mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2359 lines
72 KiB
C
2359 lines
72 KiB
C
/* pcnet32.c: An AMD PCnet32 ethernet driver for linux. */
|
|
/*
|
|
* Copyright 1996-1999 Thomas Bogendoerfer
|
|
*
|
|
* Derived from the lance driver written 1993,1994,1995 by Donald Becker.
|
|
*
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency.
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
* This driver is for PCnet32 and PCnetPCI based ethercards
|
|
*/
|
|
/**************************************************************************
|
|
* 23 Oct, 2000.
|
|
* Fixed a few bugs, related to running the controller in 32bit mode.
|
|
*
|
|
* Carsten Langgaard, carstenl@mips.com
|
|
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
*************************************************************************/
|
|
|
|
#define DRV_NAME "pcnet32"
|
|
#define DRV_VERSION "1.30i"
|
|
#define DRV_RELDATE "06.28.2004"
|
|
#define PFX DRV_NAME ": "
|
|
|
|
static const char *version =
|
|
DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n";
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/irq.h>
|
|
|
|
/*
|
|
* PCI device identifiers for "new style" Linux PCI Device Drivers
|
|
*/
|
|
static struct pci_device_id pcnet32_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
/*
|
|
* Adapters that were sold with IBM's RS/6000 or pSeries hardware have
|
|
* the incorrect vendor id.
|
|
*/
|
|
{ PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0 },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, pcnet32_pci_tbl);
|
|
|
|
static int cards_found;
|
|
|
|
/*
|
|
* VLB I/O addresses
|
|
*/
|
|
static unsigned int pcnet32_portlist[] __initdata =
|
|
{ 0x300, 0x320, 0x340, 0x360, 0 };
|
|
|
|
|
|
|
|
static int pcnet32_debug = 0;
|
|
static int tx_start = 1; /* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */
|
|
static int pcnet32vlb; /* check for VLB cards ? */
|
|
|
|
static struct net_device *pcnet32_dev;
|
|
|
|
static int max_interrupt_work = 2;
|
|
static int rx_copybreak = 200;
|
|
|
|
#define PCNET32_PORT_AUI 0x00
|
|
#define PCNET32_PORT_10BT 0x01
|
|
#define PCNET32_PORT_GPSI 0x02
|
|
#define PCNET32_PORT_MII 0x03
|
|
|
|
#define PCNET32_PORT_PORTSEL 0x03
|
|
#define PCNET32_PORT_ASEL 0x04
|
|
#define PCNET32_PORT_100 0x40
|
|
#define PCNET32_PORT_FD 0x80
|
|
|
|
#define PCNET32_DMA_MASK 0xffffffff
|
|
|
|
#define PCNET32_WATCHDOG_TIMEOUT (jiffies + (2 * HZ))
|
|
#define PCNET32_BLINK_TIMEOUT (jiffies + (HZ/4))
|
|
|
|
/*
|
|
* table to translate option values from tulip
|
|
* to internal options
|
|
*/
|
|
static unsigned char options_mapping[] = {
|
|
PCNET32_PORT_ASEL, /* 0 Auto-select */
|
|
PCNET32_PORT_AUI, /* 1 BNC/AUI */
|
|
PCNET32_PORT_AUI, /* 2 AUI/BNC */
|
|
PCNET32_PORT_ASEL, /* 3 not supported */
|
|
PCNET32_PORT_10BT | PCNET32_PORT_FD, /* 4 10baseT-FD */
|
|
PCNET32_PORT_ASEL, /* 5 not supported */
|
|
PCNET32_PORT_ASEL, /* 6 not supported */
|
|
PCNET32_PORT_ASEL, /* 7 not supported */
|
|
PCNET32_PORT_ASEL, /* 8 not supported */
|
|
PCNET32_PORT_MII, /* 9 MII 10baseT */
|
|
PCNET32_PORT_MII | PCNET32_PORT_FD, /* 10 MII 10baseT-FD */
|
|
PCNET32_PORT_MII, /* 11 MII (autosel) */
|
|
PCNET32_PORT_10BT, /* 12 10BaseT */
|
|
PCNET32_PORT_MII | PCNET32_PORT_100, /* 13 MII 100BaseTx */
|
|
PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, /* 14 MII 100BaseTx-FD */
|
|
PCNET32_PORT_ASEL /* 15 not supported */
|
|
};
|
|
|
|
static const char pcnet32_gstrings_test[][ETH_GSTRING_LEN] = {
|
|
"Loopback test (offline)"
|
|
};
|
|
#define PCNET32_TEST_LEN (sizeof(pcnet32_gstrings_test) / ETH_GSTRING_LEN)
|
|
|
|
#define PCNET32_NUM_REGS 168
|
|
|
|
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
|
static int options[MAX_UNITS];
|
|
static int full_duplex[MAX_UNITS];
|
|
static int homepna[MAX_UNITS];
|
|
|
|
/*
|
|
* Theory of Operation
|
|
*
|
|
* This driver uses the same software structure as the normal lance
|
|
* driver. So look for a verbose description in lance.c. The differences
|
|
* to the normal lance driver is the use of the 32bit mode of PCnet32
|
|
* and PCnetPCI chips. Because these chips are 32bit chips, there is no
|
|
* 16MB limitation and we don't need bounce buffers.
|
|
*/
|
|
|
|
/*
|
|
* History:
|
|
* v0.01: Initial version
|
|
* only tested on Alpha Noname Board
|
|
* v0.02: changed IRQ handling for new interrupt scheme (dev_id)
|
|
* tested on a ASUS SP3G
|
|
* v0.10: fixed an odd problem with the 79C974 in a Compaq Deskpro XL
|
|
* looks like the 974 doesn't like stopping and restarting in a
|
|
* short period of time; now we do a reinit of the lance; the
|
|
* bug was triggered by doing ifconfig eth0 <ip> broadcast <addr>
|
|
* and hangs the machine (thanks to Klaus Liedl for debugging)
|
|
* v0.12: by suggestion from Donald Becker: Renamed driver to pcnet32,
|
|
* made it standalone (no need for lance.c)
|
|
* v0.13: added additional PCI detecting for special PCI devices (Compaq)
|
|
* v0.14: stripped down additional PCI probe (thanks to David C Niemi
|
|
* and sveneric@xs4all.nl for testing this on their Compaq boxes)
|
|
* v0.15: added 79C965 (VLB) probe
|
|
* added interrupt sharing for PCI chips
|
|
* v0.16: fixed set_multicast_list on Alpha machines
|
|
* v0.17: removed hack from dev.c; now pcnet32 uses ethif_probe in Space.c
|
|
* v0.19: changed setting of autoselect bit
|
|
* v0.20: removed additional Compaq PCI probe; there is now a working one
|
|
* in arch/i386/bios32.c
|
|
* v0.21: added endian conversion for ppc, from work by cort@cs.nmt.edu
|
|
* v0.22: added printing of status to ring dump
|
|
* v0.23: changed enet_statistics to net_devive_stats
|
|
* v0.90: added multicast filter
|
|
* added module support
|
|
* changed irq probe to new style
|
|
* added PCnetFast chip id
|
|
* added fix for receive stalls with Intel saturn chipsets
|
|
* added in-place rx skbs like in the tulip driver
|
|
* minor cleanups
|
|
* v0.91: added PCnetFast+ chip id
|
|
* back port to 2.0.x
|
|
* v1.00: added some stuff from Donald Becker's 2.0.34 version
|
|
* added support for byte counters in net_dev_stats
|
|
* v1.01: do ring dumps, only when debugging the driver
|
|
* increased the transmit timeout
|
|
* v1.02: fixed memory leak in pcnet32_init_ring()
|
|
* v1.10: workaround for stopped transmitter
|
|
* added port selection for modules
|
|
* detect special T1/E1 WAN card and setup port selection
|
|
* v1.11: fixed wrong checking of Tx errors
|
|
* v1.20: added check of return value kmalloc (cpeterso@cs.washington.edu)
|
|
* added save original kmalloc addr for freeing (mcr@solidum.com)
|
|
* added support for PCnetHome chip (joe@MIT.EDU)
|
|
* rewritten PCI card detection
|
|
* added dwio mode to get driver working on some PPC machines
|
|
* v1.21: added mii selection and mii ioctl
|
|
* v1.22: changed pci scanning code to make PPC people happy
|
|
* fixed switching to 32bit mode in pcnet32_open() (thanks
|
|
* to Michael Richard <mcr@solidum.com> for noticing this one)
|
|
* added sub vendor/device id matching (thanks again to
|
|
* Michael Richard <mcr@solidum.com>)
|
|
* added chip id for 79c973/975 (thanks to Zach Brown <zab@zabbo.net>)
|
|
* v1.23 fixed small bug, when manual selecting MII speed/duplex
|
|
* v1.24 Applied Thomas' patch to use TxStartPoint and thus decrease TxFIFO
|
|
* underflows. Added tx_start_pt module parameter. Increased
|
|
* TX_RING_SIZE from 16 to 32. Added #ifdef'd code to use DXSUFLO
|
|
* for FAST[+] chipsets. <kaf@fc.hp.com>
|
|
* v1.24ac Added SMP spinlocking - Alan Cox <alan@redhat.com>
|
|
* v1.25kf Added No Interrupt on successful Tx for some Tx's <kaf@fc.hp.com>
|
|
* v1.26 Converted to pci_alloc_consistent, Jamey Hicks / George France
|
|
* <jamey@crl.dec.com>
|
|
* - Fixed a few bugs, related to running the controller in 32bit mode.
|
|
* 23 Oct, 2000. Carsten Langgaard, carstenl@mips.com
|
|
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
* v1.26p Fix oops on rmmod+insmod; plug i/o resource leak - Paul Gortmaker
|
|
* v1.27 improved CSR/PROM address detection, lots of cleanups,
|
|
* new pcnet32vlb module option, HP-PARISC support,
|
|
* added module parameter descriptions,
|
|
* initial ethtool support - Helge Deller <deller@gmx.de>
|
|
* v1.27a Sun Feb 10 2002 Go Taniguchi <go@turbolinux.co.jp>
|
|
* use alloc_etherdev and register_netdev
|
|
* fix pci probe not increment cards_found
|
|
* FD auto negotiate error workaround for xSeries250
|
|
* clean up and using new mii module
|
|
* v1.27b Sep 30 2002 Kent Yoder <yoder1@us.ibm.com>
|
|
* Added timer for cable connection state changes.
|
|
* v1.28 20 Feb 2004 Don Fry <brazilnut@us.ibm.com>
|
|
* Jon Mason <jonmason@us.ibm.com>, Chinmay Albal <albal@in.ibm.com>
|
|
* Now uses ethtool_ops, netif_msg_* and generic_mii_ioctl.
|
|
* Fixes bogus 'Bus master arbitration failure', pci_[un]map_single
|
|
* length errors, and transmit hangs. Cleans up after errors in open.
