mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
9b24a35cb5
Explicitly use the SoC specific compatible strings in kirkwood.dtsi and dove.dtsi, so that the crypto devices have access to the TDMA feature when attached to the new CESA driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
782 lines
18 KiB
Plaintext
782 lines
18 KiB
Plaintext
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
compatible = "marvell,dove";
|
|
model = "Marvell Armada 88AP510 SoC";
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "marvell,pj4a", "marvell,sheeva-v7";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
l2: l2-cache {
|
|
compatible = "marvell,tauros2-cache";
|
|
marvell,tauros2-cache-features = <0>;
|
|
};
|
|
|
|
i2c-mux {
|
|
compatible = "i2c-mux-pinctrl";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c-parent = <&i2c>;
|
|
|
|
pinctrl-names = "i2c0", "i2c1", "i2c2";
|
|
pinctrl-0 = <&pmx_i2cmux_0>;
|
|
pinctrl-1 = <&pmx_i2cmux_1>;
|
|
pinctrl-2 = <&pmx_i2cmux_2>;
|
|
|
|
i2c0: i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
i2c1: i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Requires pmx_i2c1 on i2c controller node */
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* Requires pmx_i2c2 on i2c controller node */
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
mbus {
|
|
compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
|
|
pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */
|
|
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */
|
|
MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */
|
|
MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */
|
|
MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */
|
|
MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */
|
|
|
|
pcie: pcie-controller {
|
|
compatible = "marvell,dove-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&intc>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
|
|
0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
|
|
0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */
|
|
0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */
|
|
0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
|
|
0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
|
|
|
|
pcie0: pcie-port@0 {
|
|
device_type = "pci";
|
|
status = "disabled";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
clocks = <&gate_clk 4>;
|
|
marvell,pcie-port = <0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &intc 16>;
|
|
};
|
|
|
|
pcie1: pcie-port@1 {
|
|
device_type = "pci";
|
|
status = "disabled";
|
|
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
|
|
reg = <0x1000 0 0 0 0>;
|
|
clocks = <&gate_clk 5>;
|
|
marvell,pcie-port = <1>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
|
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &intc 18>;
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */
|
|
0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */
|
|
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
|
|
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
|
|
|
|
spi0: spi-ctrl@10600 {
|
|
compatible = "marvell,orion-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <6>;
|
|
reg = <0x10600 0x28>;
|
|
clocks = <&core_clk 0>;
|
|
pinctrl-0 = <&pmx_spi0>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c: i2c-ctrl@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <11>;
|
|
clock-frequency = <400000>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&core_clk 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <7>;
|
|
clocks = <&core_clk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <8>;
|
|
clocks = <&core_clk 0>;
|
|
pinctrl-0 = <&pmx_uart1>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@12200 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12200 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <9>;
|
|
clocks = <&core_clk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@12300 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12300 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <10>;
