mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
f3f5ba42c5
The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2599 lines
70 KiB
C
2599 lines
70 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD
|
|
*
|
|
* Copyright(C) 2010 Jarod Wilson <jarod@wilsonet.com>
|
|
* Portions based on the original lirc_imon driver,
|
|
* Copyright(C) 2004 Venky Raju(dev@venky.ws)
|
|
*
|
|
* Huge thanks to R. Geoff Newbury for invaluable debugging on the
|
|
* 0xffdc iMON devices, and for sending me one to hack on, without
|
|
* which the support for them wouldn't be nearly as good. Thanks
|
|
* also to the numerous 0xffdc device owners that tested auto-config
|
|
* support for me and provided debug dumps from their devices.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ktime.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/ratelimit.h>
|
|
|
|
#include <linux/input.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/input.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#include <linux/timer.h>
|
|
|
|
#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
|
|
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
|
|
#define MOD_NAME "imon"
|
|
#define MOD_VERSION "0.9.4"
|
|
|
|
#define DISPLAY_MINOR_BASE 144
|
|
#define DEVICE_NAME "lcd%d"
|
|
|
|
#define BUF_CHUNK_SIZE 8
|
|
#define BUF_SIZE 128
|
|
|
|
#define BIT_DURATION 250 /* each bit received is 250us */
|
|
|
|
#define IMON_CLOCK_ENABLE_PACKETS 2
|
|
|
|
/*** P R O T O T Y P E S ***/
|
|
|
|
/* USB Callback prototypes */
|
|
static int imon_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id);
|
|
static void imon_disconnect(struct usb_interface *interface);
|
|
static void usb_rx_callback_intf0(struct urb *urb);
|
|
static void usb_rx_callback_intf1(struct urb *urb);
|
|
static void usb_tx_callback(struct urb *urb);
|
|
|
|
/* suspend/resume support */
|
|
static int imon_resume(struct usb_interface *intf);
|
|
static int imon_suspend(struct usb_interface *intf, pm_message_t message);
|
|
|
|
/* Display file_operations function prototypes */
|
|
static int display_open(struct inode *inode, struct file *file);
|
|
static int display_close(struct inode *inode, struct file *file);
|
|
|
|
/* VFD write operation */
|
|
static ssize_t vfd_write(struct file *file, const char __user *buf,
|
|
size_t n_bytes, loff_t *pos);
|
|
|
|
/* LCD file_operations override function prototypes */
|
|
static ssize_t lcd_write(struct file *file, const char __user *buf,
|
|
size_t n_bytes, loff_t *pos);
|
|
|
|
/*** G L O B A L S ***/
|
|
|
|
struct imon_panel_key_table {
|
|
u64 hw_code;
|
|
u32 keycode;
|
|
};
|
|
|
|
struct imon_usb_dev_descr {
|
|
__u16 flags;
|
|
#define IMON_NO_FLAGS 0
|
|
#define IMON_NEED_20MS_PKT_DELAY 1
|
|
#define IMON_SUPPRESS_REPEATED_KEYS 2
|
|
struct imon_panel_key_table key_table[];
|
|
};
|
|
|
|
struct imon_context {
|
|
struct device *dev;
|
|
/* Newer devices have two interfaces */
|
|
struct usb_device *usbdev_intf0;
|
|
struct usb_device *usbdev_intf1;
|
|
|
|
bool display_supported; /* not all controllers do */
|
|
bool display_isopen; /* display port has been opened */
|
|
bool rf_device; /* true if iMON 2.4G LT/DT RF device */
|
|
bool rf_isassociating; /* RF remote associating */
|
|
bool dev_present_intf0; /* USB device presence, interface 0 */
|
|
bool dev_present_intf1; /* USB device presence, interface 1 */
|
|
|
|
struct mutex lock; /* to lock this object */
|
|
wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
|
|
|
|
struct usb_endpoint_descriptor *rx_endpoint_intf0;
|
|
struct usb_endpoint_descriptor *rx_endpoint_intf1;
|
|
struct usb_endpoint_descriptor *tx_endpoint;
|
|
struct urb *rx_urb_intf0;
|
|
struct urb *rx_urb_intf1;
|
|
struct urb *tx_urb;
|
|
bool tx_control;
|
|
unsigned char usb_rx_buf[8];
|
|
unsigned char usb_tx_buf[8];
|
|
unsigned int send_packet_delay;
|
|
|
|
struct tx_t {
|
|
unsigned char data_buf[35]; /* user data buffer */
|
|
struct completion finished; /* wait for write to finish */
|
|
bool busy; /* write in progress */
|
|
int status; /* status of tx completion */
|
|
} tx;
|
|
|
|
u16 vendor; /* usb vendor ID */
|
|
u16 product; /* usb product ID */
|
|
|
|
struct rc_dev *rdev; /* rc-core device for remote */
|
|
struct input_dev *idev; /* input device for panel & IR mouse */
|
|
struct input_dev *touch; /* input device for touchscreen */
|
|
|
|
spinlock_t kc_lock; /* make sure we get keycodes right */
|
|
u32 kc; /* current input keycode */
|
|
u32 last_keycode; /* last reported input keycode */
|
|
u32 rc_scancode; /* the computed remote scancode */
|
|
u8 rc_toggle; /* the computed remote toggle bit */
|
|
u64 rc_proto; /* iMON or MCE (RC6) IR protocol? */
|
|
bool release_code; /* some keys send a release code */
|
|
|
|
u8 display_type; /* store the display type */
|
|
bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */
|
|
|
|
char name_rdev[128]; /* rc input device name */
|
|
char phys_rdev[64]; /* rc input device phys path */
|
|
|
|
char name_idev[128]; /* input device name */
|
|
char phys_idev[64]; /* input device phys path */
|
|
|
|
char name_touch[128]; /* touch screen name */
|
|
char phys_touch[64]; /* touch screen phys path */
|
|
struct timer_list ttimer; /* touch screen timer */
|
|
int touch_x; /* x coordinate on touchscreen */
|
|
int touch_y; /* y coordinate on touchscreen */
|
|
const struct imon_usb_dev_descr *dev_descr;
|
|
/* device description with key */
|
|
/* table for front panels */
|
|
};
|
|
|
|
#define TOUCH_TIMEOUT (HZ/30)
|
|
|
|
/* vfd character device file operations */
|
|
static const struct file_operations vfd_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = &display_open,
|
|
.write = &vfd_write,
|
|
.release = &display_close,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
/* lcd character device file operations */
|
|
static const struct file_operations lcd_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = &display_open,
|
|
.write = &lcd_write,
|
|
.release = &display_close,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
enum {
|
|
IMON_DISPLAY_TYPE_AUTO = 0,
|
|
IMON_DISPLAY_TYPE_VFD = 1,
|
|
IMON_DISPLAY_TYPE_LCD = 2,
|
|
IMON_DISPLAY_TYPE_VGA = 3,
|
|
IMON_DISPLAY_TYPE_NONE = 4,
|
|
};
|
|
|
|
enum {
|
|
IMON_KEY_IMON = 0,
|
|
IMON_KEY_MCE = 1,
|
|
IMON_KEY_PANEL = 2,
|
|
};
|
|
|
|
static struct usb_class_driver imon_vfd_class = {
|
|
.name = DEVICE_NAME,
|
|
.fops = &vfd_fops,
|
|
.minor_base = DISPLAY_MINOR_BASE,
|
|
};
|
|
|
|
static struct usb_class_driver imon_lcd_class = {
|
|
.name = DEVICE_NAME,
|
|
.fops = &lcd_fops,
|
|
.minor_base = DISPLAY_MINOR_BASE,
|
|
};
|
|
|
|
/* imon receiver front panel/knob key table */
|
|
static const struct imon_usb_dev_descr imon_default_table = {
|
|
.flags = IMON_NO_FLAGS,
|
|
.key_table = {
|
|
{ 0x000000000f00ffeell, KEY_MEDIA }, /* Go */
|
|
{ 0x000000001200ffeell, KEY_UP },
|
|
{ 0x000000001300ffeell, KEY_DOWN },
|
|
{ 0x000000001400ffeell, KEY_LEFT },
|
|
{ 0x000000001500ffeell, KEY_RIGHT },
|
|
{ 0x000000001600ffeell, KEY_ENTER },
|
|
{ 0x000000001700ffeell, KEY_ESC },
|
|
{ 0x000000001f00ffeell, KEY_AUDIO },
|
|
{ 0x000000002000ffeell, KEY_VIDEO },
|
|
{ 0x000000002100ffeell, KEY_CAMERA },
|
|
{ 0x000000002700ffeell, KEY_DVD },
|
|
{ 0x000000002300ffeell, KEY_TV },
|
|
{ 0x000000002b00ffeell, KEY_EXIT },
|
|
{ 0x000000002c00ffeell, KEY_SELECT },
|
|
{ 0x000000002d00ffeell, KEY_MENU },
|
|
{ 0x000000000500ffeell, KEY_PREVIOUS },
|
|
{ 0x000000000700ffeell, KEY_REWIND },
|
|
{ 0x000000000400ffeell, KEY_STOP },
|
|
{ 0x000000003c00ffeell, KEY_PLAYPAUSE },
|
|
{ 0x000000000800ffeell, KEY_FASTFORWARD },
|
|
{ 0x000000000600ffeell, KEY_NEXT },
|
|
{ 0x000000010000ffeell, KEY_RIGHT },
|
|
{ 0x000001000000ffeell, KEY_LEFT },
|
|
{ 0x000000003d00ffeell, KEY_SELECT },
|
|
{ 0x000100000000ffeell, KEY_VOLUMEUP },
|
|
{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000000000100ffeell, KEY_MUTE },
|
|
/* 0xffdc iMON MCE VFD */
|
|
{ 0x00010000ffffffeell, KEY_VOLUMEUP },
|
|
{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
|
|
{ 0x00000001ffffffeell, KEY_MUTE },
|
|
{ 0x0000000fffffffeell, KEY_MEDIA },
|
|
{ 0x00000012ffffffeell, KEY_UP },
|
|
{ 0x00000013ffffffeell, KEY_DOWN },
|
|
{ 0x00000014ffffffeell, KEY_LEFT },
|
|
{ 0x00000015ffffffeell, KEY_RIGHT },
|
|
{ 0x00000016ffffffeell, KEY_ENTER },
|
|
{ 0x00000017ffffffeell, KEY_ESC },
|
|
/* iMON Knob values */
|
|
{ 0x000100ffffffffeell, KEY_VOLUMEUP },
|
|
{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000008ffffffffeell, KEY_MUTE },
|
|
{ 0, KEY_RESERVED },
|
|
}
|
|
};
|
|
|
|
static const struct imon_usb_dev_descr imon_OEM_VFD = {
|
|
.flags = IMON_NEED_20MS_PKT_DELAY,
|
|
.key_table = {
|
|
{ 0x000000000f00ffeell, KEY_MEDIA }, /* Go */
|
|
{ 0x000000001200ffeell, KEY_UP },
|
|
{ 0x000000001300ffeell, KEY_DOWN },
|
|
{ 0x000000001400ffeell, KEY_LEFT },
|
|
{ 0x000000001500ffeell, KEY_RIGHT },
|
|
{ 0x000000001600ffeell, KEY_ENTER },
|
|
{ 0x000000001700ffeell, KEY_ESC },
|
|
{ 0x000000001f00ffeell, KEY_AUDIO },
|
|
{ 0x000000002b00ffeell, KEY_EXIT },
|
|
{ 0x000000002c00ffeell, KEY_SELECT },
|
|
{ 0x000000002d00ffeell, KEY_MENU },
|
|
{ 0x000000000500ffeell, KEY_PREVIOUS },
|
|
{ 0x000000000700ffeell, KEY_REWIND },
|
|
{ 0x000000000400ffeell, KEY_STOP },
|
|
{ 0x000000003c00ffeell, KEY_PLAYPAUSE },
