mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
43611afb6c
This adds the eMMC driver for the Sparx5 SoC. It is based upon the designware IP, but requires some extra initialization and quirks. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200825081357.32354-3-lars.povlsen@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
270 lines
7.4 KiB
C
270 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* drivers/mmc/host/sdhci-of-sparx5.c
|
|
*
|
|
* MCHP Sparx5 SoC Secure Digital Host Controller Interface.
|
|
*
|
|
* Copyright (c) 2019 Microchip Inc.
|
|
*
|
|
* Author: Lars Povlsen <lars.povlsen@microchip.com>
|
|
*/
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
|
|
#define CPU_REGS_GENERAL_CTRL (0x22 * 4)
|
|
#define MSHC_DLY_CC_MASK GENMASK(16, 13)
|
|
#define MSHC_DLY_CC_SHIFT 13
|
|
#define MSHC_DLY_CC_MAX 15
|
|
|
|
#define CPU_REGS_PROC_CTRL (0x2C * 4)
|
|
#define ACP_CACHE_FORCE_ENA BIT(4)
|
|
#define ACP_AWCACHE BIT(3)
|
|
#define ACP_ARCACHE BIT(2)
|
|
#define ACP_CACHE_MASK (ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
|
|
|
|
#define MSHC2_VERSION 0x500 /* Off 0x140, reg 0x0 */
|
|
#define MSHC2_TYPE 0x504 /* Off 0x140, reg 0x1 */
|
|
#define MSHC2_EMMC_CTRL 0x52c /* Off 0x140, reg 0xB */
|
|
#define MSHC2_EMMC_CTRL_EMMC_RST_N BIT(2)
|
|
#define MSHC2_EMMC_CTRL_IS_EMMC BIT(0)
|
|
|
|
struct sdhci_sparx5_data {
|
|
struct sdhci_host *host;
|
|
struct regmap *cpu_ctrl;
|
|
int delay_clock;
|
|
};
|
|
|
|
#define BOUNDARY_OK(addr, len) \
|
|
((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
|
|
|
|
/*
|
|
* If DMA addr spans 128MB boundary, we split the DMA transfer into two
|
|
* so that each DMA transfer doesn't exceed the boundary.
|
|
*/
|
|
static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
|
|
dma_addr_t addr, int len,
|
|
unsigned int cmd)
|
|
{
|
|
int tmplen, offset;
|
|
|
|
if (likely(!len || BOUNDARY_OK(addr, len))) {
|
|
sdhci_adma_write_desc(host, desc, addr, len, cmd);
|
|
return;
|
|
}
|
|
|
|
pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n",
|
|
mmc_hostname(host->mmc), len, addr);
|
|
|
|
offset = addr & (SZ_128M - 1);
|
|
tmplen = SZ_128M - offset;
|
|
sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
|
|
|
|
addr += tmplen;
|
|
len -= tmplen;
|
|
sdhci_adma_write_desc(host, desc, addr, len, cmd);
|
|
}
|
|
|
|
static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
|
|
|
|
/* Update ACP caching attributes in HW */
|
|
regmap_update_bits(sdhci_sparx5->cpu_ctrl,
|
|
CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
|
|
}
|
|
|
|
static void sparx5_set_delay(struct sdhci_host *host, u8 value)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
|
|
|
|
/* Update DLY_CC in HW */
|
|
regmap_update_bits(sdhci_sparx5->cpu_ctrl,
|
|
CPU_REGS_GENERAL_CTRL,
|
|
MSHC_DLY_CC_MASK,
|
|
(value << MSHC_DLY_CC_SHIFT));
|
|
}
|
|
|
|
static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
|
|
{
|
|
if (!mmc_card_is_removable(host->mmc)) {
|
|
u8 value;
|
|
|
|
value = sdhci_readb(host, MSHC2_EMMC_CTRL);
|
|
if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
|
|
value |= MSHC2_EMMC_CTRL_IS_EMMC;
|
|
pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
|
|
mmc_hostname(host->mmc), value);
|
|
sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
|
|
{
|
|
u8 value;
|
|
|
|
pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
|
|
value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
|
|
~MSHC2_EMMC_CTRL_EMMC_RST_N;
|
|
sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
|
|
/* For eMMC, minimum is 1us but give it 10us for good measure */
|
|
usleep_range(10, 20);
|
|
sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
|
|
MSHC2_EMMC_CTRL);
|
|
/* For eMMC, minimum is 200us but give it 300us for good measure */