|
|
* Jim Lewis <jklewis@us.ibm.com> added ethernet loopback test.
|
|
* Thomas Munck Steenholdt <tmus@tmus.dk> non-mii ioctl corrections.
|
|
* v1.29 6 Apr 2004 Jim Lewis <jklewis@us.ibm.com> added physical
|
|
* identification code (blink led's) and register dump.
|
|
* Don Fry added timer for 971/972 so skbufs don't remain on tx ring
|
|
* forever.
|
|
* v1.30 18 May 2004 Don Fry removed timer and Last Transmit Interrupt
|
|
* (ltint) as they added complexity and didn't give good throughput.
|
|
* v1.30a 22 May 2004 Don Fry limit frames received during interrupt.
|
|
* v1.30b 24 May 2004 Don Fry fix bogus tx carrier errors with 79c973,
|
|
* assisted by Bruce Penrod <bmpenrod@endruntechnologies.com>.
|
|
* v1.30c 25 May 2004 Don Fry added netif_wake_queue after pcnet32_restart.
|
|
* v1.30d 01 Jun 2004 Don Fry discard oversize rx packets.
|
|
* v1.30e 11 Jun 2004 Don Fry recover after fifo error and rx hang.
|
|
* v1.30f 16 Jun 2004 Don Fry cleanup IRQ to allow 0 and 1 for PCI,
|
|
* expanding on suggestions from Ralf Baechle <ralf@linux-mips.org>,
|
|
* and Brian Murphy <brian@murphy.dk>.
|
|
* v1.30g 22 Jun 2004 Patrick Simmons <psimmons@flash.net> added option
|
|
* homepna for selecting HomePNA mode for PCNet/Home 79C978.
|
|
* v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32.
|
|
* v1.30i 28 Jun 2004 Don Fry change to use module_param.
|
|
*/
|
|
|
|
|
|
/*
|
|
* Set the number of Tx and Rx buffers, using Log_2(# buffers).
|
|
* Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
|
|
* That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
|
|
*/
|
|
#ifndef PCNET32_LOG_TX_BUFFERS
|
|
#define PCNET32_LOG_TX_BUFFERS 4
|
|
#define PCNET32_LOG_RX_BUFFERS 5
|
|
#endif
|
|
|
|
#define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS))
|
|
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
|
#define TX_RING_LEN_BITS ((PCNET32_LOG_TX_BUFFERS) << 12)
|
|
|
|
#define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS))
|
|
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
|
#define RX_RING_LEN_BITS ((PCNET32_LOG_RX_BUFFERS) << 4)
|
|
|
|
#define PKT_BUF_SZ 1544
|
|
|
|
/* Offsets from base I/O address. */
|
|
#define PCNET32_WIO_RDP 0x10
|
|
#define PCNET32_WIO_RAP 0x12
|
|
#define PCNET32_WIO_RESET 0x14
|
|
#define PCNET32_WIO_BDP 0x16
|
|
|
|
#define PCNET32_DWIO_RDP 0x10
|
|
#define PCNET32_DWIO_RAP 0x14
|
|
#define PCNET32_DWIO_RESET 0x18
|
|
#define PCNET32_DWIO_BDP 0x1C
|
|
|
|
#define PCNET32_TOTAL_SIZE 0x20
|
|
|
|
/* The PCNET32 Rx and Tx ring descriptors. */
|
|
struct pcnet32_rx_head {
|
|
u32 base;
|
|
s16 buf_length;
|
|
s16 status;
|
|
u32 msg_length;
|
|
u32 reserved;
|
|
};
|
|
|
|
struct pcnet32_tx_head {
|
|
u32 base;
|
|
s16 length;
|
|
s16 status;
|
|
u32 misc;
|
|
u32 reserved;
|
|
};
|
|
|
|
/* The PCNET32 32-Bit initialization block, described in databook. */
|
|
struct pcnet32_init_block {
|
|
u16 mode;
|
|
u16 tlen_rlen;
|
|
u8 phys_addr[6];
|
|
u16 reserved;
|
|
u32 filter[2];
|
|
/* Receive and transmit ring base, along with extra bits. */
|
|
u32 rx_ring;
|
|
u32 tx_ring;
|
|
};
|
|
|
|
/* PCnet32 access functions */
|
|
struct pcnet32_access {
|
|
u16 (*read_csr)(unsigned long, int);
|
|
void (*write_csr)(unsigned long, int, u16);
|
|
u16 (*read_bcr)(unsigned long, int);
|
|
void (*write_bcr)(unsigned long, int, u16);
|
|
u16 (*read_rap)(unsigned long);
|
|
void (*write_rap)(unsigned long, u16);
|
|
void (*reset)(unsigned long);
|
|
};
|
|
|
|
/*
|
|
* The first three fields of pcnet32_private are read by the ethernet device
|
|
* so we allocate the structure should be allocated by pci_alloc_consistent().
|
|
*/
|
|
struct pcnet32_private {
|
|
/* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */
|
|
struct pcnet32_rx_head rx_ring[RX_RING_SIZE];
|
|
struct pcnet32_tx_head tx_ring[TX_RING_SIZE];
|
|
struct pcnet32_init_block init_block;
|
|
dma_addr_t dma_addr; /* DMA address of beginning of this
|
|
object, returned by
|
|
pci_alloc_consistent */
|
|
struct pci_dev *pci_dev; /* Pointer to the associated pci device
|
|
structure */
|
|
const char *name;
|
|
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
|
|
struct sk_buff *tx_skbuff[TX_RING_SIZE];
|
|
struct sk_buff *rx_skbuff[RX_RING_SIZE];
|
|
dma_addr_t tx_dma_addr[TX_RING_SIZE];
|
|
dma_addr_t rx_dma_addr[RX_RING_SIZE];
|
|
struct pcnet32_access a;
|
|
spinlock_t lock; /* Guard lock */
|
|
unsigned int cur_rx, cur_tx; /* The next free ring entry */
|
|
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
|
|
struct net_device_stats stats;
|
|
char tx_full;
|
|
int options;
|
|
unsigned int shared_irq:1, /* shared irq possible */
|
|
dxsuflo:1, /* disable transmit stop on uflo */
|
|
mii:1; /* mii port available */
|
|
struct net_device *next;
|
|
struct mii_if_info mii_if;
|
|
struct timer_list watchdog_timer;
|
|
struct timer_list blink_timer;
|
|
u32 msg_enable; /* debug message level */
|
|
};
|
|
|
|
static void pcnet32_probe_vlbus(void);
|
|
static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *);
|
|
static int pcnet32_probe1(unsigned long, int, struct pci_dev *);
|
|
static int pcnet32_open(struct net_device *);
|
|
static int pcnet32_init_ring(struct net_device *);
|
|
static int pcnet32_start_xmit(struct sk_buff *, struct net_device *);
|
|
static int pcnet32_rx(struct net_device *);
|
|
static void pcnet32_tx_timeout (struct net_device *dev);
|
|
static irqreturn_t pcnet32_interrupt(int, void *, struct pt_regs *);
|
|
static int pcnet32_close(struct net_device *);
|
|
static struct net_device_stats *pcnet32_get_stats(struct net_device *);
|
|
static void pcnet32_load_multicast(struct net_device *dev);
|
|
static void pcnet32_set_multicast_list(struct net_device *);
|
|
static int pcnet32_ioctl(struct net_device *, struct ifreq *, int);
|
|
static void pcnet32_watchdog(struct net_device *);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int reg_num);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val);
|
|
static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits);
|
|
static void pcnet32_ethtool_test(struct net_device *dev,
|
|
struct ethtool_test *eth_test, u64 *data);
|
|
static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1);
|
|
static int pcnet32_phys_id(struct net_device *dev, u32 data);
|
|
static void pcnet32_led_blink_callback(struct net_device *dev);
|
|
static int pcnet32_get_regs_len(struct net_device *dev);
|
|
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
|
|
void *ptr);
|
|
|
|
enum pci_flags_bit {
|
|
PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
|
|
PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
|
|
};
|
|
|
|
|
|
static u16 pcnet32_wio_read_csr (unsigned long addr, int index)
|
|
{
|
|
outw (index, addr+PCNET32_WIO_RAP);
|
|
return inw (addr+PCNET32_WIO_RDP);
|
|
}
|
|
|
|
static void pcnet32_wio_write_csr (unsigned long addr, int index, u16 val)
|
|
{
|
|
outw (index, addr+PCNET32_WIO_RAP);
|
|
outw (val, addr+PCNET32_WIO_RDP);
|
|
}
|
|
|
|
static u16 pcnet32_wio_read_bcr (unsigned long addr, int index)
|
|
{
|
|
outw (index, addr+PCNET32_WIO_RAP);
|
|
return inw (addr+PCNET32_WIO_BDP);
|
|
}
|
|
|
|
static void pcnet32_wio_write_bcr (unsigned long addr, int index, u16 val)
|
|
{
|
|
outw (index, addr+PCNET32_WIO_RAP);
|
|
outw (val, addr+PCNET32_WIO_BDP);
|
|
}
|
|
|
|
static u16 pcnet32_wio_read_rap (unsigned long addr)
|
|
{
|
|
return inw (addr+PCNET32_WIO_RAP);
|
|
}
|
|
|
|
static void pcnet32_wio_write_rap (unsigned long addr, u16 val)
|
|
{
|
|
outw (val, addr+PCNET32_WIO_RAP);
|
|
}
|
|
|
|
static void pcnet32_wio_reset (unsigned long addr)
|
|
{
|
|
inw (addr+PCNET32_WIO_RESET);
|
|
}
|
|
|
|
static int pcnet32_wio_check (unsigned long addr)
|
|
{
|
|
outw (88, addr+PCNET32_WIO_RAP);
|
|
return (inw (addr+PCNET32_WIO_RAP) == 88);
|
|
}
|
|
|
|
static struct pcnet32_access pcnet32_wio = {
|
|
.read_csr = pcnet32_wio_read_csr,
|
|
.write_csr = pcnet32_wio_write_csr,
|
|
.read_bcr = pcnet32_wio_read_bcr,
|
|
.write_bcr = pcnet32_wio_write_bcr,
|
|
.read_rap = pcnet32_wio_read_rap,
|
|
.write_rap = pcnet32_wio_write_rap,
|
|
.reset = pcnet32_wio_reset
|
|
};
|
|
|
|
static u16 pcnet32_dwio_read_csr (unsigned long addr, int index)
|
|
{
|
|
outl (index, addr+PCNET32_DWIO_RAP);
|
|
return (inl (addr+PCNET32_DWIO_RDP) & 0xffff);
|
|
}
|
|
|
|
static void pcnet32_dwio_write_csr (unsigned long addr, int index, u16 val)
|
|
{
|
|
outl (index, addr+PCNET32_DWIO_RAP);
|
|
outl (val, addr+PCNET32_DWIO_RDP);
|
|
}
|
|
|
|
static u16 pcnet32_dwio_read_bcr (unsigned long addr, int index)
|
|
{
|
|
outl (index, addr+PCNET32_DWIO_RAP);
|
|
return (inl (addr+PCNET32_DWIO_BDP) & 0xffff);
|
|
}
|
|
|
|
static void pcnet32_dwio_write_bcr (unsigned long addr, int index, u16 val)
|
|
{
|
|
outl (index, addr+PCNET32_DWIO_RAP);
|
|
outl (val, addr+PCNET32_DWIO_BDP);
|
|
}
|
|
|
|
static u16 pcnet32_dwio_read_rap (unsigned long addr)
|
|
{
|
|
return (inl (addr+PCNET32_DWIO_RAP) & 0xffff);
|
|
}
|
|
|
|
static void pcnet32_dwio_write_rap (unsigned long addr, u16 val)
|
|
{
|
|
outl (val, addr+PCNET32_DWIO_RAP);
|
|
}
|
|
|
|
static void pcnet32_dwio_reset (unsigned long addr)
|
|
{
|
|
inl (addr+PCNET32_DWIO_RESET);
|
|
}
|
|
|
|
static int pcnet32_dwio_check (unsigned long addr)