|
|
{ 0x000000000800ffeell, KEY_FASTFORWARD },
|
|
{ 0x000000000600ffeell, KEY_NEXT },
|
|
{ 0x000000010000ffeell, KEY_RIGHT },
|
|
{ 0x000001000000ffeell, KEY_LEFT },
|
|
{ 0x000000003d00ffeell, KEY_SELECT },
|
|
{ 0x000100000000ffeell, KEY_VOLUMEUP },
|
|
{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000000000100ffeell, KEY_MUTE },
|
|
/* 0xffdc iMON MCE VFD */
|
|
{ 0x00010000ffffffeell, KEY_VOLUMEUP },
|
|
{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
|
|
{ 0x00000001ffffffeell, KEY_MUTE },
|
|
{ 0x0000000fffffffeell, KEY_MEDIA },
|
|
{ 0x00000012ffffffeell, KEY_UP },
|
|
{ 0x00000013ffffffeell, KEY_DOWN },
|
|
{ 0x00000014ffffffeell, KEY_LEFT },
|
|
{ 0x00000015ffffffeell, KEY_RIGHT },
|
|
{ 0x00000016ffffffeell, KEY_ENTER },
|
|
{ 0x00000017ffffffeell, KEY_ESC },
|
|
/* iMON Knob values */
|
|
{ 0x000100ffffffffeell, KEY_VOLUMEUP },
|
|
{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000008ffffffffeell, KEY_MUTE },
|
|
{ 0, KEY_RESERVED },
|
|
}
|
|
};
|
|
|
|
/* imon receiver front panel/knob key table for DH102*/
|
|
static const struct imon_usb_dev_descr imon_DH102 = {
|
|
.flags = IMON_NO_FLAGS,
|
|
.key_table = {
|
|
{ 0x000100000000ffeell, KEY_VOLUMEUP },
|
|
{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000000010000ffeell, KEY_MUTE },
|
|
{ 0x0000000f0000ffeell, KEY_MEDIA },
|
|
{ 0x000000120000ffeell, KEY_UP },
|
|
{ 0x000000130000ffeell, KEY_DOWN },
|
|
{ 0x000000140000ffeell, KEY_LEFT },
|
|
{ 0x000000150000ffeell, KEY_RIGHT },
|
|
{ 0x000000160000ffeell, KEY_ENTER },
|
|
{ 0x000000170000ffeell, KEY_ESC },
|
|
{ 0x0000002b0000ffeell, KEY_EXIT },
|
|
{ 0x0000002c0000ffeell, KEY_SELECT },
|
|
{ 0x0000002d0000ffeell, KEY_MENU },
|
|
{ 0, KEY_RESERVED }
|
|
}
|
|
};
|
|
|
|
/* imon ultrabay front panel key table */
|
|
static const struct imon_usb_dev_descr ultrabay_table = {
|
|
.flags = IMON_SUPPRESS_REPEATED_KEYS,
|
|
.key_table = {
|
|
{ 0x0000000f0000ffeell, KEY_MEDIA }, /* Go */
|
|
{ 0x000000000100ffeell, KEY_UP },
|
|
{ 0x000000000001ffeell, KEY_DOWN },
|
|
{ 0x000000160000ffeell, KEY_ENTER },
|
|
{ 0x0000001f0000ffeell, KEY_AUDIO }, /* Music */
|
|
{ 0x000000200000ffeell, KEY_VIDEO }, /* Movie */
|
|
{ 0x000000210000ffeell, KEY_CAMERA }, /* Photo */
|
|
{ 0x000000270000ffeell, KEY_DVD }, /* DVD */
|
|
{ 0x000000230000ffeell, KEY_TV }, /* TV */
|
|
{ 0x000000050000ffeell, KEY_PREVIOUS }, /* Previous */
|
|
{ 0x000000070000ffeell, KEY_REWIND },
|
|
{ 0x000000040000ffeell, KEY_STOP },
|
|
{ 0x000000020000ffeell, KEY_PLAYPAUSE },
|
|
{ 0x000000080000ffeell, KEY_FASTFORWARD },
|
|
{ 0x000000060000ffeell, KEY_NEXT }, /* Next */
|
|
{ 0x000100000000ffeell, KEY_VOLUMEUP },
|
|
{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
|
|
{ 0x000000010000ffeell, KEY_MUTE },
|
|
{ 0, KEY_RESERVED },
|
|
}
|
|
};
|
|
|
|
/*
|
|
* USB Device ID for iMON USB Control Boards
|
|
*
|
|
* The Windows drivers contain 6 different inf files, more or less one for
|
|
* each new device until the 0x0034-0x0046 devices, which all use the same
|
|
* driver. Some of the devices in the 34-46 range haven't been definitively
|
|
* identified yet. Early devices have either a TriGem Computer, Inc. or a
|
|
* Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
|
|
* devices use the SoundGraph vendor ID (0x15c2). This driver only supports
|
|
* the ffdc and later devices, which do onboard decoding.
|
|
*/
|
|
static const struct usb_device_id imon_usb_id_table[] = {
|
|
/*
|
|
* Several devices with this same device ID, all use iMON_PAD.inf
|
|
* SoundGraph iMON PAD (IR & VFD)
|
|
* SoundGraph iMON PAD (IR & LCD)
|
|
* SoundGraph iMON Knob (IR only)
|
|
*/
|
|
{ USB_DEVICE(0x15c2, 0xffdc),
|
|
.driver_info = (unsigned long)&imon_default_table },
|
|
|
|
/*
|
|
* Newer devices, all driven by the latest iMON Windows driver, full
|
|
* list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
|
|
* Need user input to fill in details on unknown devices.
|
|
*/
|
|
/* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
|
|
{ USB_DEVICE(0x15c2, 0x0034),
|
|
.driver_info = (unsigned long)&imon_DH102 },
|
|
/* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
|
|
{ USB_DEVICE(0x15c2, 0x0035),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* SoundGraph iMON OEM VFD (IR & VFD) */
|
|
{ USB_DEVICE(0x15c2, 0x0036),
|
|
.driver_info = (unsigned long)&imon_OEM_VFD },
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x0037),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* SoundGraph iMON OEM LCD (IR & LCD) */
|
|
{ USB_DEVICE(0x15c2, 0x0038),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* SoundGraph iMON UltraBay (IR & LCD) */
|
|
{ USB_DEVICE(0x15c2, 0x0039),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x003a),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x003b),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* SoundGraph iMON OEM Inside (IR only) */
|
|
{ USB_DEVICE(0x15c2, 0x003c),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x003d),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x003e),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x003f),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x0040),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* SoundGraph iMON MINI (IR only) */
|
|
{ USB_DEVICE(0x15c2, 0x0041),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* Antec Veris Multimedia Station EZ External (IR only) */
|
|
{ USB_DEVICE(0x15c2, 0x0042),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* Antec Veris Multimedia Station Basic Internal (IR only) */
|
|
{ USB_DEVICE(0x15c2, 0x0043),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* Antec Veris Multimedia Station Elite (IR & VFD) */
|
|
{ USB_DEVICE(0x15c2, 0x0044),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* Antec Veris Multimedia Station Premiere (IR & LCD) */
|
|
{ USB_DEVICE(0x15c2, 0x0045),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
/* device specifics unknown */
|
|
{ USB_DEVICE(0x15c2, 0x0046),
|
|
.driver_info = (unsigned long)&imon_default_table},
|
|
{}
|
|
};
|
|
|
|
/* USB Device data */
|
|
static struct usb_driver imon_driver = {
|
|
.name = MOD_NAME,
|
|
.probe = imon_probe,
|
|
.disconnect = imon_disconnect,
|
|
.suspend = imon_suspend,
|
|
.resume = imon_resume,
|
|
.id_table = imon_usb_id_table,
|
|
};
|
|
|
|
/* to prevent races between open() and disconnect(), probing, etc */
|
|
static DEFINE_MUTEX(driver_lock);
|
|
|
|
/* Module bookkeeping bits */
|
|
MODULE_AUTHOR(MOD_AUTHOR);
|
|
MODULE_DESCRIPTION(MOD_DESC);
|
|
MODULE_VERSION(MOD_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
|
|
|
|
static bool debug;
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
|
|
|
|
/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
|
|
static int display_type;
|
|
module_param(display_type, int, S_IRUGO);
|
|
MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, 1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
|
|
|
|
static int pad_stabilize = 1;
|
|
module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD presses in arrow key mode. 0=disable, 1=enable (default).");
|
|
|
|
/*
|
|
* In certain use cases, mouse mode isn't really helpful, and could actually
|
|
* cause confusion, so allow disabling it when the IR device is open.
|
|
*/
|
|
static bool nomouse;
|
|
module_param(nomouse, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is open. 0=don't disable, 1=disable. (default: don't disable)");
|
|
|
|
/* threshold at which a pad push registers as an arrow key in kbd mode */
|
|
static int pad_thresh;
|
|
module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an arrow key in kbd mode (default: 28)");
|
|
|
|
|
|
static void free_imon_context(struct imon_context *ictx)
|
|
{
|
|
struct device *dev = ictx->dev;
|
|
|
|
usb_free_urb(ictx->tx_urb);
|
|
usb_free_urb(ictx->rx_urb_intf0);
|
|
usb_free_urb(ictx->rx_urb_intf1);
|
|
kfree(ictx);
|
|
|
|
dev_dbg(dev, "%s: iMON context freed\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* Called when the Display device (e.g. /dev/lcd0)
|
|
* is opened by the application.
|
|
*/
|
|
static int display_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct usb_interface *interface;
|
|
struct imon_context *ictx = NULL;
|
|
int subminor;
|
|
int retval = 0;
|
|
|
|
/* prevent races with disconnect */
|
|
mutex_lock(&driver_lock);
|
|
|
|
subminor = iminor(inode);
|
|
interface = usb_find_interface(&imon_driver, subminor);
|
|
if (!interface) {
|
|
pr_err("could not find interface for minor %d\n", subminor);
|
|
retval = -ENODEV;
|
|
goto exit;
|
|
}
|
|
ictx = usb_get_intfdata(interface);
|
|
|
|
if (!ictx) {
|
|
pr_err("no context found for minor %d\n", subminor);
|
|
retval = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->display_supported) {
|
|
pr_err("display not supported by device\n");
|
|
retval = -ENODEV;
|
|
} else if (ictx->display_isopen) {
|
|
pr_err("display port is already open\n");
|
|
retval = -EBUSY;
|
|
} else {
|
|
ictx->display_isopen = true;
|
|
file->private_data = ictx;
|
|
dev_dbg(ictx->dev, "display port opened\n");
|
|
}
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
exit:
|
|
mutex_unlock(&driver_lock);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Called when the display device (e.g. /dev/lcd0)
|
|
* is closed by the application.