|
|
clocks = <&core_clk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi-ctrl@14600 {
|
|
compatible = "marvell,orion-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <5>;
|
|
reg = <0x14600 0x28>;
|
|
clocks = <&core_clk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mbusc: mbus-ctrl@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x80>, <0x800100 0x8>;
|
|
};
|
|
|
|
sysc: system-ctrl@20000 {
|
|
compatible = "marvell,orion-system-controller";
|
|
reg = <0x20000 0x110>;
|
|
};
|
|
|
|
bridge_intc: bridge-interrupt-ctrl@20110 {
|
|
compatible = "marvell,orion-bridge-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20110 0x8>;
|
|
interrupts = <0>;
|
|
marvell,#interrupts = <5>;
|
|
};
|
|
|
|
intc: main-interrupt-ctrl@20200 {
|
|
compatible = "marvell,orion-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20200 0x10>, <0x20210 0x10>;
|
|
};
|
|
|
|
timer: timer@20300 {
|
|
compatible = "marvell,orion-timer";
|
|
reg = <0x20300 0x20>;
|
|
interrupt-parent = <&bridge_intc>;
|
|
interrupts = <1>, <2>;
|
|
clocks = <&core_clk 0>;
|
|
};
|
|
|
|
watchdog@20300 {
|
|
compatible = "marvell,orion-wdt";
|
|
reg = <0x20300 0x28>, <0x20108 0x4>;
|
|
interrupt-parent = <&bridge_intc>;
|
|
interrupts = <3>;
|
|
clocks = <&core_clk 0>;
|
|
};
|
|
|
|
crypto: crypto-engine@30000 {
|
|
compatible = "marvell,dove-crypto";
|
|
reg = <0x30000 0x10000>;
|
|
reg-names = "regs";
|
|
interrupts = <31>;
|
|
clocks = <&gate_clk 15>;
|
|
marvell,crypto-srams = <&crypto_sram>;
|
|
marvell,crypto-sram-size = <0x800>;
|
|
status = "okay";
|
|
};
|
|
|
|
ehci0: usb-host@50000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x1000>;
|
|
interrupts = <24>;
|
|
clocks = <&gate_clk 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
ehci1: usb-host@51000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x51000 0x1000>;
|
|
interrupts = <25>;
|
|
clocks = <&gate_clk 1>;
|
|
status = "okay";
|
|
};
|
|
|
|
xor0: dma-engine@60800 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60a00 0x100>;
|
|
clocks = <&gate_clk 23>;
|
|
status = "okay";
|
|
|
|
channel0 {
|
|
interrupts = <39>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
|
|
channel1 {
|
|
interrupts = <40>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
};
|
|
|
|
xor1: dma-engine@60900 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60b00 0x100>;
|
|
clocks = <&gate_clk 24>;
|
|
status = "okay";
|
|
|
|
channel0 {
|
|
interrupts = <42>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
|
|
channel1 {
|
|
interrupts = <43>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
};
|
|
|
|
sdio1: sdio-host@90000 {
|
|
compatible = "marvell,dove-sdhci";
|
|
reg = <0x90000 0x100>;
|
|
interrupts = <36>, <38>;
|
|
clocks = <&gate_clk 9>;
|
|
pinctrl-0 = <&pmx_sdio1>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
eth: ethernet-ctrl@72000 {
|
|
compatible = "marvell,orion-eth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x72000 0x4000>;
|
|
clocks = <&gate_clk 2>;
|
|
marvell,tx-checksum-limit = <1600>;
|
|
status = "disabled";
|
|
|
|
ethernet-port@0 {
|
|
compatible = "marvell,orion-eth-port";
|
|
reg = <0>;
|
|
interrupts = <29>;
|
|
/* overwrite MAC address in bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
phy-handle = <ðphy>;
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus@72004 {
|
|
compatible = "marvell,orion-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x72004 0x84>;
|
|
interrupts = <30>;
|
|
clocks = <&gate_clk 2>;
|
|
status = "disabled";
|
|
|
|
ethphy: ethernet-phy {
|
|
/* set phy address in board file */
|
|
};
|
|
};
|
|
|
|
sdio0: sdio-host@92000 {
|
|
compatible = "marvell,dove-sdhci";
|
|
reg = <0x92000 0x100>;
|
|
interrupts = <35>, <37>;
|
|
clocks = <&gate_clk 8>;
|
|
pinctrl-0 = <&pmx_sdio0>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
sata0: sata-host@a0000 {
|
|
compatible = "marvell,orion-sata";
|
|
reg = <0xa0000 0x2400>;
|
|
interrupts = <62>;
|
|
clocks = <&gate_clk 3>;
|
|
phys = <&sata_phy0>;
|
|
phy-names = "port0";
|
|