|
|
{
|
|
outl (88, addr+PCNET32_DWIO_RAP);
|
|
return ((inl (addr+PCNET32_DWIO_RAP) & 0xffff) == 88);
|
|
}
|
|
|
|
static struct pcnet32_access pcnet32_dwio = {
|
|
.read_csr = pcnet32_dwio_read_csr,
|
|
.write_csr = pcnet32_dwio_write_csr,
|
|
.read_bcr = pcnet32_dwio_read_bcr,
|
|
.write_bcr = pcnet32_dwio_write_bcr,
|
|
.read_rap = pcnet32_dwio_read_rap,
|
|
.write_rap = pcnet32_dwio_write_rap,
|
|
.reset = pcnet32_dwio_reset
|
|
};
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void pcnet32_poll_controller(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
pcnet32_interrupt(0, dev, NULL);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
|
|
static int pcnet32_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long flags;
|
|
int r = -EOPNOTSUPP;
|
|
|
|
if (lp->mii) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
mii_ethtool_gset(&lp->mii_if, cmd);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
r = 0;
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static int pcnet32_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long flags;
|
|
int r = -EOPNOTSUPP;
|
|
|
|
if (lp->mii) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
r = mii_ethtool_sset(&lp->mii_if, cmd);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static void pcnet32_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
|
|
strcpy (info->driver, DRV_NAME);
|
|
strcpy (info->version, DRV_VERSION);
|
|
if (lp->pci_dev)
|
|
strcpy (info->bus_info, pci_name(lp->pci_dev));
|
|
else
|
|
sprintf(info->bus_info, "VLB 0x%lx", dev->base_addr);
|
|
}
|
|
|
|
static u32 pcnet32_get_link(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long flags;
|
|
int r;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
if (lp->mii) {
|
|
r = mii_link_ok(&lp->mii_if);
|
|
} else {
|
|
ulong ioaddr = dev->base_addr; /* card base I/O address */
|
|
r = (lp->a.read_bcr(ioaddr, 4) != 0xc0);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
static u32 pcnet32_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
return lp->msg_enable;
|
|
}
|
|
|
|
static void pcnet32_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
lp->msg_enable = value;
|
|
}
|
|
|
|
static int pcnet32_nway_reset(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long flags;
|
|
int r = -EOPNOTSUPP;
|
|
|
|
if (lp->mii) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
r = mii_nway_restart(&lp->mii_if);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static void pcnet32_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
|
|
ering->tx_max_pending = TX_RING_SIZE - 1;
|
|
ering->tx_pending = lp->cur_tx - lp->dirty_tx;
|
|
ering->rx_max_pending = RX_RING_SIZE - 1;
|
|
ering->rx_pending = lp->cur_rx & RX_RING_MOD_MASK;
|
|
}
|
|
|
|
static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data)
|
|
{
|
|
memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test));
|
|
}
|
|
|
|
static int pcnet32_self_test_count(struct net_device *dev)
|
|
{
|
|
return PCNET32_TEST_LEN;
|
|
}
|
|
|
|
static void pcnet32_ethtool_test(struct net_device *dev,
|
|
struct ethtool_test *test, u64 *data)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int rc;
|
|
|
|
if (test->flags == ETH_TEST_FL_OFFLINE) {
|
|
rc = pcnet32_loopback_test(dev, data);
|
|
if (rc) {
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: Loopback test failed.\n", dev->name);
|
|
test->flags |= ETH_TEST_FL_FAILED;
|
|
} else if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: Loopback test passed.\n", dev->name);
|
|
} else if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: No tests to run (specify 'Offline' on ethtool).", dev->name);
|
|
} /* end pcnet32_ethtool_test */
|
|
|
|
static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
struct pcnet32_access *a = &lp->a; /* access to registers */
|
|
ulong ioaddr = dev->base_addr; /* card base I/O address */
|
|
struct sk_buff *skb; /* sk buff */
|
|
int x, i; /* counters */
|
|
int numbuffs = 4; /* number of TX/RX buffers and descs */
|
|
u16 status = 0x8300; /* TX ring status */
|
|
u16 teststatus; /* test of ring status */
|
|
int rc; /* return code */
|
|
int size; /* size of packets */
|
|
unsigned char *packet; /* source packet data */
|
|
static int data_len = 60; /* length of source packets */
|
|
unsigned long flags;
|
|
unsigned long ticks;
|
|
|
|
*data1 = 1; /* status of test, default to fail */
|
|
rc = 1; /* default to fail */
|
|
|
|
if (netif_running(dev))
|
|
pcnet32_close(dev);
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
/* Reset the PCNET32 */
|
|
lp->a.reset (ioaddr);
|
|
|
|
/* switch pcnet32 to 32bit mode */
|
|
lp->a.write_bcr (ioaddr, 20, 2);
|
|
|
|
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
|
|
lp->init_block.filter[0] = 0;
|
|
lp->init_block.filter[1] = 0;
|
|
|
|
/* purge & init rings but don't actually restart */
|
|
pcnet32_restart(dev, 0x0000);
|
|
|
|
lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */
|
|
|
|
/* Initialize Transmit buffers. */
|
|
size = data_len + 15;
|
|
for (x=0; x<numbuffs; x++) {
|
|
if (!(skb = dev_alloc_skb(size))) {
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: Cannot allocate skb at line: %d!\n",
|
|
dev->name, __LINE__);
|
|
goto clean_up;
|
|
} else {
|
|
packet = skb->data;
|
|
skb_put(skb, size); /* create space for data */
|
|
lp->tx_skbuff[x] = skb;
|
|
lp->tx_ring[x].length = le16_to_cpu(-skb->len);
|
|
lp->tx_ring[x].misc = 0;
|
|
|
|
/* put DA and SA into the skb */
|
|
for (i=0; i<6; i++)
|
|
*packet++ = dev->dev_addr[i];
|
|
for (i=0; i<6; i++)
|
|
*packet++ = dev->dev_addr[i];
|
|
/* type */
|
|
*packet++ = 0x08;
|
|
*packet++ = 0x06;
|
|
/* packet number */
|
|
*packet++ = x;
|
|
/* fill packet with data */
|
|
for (i=0; i<data_len; i++)
|
|
*packet++ = i;
|
|
|
|
lp->tx_dma_addr[x] = pci_map_single(lp->pci_dev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_ring[x].base = (u32)le32_to_cpu(lp->tx_dma_addr[x]);
|
|
wmb(); /* Make sure owner changes after all others are visible */
|
|
lp->tx_ring[x].status = le16_to_cpu(status);
|
|
}
|
|
}
|
|
|
|
x = a->read_bcr(ioaddr, 32); /* set internal loopback in BSR32 */
|
|
x = x | 0x0002;
|
|
a->write_bcr(ioaddr, 32, x);
|
|
|
|
lp->a.write_csr (ioaddr, 15, 0x0044); /* set int loopback in CSR15 */
|
|
|
|
teststatus = le16_to_cpu(0x8000);
|
|
lp->a.write_csr(ioaddr, 0, 0x0002); /* Set STRT bit */
|
|
|
|
/* Check status of descriptors */
|
|
for (x=0; x<numbuffs; x++) {
|
|
ticks = 0;
|
|
rmb();
|
|
while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) {
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
mdelay(1);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
rmb();
|
|
ticks++;
|
|
}
|
|
if (ticks == 200) {
|
|
if (netif_msg_hw(lp))
|
|
printk("%s: Desc %d failed to reset!\n",dev->name,x);
|
|
break;
|
|
}
|
|
}
|
|
|
|
lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */
|
|
wmb();
|
|
if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) {
|
|
printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name);
|
|
|
|
for (x=0; x<numbuffs; x++) {
|
|
printk(KERN_DEBUG "%s: Packet %d:\n", dev->name, x);
|
|
skb = lp->rx_skbuff[x];
|
|
for (i=0; i<size; i++) {
|
|
printk("%02x ", *(skb->data+i));
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
x = 0;
|
|
rc = 0;
|
|
while (x<numbuffs && !rc) {
|
|
skb = lp->rx_skbuff[x];
|
|
packet = lp->tx_skbuff[x]->data;
|
|
for (i=0; i<size; i++) {
|
|
if (*(skb->data+i) != packet[i]) {
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: Error in compare! %2x - %02x %02x\n",
|
|
dev->name, i, *(skb->data+i), packet[i]);
|
|
rc = 1;
|
|
break;
|
|
}
|
|
}
|
|
x++;
|
|
}
|
|
if (!rc) {
|
|
*data1 = 0;
|
|
}
|
|
|
|
clean_up:
|
|
x = a->read_csr(ioaddr, 15) & 0xFFFF;
|
|
a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */
|
|
|
|
x = a->read_bcr(ioaddr, 32); /* reset internal loopback */
|
|
x = x & ~0x0002;
|
|
a->write_bcr(ioaddr, 32, x);
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
if (netif_running(dev)) {
|
|
pcnet32_open(dev);
|
|
} else {
|
|
lp->a.write_bcr (ioaddr, 20, 4); /* return to 16bit mode */
|
|
}
|
|
|
|
return(rc);
|
|
} /* end pcnet32_loopback_test */
|
|
|
|
static void pcnet32_led_blink_callback(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
struct pcnet32_access *a = &lp->a;
|
|
ulong ioaddr = dev->base_addr;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
for (i=4; i<8; i++) {
|
|
a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT);
|
|
}
|
|
|
|
static int pcnet32_phys_id(struct net_device *dev, u32 data)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
struct pcnet32_access *a = &lp->a;
|
|
ulong ioaddr = dev->base_addr;
|
|
unsigned long flags;
|
|
int i, regs[4];
|
|
|
|
if (!lp->blink_timer.function) {
|
|
init_timer(&lp->blink_timer);
|
|
lp->blink_timer.function = (void *) pcnet32_led_blink_callback;
|
|
lp->blink_timer.data = (unsigned long) dev;
|
|
}
|
|
|
|
/* Save the current value of the bcrs */
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
for (i=4; i<8; i++) {
|
|
regs[i-4] = a->read_bcr(ioaddr, i);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
mod_timer(&lp->blink_timer, jiffies);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