|
|
*/
|
|
static int display_close(struct inode *inode, struct file *file)
|
|
{
|
|
struct imon_context *ictx = NULL;
|
|
int retval = 0;
|
|
|
|
ictx = file->private_data;
|
|
|
|
if (!ictx) {
|
|
pr_err("no context for device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->display_supported) {
|
|
pr_err("display not supported by device\n");
|
|
retval = -ENODEV;
|
|
} else if (!ictx->display_isopen) {
|
|
pr_err("display is not open\n");
|
|
retval = -EIO;
|
|
} else {
|
|
ictx->display_isopen = false;
|
|
dev_dbg(ictx->dev, "display port closed\n");
|
|
}
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Sends a packet to the device -- this function must be called with
|
|
* ictx->lock held, or its unlock/lock sequence while waiting for tx
|
|
* to complete can/will lead to a deadlock.
|
|
*/
|
|
static int send_packet(struct imon_context *ictx)
|
|
{
|
|
unsigned int pipe;
|
|
unsigned long timeout;
|
|
int interval = 0;
|
|
int retval = 0;
|
|
struct usb_ctrlrequest *control_req = NULL;
|
|
|
|
/* Check if we need to use control or interrupt urb */
|
|
if (!ictx->tx_control) {
|
|
pipe = usb_sndintpipe(ictx->usbdev_intf0,
|
|
ictx->tx_endpoint->bEndpointAddress);
|
|
interval = ictx->tx_endpoint->bInterval;
|
|
|
|
usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
|
|
ictx->usb_tx_buf,
|
|
sizeof(ictx->usb_tx_buf),
|
|
usb_tx_callback, ictx, interval);
|
|
|
|
ictx->tx_urb->actual_length = 0;
|
|
} else {
|
|
/* fill request into kmalloc'ed space: */
|
|
control_req = kmalloc(sizeof(*control_req), GFP_KERNEL);
|
|
if (control_req == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* setup packet is '21 09 0200 0001 0008' */
|
|
control_req->bRequestType = 0x21;
|
|
control_req->bRequest = 0x09;
|
|
control_req->wValue = cpu_to_le16(0x0200);
|
|
control_req->wIndex = cpu_to_le16(0x0001);
|
|
control_req->wLength = cpu_to_le16(0x0008);
|
|
|
|
/* control pipe is endpoint 0x00 */
|
|
pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
|
|
|
|
/* build the control urb */
|
|
usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
|
|
pipe, (unsigned char *)control_req,
|
|
ictx->usb_tx_buf,
|
|
sizeof(ictx->usb_tx_buf),
|
|
usb_tx_callback, ictx);
|
|
ictx->tx_urb->actual_length = 0;
|
|
}
|
|
|
|
reinit_completion(&ictx->tx.finished);
|
|
ictx->tx.busy = true;
|
|
smp_rmb(); /* ensure later readers know we're busy */
|
|
|
|
retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
|
|
if (retval) {
|
|
ictx->tx.busy = false;
|
|
smp_rmb(); /* ensure later readers know we're not busy */
|
|
pr_err_ratelimited("error submitting urb(%d)\n", retval);
|
|
} else {
|
|
/* Wait for transmission to complete (or abort) */
|
|
mutex_unlock(&ictx->lock);
|
|
retval = wait_for_completion_interruptible(
|
|
&ictx->tx.finished);
|
|
if (retval) {
|
|
usb_kill_urb(ictx->tx_urb);
|
|
pr_err_ratelimited("task interrupted\n");
|
|
}
|
|
mutex_lock(&ictx->lock);
|
|
|
|
retval = ictx->tx.status;
|
|
if (retval)
|
|
pr_err_ratelimited("packet tx failed (%d)\n", retval);
|
|
}
|
|
|
|
kfree(control_req);
|
|
|
|
/*
|
|
* Induce a mandatory delay before returning, as otherwise,
|
|
* send_packet can get called so rapidly as to overwhelm the device,
|
|
* particularly on faster systems and/or those with quirky usb.
|
|
*/
|
|
timeout = msecs_to_jiffies(ictx->send_packet_delay);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Sends an associate packet to the iMON 2.4G.
|
|
*
|
|
* This might not be such a good idea, since it has an id collision with
|
|
* some versions of the "IR & VFD" combo. The only way to determine if it
|
|
* is an RF version is to look at the product description string. (Which
|
|
* we currently do not fetch).
|
|
*/
|
|
static int send_associate_24g(struct imon_context *ictx)
|
|
{
|
|
int retval;
|
|
const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x20 };
|
|
|
|
if (!ictx) {
|
|
pr_err("no context for device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!ictx->dev_present_intf0) {
|
|
pr_err("no iMON device present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
|
|
retval = send_packet(ictx);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Sends packets to setup and show clock on iMON display
|
|
*
|
|
* Arguments: year - last 2 digits of year, month - 1..12,
|
|
* day - 1..31, dow - day of the week (0-Sun...6-Sat),
|
|
* hour - 0..23, minute - 0..59, second - 0..59
|
|
*/
|
|
static int send_set_imon_clock(struct imon_context *ictx,
|
|
unsigned int year, unsigned int month,
|
|
unsigned int day, unsigned int dow,
|
|
unsigned int hour, unsigned int minute,
|
|
unsigned int second)
|
|
{
|
|
unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
|
|
int retval = 0;
|
|
int i;
|
|
|
|
if (!ictx) {
|
|
pr_err("no context for device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
switch (ictx->display_type) {
|
|
case IMON_DISPLAY_TYPE_LCD:
|
|
clock_enable_pkt[0][0] = 0x80;
|
|
clock_enable_pkt[0][1] = year;
|
|
clock_enable_pkt[0][2] = month-1;
|
|
clock_enable_pkt[0][3] = day;
|
|
clock_enable_pkt[0][4] = hour;
|
|
clock_enable_pkt[0][5] = minute;
|
|
clock_enable_pkt[0][6] = second;
|
|
|
|
clock_enable_pkt[1][0] = 0x80;
|
|
clock_enable_pkt[1][1] = 0;
|
|
clock_enable_pkt[1][2] = 0;
|
|
clock_enable_pkt[1][3] = 0;
|
|
clock_enable_pkt[1][4] = 0;
|
|
clock_enable_pkt[1][5] = 0;
|
|
clock_enable_pkt[1][6] = 0;
|
|
|
|
if (ictx->product == 0xffdc) {
|
|
clock_enable_pkt[0][7] = 0x50;
|
|
clock_enable_pkt[1][7] = 0x51;
|
|
} else {
|
|
clock_enable_pkt[0][7] = 0x88;
|
|
clock_enable_pkt[1][7] = 0x8a;
|
|
}
|
|
|
|
break;
|
|
|
|
case IMON_DISPLAY_TYPE_VFD:
|
|
clock_enable_pkt[0][0] = year;
|
|
clock_enable_pkt[0][1] = month-1;
|
|
clock_enable_pkt[0][2] = day;
|
|
clock_enable_pkt[0][3] = dow;
|
|
clock_enable_pkt[0][4] = hour;
|
|
clock_enable_pkt[0][5] = minute;
|
|
clock_enable_pkt[0][6] = second;
|
|
clock_enable_pkt[0][7] = 0x40;
|
|
|
|
clock_enable_pkt[1][0] = 0;
|
|
clock_enable_pkt[1][1] = 0;
|
|
clock_enable_pkt[1][2] = 1;
|
|
clock_enable_pkt[1][3] = 0;
|
|
clock_enable_pkt[1][4] = 0;
|
|
clock_enable_pkt[1][5] = 0;
|
|
clock_enable_pkt[1][6] = 0;
|
|
clock_enable_pkt[1][7] = 0x42;
|
|
|
|
break;
|
|
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
|
|
memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
|
|
retval = send_packet(ictx);
|
|
if (retval) {
|
|
pr_err("send_packet failed for packet %d\n", i);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* These are the sysfs functions to handle the association on the iMON 2.4G LT.
|
|
*/
|
|
static ssize_t show_associate_remote(struct device *d,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct imon_context *ictx = dev_get_drvdata(d);
|
|
|
|
if (!ictx)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&ictx->lock);
|
|
if (ictx->rf_isassociating)
|
|
strscpy(buf, "associating\n", PAGE_SIZE);
|
|
else
|
|
strscpy(buf, "closed\n", PAGE_SIZE);
|
|
|
|
dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for instructions on how to associate your iMON 2.4G DT/LT remote\n");
|
|
mutex_unlock(&ictx->lock);
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t store_associate_remote(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct imon_context *ictx;
|
|
|
|
ictx = dev_get_drvdata(d);
|
|
|
|
if (!ictx)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&ictx->lock);
|
|
ictx->rf_isassociating = true;
|
|
send_associate_24g(ictx);
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* sysfs functions to control internal imon clock
|
|
*/
|
|
static ssize_t show_imon_clock(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct imon_context *ictx = dev_get_drvdata(d);
|
|
size_t len;
|
|
|
|
if (!ictx)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->display_supported) {
|
|
len = snprintf(buf, PAGE_SIZE, "Not supported.");
|
|
} else {
|
|
len = snprintf(buf, PAGE_SIZE,
|
|
"To set the clock on your iMON display:\n"
|
|
"# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
|
|
"%s", ictx->display_isopen ?
|
|
"\nNOTE: imon device must be closed\n" : "");
|
|
}
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t store_imon_clock(struct device *d,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct imon_context *ictx = dev_get_drvdata(d);
|
|
ssize_t retval;
|
|
unsigned int year, month, day, dow, hour, minute, second;
|
|
|
|
if (!ictx)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->display_supported) {
|
|
retval = -ENODEV;
|
|
goto exit;
|
|
} else if (ictx->display_isopen) {
|
|
retval = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow,
|
|
&hour, &minute, &second) != 7) {
|
|
retval = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
if ((month < 1 || month > 12) ||
|
|
(day < 1 || day > 31) || (dow > 6) ||
|
|
(hour > 23) || (minute > 59) || (second > 59)) {
|
|
retval = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
retval = send_set_imon_clock(ictx, year, month, day, dow,
|
|
hour, minute, second);
|
|
if (retval)
|
|
goto exit;
|
|
|
|
retval = count;
|
|
exit:
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
|
|
store_imon_clock);
|
|
|
|
static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
|
|
store_associate_remote);
|
|
|
|
static struct attribute *imon_display_sysfs_entries[] = {
|
|
&dev_attr_imon_clock.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group imon_display_attr_group = {
|
|
.attrs = imon_display_sysfs_entries
|
|
};
|
|
|
|
static struct attribute *imon_rf_sysfs_entries[] = {
|
|
&dev_attr_associate_remote.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group imon_rf_attr_group = {
|
|
.attrs = imon_rf_sysfs_entries
|
|
};
|
|
|
|
/*
|
|
* Writes data to the VFD. The iMON VFD is 2x16 characters
|
|
* and requires data in 5 consecutive USB interrupt packets,
|
|
* each packet but the last carrying 7 bytes.