nr-ports = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata_phy0: sata-phy@a2000 {
|
|
compatible = "marvell,mvebu-sata-phy";
|
|
reg = <0xa2000 0x0334>;
|
|
clocks = <&gate_clk 3>;
|
|
clock-names = "sata";
|
|
#phy-cells = <0>;
|
|
status = "ok";
|
|
};
|
|
|
|
audio0: audio-controller@b0000 {
|
|
compatible = "marvell,dove-audio";
|
|
reg = <0xb0000 0x2210>;
|
|
interrupts = <19>, <20>;
|
|
clocks = <&gate_clk 12>;
|
|
clock-names = "internal";
|
|
status = "disabled";
|
|
};
|
|
|
|
audio1: audio-controller@b4000 {
|
|
compatible = "marvell,dove-audio";
|
|
reg = <0xb4000 0x2210>;
|
|
interrupts = <21>, <22>;
|
|
clocks = <&gate_clk 13>;
|
|
clock-names = "internal";
|
|
status = "disabled";
|
|
};
|
|
|
|
pmu: power-management@d0000 {
|
|
compatible = "marvell,dove-pmu", "simple-bus";
|
|
reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
|
|
ranges = <0x00000000 0x000d0000 0x8000
|
|
0x00008000 0x000d8000 0x8000>;
|
|
interrupts = <33>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
#reset-cells = <1>;
|
|
|
|
domains {
|
|
vpu_domain: vpu-domain {
|
|
#power-domain-cells = <0>;
|
|
marvell,pmu_pwr_mask = <0x00000008>;
|
|
marvell,pmu_iso_mask = <0x00000001>;
|
|
resets = <&pmu 16>;
|
|
};
|
|
|
|
gpu_domain: gpu-domain {
|
|
#power-domain-cells = <0>;
|
|
marvell,pmu_pwr_mask = <0x00000004>;
|
|
marvell,pmu_iso_mask = <0x00000002>;
|
|
resets = <&pmu 18>;
|
|
};
|
|
};
|
|
|
|
thermal: thermal-diode@001c {
|
|
compatible = "marvell,dove-thermal";
|
|
reg = <0x001c 0x0c>, <0x005c 0x08>;
|
|
};
|
|
|
|
gate_clk: clock-gating-ctrl@0038 {
|
|
compatible = "marvell,dove-gating-clock";
|
|
reg = <0x0038 0x4>;
|
|
clocks = <&core_clk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pinctrl: pin-ctrl@0200 {
|
|
compatible = "marvell,dove-pinctrl";
|
|
reg = <0x0200 0x14>,
|
|
<0x0440 0x04>;
|
|
clocks = <&gate_clk 22>;
|
|
|
|
pmx_gpio_0: pmx-gpio-0 {
|
|
marvell,pins = "mpp0";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_1: pmx-gpio-1 {
|
|
marvell,pins = "mpp1";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_2: pmx-gpio-2 {
|
|
marvell,pins = "mpp2";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_3: pmx-gpio-3 {
|
|
marvell,pins = "mpp3";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_4: pmx-gpio-4 {
|
|
marvell,pins = "mpp4";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_5: pmx-gpio-5 {
|
|
marvell,pins = "mpp5";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_6: pmx-gpio-6 {
|
|
marvell,pins = "mpp6";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_7: pmx-gpio-7 {
|
|
marvell,pins = "mpp7";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_8: pmx-gpio-8 {
|
|
marvell,pins = "mpp8";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_9: pmx-gpio-9 {
|
|
marvell,pins = "mpp9";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pcie1_clkreq: pmx-pcie1-clkreq {
|
|
marvell,pins = "mpp9";
|
|
marvell,function = "pex1";
|
|
};
|
|
|
|
pmx_gpio_10: pmx-gpio-10 {
|
|
marvell,pins = "mpp10";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_11: pmx-gpio-11 {
|
|
marvell,pins = "mpp11";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pcie0_clkreq: pmx-pcie0-clkreq {
|
|
marvell,pins = "mpp11";
|
|
marvell,function = "pex0";
|
|
};
|
|
|
|
pmx_gpio_12: pmx-gpio-12 {
|
|
marvell,pins = "mpp12";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_13: pmx-gpio-13 {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_audio1_extclk: pmx-audio1-extclk {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "audio1";
|
|
};
|
|
|
|
pmx_gpio_14: pmx-gpio-14 {
|
|
marvell,pins = "mpp14";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_15: pmx-gpio-15 {
|
|
marvell,pins = "mpp15";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_16: pmx-gpio-16 {
|
|
marvell,pins = "mpp16";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_17: pmx-gpio-17 {
|
|
marvell,pins = "mpp17";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_18: pmx-gpio-18 {
|
|
marvell,pins = "mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_19: pmx-gpio-19 {