|
|
usleep_range(300, 400);
|
|
}
|
|
|
|
static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
|
|
|
|
sdhci_reset(host, mask);
|
|
|
|
/* Be sure CARD_IS_EMMC stays set */
|
|
sdhci_sparx5_set_emmc(host);
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_sparx5_ops = {
|
|
.set_clock = sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.reset = sdhci_sparx5_reset,
|
|
.adma_write_desc = sdhci_sparx5_adma_write_desc,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
|
|
.quirks = 0,
|
|
.quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
|
|
SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
|
|
.ops = &sdhci_sparx5_ops,
|
|
};
|
|
|
|
static int sdhci_sparx5_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
const char *syscon = "microchip,sparx5-cpu-syscon";
|
|
struct sdhci_host *host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_sparx5_data *sdhci_sparx5;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 value;
|
|
u32 extra;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
|
|
sizeof(*sdhci_sparx5));
|
|
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
/*
|
|
* extra adma table cnt for cross 128M boundary handling.
|
|
*/
|
|
extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
|
|
if (extra > SDHCI_MAX_SEGS)
|
|
extra = SDHCI_MAX_SEGS;
|
|
host->adma_table_cnt += extra;
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
|
|
sdhci_sparx5->host = host;
|
|
|
|
pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
|
|
if (IS_ERR(pltfm_host->clk)) {
|
|
ret = PTR_ERR(pltfm_host->clk);
|
|
dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
|
|
goto free_pltfm;
|
|
}
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret)
|
|
goto free_pltfm;
|
|
|
|
if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
|
|
(value > 0 && value <= MSHC_DLY_CC_MAX))
|
|
sdhci_sparx5->delay_clock = value;
|
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
|
|
if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
|
|
dev_err(&pdev->dev, "No CPU syscon regmap !\n");
|
|
ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
|
|
goto err_clk;
|
|
}
|
|
|
|
if (sdhci_sparx5->delay_clock >= 0)
|
|
sparx5_set_delay(host, sdhci_sparx5->delay_clock);
|
|
|
|
if (!mmc_card_is_removable(host->mmc)) {
|
|
/* Do a HW reset of eMMC card */
|
|
sdhci_sparx5_reset_emmc(host);
|
|
/* Update EMMC_CTRL */
|
|
sdhci_sparx5_set_emmc(host);
|
|
/* If eMMC, disable SD and SDIO */
|
|
host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
|
|
}
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
/* Set AXI bus master to use un-cached access (for DMA) */
|
|
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
|
|
IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
|
|
sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
|
|
|
|
pr_debug("%s: SDHC version: 0x%08x\n",
|
|
mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
|
|
pr_debug("%s: SDHC type: 0x%08x\n",
|
|
mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
|
|
|
|
return ret;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
free_pltfm:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id sdhci_sparx5_of_match[] = {
|
|
{ .compatible = "microchip,dw-sparx5-sdhci" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
|
|
|
|
static struct platform_driver sdhci_sparx5_driver = {
|
|
.driver = {
|
|
.name = "sdhci-sparx5",
|
|
.of_match_table = sdhci_sparx5_of_match,
|
|
.pm = &sdhci_pltfm_pmops,
|
|
},
|
|
.probe = sdhci_sparx5_probe,
|
|
.remove = sdhci_pltfm_unregister,
|
|
};
|
|
|
|
module_platform_driver(sdhci_sparx5_driver);
|
|
|
|
MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
|
|
MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
|
|
MODULE_LICENSE("GPL v2");
|