|
|
*
|
|
* I don't know if the VFD board supports features such as
|
|
* scrolling, clearing rows, blanking, etc. so at
|
|
* the caller must provide a full screen of data. If fewer
|
|
* than 32 bytes are provided spaces will be appended to
|
|
* generate a full screen.
|
|
*/
|
|
static ssize_t vfd_write(struct file *file, const char __user *buf,
|
|
size_t n_bytes, loff_t *pos)
|
|
{
|
|
int i;
|
|
int offset;
|
|
int seq;
|
|
int retval = 0;
|
|
struct imon_context *ictx;
|
|
static const unsigned char vfd_packet6[] = {
|
|
0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
|
|
|
|
ictx = file->private_data;
|
|
if (!ictx) {
|
|
pr_err_ratelimited("no context for device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->dev_present_intf0) {
|
|
pr_err_ratelimited("no iMON device present\n");
|
|
retval = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
if (n_bytes <= 0 || n_bytes > 32) {
|
|
pr_err_ratelimited("invalid payload size\n");
|
|
retval = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
|
|
retval = -EFAULT;
|
|
goto exit;
|
|
}
|
|
|
|
/* Pad with spaces */
|
|
for (i = n_bytes; i < 32; ++i)
|
|
ictx->tx.data_buf[i] = ' ';
|
|
|
|
for (i = 32; i < 35; ++i)
|
|
ictx->tx.data_buf[i] = 0xFF;
|
|
|
|
offset = 0;
|
|
seq = 0;
|
|
|
|
do {
|
|
memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
|
|
ictx->usb_tx_buf[7] = (unsigned char) seq;
|
|
|
|
retval = send_packet(ictx);
|
|
if (retval) {
|
|
pr_err_ratelimited("send packet #%d failed\n", seq / 2);
|
|
goto exit;
|
|
} else {
|
|
seq += 2;
|
|
offset += 7;
|
|
}
|
|
|
|
} while (offset < 35);
|
|
|
|
/* Send packet #6 */
|
|
memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
|
|
ictx->usb_tx_buf[7] = (unsigned char) seq;
|
|
retval = send_packet(ictx);
|
|
if (retval)
|
|
pr_err_ratelimited("send packet #%d failed\n", seq / 2);
|
|
|
|
exit:
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
return (!retval) ? n_bytes : retval;
|
|
}
|
|
|
|
/*
|
|
* Writes data to the LCD. The iMON OEM LCD screen expects 8-byte
|
|
* packets. We accept data as 16 hexadecimal digits, followed by a
|
|
* newline (to make it easy to drive the device from a command-line
|
|
* -- even though the actual binary data is a bit complicated).
|
|
*
|
|
* The device itself is not a "traditional" text-mode display. It's
|
|
* actually a 16x96 pixel bitmap display. That means if you want to
|
|
* display text, you've got to have your own "font" and translate the
|
|
* text into bitmaps for display. This is really flexible (you can
|
|
* display whatever diacritics you need, and so on), but it's also
|
|
* a lot more complicated than most LCDs...
|
|
*/
|
|
static ssize_t lcd_write(struct file *file, const char __user *buf,
|
|
size_t n_bytes, loff_t *pos)
|
|
{
|
|
int retval = 0;
|
|
struct imon_context *ictx;
|
|
|
|
ictx = file->private_data;
|
|
if (!ictx) {
|
|
pr_err_ratelimited("no context for device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (!ictx->display_supported) {
|
|
pr_err_ratelimited("no iMON display present\n");
|
|
retval = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
if (n_bytes != 8) {
|
|
pr_err_ratelimited("invalid payload size: %d (expected 8)\n",
|
|
(int)n_bytes);
|
|
retval = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
|
|
retval = -EFAULT;
|
|
goto exit;
|
|
}
|
|
|
|
retval = send_packet(ictx);
|
|
if (retval) {
|
|
pr_err_ratelimited("send packet failed!\n");
|
|
goto exit;
|
|
} else {
|
|
dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
|
|
__func__, (int) n_bytes);
|
|
}
|
|
exit:
|
|
mutex_unlock(&ictx->lock);
|
|
return (!retval) ? n_bytes : retval;
|
|
}
|
|
|
|
/*
|
|
* Callback function for USB core API: transmit data
|
|
*/
|
|
static void usb_tx_callback(struct urb *urb)
|
|
{
|
|
struct imon_context *ictx;
|
|
|
|
if (!urb)
|
|
return;
|
|
ictx = (struct imon_context *)urb->context;
|
|
if (!ictx)
|
|
return;
|
|
|
|
ictx->tx.status = urb->status;
|
|
|
|
/* notify waiters that write has finished */
|
|
ictx->tx.busy = false;
|
|
smp_rmb(); /* ensure later readers know we're not busy */
|
|
complete(&ictx->tx.finished);
|
|
}
|
|
|
|
/*
|
|
* report touchscreen input
|
|
*/
|
|
static void imon_touch_display_timeout(struct timer_list *t)
|
|
{
|
|
struct imon_context *ictx = from_timer(ictx, t, ttimer);
|
|
|
|
if (ictx->display_type != IMON_DISPLAY_TYPE_VGA)
|
|
return;
|
|
|
|
input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
|
|
input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
|
|
input_report_key(ictx->touch, BTN_TOUCH, 0x00);
|
|
input_sync(ictx->touch);
|
|
}
|
|
|
|
/*
|
|
* iMON IR receivers support two different signal sets -- those used by
|
|
* the iMON remotes, and those used by the Windows MCE remotes (which is
|
|
* really just RC-6), but only one or the other at a time, as the signals
|
|
* are decoded onboard the receiver.
|
|
*
|
|
* This function gets called two different ways, one way is from
|
|
* rc_register_device, for initial protocol selection/setup, and the other is
|
|
* via a userspace-initiated protocol change request, either by direct sysfs
|
|
* prodding or by something like ir-keytable. In the rc_register_device case,
|
|
* the imon context lock is already held, but when initiated from userspace,
|
|
* it is not, so we must acquire it prior to calling send_packet, which
|
|
* requires that the lock is held.
|
|
*/
|
|
static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_proto)
|
|
{
|
|
int retval;
|
|
struct imon_context *ictx = rc->priv;
|
|
struct device *dev = ictx->dev;
|
|
bool unlock = false;
|
|
unsigned char ir_proto_packet[] = {
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
|
|
|
|
if (*rc_proto && !(*rc_proto & rc->allowed_protocols))
|
|
dev_warn(dev, "Looks like you're trying to use an IR protocol this device does not support\n");
|
|
|
|
if (*rc_proto & RC_PROTO_BIT_RC6_MCE) {
|
|
dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
|
|
ir_proto_packet[0] = 0x01;
|
|
*rc_proto = RC_PROTO_BIT_RC6_MCE;
|
|
} else if (*rc_proto & RC_PROTO_BIT_IMON) {
|
|
dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
|
|
if (!pad_stabilize)
|
|
dev_dbg(dev, "PAD stabilize functionality disabled\n");
|
|
/* ir_proto_packet[0] = 0x00; // already the default */
|
|
*rc_proto = RC_PROTO_BIT_IMON;
|
|
} else {
|
|
dev_warn(dev, "Unsupported IR protocol specified, overriding to iMON IR protocol\n");
|
|
if (!pad_stabilize)
|
|
dev_dbg(dev, "PAD stabilize functionality disabled\n");
|
|
/* ir_proto_packet[0] = 0x00; // already the default */
|
|
*rc_proto = RC_PROTO_BIT_IMON;
|
|
}
|
|
|
|
memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
|
|
|
|
if (!mutex_is_locked(&ictx->lock)) {
|
|
unlock = true;
|
|
mutex_lock(&ictx->lock);
|
|
}
|
|
|
|
retval = send_packet(ictx);
|
|
if (retval)
|
|
goto out;
|
|
|
|
ictx->rc_proto = *rc_proto;
|
|
ictx->pad_mouse = false;
|
|
|
|
out:
|
|
if (unlock)
|
|
mutex_unlock(&ictx->lock);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* The directional pad behaves a bit differently, depending on whether this is
|
|
* one of the older ffdc devices or a newer device. Newer devices appear to
|
|
* have a higher resolution matrix for more precise mouse movement, but it
|
|
* makes things overly sensitive in keyboard mode, so we do some interesting
|
|
* contortions to make it less touchy. Older devices run through the same
|
|
* routine with shorter timeout and a smaller threshold.
|
|
*/
|
|
static int stabilize(int a, int b, u16 timeout, u16 threshold)
|
|
{
|
|
ktime_t ct;
|
|
static ktime_t prev_time;
|
|
static ktime_t hit_time;
|
|
static int x, y, prev_result, hits;
|
|
int result = 0;
|
|
long msec, msec_hit;
|
|
|
|
ct = ktime_get();
|
|
msec = ktime_ms_delta(ct, prev_time);
|
|
msec_hit = ktime_ms_delta(ct, hit_time);
|
|
|
|
if (msec > 100) {
|
|
x = 0;
|
|
y = 0;
|
|
hits = 0;
|
|
}
|
|
|
|
x += a;
|
|
y += b;
|
|
|
|
prev_time = ct;
|
|
|
|
if (abs(x) > threshold || abs(y) > threshold) {
|
|
if (abs(y) > abs(x))
|
|
result = (y > 0) ? 0x7F : 0x80;
|
|
else
|
|
result = (x > 0) ? 0x7F00 : 0x8000;
|
|
|
|
x = 0;
|
|
y = 0;
|
|
|
|
if (result == prev_result) {
|
|
hits++;
|
|
|
|
if (hits > 3) {
|
|
switch (result) {
|
|
case 0x7F:
|
|
y = 17 * threshold / 30;
|
|
break;
|
|
case 0x80:
|
|
y -= 17 * threshold / 30;
|
|
break;
|
|
case 0x7F00:
|
|
x = 17 * threshold / 30;
|
|
break;
|
|
case 0x8000:
|
|
x -= 17 * threshold / 30;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hits == 2 && msec_hit < timeout) {
|
|
result = 0;
|
|
hits = 1;
|
|
}
|
|
} else {
|
|
prev_result = result;
|
|
hits = 1;
|
|
hit_time = ct;
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
|
|
{
|
|
u32 keycode;
|
|
u32 release;
|
|
bool is_release_code = false;
|
|
|
|
/* Look for the initial press of a button */
|
|
keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
|
|
ictx->rc_toggle = 0x0;
|
|
ictx->rc_scancode = scancode;
|
|
|
|
/* Look for the release of a button */
|
|
if (keycode == KEY_RESERVED) {
|
|
release = scancode & ~0x4000;
|
|
keycode = rc_g_keycode_from_table(ictx->rdev, release);
|
|
if (keycode != KEY_RESERVED)
|
|
is_release_code = true;
|
|
}
|
|
|
|
ictx->release_code = is_release_code;
|
|
|
|
return keycode;
|
|
}
|
|
|
|
static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
|
|
{
|
|
u32 keycode;
|
|
|
|
#define MCE_KEY_MASK 0x7000
|
|
#define MCE_TOGGLE_BIT 0x8000
|
|
|
|
/*
|
|
* On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx
|
|
* (the toggle bit flipping between alternating key presses), while
|
|
* on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep
|
|
* the table trim, we always or in the bits to look up 0x8000ff4xx,
|
|
* but we can't or them into all codes, as some keys are decoded in
|
|
* a different way w/o the same use of the toggle bit...