if ((!data) || (data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)))
|
|
data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
|
|
|
|
schedule_timeout(data * HZ);
|
|
del_timer_sync(&lp->blink_timer);
|
|
|
|
/* Restore the original value of the bcrs */
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
for (i=4; i<8; i++) {
|
|
a->write_bcr(ioaddr, i, regs[i-4]);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcnet32_get_regs_len(struct net_device *dev)
|
|
{
|
|
return(PCNET32_NUM_REGS * sizeof(u16));
|
|
}
|
|
|
|
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
|
|
void *ptr)
|
|
{
|
|
int i, csr0;
|
|
u16 *buff = ptr;
|
|
struct pcnet32_private *lp = dev->priv;
|
|
struct pcnet32_access *a = &lp->a;
|
|
ulong ioaddr = dev->base_addr;
|
|
int ticks;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
csr0 = a->read_csr(ioaddr, 0);
|
|
if (!(csr0 & 0x0004)) { /* If not stopped */
|
|
/* set SUSPEND (SPND) - CSR5 bit 0 */
|
|
a->write_csr(ioaddr, 5, 0x0001);
|
|
|
|
/* poll waiting for bit to be set */
|
|
ticks = 0;
|
|
while (!(a->read_csr(ioaddr, 5) & 0x0001)) {
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
mdelay(1);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
ticks++;
|
|
if (ticks > 200) {
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_DEBUG "%s: Error getting into suspend!\n",
|
|
dev->name);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* read address PROM */
|
|
for (i=0; i<16; i += 2)
|
|
*buff++ = inw(ioaddr + i);
|
|
|
|
/* read control and status registers */
|
|
for (i=0; i<90; i++) {
|
|
*buff++ = a->read_csr(ioaddr, i);
|
|
}
|
|
|
|
*buff++ = a->read_csr(ioaddr, 112);
|
|
*buff++ = a->read_csr(ioaddr, 114);
|
|
|
|
/* read bus configuration registers */
|
|
for (i=0; i<36; i++) {
|
|
*buff++ = a->read_bcr(ioaddr, i);
|
|
}
|
|
|
|
/* read mii phy registers */
|
|
if (lp->mii) {
|
|
for (i=0; i<32; i++) {
|
|
lp->a.write_bcr(ioaddr, 33, ((lp->mii_if.phy_id) << 5) | i);
|
|
*buff++ = lp->a.read_bcr(ioaddr, 34);
|
|
}
|
|
}
|
|
|
|
if (!(csr0 & 0x0004)) { /* If not stopped */
|
|
/* clear SUSPEND (SPND) - CSR5 bit 0 */
|
|
a->write_csr(ioaddr, 5, 0x0000);
|
|
}
|
|
|
|
i = buff - (u16 *)ptr;
|
|
for (; i < PCNET32_NUM_REGS; i++)
|
|
*buff++ = 0;
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
static struct ethtool_ops pcnet32_ethtool_ops = {
|
|
.get_settings = pcnet32_get_settings,
|
|
.set_settings = pcnet32_set_settings,
|
|
.get_drvinfo = pcnet32_get_drvinfo,
|
|
.get_msglevel = pcnet32_get_msglevel,
|
|
.set_msglevel = pcnet32_set_msglevel,
|
|
.nway_reset = pcnet32_nway_reset,
|
|
.get_link = pcnet32_get_link,
|
|
.get_ringparam = pcnet32_get_ringparam,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
.get_sg = ethtool_op_get_sg,
|
|
.get_tso = ethtool_op_get_tso,
|
|
.get_strings = pcnet32_get_strings,
|
|
.self_test_count = pcnet32_self_test_count,
|
|
.self_test = pcnet32_ethtool_test,
|
|
.phys_id = pcnet32_phys_id,
|
|
.get_regs_len = pcnet32_get_regs_len,
|
|
.get_regs = pcnet32_get_regs,
|
|
};
|
|
|
|
/* only probes for non-PCI devices, the rest are handled by
|
|
* pci_register_driver via pcnet32_probe_pci */
|
|
|
|
static void __devinit
|
|
pcnet32_probe_vlbus(void)
|
|
{
|
|
unsigned int *port, ioaddr;
|
|
|
|
/* search for PCnet32 VLB cards at known addresses */
|
|
for (port = pcnet32_portlist; (ioaddr = *port); port++) {
|
|
if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) {
|
|
/* check if there is really a pcnet chip on that ioaddr */
|
|
if ((inb(ioaddr + 14) == 0x57) && (inb(ioaddr + 15) == 0x57)) {
|
|
pcnet32_probe1(ioaddr, 0, NULL);
|
|
} else {
|
|
release_region(ioaddr, PCNET32_TOTAL_SIZE);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static int __devinit
|
|
pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
unsigned long ioaddr;
|
|
int err;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err < 0) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "failed to enable device -- err=%d\n", err);
|
|
return err;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
ioaddr = pci_resource_start (pdev, 0);
|
|
if (!ioaddr) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk (KERN_ERR PFX "card has no PCI IO resources, aborting\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!pci_dma_supported(pdev, PCNET32_DMA_MASK)) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "architecture does not support 32bit PCI busmaster DMA\n");
|
|
return -ENODEV;
|
|
}
|
|
if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") == NULL) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "io address range already allocated\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
err = pcnet32_probe1(ioaddr, 1, pdev);
|
|
if (err < 0) {
|
|
pci_disable_device(pdev);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
|
|
/* pcnet32_probe1
|
|
* Called from both pcnet32_probe_vlbus and pcnet_probe_pci.
|
|
* pdev will be NULL when called from pcnet32_probe_vlbus.
|
|
*/
|
|
static int __devinit
|
|
pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
|
|
{
|
|
struct pcnet32_private *lp;
|
|
dma_addr_t lp_dma_addr;
|
|
int i, media;
|
|
int fdx, mii, fset, dxsuflo;
|
|
int chip_version;
|
|
char *chipname;
|
|
struct net_device *dev;
|
|
struct pcnet32_access *a = NULL;
|
|
u8 promaddr[6];
|
|
int ret = -ENODEV;
|
|
|
|
/* reset the chip */
|
|
pcnet32_wio_reset(ioaddr);
|
|
|
|
/* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */
|
|
if (pcnet32_wio_read_csr(ioaddr, 0) == 4 && pcnet32_wio_check(ioaddr)) {
|
|
a = &pcnet32_wio;
|
|
} else {
|
|
pcnet32_dwio_reset(ioaddr);
|
|
if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 && pcnet32_dwio_check(ioaddr)) {
|
|
a = &pcnet32_dwio;
|
|
} else
|
|
goto err_release_region;
|
|
}
|
|
|
|
chip_version = a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr,89) << 16);
|
|
if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW))
|
|
printk(KERN_INFO " PCnet chip version is %#x.\n", chip_version);
|
|
if ((chip_version & 0xfff) != 0x003) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_INFO PFX "Unsupported chip version.\n");
|
|
goto err_release_region;
|
|
}
|
|
|
|
/* initialize variables */
|
|
fdx = mii = fset = dxsuflo = 0;
|
|
chip_version = (chip_version >> 12) & 0xffff;
|
|
|
|
switch (chip_version) {
|
|
case 0x2420:
|
|
chipname = "PCnet/PCI 79C970"; /* PCI */
|
|
break;
|
|
case 0x2430:
|
|
if (shared)
|
|
chipname = "PCnet/PCI 79C970"; /* 970 gives the wrong chip id back */
|
|
else
|
|
chipname = "PCnet/32 79C965"; /* 486/VL bus */
|
|
break;
|
|
case 0x2621:
|
|
chipname = "PCnet/PCI II 79C970A"; /* PCI */
|
|
fdx = 1;
|
|
break;
|
|
case 0x2623:
|
|
chipname = "PCnet/FAST 79C971"; /* PCI */
|
|
fdx = 1; mii = 1; fset = 1;
|
|
break;
|
|
case 0x2624:
|
|
chipname = "PCnet/FAST+ 79C972"; /* PCI */
|
|
fdx = 1; mii = 1; fset = 1;
|
|
break;
|
|
case 0x2625:
|
|
chipname = "PCnet/FAST III 79C973"; /* PCI */
|
|
fdx = 1; mii = 1;
|
|
break;
|
|
case 0x2626:
|
|
chipname = "PCnet/Home 79C978"; /* PCI */
|
|
fdx = 1;
|
|
/*
|
|
* This is based on specs published at www.amd.com. This section
|
|
* assumes that a card with a 79C978 wants to go into standard
|
|
* ethernet mode. The 79C978 can also go into 1Mb HomePNA mode,
|
|
* and the module option homepna=1 can select this instead.
|
|
*/
|
|
media = a->read_bcr(ioaddr, 49);
|
|
media &= ~3; /* default to 10Mb ethernet */
|
|
if (cards_found < MAX_UNITS && homepna[cards_found])
|
|
media |= 1; /* switch to home wiring mode */
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_DEBUG PFX "media set to %sMbit mode.\n",
|
|
(media & 1) ? "1" : "10");
|
|
a->write_bcr(ioaddr, 49, media);
|
|
break;
|
|
case 0x2627:
|
|
chipname = "PCnet/FAST III 79C975"; /* PCI */
|
|
fdx = 1; mii = 1;
|
|
break;
|
|
case 0x2628:
|
|
chipname = "PCnet/PRO 79C976";
|
|
fdx = 1; mii = 1;
|
|
break;
|
|
default:
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_INFO PFX "PCnet version %#x, no PCnet32 chip.\n",
|
|
chip_version);
|
|
goto err_release_region;
|
|
}
|
|
|
|
/*
|
|
* On selected chips turn on the BCR18:NOUFLO bit. This stops transmit
|
|
* starting until the packet is loaded. Strike one for reliability, lose
|
|
* one for latency - although on PCI this isnt a big loss. Older chips
|
|
* have FIFO's smaller than a packet, so you can't do this.
|
|
* Turn on BCR18:BurstRdEn and BCR18:BurstWrEn.
|
|
*/
|
|
|
|
if (fset) {
|
|
a->write_bcr(ioaddr, 18, (a->read_bcr(ioaddr, 18) | 0x0860));
|
|
a->write_csr(ioaddr, 80, (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00);
|
|
dxsuflo = 1;
|
|
}
|
|
|
|
dev = alloc_etherdev(0);
|
|
if (!dev) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "Memory allocation failed.\n");
|
|
ret = -ENOMEM;
|
|
goto err_release_region;
|
|
}
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
|
|
|
|
/* In most chips, after a chip reset, the ethernet address is read from the
|
|
* station address PROM at the base address and programmed into the
|
|
* "Physical Address Registers" CSR12-14.
|
|
* As a precautionary measure, we read the PROM values and complain if
|
|
* they disagree with the CSRs. Either way, we use the CSR values, and
|
|
* double check that they are valid.
