data->drvdata_lock);
|
|
}
|
|
|
|
static const struct spi_device_id max1111_ids[] = {
|
|
{ "max1110", max1110 },
|
|
{ "max1111", max1111 },
|
|
{ "max1112", max1112 },
|
|
{ "max1113", max1113 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, max1111_ids);
|
|
|
|
static struct spi_driver max1111_driver = {
|
|
.driver = {
|
|
.name = "max1111",
|
|
},
|
|
.id_table = max1111_ids,
|
|
.probe = max1111_probe,
|
|
.remove = max1111_remove,
|
|
};
|
|
|
|
module_spi_driver(max1111_driver);
|
|
|
|
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
|
|
MODULE_DESCRIPTION("MAX1110/MAX1111/MAX1112/MAX1113 ADC Driver");
|
|
MODULE_LICENSE("GPL");
|