|
|
*/
|
|
if (scancode & 0x80000000)
|
|
scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
|
|
|
|
ictx->rc_scancode = scancode;
|
|
keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
|
|
|
|
/* not used in mce mode, but make sure we know its false */
|
|
ictx->release_code = false;
|
|
|
|
return keycode;
|
|
}
|
|
|
|
static u32 imon_panel_key_lookup(struct imon_context *ictx, u64 code)
|
|
{
|
|
const struct imon_panel_key_table *key_table;
|
|
u32 keycode = KEY_RESERVED;
|
|
int i;
|
|
|
|
key_table = ictx->dev_descr->key_table;
|
|
|
|
for (i = 0; key_table[i].hw_code != 0; i++) {
|
|
if (key_table[i].hw_code == (code | 0xffee)) {
|
|
keycode = key_table[i].keycode;
|
|
break;
|
|
}
|
|
}
|
|
ictx->release_code = false;
|
|
return keycode;
|
|
}
|
|
|
|
static bool imon_mouse_event(struct imon_context *ictx,
|
|
unsigned char *buf, int len)
|
|
{
|
|
signed char rel_x = 0x00, rel_y = 0x00;
|
|
u8 right_shift = 1;
|
|
bool mouse_input = true;
|
|
int dir = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
|
|
/* newer iMON device PAD or mouse button */
|
|
if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
|
|
rel_x = buf[2];
|
|
rel_y = buf[3];
|
|
right_shift = 1;
|
|
/* 0xffdc iMON PAD or mouse button input */
|
|
} else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
|
|
!((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
|
|
rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
|
|
(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
|
|
if (buf[0] & 0x02)
|
|
rel_x |= ~0x0f;
|
|
rel_x = rel_x + rel_x / 2;
|
|
rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
|
|
(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
|
|
if (buf[0] & 0x01)
|
|
rel_y |= ~0x0f;
|
|
rel_y = rel_y + rel_y / 2;
|
|
right_shift = 2;
|
|
/* some ffdc devices decode mouse buttons differently... */
|
|
} else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
|
|
right_shift = 2;
|
|
/* ch+/- buttons, which we use for an emulated scroll wheel */
|
|
} else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
|
|
dir = 1;
|
|
} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
|
|
dir = -1;
|
|
} else
|
|
mouse_input = false;
|
|
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
|
|
if (mouse_input) {
|
|
dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
|
|
|
|
if (dir) {
|
|
input_report_rel(ictx->idev, REL_WHEEL, dir);
|
|
} else if (rel_x || rel_y) {
|
|
input_report_rel(ictx->idev, REL_X, rel_x);
|
|
input_report_rel(ictx->idev, REL_Y, rel_y);
|
|
} else {
|
|
input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
|
|
input_report_key(ictx->idev, BTN_RIGHT,
|
|
buf[1] >> right_shift & 0x1);
|
|
}
|
|
input_sync(ictx->idev);
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
ictx->last_keycode = ictx->kc;
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
}
|
|
|
|
return mouse_input;
|
|
}
|
|
|
|
static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
|
|
{
|
|
mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
|
|
ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
|
|
ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
|
|
input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
|
|
input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
|
|
input_report_key(ictx->touch, BTN_TOUCH, 0x01);
|
|
input_sync(ictx->touch);
|
|
}
|
|
|
|
static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
|
|
{
|
|
int dir = 0;
|
|
signed char rel_x = 0x00, rel_y = 0x00;
|
|
u16 timeout, threshold;
|
|
u32 scancode = KEY_RESERVED;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* The imon directional pad functions more like a touchpad. Bytes 3 & 4
|
|
* contain a position coordinate (x,y), with each component ranging
|
|
* from -14 to 14. We want to down-sample this to only 4 discrete values
|
|
* for up/down/left/right arrow keys. Also, when you get too close to
|
|
* diagonals, it has a tendency to jump back and forth, so lets try to
|
|
* ignore when they get too close.
|
|
*/
|
|
if (ictx->product != 0xffdc) {
|
|
/* first, pad to 8 bytes so it conforms with everything else */
|
|
buf[5] = buf[6] = buf[7] = 0;
|
|
timeout = 500; /* in msecs */
|
|
/* (2*threshold) x (2*threshold) square */
|
|
threshold = pad_thresh ? pad_thresh : 28;
|
|
rel_x = buf[2];
|
|
rel_y = buf[3];
|
|
|
|
if (ictx->rc_proto == RC_PROTO_BIT_IMON && pad_stabilize) {
|
|
if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
|
|
dir = stabilize((int)rel_x, (int)rel_y,
|
|
timeout, threshold);
|
|
if (!dir) {
|
|
spin_lock_irqsave(&ictx->kc_lock,
|
|
flags);
|
|
ictx->kc = KEY_UNKNOWN;
|
|
spin_unlock_irqrestore(&ictx->kc_lock,
|
|
flags);
|
|
return;
|
|
}
|
|
buf[2] = dir & 0xFF;
|
|
buf[3] = (dir >> 8) & 0xFF;
|
|
scancode = be32_to_cpu(*((__be32 *)buf));
|
|
}
|
|
} else {
|
|
/*
|
|
* Hack alert: instead of using keycodes, we have
|
|
* to use hard-coded scancodes here...
|
|
*/
|
|
if (abs(rel_y) > abs(rel_x)) {
|
|
buf[2] = (rel_y > 0) ? 0x7F : 0x80;
|
|
buf[3] = 0;
|
|
if (rel_y > 0)
|
|
scancode = 0x01007f00; /* KEY_DOWN */
|
|
else
|
|
scancode = 0x01008000; /* KEY_UP */
|
|
} else {
|
|
buf[2] = 0;
|
|
buf[3] = (rel_x > 0) ? 0x7F : 0x80;
|
|
if (rel_x > 0)
|
|
scancode = 0x0100007f; /* KEY_RIGHT */
|
|
else
|
|
scancode = 0x01000080; /* KEY_LEFT */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
|
|
* device (15c2:ffdc). The remote generates various codes from
|
|
* 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
|
|
* 0x688301b7 and the right one 0x688481b7. All other keys generate
|
|
* 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
|
|
* reversed endianness. Extract direction from buffer, rotate endianness,
|
|
* adjust sign and feed the values into stabilize(). The resulting codes
|
|
* will be 0x01008000, 0x01007F00, which match the newer devices.
|
|
*/
|
|
} else {
|
|
timeout = 10; /* in msecs */
|
|
/* (2*threshold) x (2*threshold) square */
|
|
threshold = pad_thresh ? pad_thresh : 15;
|
|
|
|
/* buf[1] is x */
|
|
rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
|
|
(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
|
|
if (buf[0] & 0x02)
|
|
rel_x |= ~0x10+1;
|
|
/* buf[2] is y */
|
|
rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
|
|
(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
|
|
if (buf[0] & 0x01)
|
|
rel_y |= ~0x10+1;
|
|
|
|
buf[0] = 0x01;
|
|
buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
|
|
|
|
if (ictx->rc_proto == RC_PROTO_BIT_IMON && pad_stabilize) {
|
|
dir = stabilize((int)rel_x, (int)rel_y,
|
|
timeout, threshold);
|
|
if (!dir) {
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
ictx->kc = KEY_UNKNOWN;
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
return;
|
|
}
|
|
buf[2] = dir & 0xFF;
|
|
buf[3] = (dir >> 8) & 0xFF;
|
|
scancode = be32_to_cpu(*((__be32 *)buf));
|
|
} else {
|
|
/*
|
|
* Hack alert: instead of using keycodes, we have
|
|
* to use hard-coded scancodes here...
|
|
*/
|
|
if (abs(rel_y) > abs(rel_x)) {
|
|
buf[2] = (rel_y > 0) ? 0x7F : 0x80;
|
|
buf[3] = 0;
|
|
if (rel_y > 0)
|
|
scancode = 0x01007f00; /* KEY_DOWN */
|
|
else
|
|
scancode = 0x01008000; /* KEY_UP */
|
|
} else {
|
|
buf[2] = 0;
|
|
buf[3] = (rel_x > 0) ? 0x7F : 0x80;
|
|
if (rel_x > 0)
|
|
scancode = 0x0100007f; /* KEY_RIGHT */
|
|
else
|
|
scancode = 0x01000080; /* KEY_LEFT */
|
|
}
|
|
}
|
|
}
|
|
|
|
if (scancode) {
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
ictx->kc = imon_remote_key_lookup(ictx, scancode);
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* figure out if these is a press or a release. We don't actually
|
|
* care about repeats, as those will be auto-generated within the IR
|
|
* subsystem for repeating scancodes.