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int val;
|
|
val = a->read_csr(ioaddr, i+12) & 0x0ffff;
|
|
/* There may be endianness issues here. */
|
|
dev->dev_addr[2*i] = val & 0x0ff;
|
|
dev->dev_addr[2*i+1] = (val >> 8) & 0x0ff;
|
|
}
|
|
|
|
/* read PROM address and compare with CSR address */
|
|
for (i = 0; i < 6; i++)
|
|
promaddr[i] = inb(ioaddr + i);
|
|
|
|
if (memcmp(promaddr, dev->dev_addr, 6)
|
|
|| !is_valid_ether_addr(dev->dev_addr)) {
|
|
#ifndef __powerpc__
|
|
if (is_valid_ether_addr(promaddr)) {
|
|
#else
|
|
if (!is_valid_ether_addr(dev->dev_addr)
|
|
&& is_valid_ether_addr(promaddr)) {
|
|
#endif
|
|
if (pcnet32_debug & NETIF_MSG_PROBE) {
|
|
printk(" warning: CSR address invalid,\n");
|
|
printk(KERN_INFO " using instead PROM address of");
|
|
}
|
|
memcpy(dev->dev_addr, promaddr, 6);
|
|
}
|
|
}
|
|
|
|
/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */
|
|
if (!is_valid_ether_addr(dev->dev_addr))
|
|
memset(dev->dev_addr, 0, sizeof(dev->dev_addr));
|
|
|
|
if (pcnet32_debug & NETIF_MSG_PROBE) {
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2x", dev->dev_addr[i]);
|
|
|
|
/* Version 0x2623 and 0x2624 */
|
|
if (((chip_version + 1) & 0xfffe) == 0x2624) {
|
|
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
|
|
printk("\n" KERN_INFO " tx_start_pt(0x%04x):",i);
|
|
switch(i>>10) {
|
|
case 0: printk(" 20 bytes,"); break;
|
|
case 1: printk(" 64 bytes,"); break;
|
|
case 2: printk(" 128 bytes,"); break;
|
|
case 3: printk("~220 bytes,"); break;
|
|
}
|
|
i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */
|
|
printk(" BCR18(%x):",i&0xffff);
|
|
if (i & (1<<5)) printk("BurstWrEn ");
|
|
if (i & (1<<6)) printk("BurstRdEn ");
|
|
if (i & (1<<7)) printk("DWordIO ");
|
|
if (i & (1<<11)) printk("NoUFlow ");
|
|
i = a->read_bcr(ioaddr, 25);
|
|
printk("\n" KERN_INFO " SRAMSIZE=0x%04x,",i<<8);
|
|
i = a->read_bcr(ioaddr, 26);
|
|
printk(" SRAM_BND=0x%04x,",i<<8);
|
|
i = a->read_bcr(ioaddr, 27);
|
|
if (i & (1<<14)) printk("LowLatRx");
|
|
}
|
|
}
|
|
|
|
dev->base_addr = ioaddr;
|
|
/* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */
|
|
if ((lp = pci_alloc_consistent(pdev, sizeof(*lp), &lp_dma_addr)) == NULL) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
|
|
ret = -ENOMEM;
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
memset(lp, 0, sizeof(*lp));
|
|
lp->dma_addr = lp_dma_addr;
|
|
lp->pci_dev = pdev;
|
|
|
|
spin_lock_init(&lp->lock);
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
dev->priv = lp;
|
|
lp->name = chipname;
|
|
lp->shared_irq = shared;
|
|
lp->mii_if.full_duplex = fdx;
|
|
lp->mii_if.phy_id_mask = 0x1f;
|
|
lp->mii_if.reg_num_mask = 0x1f;
|
|
lp->dxsuflo = dxsuflo;
|
|
lp->mii = mii;
|
|
lp->msg_enable = pcnet32_debug;
|
|
if ((cards_found >= MAX_UNITS) || (options[cards_found] > sizeof(options_mapping)))
|
|
lp->options = PCNET32_PORT_ASEL;
|
|
else
|
|
lp->options = options_mapping[options[cards_found]];
|
|
lp->mii_if.dev = dev;
|
|
lp->mii_if.mdio_read = mdio_read;
|
|
lp->mii_if.mdio_write = mdio_write;
|
|
|
|
if (fdx && !(lp->options & PCNET32_PORT_ASEL) &&
|
|
((cards_found>=MAX_UNITS) || full_duplex[cards_found]))
|
|
lp->options |= PCNET32_PORT_FD;
|
|
|
|
if (!a) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_ERR PFX "No access methods\n");
|
|
ret = -ENODEV;
|
|
goto err_free_consistent;
|
|
}
|
|
lp->a = *a;
|
|
|
|
/* detect special T1/E1 WAN card by checking for MAC address */
|
|
if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0
|
|
&& dev->dev_addr[2] == 0x75)
|
|
lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
|
|
|
|
lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */
|
|
lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
|
|
for (i = 0; i < 6; i++)
|
|
lp->init_block.phys_addr[i] = dev->dev_addr[i];
|
|
lp->init_block.filter[0] = 0x00000000;
|
|
lp->init_block.filter[1] = 0x00000000;
|
|
lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
|
|
offsetof(struct pcnet32_private, rx_ring));
|
|
lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
|
|
offsetof(struct pcnet32_private, tx_ring));
|
|
|
|
/* switch pcnet32 to 32bit mode */
|
|
a->write_bcr(ioaddr, 20, 2);
|
|
|
|
a->write_csr(ioaddr, 1, (lp->dma_addr + offsetof(struct pcnet32_private,
|
|
init_block)) & 0xffff);
|
|
a->write_csr(ioaddr, 2, (lp->dma_addr + offsetof(struct pcnet32_private,
|
|
init_block)) >> 16);
|
|
|
|
if (pdev) { /* use the IRQ provided by PCI */
|
|
dev->irq = pdev->irq;
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(" assigned IRQ %d.\n", dev->irq);
|
|
} else {
|
|
unsigned long irq_mask = probe_irq_on();
|
|
|
|
/*
|
|
* To auto-IRQ we enable the initialization-done and DMA error
|
|
* interrupts. For ISA boards we get a DMA error, but VLB and PCI
|
|
* boards will work.
|
|
*/
|
|
/* Trigger an initialization just for the interrupt. */
|
|
a->write_csr (ioaddr, 0, 0x41);
|
|
mdelay (1);
|
|
|
|
dev->irq = probe_irq_off (irq_mask);
|
|
if (!dev->irq) {
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(", failed to detect IRQ line.\n");
|
|
ret = -ENODEV;
|
|
goto err_free_consistent;
|
|
}
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(", probed IRQ %d.\n", dev->irq);
|
|
}
|
|
|
|
/* Set the mii phy_id so that we can query the link state */
|
|
if (lp->mii)
|
|
lp->mii_if.phy_id = ((lp->a.read_bcr (ioaddr, 33)) >> 5) & 0x1f;
|
|
|
|
init_timer (&lp->watchdog_timer);
|
|
lp->watchdog_timer.data = (unsigned long) dev;
|
|
lp->watchdog_timer.function = (void *) &pcnet32_watchdog;
|
|
|
|
/* The PCNET32-specific entries in the device structure. */
|
|
dev->open = &pcnet32_open;
|
|
dev->hard_start_xmit = &pcnet32_start_xmit;
|
|
dev->stop = &pcnet32_close;
|
|
dev->get_stats = &pcnet32_get_stats;
|
|
dev->set_multicast_list = &pcnet32_set_multicast_list;
|
|
dev->do_ioctl = &pcnet32_ioctl;
|
|
dev->ethtool_ops = &pcnet32_ethtool_ops;
|
|
dev->tx_timeout = pcnet32_tx_timeout;
|
|
dev->watchdog_timeo = (5*HZ);
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = pcnet32_poll_controller;
|
|
#endif
|
|
|
|
/* Fill in the generic fields of the device structure. */
|
|
if (register_netdev(dev))
|
|
goto err_free_consistent;
|
|
|
|
if (pdev) {
|
|
pci_set_drvdata(pdev, dev);
|
|
} else {
|
|
lp->next = pcnet32_dev;
|
|
pcnet32_dev = dev;
|
|
}
|
|
|
|
if (pcnet32_debug & NETIF_MSG_PROBE)
|
|
printk(KERN_INFO "%s: registered as %s\n", dev->name, lp->name);
|
|
cards_found++;
|
|
|
|
/* enable LED writes */
|
|
a->write_bcr(ioaddr, 2, a->read_bcr(ioaddr, 2) | 0x1000);
|
|
|
|
return 0;
|
|
|
|
err_free_consistent:
|
|
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
|
|
err_free_netdev:
|
|
free_netdev(dev);
|
|
err_release_region:
|
|
release_region(ioaddr, PCNET32_TOTAL_SIZE);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int
|
|
pcnet32_open(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
u16 val;
|
|
int i;
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
if (request_irq(dev->irq, &pcnet32_interrupt,
|
|
lp->shared_irq ? SA_SHIRQ : 0, dev->name, (void *)dev)) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
/* Check for a valid station address */
|
|
if (!is_valid_ether_addr(dev->dev_addr)) {
|
|
rc = -EINVAL;
|
|
goto err_free_irq;
|
|
}
|
|
|
|
/* Reset the PCNET32 */
|
|
lp->a.reset (ioaddr);
|
|
|
|
/* switch pcnet32 to 32bit mode */
|
|
lp->a.write_bcr (ioaddr, 20, 2);
|
|
|
|
if (netif_msg_ifup(lp))
|
|
printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n",
|
|
dev->name, dev->irq,
|
|
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, tx_ring)),
|
|
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, rx_ring)),
|
|
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block)));
|
|
|
|
/* set/reset autoselect bit */
|
|
val = lp->a.read_bcr (ioaddr, 2) & ~2;
|
|
if (lp->options & PCNET32_PORT_ASEL)
|
|
val |= 2;
|
|
lp->a.write_bcr (ioaddr, 2, val);
|
|
|
|
/* handle full duplex setting */
|
|
if (lp->mii_if.full_duplex) {
|
|
val = lp->a.read_bcr (ioaddr, 9) & ~3;
|
|
if (lp->options & PCNET32_PORT_FD) {
|
|
val |= 1;
|
|
if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI))
|
|
val |= 2;
|
|
} else if (lp->options & PCNET32_PORT_ASEL) {
|
|
/* workaround of xSeries250, turn on for 79C975 only */
|
|
i = ((lp->a.read_csr(ioaddr, 88) |
|
|
(lp->a.read_csr(ioaddr,89) << 16)) >> 12) & 0xffff;
|
|
if (i == 0x2627)
|
|
val |= 3;
|
|
}
|
|
lp->a.write_bcr (ioaddr, 9, val);
|
|
}
|
|
|
|
/* set/reset GPSI bit in test register */
|
|
val = lp->a.read_csr (ioaddr, 124) & ~0x10;
|
|
if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI)
|
|
val |= 0x10;
|
|
lp->a.write_csr (ioaddr, 124, val);
|
|
|
|
/* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */
|
|
if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
|
|
(lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
|
|
lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
|
|