|
|
marvell,pins = "mpp19";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_20: pmx-gpio-20 {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_21: pmx-gpio-21 {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_camera: pmx-camera {
|
|
marvell,pins = "mpp_camera";
|
|
marvell,function = "camera";
|
|
};
|
|
|
|
pmx_camera_gpio: pmx-camera-gpio {
|
|
marvell,pins = "mpp_camera";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sdio0: pmx-sdio0 {
|
|
marvell,pins = "mpp_sdio0";
|
|
marvell,function = "sdio0";
|
|
};
|
|
|
|
pmx_sdio0_gpio: pmx-sdio0-gpio {
|
|
marvell,pins = "mpp_sdio0";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_sdio1: pmx-sdio1 {
|
|
marvell,pins = "mpp_sdio1";
|
|
marvell,function = "sdio1";
|
|
};
|
|
|
|
pmx_sdio1_gpio: pmx-sdio1-gpio {
|
|
marvell,pins = "mpp_sdio1";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_audio1_gpio: pmx-audio1-gpio {
|
|
marvell,pins = "mpp_audio1";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
|
|
marvell,pins = "mpp_audio1";
|
|
marvell,function = "i2s1/spdifo";
|
|
};
|
|
|
|
pmx_spi0: pmx-spi0 {
|
|
marvell,pins = "mpp_spi0";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
pmx_spi0_gpio: pmx-spi0-gpio {
|
|
marvell,pins = "mpp_spi0";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_spi1_4_7: pmx-spi1-4-7 {
|
|
marvell,pins = "mpp4", "mpp5",
|
|
"mpp6", "mpp7";
|
|
marvell,function = "spi1";
|
|
};
|
|
|
|
pmx_spi1_20_23: pmx-spi1-20-23 {
|
|
marvell,pins = "mpp20", "mpp21",
|
|
"mpp22", "mpp23";
|
|
marvell,function = "spi1";
|
|
};
|
|
|
|
pmx_uart1: pmx-uart1 {
|
|
marvell,pins = "mpp_uart1";
|
|
marvell,function = "uart1";
|
|
};
|
|
|
|
pmx_uart1_gpio: pmx-uart1-gpio {
|
|
marvell,pins = "mpp_uart1";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_nand: pmx-nand {
|
|
marvell,pins = "mpp_nand";
|
|
marvell,function = "nand";
|
|
};
|
|
|
|
pmx_nand_gpo: pmx-nand-gpo {
|
|
marvell,pins = "mpp_nand";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_i2c1: pmx-i2c1 {
|
|
marvell,pins = "mpp17", "mpp19";
|
|
marvell,function = "twsi";
|
|
};
|
|
|
|
pmx_i2c2: pmx-i2c2 {
|
|
marvell,pins = "mpp_audio1";
|
|
marvell,function = "twsi";
|
|
};
|
|
|
|
pmx_ssp_i2c2: pmx-ssp-i2c2 {
|
|
marvell,pins = "mpp_audio1";
|
|
marvell,function = "ssp/twsi";
|
|
};
|
|
|
|
pmx_i2cmux_0: pmx-i2cmux-0 {
|
|
marvell,pins = "twsi";
|
|
marvell,function = "twsi-opt1";
|
|
};
|
|
|
|
pmx_i2cmux_1: pmx-i2cmux-1 {
|
|
marvell,pins = "twsi";
|
|
marvell,function = "twsi-opt2";
|
|
};
|
|
|
|
pmx_i2cmux_2: pmx-i2cmux-2 {
|
|
marvell,pins = "twsi";
|
|
marvell,function = "twsi-opt3";
|
|
};
|
|
};
|
|
|
|
core_clk: core-clocks@0214 {
|
|
compatible = "marvell,dove-core-clock";
|
|
reg = <0x0214 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
gpio0: gpio-ctrl@0400 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x0400 0x20>;
|
|
ngpios = <32>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <12>, <13>, <14>, <60>;
|
|
};
|
|
|
|
gpio1: gpio-ctrl@0420 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x0420 0x20>;
|
|
ngpios = <32>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <61>;
|
|
};
|
|
|
|
rtc: real-time-clock@8500 {
|
|
compatible = "marvell,orion-rtc";
|
|
reg = <0x8500 0x20>;
|
|
interrupts = <5>;
|
|
};
|
|
};
|
|
|
|
gconf: global-config@e802c {
|
|
compatible = "marvell,dove-global-config",
|
|
"syscon";
|
|
reg = <0xe802c 0x14>;
|
|
};
|
|
|
|
gpio2: gpio-ctrl@e8400 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0xe8400 0x0c>;
|
|
ngpios = <8>;
|
|
};
|
|
|
|
lcd1: lcd-controller@810000 {
|
|
compatible = "marvell,dove-lcd";
|
|
reg = <0x810000 0x1000>;
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lcd0: lcd-controller@820000 {
|
|
compatible = "marvell,dove-lcd";
|
|
reg = <0x820000 0x1000>;
|
|
interrupts = <47>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto_sram: sa-sram@ffffe000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xffffe000 0x800>;
|
|
clocks = <&gate_clk 15>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|