|
|
*/
|
|
static int imon_parse_press_type(struct imon_context *ictx,
|
|
unsigned char *buf, u8 ktype)
|
|
{
|
|
int press_type = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
|
|
/* key release of 0x02XXXXXX key */
|
|
if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00)
|
|
ictx->kc = ictx->last_keycode;
|
|
|
|
/* mouse button release on (some) 0xffdc devices */
|
|
else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 &&
|
|
buf[2] == 0x81 && buf[3] == 0xb7)
|
|
ictx->kc = ictx->last_keycode;
|
|
|
|
/* mouse button release on (some other) 0xffdc devices */
|
|
else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 &&
|
|
buf[2] == 0x81 && buf[3] == 0xb7)
|
|
ictx->kc = ictx->last_keycode;
|
|
|
|
/* mce-specific button handling, no keyup events */
|
|
else if (ktype == IMON_KEY_MCE) {
|
|
ictx->rc_toggle = buf[2];
|
|
press_type = 1;
|
|
|
|
/* incoherent or irrelevant data */
|
|
} else if (ictx->kc == KEY_RESERVED)
|
|
press_type = -EINVAL;
|
|
|
|
/* key release of 0xXXXXXXb7 key */
|
|
else if (ictx->release_code)
|
|
press_type = 0;
|
|
|
|
/* this is a button press */
|
|
else
|
|
press_type = 1;
|
|
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
|
|
return press_type;
|
|
}
|
|
|
|
/*
|
|
* Process the incoming packet
|
|
*/
|
|
static void imon_incoming_packet(struct imon_context *ictx,
|
|
struct urb *urb, int intf)
|
|
{
|
|
int len = urb->actual_length;
|
|
unsigned char *buf = urb->transfer_buffer;
|
|
struct device *dev = ictx->dev;
|
|
unsigned long flags;
|
|
u32 kc;
|
|
u64 scancode;
|
|
int press_type = 0;
|
|
ktime_t t;
|
|
static ktime_t prev_time;
|
|
u8 ktype;
|
|
|
|
/* filter out junk data on the older 0xffdc imon devices */
|
|
if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
|
|
return;
|
|
|
|
/* Figure out what key was pressed */
|
|
if (len == 8 && buf[7] == 0xee) {
|
|
scancode = be64_to_cpu(*((__be64 *)buf));
|
|
ktype = IMON_KEY_PANEL;
|
|
kc = imon_panel_key_lookup(ictx, scancode);
|
|
ictx->release_code = false;
|
|
} else {
|
|
scancode = be32_to_cpu(*((__be32 *)buf));
|
|
if (ictx->rc_proto == RC_PROTO_BIT_RC6_MCE) {
|
|
ktype = IMON_KEY_IMON;
|
|
if (buf[0] == 0x80)
|
|
ktype = IMON_KEY_MCE;
|
|
kc = imon_mce_key_lookup(ictx, scancode);
|
|
} else {
|
|
ktype = IMON_KEY_IMON;
|
|
kc = imon_remote_key_lookup(ictx, scancode);
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
/* keyboard/mouse mode toggle button */
|
|
if (kc == KEY_KEYBOARD && !ictx->release_code) {
|
|
ictx->last_keycode = kc;
|
|
if (!nomouse) {
|
|
ictx->pad_mouse = !ictx->pad_mouse;
|
|
dev_dbg(dev, "toggling to %s mode\n",
|
|
ictx->pad_mouse ? "mouse" : "keyboard");
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
return;
|
|
} else {
|
|
ictx->pad_mouse = false;
|
|
dev_dbg(dev, "mouse mode disabled, passing key value\n");
|
|
}
|
|
}
|
|
|
|
ictx->kc = kc;
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
|
|
/* send touchscreen events through input subsystem if touchpad data */
|
|
if (ictx->touch && len == 8 && buf[7] == 0x86) {
|
|
imon_touch_event(ictx, buf);
|
|
return;
|
|
|
|
/* look for mouse events with pad in mouse mode */
|
|
} else if (ictx->pad_mouse) {
|
|
if (imon_mouse_event(ictx, buf, len))
|
|
return;
|
|
}
|
|
|
|
/* Now for some special handling to convert pad input to arrow keys */
|
|
if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
|
|
((len == 8) && (buf[0] & 0x40) &&
|
|
!(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
|
|
len = 8;
|
|
imon_pad_to_keys(ictx, buf);
|
|
}
|
|
|
|
if (debug) {
|
|
printk(KERN_INFO "intf%d decoded packet: %*ph\n",
|
|
intf, len, buf);
|
|
}
|
|
|
|
press_type = imon_parse_press_type(ictx, buf, ktype);
|
|
if (press_type < 0)
|
|
goto not_input_data;
|
|
|
|
if (ktype != IMON_KEY_PANEL) {
|
|
if (press_type == 0)
|
|
rc_keyup(ictx->rdev);
|
|
else {
|
|
enum rc_proto proto;
|
|
|
|
if (ictx->rc_proto == RC_PROTO_BIT_RC6_MCE)
|
|
proto = RC_PROTO_RC6_MCE;
|
|
else if (ictx->rc_proto == RC_PROTO_BIT_IMON)
|
|
proto = RC_PROTO_IMON;
|
|
else
|
|
return;
|
|
|
|
rc_keydown(ictx->rdev, proto, ictx->rc_scancode,
|
|
ictx->rc_toggle);
|
|
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
ictx->last_keycode = ictx->kc;
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Only panel type events left to process now */
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
|
|
t = ktime_get();
|
|
/* KEY repeats from knob and panel that need to be suppressed */
|
|
if (ictx->kc == KEY_MUTE ||
|
|
ictx->dev_descr->flags & IMON_SUPPRESS_REPEATED_KEYS) {
|
|
if (ictx->kc == ictx->last_keycode &&
|
|
ktime_ms_delta(t, prev_time) < ictx->idev->rep[REP_DELAY]) {
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
return;
|
|
}
|
|
}
|
|
|
|
prev_time = t;
|
|
kc = ictx->kc;
|
|
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
|
|
input_report_key(ictx->idev, kc, press_type);
|
|
input_sync(ictx->idev);
|
|
|
|
/* panel keys don't generate a release */
|
|
input_report_key(ictx->idev, kc, 0);
|
|
input_sync(ictx->idev);
|
|
|
|
spin_lock_irqsave(&ictx->kc_lock, flags);
|
|
ictx->last_keycode = kc;
|
|
spin_unlock_irqrestore(&ictx->kc_lock, flags);
|
|
|
|
return;
|
|
|
|
not_input_data:
|
|
if (len != 8) {
|
|
dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n",
|
|
__func__, len, intf);
|
|
return;
|
|
}
|
|
|
|
/* iMON 2.4G associate frame */
|
|
if (buf[0] == 0x00 &&
|
|
buf[2] == 0xFF && /* REFID */
|
|
buf[3] == 0xFF &&
|
|
buf[4] == 0xFF &&
|
|
buf[5] == 0xFF && /* iMON 2.4G */
|
|
((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */
|
|
(buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
|
|
dev_warn(dev, "%s: remote associated refid=%02X\n",
|
|
__func__, buf[1]);
|
|
ictx->rf_isassociating = false;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Callback function for USB core API: receive data
|
|
*/
|
|
static void usb_rx_callback_intf0(struct urb *urb)
|
|
{
|
|
struct imon_context *ictx;
|
|
int intfnum = 0;
|
|
|
|
if (!urb)
|
|
return;
|
|
|
|
ictx = (struct imon_context *)urb->context;
|
|
if (!ictx)
|
|
return;
|
|
|
|
/*
|
|
* if we get a callback before we're done configuring the hardware, we
|
|
* can't yet process the data, as there's nowhere to send it, but we
|
|
* still need to submit a new rx URB to avoid wedging the hardware
|
|
*/
|
|
if (!ictx->dev_present_intf0)
|
|
goto out;
|
|
|
|
switch (urb->status) {
|
|
case -ENOENT: /* usbcore unlink successful! */
|
|
return;
|
|
|
|
case -ESHUTDOWN: /* transport endpoint was shut down */
|
|
break;
|
|
|
|
case 0:
|
|
imon_incoming_packet(ictx, urb, intfnum);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
|
|
__func__, urb->status);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
|
|
}
|
|
|
|
static void usb_rx_callback_intf1(struct urb *urb)
|
|
{
|
|
struct imon_context *ictx;
|
|
int intfnum = 1;
|
|
|
|
if (!urb)
|
|
return;
|
|
|
|
ictx = (struct imon_context *)urb->context;
|
|
if (!ictx)
|
|
return;
|
|
|
|
/*
|
|
* if we get a callback before we're done configuring the hardware, we
|
|
* can't yet process the data, as there's nowhere to send it, but we
|
|
* still need to submit a new rx URB to avoid wedging the hardware
|
|
*/
|
|
if (!ictx->dev_present_intf1)
|
|
goto out;
|
|
|
|
switch (urb->status) {
|
|
case -ENOENT: /* usbcore unlink successful! */
|
|
return;
|
|
|
|
case -ESHUTDOWN: /* transport endpoint was shut down */
|
|
break;
|
|
|
|
case 0:
|
|
imon_incoming_packet(ictx, urb, intfnum);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
|
|
__func__, urb->status);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
|
|
}
|
|
|
|
/*
|
|
* The 0x15c2:0xffdc device ID was used for umpteen different imon
|
|
* devices, and all of them constantly spew interrupts, even when there
|
|
* is no actual data to report. However, byte 6 of this buffer looks like
|
|
* its unique across device variants, so we're trying to key off that to
|
|
* figure out which display type (if any) and what IR protocol the device
|
|
* actually supports. These devices have their IR protocol hard-coded into
|
|
* their firmware, they can't be changed on the fly like the newer hardware.
|
|
*/
|
|
static void imon_get_ffdc_type(struct imon_context *ictx)
|
|
{
|
|
u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
|
|
u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
|
|
u64 allowed_protos = RC_PROTO_BIT_IMON;
|
|
|
|
switch (ffdc_cfg_byte) {
|
|
/* iMON Knob, no display, iMON IR + vol knob */
|
|
case 0x21:
|
|
dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
|
|
ictx->display_supported = false;
|
|
break;
|
|
/* iMON 2.4G LT (usb stick), no display, iMON RF */
|
|
case 0x4e:
|
|
dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
|
|
ictx->display_supported = false;
|
|
ictx->rf_device = true;
|
|
break;
|
|
/* iMON VFD, no IR (does have vol knob tho) */
|
|
case 0x35:
|
|
dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
break;
|
|
/* iMON VFD, iMON IR */
|
|
case 0x24:
|
|
case 0x30:
|
|
case 0x85:
|
|
dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
break;
|
|
/* iMON VFD, MCE IR */
|
|
case 0x46:
|
|
case 0x9e:
|
|
dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
allowed_protos = RC_PROTO_BIT_RC6_MCE;
|
|
break;
|
|
/* iMON VFD, iMON or MCE IR */
|
|
case 0x7e:
|
|
dev_info(ictx->dev, "0xffdc iMON VFD, iMON or MCE IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
allowed_protos |= RC_PROTO_BIT_RC6_MCE;
|
|
break;
|
|
/* iMON LCD, MCE IR */
|
|
case 0x9f:
|
|
dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_LCD;
|
|
allowed_protos = RC_PROTO_BIT_RC6_MCE;
|
|
break;
|
|
/* no display, iMON IR */
|
|
case 0x26:
|
|
dev_info(ictx->dev, "0xffdc iMON Inside, iMON IR");
|
|
ictx->display_supported = false;
|
|
break;
|
|
/* Soundgraph iMON UltraBay */
|
|
case 0x98:
|
|
dev_info(ictx->dev, "0xffdc iMON UltraBay, LCD + IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_LCD;
|
|
allowed_protos = RC_PROTO_BIT_IMON | RC_PROTO_BIT_RC6_MCE;
|
|
ictx->dev_descr = &ultrabay_table;
|
|
break;
|
|
|
|
default:
|
|
dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD and iMON IR");
|
|
detected_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
/*
|
|
* We don't know which one it is, allow user to set the
|
|
* RC6 one from userspace if IMON wasn't correct.
|
|
*/
|
|
allowed_protos |= RC_PROTO_BIT_RC6_MCE;
|
|
break;
|
|
}
|
|
|
|
printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
|
|
|
|
ictx->display_type = detected_display_type;
|
|
ictx->rc_proto = allowed_protos;
|
|
}
|
|
|
|
static void imon_set_display_type(struct imon_context *ictx)
|
|
{
|
|
u8 configured_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
|
|
/*
|
|
* Try to auto-detect the type of display if the user hasn't set
|
|
* it by hand via the display_type modparam. Default is VFD.