printk(KERN_DEBUG "%s: Skipping PHY selection.\n", dev->name);
|
|
} else {
|
|
/*
|
|
* 24 Jun 2004 according AMD, in order to change the PHY,
|
|
* DANAS (or DISPM for 79C976) must be set; then select the speed,
|
|
* duplex, and/or enable auto negotiation, and clear DANAS
|
|
*/
|
|
if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
|
|
lp->a.write_bcr(ioaddr, 32,
|
|
lp->a.read_bcr(ioaddr, 32) | 0x0080);
|
|
/* disable Auto Negotiation, set 10Mpbs, HD */
|
|
val = lp->a.read_bcr(ioaddr, 32) & ~0xb8;
|
|
if (lp->options & PCNET32_PORT_FD)
|
|
val |= 0x10;
|
|
if (lp->options & PCNET32_PORT_100)
|
|
val |= 0x08;
|
|
lp->a.write_bcr (ioaddr, 32, val);
|
|
} else {
|
|
if (lp->options & PCNET32_PORT_ASEL) {
|
|
lp->a.write_bcr(ioaddr, 32,
|
|
lp->a.read_bcr(ioaddr, 32) | 0x0080);
|
|
/* enable auto negotiate, setup, disable fd */
|
|
val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
|
|
val |= 0x20;
|
|
lp->a.write_bcr(ioaddr, 32, val);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef DO_DXSUFLO
|
|
if (lp->dxsuflo) { /* Disable transmit stop on underflow */
|
|
val = lp->a.read_csr (ioaddr, 3);
|
|
val |= 0x40;
|
|
lp->a.write_csr (ioaddr, 3, val);
|
|
}
|
|
#endif
|
|
|
|
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
|
|
pcnet32_load_multicast(dev);
|
|
|
|
if (pcnet32_init_ring(dev)) {
|
|
rc = -ENOMEM;
|
|
goto err_free_ring;
|
|
}
|
|
|
|
/* Re-initialize the PCNET32, and start it when done. */
|
|
lp->a.write_csr (ioaddr, 1, (lp->dma_addr +
|
|
offsetof(struct pcnet32_private, init_block)) & 0xffff);
|
|
lp->a.write_csr (ioaddr, 2, (lp->dma_addr +
|
|
offsetof(struct pcnet32_private, init_block)) >> 16);
|
|
|
|
lp->a.write_csr (ioaddr, 4, 0x0915);
|
|
lp->a.write_csr (ioaddr, 0, 0x0001);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
/* If we have mii, print the link status and start the watchdog */
|
|
if (lp->mii) {
|
|
mii_check_media (&lp->mii_if, netif_msg_link(lp), 1);
|
|
mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
|
|
}
|
|
|
|
i = 0;
|
|
while (i++ < 100)
|
|
if (lp->a.read_csr (ioaddr, 0) & 0x0100)
|
|
break;
|
|
/*
|
|
* We used to clear the InitDone bit, 0x0100, here but Mark Stockton
|
|
* reports that doing so triggers a bug in the '974.
|
|
*/
|
|
lp->a.write_csr (ioaddr, 0, 0x0042);
|
|
|
|
if (netif_msg_ifup(lp))
|
|
printk(KERN_DEBUG "%s: pcnet32 open after %d ticks, init block %#x csr0 %4.4x.\n",
|
|
dev->name, i, (u32) (lp->dma_addr +
|
|
offsetof(struct pcnet32_private, init_block)),
|
|
lp->a.read_csr(ioaddr, 0));
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return 0; /* Always succeed */
|
|
|
|
err_free_ring:
|
|
/* free any allocated skbuffs */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_ring[i].status = 0;
|
|
if (lp->rx_skbuff[i]) {
|
|
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
}
|
|
lp->rx_skbuff[i] = NULL;
|
|
lp->rx_dma_addr[i] = 0;
|
|
}
|
|
/*
|
|
* Switch back to 16bit mode to avoid problems with dumb
|
|
* DOS packet driver after a warm reboot
|
|
*/
|
|
lp->a.write_bcr (ioaddr, 20, 4);
|
|
|
|
err_free_irq:
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
free_irq(dev->irq, dev);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* The LANCE has been halted for one reason or another (busmaster memory
|
|
* arbitration error, Tx FIFO underflow, driver stopped it to reconfigure,
|
|
* etc.). Modern LANCE variants always reload their ring-buffer
|
|
* configuration when restarted, so we must reinitialize our ring
|
|
* context before restarting. As part of this reinitialization,
|
|
* find all packets still on the Tx ring and pretend that they had been
|
|
* sent (in effect, drop the packets on the floor) - the higher-level
|
|
* protocols will time out and retransmit. It'd be better to shuffle
|
|
* these skbs to a temp list and then actually re-Tx them after
|
|
* restarting the chip, but I'm too lazy to do so right now. dplatt@3do.com
|
|
*/
|
|
|
|
static void
|
|
pcnet32_purge_tx_ring(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int i;
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_ring[i].status = 0; /* CPU owns buffer */
|
|
wmb(); /* Make sure adapter sees owner change */
|
|
if (lp->tx_skbuff[i]) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i],
|
|
lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_any(lp->tx_skbuff[i]);
|
|
}
|
|
lp->tx_skbuff[i] = NULL;
|
|
lp->tx_dma_addr[i] = 0;
|
|
}
|
|
}
|
|
|
|
|
|
/* Initialize the PCNET32 Rx and Tx rings. */
|
|
static int
|
|
pcnet32_init_ring(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int i;
|
|
|
|
lp->tx_full = 0;
|
|
lp->cur_rx = lp->cur_tx = 0;
|
|
lp->dirty_rx = lp->dirty_tx = 0;
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *rx_skbuff = lp->rx_skbuff[i];
|
|
if (rx_skbuff == NULL) {
|
|
if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) {
|
|
/* there is not much, we can do at this point */
|
|
if (pcnet32_debug & NETIF_MSG_DRV)
|
|
printk(KERN_ERR "%s: pcnet32_init_ring dev_alloc_skb failed.\n",
|
|
dev->name);
|
|
return -1;
|
|
}
|
|
skb_reserve (rx_skbuff, 2);
|
|
}
|
|
|
|
rmb();
|
|
if (lp->rx_dma_addr[i] == 0)
|
|
lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, rx_skbuff->tail,
|
|
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
|
|
lp->rx_ring[i].base = (u32)le32_to_cpu(lp->rx_dma_addr[i]);
|
|
lp->rx_ring[i].buf_length = le16_to_cpu(2-PKT_BUF_SZ);
|
|
wmb(); /* Make sure owner changes after all others are visible */
|
|
lp->rx_ring[i].status = le16_to_cpu(0x8000);
|
|
}
|
|
/* The Tx buffer address is filled in as needed, but we do need to clear
|
|
* the upper ownership bit. */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_ring[i].status = 0; /* CPU owns buffer */
|
|
wmb(); /* Make sure adapter sees owner change */
|
|
lp->tx_ring[i].base = 0;
|
|
lp->tx_dma_addr[i] = 0;
|
|
}
|
|
|
|
lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
|
|
for (i = 0; i < 6; i++)
|
|
lp->init_block.phys_addr[i] = dev->dev_addr[i];
|
|
lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
|
|
offsetof(struct pcnet32_private, rx_ring));
|
|
lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
|
|
offsetof(struct pcnet32_private, tx_ring));
|
|
wmb(); /* Make sure all changes are visible */
|
|
return 0;
|
|
}
|
|
|
|
/* the pcnet32 has been issued a stop or reset. Wait for the stop bit
|
|
* then flush the pending transmit operations, re-initialize the ring,
|
|
* and tell the chip to initialize.
|
|
*/
|
|
static void
|
|
pcnet32_restart(struct net_device *dev, unsigned int csr0_bits)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
int i;
|
|
|
|
/* wait for stop */
|
|
for (i=0; i<100; i++)
|
|
if (lp->a.read_csr(ioaddr, 0) & 0x0004)
|
|
break;
|
|
|
|
if (i >= 100 && netif_msg_drv(lp))
|
|
printk(KERN_ERR "%s: pcnet32_restart timed out waiting for stop.\n",
|
|
dev->name);
|
|
|
|
pcnet32_purge_tx_ring(dev);
|
|
if (pcnet32_init_ring(dev))
|
|
return;
|
|
|
|
/* ReInit Ring */
|
|
lp->a.write_csr (ioaddr, 0, 1);
|
|
i = 0;
|
|
while (i++ < 1000)
|
|
if (lp->a.read_csr (ioaddr, 0) & 0x0100)
|
|
break;
|
|
|
|
lp->a.write_csr (ioaddr, 0, csr0_bits);
|
|
}
|
|
|
|
|
|
static void
|
|
pcnet32_tx_timeout (struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr, flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
/* Transmitter timeout, serious problems. */
|
|
if (pcnet32_debug & NETIF_MSG_DRV)
|
|
printk(KERN_ERR "%s: transmit timed out, status %4.4x, resetting.\n",
|
|
dev->name, lp->a.read_csr(ioaddr, 0));
|
|
lp->a.write_csr (ioaddr, 0, 0x0004);
|
|
lp->stats.tx_errors++;
|
|
if (netif_msg_tx_err(lp)) {
|
|
int i;
|
|
printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.",
|
|
lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "",
|
|
lp->cur_rx);
|
|
for (i = 0 ; i < RX_RING_SIZE; i++)
|
|
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
|
|
le32_to_cpu(lp->rx_ring[i].base),
|
|
(-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff,
|
|
le32_to_cpu(lp->rx_ring[i].msg_length),
|
|
le16_to_cpu(lp->rx_ring[i].status));
|
|
for (i = 0 ; i < TX_RING_SIZE; i++)
|
|
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
|
|
le32_to_cpu(lp->tx_ring[i].base),
|
|
(-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff,
|
|
le32_to_cpu(lp->tx_ring[i].misc),
|
|
le16_to_cpu(lp->tx_ring[i].status));
|
|
printk("\n");
|
|
}
|
|
pcnet32_restart(dev, 0x0042);
|
|
|
|
dev->trans_start = jiffies;
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
|
|
static int
|
|
pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
u16 status;
|
|
int entry;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
if (netif_msg_tx_queued(lp)) {
|
|
printk(KERN_DEBUG "%s: pcnet32_start_xmit() called, csr0 %4.4x.\n",
|
|
dev->name, lp->a.read_csr(ioaddr, 0));
|
|
}
|
|
|
|
/* Default status -- will not enable Successful-TxDone
|
|
* interrupt when that option is available to us.
|
|
*/
|
|
status = 0x8300;
|
|
|
|
/* Fill in a Tx ring entry */
|
|
|
|
/* Mask to ring buffer boundary. */
|
|
entry = lp->cur_tx & TX_RING_MOD_MASK;
|
|
|
|
/* Caution: the write order is important here, set the status
|
|
* with the "ownership" bits last. */
|
|
|
|
lp->tx_ring[entry].length = le16_to_cpu(-skb->len);
|
|
|
|
lp->tx_ring[entry].misc = 0x00000000;
|
|
|
|
lp->tx_skbuff[entry] = skb;
|
|
lp->tx_dma_addr[entry] = pci_map_single(lp->pci_dev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
lp->tx_ring[entry].base = (u32)le32_to_cpu(lp->tx_dma_addr[entry]);
|
|
wmb(); /* Make sure owner changes after all others are visible */
|
|
lp->tx_ring[entry].status = le16_to_cpu(status);
|
|
|
|
lp->cur_tx++;
|
|
lp->stats.tx_bytes += skb->len;
|
|
|
|
/* Trigger an immediate send poll. */
|
|
lp->a.write_csr (ioaddr, 0, 0x0048);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base != 0) {
|
|
lp->tx_full = 1;
|
|
netif_stop_queue(dev);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* The PCNET32 interrupt handler. */
|
|
static irqreturn_t
|
|
pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct pcnet32_private *lp;
|
|
unsigned long ioaddr;
|
|
u16 csr0,rap;
|
|
int boguscnt = max_interrupt_work;
|
|
int must_restart;
|
|
|
|
if (!dev) {
|
|
if (pcnet32_debug & NETIF_MSG_INTR)
|
|
printk (KERN_DEBUG "%s(): irq %d for unknown device\n",
|
|
__FUNCTION__, irq);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ioaddr = dev->base_addr;
|
|
lp = dev->priv;
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
rap = lp->a.read_rap(ioaddr);
|
|
while ((csr0 = lp->a.read_csr (ioaddr, 0)) & 0x8f00 && --boguscnt >= 0) {
|
|
if (csr0 == 0xffff) {
|
|
break; /* PCMCIA remove happened */
|
|
}
|
|
/* Acknowledge all of the current interrupt sources ASAP. */
|
|
lp->a.write_csr (ioaddr, 0, csr0 & ~0x004f);
|
|
|
|
must_restart = 0;
|
|
|
|
if (netif_msg_intr(lp))
|
|
printk(KERN_DEBUG "%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n",
|
|
dev->name, csr0, lp->a.read_csr (ioaddr, 0));
|
|
|
|
if (csr0 & 0x0400) /* Rx interrupt */
|
|
pcnet32_rx(dev);
|
|
|
|
if (csr0 & 0x0200) { /* Tx-done interrupt */
|
|
unsigned int dirty_tx = lp->dirty_tx;
|
|
int delta;
|
|
|
|
while (dirty_tx != lp->cur_tx) {
|
|
int entry = dirty_tx & TX_RING_MOD_MASK;
|
|
int status = (short)le16_to_cpu(lp->tx_ring[entry].status);
|
|
|
|
if (status < 0)
|
|
break; /* It still hasn't been Txed */
|
|
|
|
lp->tx_ring[entry].base = 0;
|
|
|
|
if (status & 0x4000) {
|
|
/* There was an major error, log it. */
|
|
int err_status = le32_to_cpu(lp->tx_ring[entry].misc);
|
|
lp->stats.tx_errors++;
|
|
if (netif_msg_tx_err(lp))
|
|
printk(KERN_ERR "%s: Tx error status=%04x err_status=%08x\n",
|
|
dev->name, status, err_status);
|
|
if (err_status & 0x04000000) lp->stats.tx_aborted_errors++;
|
|
if (err_status & 0x08000000) lp->stats.tx_carrier_errors++;
|
|
if (err_status & 0x10000000) lp->stats.tx_window_errors++;
|
|
#ifndef DO_DXSUFLO
|
|
if (err_status & 0x40000000) {
|
|
lp->stats.tx_fifo_errors++;
|
|
/* Ackk! On FIFO errors the Tx unit is turned off! */
|
|
/* Remove this verbosity later! */
|
|
if (netif_msg_tx_err(lp))
|
|
printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n",
|
|
dev->name, csr0);
|
|
must_restart = 1;
|
|
}
|
|
#else
|
|
if (err_status & 0x40000000) {
|
|
lp->stats.tx_fifo_errors++;
|
|
if (! lp->dxsuflo) { /* If controller doesn't recover ... */
|
|
/* Ackk! On FIFO errors the Tx unit is turned off! */
|
|
/* Remove this verbosity later! */
|
|
if (netif_msg_tx_err(lp))
|
|
printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n",
|
|
dev->name, csr0);
|
|
must_restart = 1;
|
|
}
|
|
}
|
|
#endif
|
|
} else {
|
|
if (status & 0x1800)
|
|
lp->stats.collisions++;
|
|
lp->stats.tx_packets++;
|
|
}
|
|
|
|
/* We must free the original skb */
|
|
if (lp->tx_skbuff[entry]) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[entry],
|
|
lp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(lp->tx_skbuff[entry]);
|
|
lp->tx_skbuff[entry] = NULL;
|
|
lp->tx_dma_addr[entry] = 0;
|
|
}
|
|
dirty_tx++;
|
|
}
|
|
|
|
delta = (lp->cur_tx - dirty_tx) & (TX_RING_MOD_MASK + TX_RING_SIZE);
|
|
if (delta > TX_RING_SIZE) {
|
|
if (netif_msg_drv(lp))
|
|
printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
|
|
dev->name, dirty_tx, lp->cur_tx, lp->tx_full);
|
|
dirty_tx += TX_RING_SIZE;
|
|
delta -= TX_RING_SIZE;
|
|
}
|
|
|
|
if (lp->tx_full &&
|
|
netif_queue_stopped(dev) &&
|
|
delta < TX_RING_SIZE - 2) {
|
|
/* The ring is no longer full, clear tbusy. */
|
|
lp->tx_full = 0;
|
|
netif_wake_queue (dev);
|
|
}
|
|
lp->dirty_tx = dirty_tx;
|
|
}
|
|
|
|
/* Log misc errors. */
|
|
if (csr0 & 0x4000) lp->stats.tx_errors++; /* Tx babble. */
|
|
if (csr0 & 0x1000) {
|
|
/*
|
|
* this happens when our receive ring is full. This shouldn't
|
|
* be a problem as we will see normal rx interrupts for the frames
|
|
* in the receive ring. But there are some PCI chipsets (I can
|
|
* reproduce this on SP3G with Intel saturn chipset) which have
|
|
* sometimes problems and will fill up the receive ring with
|
|
* error descriptors. In this situation we don't get a rx
|
|
* interrupt, but a missed frame interrupt sooner or later.
|
|
* So we try to clean up our receive ring here.
|
|
*/
|
|
pcnet32_rx(dev);
|
|
lp->stats.rx_errors++; /* Missed a Rx frame. */
|
|
}
|
|
if (csr0 & 0x0800) {
|
|
if (netif_msg_drv(lp))
|
|
printk(KERN_ERR "%s: Bus master arbitration failure, status %4.4x.\n",
|
|
dev->name, csr0);
|
|
/* unlike for the lance, there is no restart needed */
|
|
}
|
|
|
|
if (must_restart) {
|
|
/* reset the chip to clear the error condition, then restart */
|
|
lp->a.reset(ioaddr);
|
|
lp->a.write_csr(ioaddr, 4, 0x0915);
|
|
pcnet32_restart(dev, 0x0002);
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
|
|
/* Set interrupt enable. */
|
|
lp->a.write_csr (ioaddr, 0, 0x0040);
|
|
lp->a.write_rap (ioaddr,rap);
|
|
|
|
if (netif_msg_intr(lp))
|
|
printk(KERN_DEBUG "%s: exiting interrupt, csr0=%#4.4x.\n",
|
|
dev->name, lp->a.read_csr (ioaddr, 0));
|
|
|
|
spin_unlock(&lp->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int
|
|
pcnet32_rx(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int entry = lp->cur_rx & RX_RING_MOD_MASK;
|
|
int boguscnt = RX_RING_SIZE / 2;
|
|
|
|
/* If we own the next entry, it's a new packet. Send it up. */
|
|
while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) {
|
|
int status = (short)le16_to_cpu(lp->rx_ring[entry].status) >> 8;
|
|
|
|
if (status != 0x03) { /* There was an error. */
|
|
/*
|
|
* There is a tricky error noted by John Murphy,
|
|
* <murf@perftech.com> to Russ Nelson: Even with full-sized
|
|
* buffers it's possible for a jabber packet to use two
|
|
* buffers, with only the last correctly noting the error.