|
|
*/
|
|
|
|
if (display_type == IMON_DISPLAY_TYPE_AUTO) {
|
|
switch (ictx->product) {
|
|
case 0xffdc:
|
|
/* set in imon_get_ffdc_type() */
|
|
configured_display_type = ictx->display_type;
|
|
break;
|
|
case 0x0034:
|
|
case 0x0035:
|
|
configured_display_type = IMON_DISPLAY_TYPE_VGA;
|
|
break;
|
|
case 0x0038:
|
|
case 0x0039:
|
|
case 0x0045:
|
|
configured_display_type = IMON_DISPLAY_TYPE_LCD;
|
|
break;
|
|
case 0x003c:
|
|
case 0x0041:
|
|
case 0x0042:
|
|
case 0x0043:
|
|
configured_display_type = IMON_DISPLAY_TYPE_NONE;
|
|
ictx->display_supported = false;
|
|
break;
|
|
case 0x0036:
|
|
case 0x0044:
|
|
default:
|
|
configured_display_type = IMON_DISPLAY_TYPE_VFD;
|
|
break;
|
|
}
|
|
} else {
|
|
configured_display_type = display_type;
|
|
if (display_type == IMON_DISPLAY_TYPE_NONE)
|
|
ictx->display_supported = false;
|
|
else
|
|
ictx->display_supported = true;
|
|
dev_info(ictx->dev, "%s: overriding display type to %d via modparam\n",
|
|
__func__, display_type);
|
|
}
|
|
|
|
ictx->display_type = configured_display_type;
|
|
}
|
|
|
|
static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
|
|
{
|
|
struct rc_dev *rdev;
|
|
int ret;
|
|
static const unsigned char fp_packet[] = {
|
|
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88 };
|
|
|
|
rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
|
|
if (!rdev) {
|
|
dev_err(ictx->dev, "remote control dev allocation failed\n");
|
|
goto out;
|
|
}
|
|
|
|
snprintf(ictx->name_rdev, sizeof(ictx->name_rdev),
|
|
"iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
|
|
usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev,
|
|
sizeof(ictx->phys_rdev));
|
|
strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
|
|
|
|
rdev->device_name = ictx->name_rdev;
|
|
rdev->input_phys = ictx->phys_rdev;
|
|
usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id);
|
|
rdev->dev.parent = ictx->dev;
|
|
|
|
rdev->priv = ictx;
|
|
/* iMON PAD or MCE */
|
|
rdev->allowed_protocols = RC_PROTO_BIT_IMON | RC_PROTO_BIT_RC6_MCE;
|
|
rdev->change_protocol = imon_ir_change_protocol;
|
|
rdev->driver_name = MOD_NAME;
|
|
|
|
/* Enable front-panel buttons and/or knobs */
|
|
memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
|
|
ret = send_packet(ictx);
|
|
/* Not fatal, but warn about it */
|
|
if (ret)
|
|
dev_info(ictx->dev, "panel buttons/knobs setup failed\n");
|
|
|
|
if (ictx->product == 0xffdc) {
|
|
imon_get_ffdc_type(ictx);
|
|
rdev->allowed_protocols = ictx->rc_proto;
|
|
}
|
|
|
|
imon_set_display_type(ictx);
|
|
|
|
if (ictx->rc_proto == RC_PROTO_BIT_RC6_MCE)
|
|
rdev->map_name = RC_MAP_IMON_MCE;
|
|
else
|
|
rdev->map_name = RC_MAP_IMON_PAD;
|
|
|
|
ret = rc_register_device(rdev);
|
|
if (ret < 0) {
|
|
dev_err(ictx->dev, "remote input dev register failed\n");
|
|
goto out;
|
|
}
|
|
|
|
return rdev;
|
|
|
|
out:
|
|
rc_free_device(rdev);
|
|
return NULL;
|
|
}
|
|
|
|
static struct input_dev *imon_init_idev(struct imon_context *ictx)
|
|
{
|
|
const struct imon_panel_key_table *key_table;
|
|
struct input_dev *idev;
|
|
int ret, i;
|
|
|
|
key_table = ictx->dev_descr->key_table;
|
|
|
|
idev = input_allocate_device();
|
|
if (!idev)
|
|
goto out;
|
|
|
|
snprintf(ictx->name_idev, sizeof(ictx->name_idev),
|
|
"iMON Panel, Knob and Mouse(%04x:%04x)",
|
|
ictx->vendor, ictx->product);
|
|
idev->name = ictx->name_idev;
|
|
|
|
usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
|
|
sizeof(ictx->phys_idev));
|
|
strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev));
|
|
idev->phys = ictx->phys_idev;
|
|
|
|
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
|
|
|
|
idev->keybit[BIT_WORD(BTN_MOUSE)] =
|
|
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
|
|
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
|
|
BIT_MASK(REL_WHEEL);
|
|
|
|
/* panel and/or knob code support */
|
|
for (i = 0; key_table[i].hw_code != 0; i++) {
|
|
u32 kc = key_table[i].keycode;
|
|
__set_bit(kc, idev->keybit);
|
|
}
|
|
|
|
usb_to_input_id(ictx->usbdev_intf0, &idev->id);
|
|
idev->dev.parent = ictx->dev;
|
|
input_set_drvdata(idev, ictx);
|
|
|
|
ret = input_register_device(idev);
|
|
if (ret < 0) {
|
|
dev_err(ictx->dev, "input dev register failed\n");
|
|
goto out;
|
|
}
|
|
|
|
return idev;
|
|
|
|
out:
|
|
input_free_device(idev);
|
|
return NULL;
|
|
}
|
|
|
|
static struct input_dev *imon_init_touch(struct imon_context *ictx)
|
|
{
|
|
struct input_dev *touch;
|
|
int ret;
|
|
|
|
touch = input_allocate_device();
|
|
if (!touch)
|
|
goto touch_alloc_failed;
|
|
|
|
snprintf(ictx->name_touch, sizeof(ictx->name_touch),
|
|
"iMON USB Touchscreen (%04x:%04x)",
|
|
ictx->vendor, ictx->product);
|
|
touch->name = ictx->name_touch;
|
|
|
|
usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
|
|
sizeof(ictx->phys_touch));
|
|
strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch));
|
|
touch->phys = ictx->phys_touch;
|
|
|
|
touch->evbit[0] =
|
|
BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
touch->keybit[BIT_WORD(BTN_TOUCH)] =
|
|
BIT_MASK(BTN_TOUCH);
|
|
input_set_abs_params(touch, ABS_X,
|
|
0x00, 0xfff, 0, 0);
|
|
input_set_abs_params(touch, ABS_Y,
|
|
0x00, 0xfff, 0, 0);
|
|
|
|
input_set_drvdata(touch, ictx);
|
|
|
|
usb_to_input_id(ictx->usbdev_intf1, &touch->id);
|
|
touch->dev.parent = ictx->dev;
|
|
ret = input_register_device(touch);
|
|
if (ret < 0) {
|
|
dev_info(ictx->dev, "touchscreen input dev register failed\n");
|
|
goto touch_register_failed;
|
|
}
|
|
|
|
return touch;
|
|
|
|
touch_register_failed:
|
|
input_free_device(touch);
|
|
|
|
touch_alloc_failed:
|
|
return NULL;
|
|
}
|
|
|
|
static bool imon_find_endpoints(struct imon_context *ictx,
|
|
struct usb_host_interface *iface_desc)
|
|
{
|
|
struct usb_endpoint_descriptor *ep;
|
|
struct usb_endpoint_descriptor *rx_endpoint = NULL;
|
|
struct usb_endpoint_descriptor *tx_endpoint = NULL;
|
|
int ifnum = iface_desc->desc.bInterfaceNumber;
|
|
int num_endpts = iface_desc->desc.bNumEndpoints;
|
|
int i, ep_dir, ep_type;
|
|
bool ir_ep_found = false;
|
|
bool display_ep_found = false;
|
|
bool tx_control = false;
|
|
|
|
/*
|
|
* Scan the endpoint list and set:
|
|
* first input endpoint = IR endpoint
|
|
* first output endpoint = display endpoint
|
|
*/
|
|
for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
|
|
ep = &iface_desc->endpoint[i].desc;
|
|
ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
|
|
ep_type = usb_endpoint_type(ep);
|
|
|
|
if (!ir_ep_found && ep_dir == USB_DIR_IN &&
|
|
ep_type == USB_ENDPOINT_XFER_INT) {
|
|
|
|
rx_endpoint = ep;
|
|
ir_ep_found = true;
|
|
dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
|
|
|
|
} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
|
|
ep_type == USB_ENDPOINT_XFER_INT) {
|
|
tx_endpoint = ep;
|
|
display_ep_found = true;
|
|
dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
|
|
}
|
|
}
|
|
|
|
if (ifnum == 0) {
|
|
ictx->rx_endpoint_intf0 = rx_endpoint;
|
|
/*
|
|
* tx is used to send characters to lcd/vfd, associate RF
|
|
* remotes, set IR protocol, and maybe more...
|
|
*/
|
|
ictx->tx_endpoint = tx_endpoint;
|
|
} else {
|
|
ictx->rx_endpoint_intf1 = rx_endpoint;
|
|
}
|
|
|
|
/*
|
|
* If we didn't find a display endpoint, this is probably one of the
|
|
* newer iMON devices that use control urb instead of interrupt
|
|
*/
|
|
if (!display_ep_found) {
|
|
tx_control = true;
|
|
display_ep_found = true;
|
|
dev_dbg(ictx->dev, "%s: device uses control endpoint, not interface OUT endpoint\n",
|
|
__func__);
|
|
}
|
|
|
|
/*
|
|
* Some iMON receivers have no display. Unfortunately, it seems
|
|
* that SoundGraph recycles device IDs between devices both with
|
|
* and without... :\
|
|
*/
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
|
|
display_ep_found = false;
|
|
dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* iMON Touch devices have a VGA touchscreen, but no "display", as
|
|
* that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
|
|
*/
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
|
|
display_ep_found = false;
|
|
dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
|
|
}
|
|
|
|
/* Input endpoint is mandatory */
|
|
if (!ir_ep_found)
|
|
pr_err("no valid input (IR) endpoint found\n");
|
|
|
|
ictx->tx_control = tx_control;
|
|
|
|
if (display_ep_found)
|
|
ictx->display_supported = true;
|
|
|
|
return ir_ep_found;
|
|
|
|
}
|
|
|
|
static struct imon_context *imon_init_intf0(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct imon_context *ictx;
|
|
struct urb *rx_urb;
|
|
struct urb *tx_urb;
|
|
struct device *dev = &intf->dev;
|
|
struct usb_host_interface *iface_desc;
|
|
int ret = -ENOMEM;
|
|
|
|
ictx = kzalloc(sizeof(*ictx), GFP_KERNEL);
|
|
if (!ictx)
|
|
goto exit;
|
|
|
|
rx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!rx_urb)
|
|
goto rx_urb_alloc_failed;
|
|
tx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!tx_urb)
|
|
goto tx_urb_alloc_failed;
|
|
|
|
mutex_init(&ictx->lock);
|
|
spin_lock_init(&ictx->kc_lock);
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
ictx->dev = dev;
|
|
ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
|
|
ictx->rx_urb_intf0 = rx_urb;
|
|
ictx->tx_urb = tx_urb;
|
|
ictx->rf_device = false;
|
|
|
|
init_completion(&ictx->tx.finished);
|
|
|
|
ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
|
|
ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
|
|
|
|
/* save drive info for later accessing the panel/knob key table */
|
|
ictx->dev_descr = (struct imon_usb_dev_descr *)id->driver_info;
|
|
/* default send_packet delay is 5ms but some devices need more */
|
|
ictx->send_packet_delay = ictx->dev_descr->flags &
|
|
IMON_NEED_20MS_PKT_DELAY ? 20 : 5;
|
|
|
|
ret = -ENODEV;
|
|
iface_desc = intf->cur_altsetting;
|
|
if (!imon_find_endpoints(ictx, iface_desc)) {
|
|
goto find_endpoint_failed;
|
|
}
|
|
|
|
usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
|
|
usb_rcvintpipe(ictx->usbdev_intf0,
|
|
ictx->rx_endpoint_intf0->bEndpointAddress),
|
|
ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
|
|
usb_rx_callback_intf0, ictx,
|
|
ictx->rx_endpoint_intf0->bInterval);
|
|
|
|
ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
|
|
if (ret) {
|
|
pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);
|
|
goto urb_submit_failed;
|
|
}
|
|
|
|
ictx->idev = imon_init_idev(ictx);
|
|
if (!ictx->idev) {
|
|
dev_err(dev, "%s: input device setup failed\n", __func__);
|
|
goto idev_setup_failed;
|
|
}
|
|
|
|
ictx->rdev = imon_init_rdev(ictx);
|
|
if (!ictx->rdev) {
|
|
dev_err(dev, "%s: rc device setup failed\n", __func__);
|
|
goto rdev_setup_failed;
|
|
}
|
|
|
|
ictx->dev_present_intf0 = true;
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
return ictx;
|
|
|
|
rdev_setup_failed:
|
|
input_unregister_device(ictx->idev);
|
|
idev_setup_failed:
|
|
usb_kill_urb(ictx->rx_urb_intf0);
|
|
urb_submit_failed:
|
|
find_endpoint_failed:
|
|
usb_put_dev(ictx->usbdev_intf0);
|
|
mutex_unlock(&ictx->lock);
|
|
usb_free_urb(tx_urb);
|
|
tx_urb_alloc_failed:
|
|
usb_free_urb(rx_urb);
|
|
rx_urb_alloc_failed:
|
|
kfree(ictx);
|
|
exit:
|
|
dev_err(dev, "unable to initialize intf0, err %d\n", ret);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct imon_context *imon_init_intf1(struct usb_interface *intf,
|
|
struct imon_context *ictx)
|
|
{
|
|
struct urb *rx_urb;
|
|
struct usb_host_interface *iface_desc;
|
|
int ret = -ENOMEM;
|
|
|
|
rx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!rx_urb)
|
|
goto rx_urb_alloc_failed;
|
|
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
|
|
timer_setup(&ictx->ttimer, imon_touch_display_timeout, 0);
|
|
}
|
|
|
|
ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
|
|
ictx->rx_urb_intf1 = rx_urb;
|
|
|
|
ret = -ENODEV;
|
|
iface_desc = intf->cur_altsetting;
|
|
if (!imon_find_endpoints(ictx, iface_desc))
|
|
goto find_endpoint_failed;
|
|
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
|
|
ictx->touch = imon_init_touch(ictx);
|
|
if (!ictx->touch)
|
|
goto touch_setup_failed;
|
|
} else
|
|
ictx->touch = NULL;
|
|
|
|
usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
|
|
usb_rcvintpipe(ictx->usbdev_intf1,
|
|
ictx->rx_endpoint_intf1->bEndpointAddress),
|
|
ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
|
|
usb_rx_callback_intf1, ictx,
|
|
ictx->rx_endpoint_intf1->bInterval);
|
|
|
|
ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
|
|
|
|
if (ret) {
|
|
pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);
|
|
goto urb_submit_failed;
|
|
}
|
|
|
|
ictx->dev_present_intf1 = true;
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
return ictx;
|
|
|
|
urb_submit_failed:
|
|
if (ictx->touch)
|
|
input_unregister_device(ictx->touch);
|
|
touch_setup_failed:
|
|
find_endpoint_failed:
|
|
usb_put_dev(ictx->usbdev_intf1);
|
|
mutex_unlock(&ictx->lock);
|
|
usb_free_urb(rx_urb);
|
|
rx_urb_alloc_failed:
|
|
dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void imon_init_display(struct imon_context *ictx,
|
|
struct usb_interface *intf)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
|
|
|
|
/* set up sysfs entry for built-in clock */
|
|
ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
|
|
if (ret)
|
|
dev_err(ictx->dev, "Could not create display sysfs entries(%d)",
|
|
ret);
|
|
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
|
|
ret = usb_register_dev(intf, &imon_lcd_class);
|
|
else
|
|
ret = usb_register_dev(intf, &imon_vfd_class);
|
|
if (ret)
|
|
/* Not a fatal error, so ignore */
|
|
dev_info(ictx->dev, "could not get a minor number for display\n");
|
|
|
|
}
|
|
|
|
/*
|
|
* Callback function for USB core API: Probe
|
|
*/
|
|
static int imon_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *usbdev = NULL;
|
|
struct usb_host_interface *iface_desc = NULL;
|
|
struct usb_interface *first_if;
|
|
struct device *dev = &interface->dev;
|
|
int ifnum, sysfs_err;
|
|
int ret = 0;
|
|
struct imon_context *ictx = NULL;
|
|
struct imon_context *first_if_ctx = NULL;
|
|
u16 vendor, product;
|
|
|
|
usbdev = usb_get_dev(interface_to_usbdev(interface));
|
|
iface_desc = interface->cur_altsetting;
|
|
ifnum = iface_desc->desc.bInterfaceNumber;
|
|
vendor = le16_to_cpu(usbdev->descriptor.idVendor);
|
|
product = le16_to_cpu(usbdev->descriptor.idProduct);
|
|
|
|
dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
|
|
__func__, vendor, product, ifnum);
|
|
|
|
/* prevent races probing devices w/multiple interfaces */
|
|
mutex_lock(&driver_lock);
|
|
|
|
first_if = usb_ifnum_to_if(usbdev, 0);
|
|
if (!first_if) {
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
first_if_ctx = usb_get_intfdata(first_if);
|
|
|
|
if (ifnum == 0) {
|
|
ictx = imon_init_intf0(interface, id);
|
|
if (!ictx) {
|
|
pr_err("failed to initialize context!\n");
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
} else {
|
|
/* this is the secondary interface on the device */
|
|
|
|
/* fail early if first intf failed to register */
|
|
if (!first_if_ctx) {
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
ictx = imon_init_intf1(interface, first_if_ctx);
|
|
if (!ictx) {
|
|
pr_err("failed to attach to context!\n");
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
}
|
|
|
|
usb_set_intfdata(interface, ictx);
|
|
|
|
if (ifnum == 0) {
|
|
mutex_lock(&ictx->lock);
|
|
|
|
if (product == 0xffdc && ictx->rf_device) {
|
|
sysfs_err = sysfs_create_group(&interface->dev.kobj,
|
|
&imon_rf_attr_group);
|
|
if (sysfs_err)
|
|
pr_err("Could not create RF sysfs entries(%d)\n",
|
|
sysfs_err);
|
|
}
|
|
|
|
if (ictx->display_supported)
|
|
imon_init_display(ictx, interface);
|
|
|
|
mutex_unlock(&ictx->lock);
|
|
}
|
|
|
|
dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n",
|
|
vendor, product, ifnum,
|
|
usbdev->bus->busnum, usbdev->devnum);
|
|
|
|
mutex_unlock(&driver_lock);
|
|
usb_put_dev(usbdev);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
mutex_unlock(&driver_lock);
|
|
usb_put_dev(usbdev);
|
|
dev_err(dev, "unable to register, err %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Callback function for USB core API: disconnect
|
|
*/
|
|
static void imon_disconnect(struct usb_interface *interface)
|
|
{
|
|
struct imon_context *ictx;
|
|
struct device *dev;
|
|
int ifnum;
|
|
|
|
/* prevent races with multi-interface device probing and display_open */
|
|
mutex_lock(&driver_lock);
|
|
|
|
ictx = usb_get_intfdata(interface);
|
|
dev = ictx->dev;
|
|
ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
|
|
|
|
/*
|
|
* sysfs_remove_group is safe to call even if sysfs_create_group
|
|
* hasn't been called
|
|
*/
|
|
sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group);
|
|
sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group);
|
|
|
|
usb_set_intfdata(interface, NULL);
|
|
|
|
/* Abort ongoing write */
|
|
if (ictx->tx.busy) {
|
|
usb_kill_urb(ictx->tx_urb);
|
|
complete(&ictx->tx.finished);
|
|
}
|
|
|
|
if (ifnum == 0) {
|
|
ictx->dev_present_intf0 = false;
|
|
usb_kill_urb(ictx->rx_urb_intf0);
|
|
usb_put_dev(ictx->usbdev_intf0);
|
|
input_unregister_device(ictx->idev);
|
|
rc_unregister_device(ictx->rdev);
|
|
if (ictx->display_supported) {
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
|
|
usb_deregister_dev(interface, &imon_lcd_class);
|
|
else if (ictx->display_type == IMON_DISPLAY_TYPE_VFD)
|
|
usb_deregister_dev(interface, &imon_vfd_class);
|
|
}
|
|
} else {
|
|
ictx->dev_present_intf1 = false;
|
|
usb_kill_urb(ictx->rx_urb_intf1);
|
|
usb_put_dev(ictx->usbdev_intf1);
|
|
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
|
|
input_unregister_device(ictx->touch);
|
|
del_timer_sync(&ictx->ttimer);
|
|
}
|
|
}
|
|
|
|
if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1)
|
|
free_imon_context(ictx);
|
|
|
|
mutex_unlock(&driver_lock);
|
|
|
|
dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
|
|
__func__, ifnum);
|
|
}
|
|
|
|
static int imon_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct imon_context *ictx = usb_get_intfdata(intf);
|
|
int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
|
|
|
|
if (ifnum == 0)
|
|
usb_kill_urb(ictx->rx_urb_intf0);
|
|
else
|
|
usb_kill_urb(ictx->rx_urb_intf1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imon_resume(struct usb_interface *intf)
|
|
{
|
|
int rc = 0;
|
|
struct imon_context *ictx = usb_get_intfdata(intf);
|
|
int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
|
|
|
|
if (ifnum == 0) {
|
|
usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
|
|
usb_rcvintpipe(ictx->usbdev_intf0,
|
|
ictx->rx_endpoint_intf0->bEndpointAddress),
|
|
ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
|
|
usb_rx_callback_intf0, ictx,
|
|
ictx->rx_endpoint_intf0->bInterval);
|
|
|
|
rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
|
|
|
|
} else {
|
|
usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
|
|
usb_rcvintpipe(ictx->usbdev_intf1,
|
|
ictx->rx_endpoint_intf1->bEndpointAddress),
|
|
ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
|
|
usb_rx_callback_intf1, ictx,
|
|
ictx->rx_endpoint_intf1->bInterval);
|
|
|
|
rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
module_usb_driver(imon_driver);
|