|
|
*/
|
|
if (status & 0x01) /* Only count a general error at the */
|
|
lp->stats.rx_errors++; /* end of a packet.*/
|
|
if (status & 0x20) lp->stats.rx_frame_errors++;
|
|
if (status & 0x10) lp->stats.rx_over_errors++;
|
|
if (status & 0x08) lp->stats.rx_crc_errors++;
|
|
if (status & 0x04) lp->stats.rx_fifo_errors++;
|
|
lp->rx_ring[entry].status &= le16_to_cpu(0x03ff);
|
|
} else {
|
|
/* Malloc up new buffer, compatible with net-2e. */
|
|
short pkt_len = (le32_to_cpu(lp->rx_ring[entry].msg_length) & 0xfff)-4;
|
|
struct sk_buff *skb;
|
|
|
|
/* Discard oversize frames. */
|
|
if (unlikely(pkt_len > PKT_BUF_SZ - 2)) {
|
|
if (netif_msg_drv(lp))
|
|
printk(KERN_ERR "%s: Impossible packet size %d!\n",
|
|
dev->name, pkt_len);
|
|
lp->stats.rx_errors++;
|
|
} else if (pkt_len < 60) {
|
|
if (netif_msg_rx_err(lp))
|
|
printk(KERN_ERR "%s: Runt packet!\n", dev->name);
|
|
lp->stats.rx_errors++;
|
|
} else {
|
|
int rx_in_place = 0;
|
|
|
|
if (pkt_len > rx_copybreak) {
|
|
struct sk_buff *newskb;
|
|
|
|
if ((newskb = dev_alloc_skb(PKT_BUF_SZ))) {
|
|
skb_reserve (newskb, 2);
|
|
skb = lp->rx_skbuff[entry];
|
|
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[entry],
|
|
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
|
|
skb_put (skb, pkt_len);
|
|
lp->rx_skbuff[entry] = newskb;
|
|
newskb->dev = dev;
|
|
lp->rx_dma_addr[entry] =
|
|
pci_map_single(lp->pci_dev, newskb->tail,
|
|
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
|
|
lp->rx_ring[entry].base = le32_to_cpu(lp->rx_dma_addr[entry]);
|
|
rx_in_place = 1;
|
|
} else
|
|
skb = NULL;
|
|
} else {
|
|
skb = dev_alloc_skb(pkt_len+2);
|
|
}
|
|
|
|
if (skb == NULL) {
|
|
int i;
|
|
if (netif_msg_drv(lp))
|
|
printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n",
|
|
dev->name);
|
|
for (i = 0; i < RX_RING_SIZE; i++)
|
|
if ((short)le16_to_cpu(lp->rx_ring[(entry+i)
|
|
& RX_RING_MOD_MASK].status) < 0)
|
|
break;
|
|
|
|
if (i > RX_RING_SIZE -2) {
|
|
lp->stats.rx_dropped++;
|
|
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
|
|
wmb(); /* Make sure adapter sees owner change */
|
|
lp->cur_rx++;
|
|
}
|
|
break;
|
|
}
|
|
skb->dev = dev;
|
|
if (!rx_in_place) {
|
|
skb_reserve(skb,2); /* 16 byte align */
|
|
skb_put(skb,pkt_len); /* Make room */
|
|
pci_dma_sync_single_for_cpu(lp->pci_dev,
|
|
lp->rx_dma_addr[entry],
|
|
PKT_BUF_SZ-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
eth_copy_and_sum(skb,
|
|
(unsigned char *)(lp->rx_skbuff[entry]->tail),
|
|
pkt_len,0);
|
|
pci_dma_sync_single_for_device(lp->pci_dev,
|
|
lp->rx_dma_addr[entry],
|
|
PKT_BUF_SZ-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
lp->stats.rx_bytes += skb->len;
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
}
|
|
}
|
|
/*
|
|
* The docs say that the buffer length isn't touched, but Andrew Boyd
|
|
* of QNX reports that some revs of the 79C965 clear it.
|
|
*/
|
|
lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ);
|
|
wmb(); /* Make sure owner changes after all others are visible */
|
|
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
|
|
entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
|
|
if (--boguscnt <= 0) break; /* don't stay in loop forever */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
pcnet32_close(struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr = dev->base_addr;
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
del_timer_sync(&lp->watchdog_timer);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112);
|
|
|
|
if (netif_msg_ifdown(lp))
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
|
|
dev->name, lp->a.read_csr (ioaddr, 0));
|
|
|
|
/* We stop the PCNET32 here -- it occasionally polls memory if we don't. */
|
|
lp->a.write_csr (ioaddr, 0, 0x0004);
|
|
|
|
/*
|
|
* Switch back to 16bit mode to avoid problems with dumb
|
|
* DOS packet driver after a warm reboot
|
|
*/
|
|
lp->a.write_bcr (ioaddr, 20, 4);
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
/* free all allocated skbuffs */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_ring[i].status = 0;
|
|
wmb(); /* Make sure adapter sees owner change */
|
|
if (lp->rx_skbuff[i]) {
|
|
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
}
|
|
lp->rx_skbuff[i] = NULL;
|
|
lp->rx_dma_addr[i] = 0;
|
|
}
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_ring[i].status = 0; /* CPU owns buffer */
|
|
wmb(); /* Make sure adapter sees owner change */
|
|
if (lp->tx_skbuff[i]) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i],
|
|
lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(lp->tx_skbuff[i]);
|
|
}
|
|
lp->tx_skbuff[i] = NULL;
|
|
lp->tx_dma_addr[i] = 0;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *
|
|
pcnet32_get_stats(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
u16 saved_addr;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
saved_addr = lp->a.read_rap(ioaddr);
|
|
lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112);
|
|
lp->a.write_rap(ioaddr, saved_addr);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
/* taken from the sunlance driver, which it took from the depca driver */
|
|
static void pcnet32_load_multicast (struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
volatile struct pcnet32_init_block *ib = &lp->init_block;
|
|
volatile u16 *mcast_table = (u16 *)&ib->filter;
|
|
struct dev_mc_list *dmi=dev->mc_list;
|
|
char *addrs;
|
|
int i;
|
|
u32 crc;
|
|
|
|
/* set all multicast bits */
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
ib->filter[0] = 0xffffffff;
|
|
ib->filter[1] = 0xffffffff;
|
|
return;
|
|
}
|
|
/* clear the multicast filter */
|
|
ib->filter[0] = 0;
|
|
ib->filter[1] = 0;
|
|
|
|
/* Add addresses */
|
|
for (i = 0; i < dev->mc_count; i++) {
|
|
addrs = dmi->dmi_addr;
|
|
dmi = dmi->next;
|
|
|
|
/* multicast address? */
|
|
if (!(*addrs & 1))
|
|
continue;
|
|
|
|
crc = ether_crc_le(6, addrs);
|
|
crc = crc >> 26;
|
|
mcast_table [crc >> 4] = le16_to_cpu(
|
|
le16_to_cpu(mcast_table [crc >> 4]) | (1 << (crc & 0xf)));
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* Set or clear the multicast filter for this adaptor.
|
|
*/
|
|
static void pcnet32_set_multicast_list(struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr = dev->base_addr, flags;
|
|
struct pcnet32_private *lp = dev->priv;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
if (dev->flags&IFF_PROMISC) {
|
|
/* Log any net taps. */
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
|
|
lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7);
|
|
} else {
|
|
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
|
|
pcnet32_load_multicast (dev);
|
|
}
|
|
|
|
lp->a.write_csr (ioaddr, 0, 0x0004); /* Temporarily stop the lance. */
|
|
pcnet32_restart(dev, 0x0042); /* Resume normal operation */
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
/* This routine assumes that the lp->lock is held */
|
|
static int mdio_read(struct net_device *dev, int phy_id, int reg_num)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
u16 val_out;
|
|
|
|
if (!lp->mii)
|
|
return 0;
|
|
|
|
lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
|
|
val_out = lp->a.read_bcr(ioaddr, 34);
|
|
|
|
return val_out;
|
|
}
|
|
|
|
/* This routine assumes that the lp->lock is held */
|
|
static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long ioaddr = dev->base_addr;
|
|
|
|
if (!lp->mii)
|
|
return;
|
|
|
|
lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
|
|
lp->a.write_bcr(ioaddr, 34, val);
|
|
}
|
|
|
|
static int pcnet32_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
/* SIOC[GS]MIIxxx ioctls */
|
|
if (lp->mii) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
rc = generic_mii_ioctl(&lp->mii_if, if_mii(rq), cmd, NULL);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
} else {
|
|
rc = -EOPNOTSUPP;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void pcnet32_watchdog(struct net_device *dev)
|
|
{
|
|
struct pcnet32_private *lp = dev->priv;
|
|
unsigned long flags;
|
|
|
|
/* Print the link status if it has changed */
|
|
if (lp->mii) {
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
mii_check_media (&lp->mii_if, netif_msg_link(lp), 0);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
|
|
}
|
|
|
|
static void __devexit pcnet32_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct pcnet32_private *lp = dev->priv;
|
|
|
|
unregister_netdev(dev);
|
|
release_region(dev->base_addr, PCNET32_TOTAL_SIZE);
|
|
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
|
|
free_netdev(dev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
static struct pci_driver pcnet32_driver = {
|
|
.name = DRV_NAME,
|
|
.probe = pcnet32_probe_pci,
|
|
.remove = __devexit_p(pcnet32_remove_one),
|
|
.id_table = pcnet32_pci_tbl,
|
|
};
|
|
|
|
/* An additional parameter that may be passed in... */
|
|
static int debug = -1;
|
|
static int tx_start_pt = -1;
|
|
static int pcnet32_have_pci;
|
|
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, DRV_NAME " debug level");
|
|
module_param(max_interrupt_work, int, 0);
|
|
MODULE_PARM_DESC(max_interrupt_work, DRV_NAME " maximum events handled per interrupt");
|
|
module_param(rx_copybreak, int, 0);
|
|
MODULE_PARM_DESC(rx_copybreak, DRV_NAME " copy breakpoint for copy-only-tiny-frames");
|
|
module_param(tx_start_pt, int, 0);
|
|
MODULE_PARM_DESC(tx_start_pt, DRV_NAME " transmit start point (0-3)");
|
|
module_param(pcnet32vlb, int, 0);
|
|
MODULE_PARM_DESC(pcnet32vlb, DRV_NAME " Vesa local bus (VLB) support (0/1)");
|
|
module_param_array(options, int, NULL, 0);
|
|
MODULE_PARM_DESC(options, DRV_NAME " initial option setting(s) (0-15)");
|
|
module_param_array(full_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(full_duplex, DRV_NAME " full duplex setting(s) (1)");
|
|
/* Module Parameter for HomePNA cards added by Patrick Simmons, 2004 */
|
|
module_param_array(homepna, int, NULL, 0);
|
|
MODULE_PARM_DESC(homepna, DRV_NAME " mode for 79C978 cards (1 for HomePNA, 0 for Ethernet, default Ethernet");
|
|
|
|
MODULE_AUTHOR("Thomas Bogendoerfer");
|
|
MODULE_DESCRIPTION("Driver for PCnet32 and PCnetPCI based ethercards");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
|
|
|
|
static int __init pcnet32_init_module(void)
|
|
{
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT);
|
|
|
|
if ((tx_start_pt >= 0) && (tx_start_pt <= 3))
|
|
tx_start = tx_start_pt;
|
|
|
|
/* find the PCI devices */
|
|
if (!pci_module_init(&pcnet32_driver))
|
|
pcnet32_have_pci = 1;
|
|
|
|
/* should we find any remaining VLbus devices ? */
|
|
if (pcnet32vlb)
|
|
pcnet32_probe_vlbus();
|
|
|
|
if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE))
|
|
printk(KERN_INFO PFX "%d cards_found.\n", cards_found);
|
|
|
|
return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static void __exit pcnet32_cleanup_module(void)
|
|
{
|
|
struct net_device *next_dev;
|
|
|
|
while (pcnet32_dev) {
|
|
struct pcnet32_private *lp = pcnet32_dev->priv;
|
|
next_dev = lp->next;
|
|
unregister_netdev(pcnet32_dev);
|
|
release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE);
|
|
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
|
|
free_netdev(pcnet32_dev);
|
|
pcnet32_dev = next_dev;
|
|
}
|
|
|
|
if (pcnet32_have_pci)
|
|
pci_unregister_driver(&pcnet32_driver);
|
|
}
|
|
|
|
module_init(pcnet32_init_module);
|
|
module_exit(pcnet32_cleanup_module);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-indent-level: 4
|
|
* tab-width: 8
|
|
* End:
|
|
*/
|