korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-26 05:34:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
43381eaf07
linux/drivers/ieee1394/sbp2.h
Stefan Richter 35bdddb83f sbp2: variable status FIFO address (fix login timeout) 
Let the ieee1394 core select a suitable 1394 address range for sbp2's
status FIFO instead of using a fixed range. Since the core only selects
addresses which are guaranteed to be out of the "physical range" as per
OHCI 1.1, this patch also fixes an old bug:

OHCI controllers which implement a writeable PhysicalUpperBound register
included sbp2's status FIFO in the physical range. That way sbp2 was
never notified of a succesful login and always failed after timeout.
Affected OHCI host adapters include ALi and Fujitsu controllers.

As another side effect of this patch, the status FIFO is no longer
located in a range for which OHCI chips perform "posted writes". Each
status write now requires a response subaction. But since large data
transfers involve only few status writes, there is no measurable
decrease of I/O throughput. What's more, the status FIFO is now safe
from potential host bus errors. Nevertheless, posted writes could be
re-enabled by extensions to the ARM features of the 1394 stack.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)
2006-02-23 00:28:52 -05:00

409 lines
13 KiB
C
Raw Blame History

/*
* sbp2.h - Defines and prototypes for sbp2.c
*
* Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
* jamesg@filanet.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef SBP2_H
#define SBP2_H
#define SBP2_DEVICE_NAME "sbp2"
/*
* SBP2 specific structures and defines
*/
#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
#define ORB_DIRECTION_READ_FROM_MEDIA 0x1
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
volatile u32 next_ORB_lo;
u32 data_descriptor_hi;
u32 data_descriptor_lo;
u32 misc;
u8 cdb[12];
};
#define SBP2_LOGIN_REQUEST 0x0
#define SBP2_QUERY_LOGINS_REQUEST 0x1
#define SBP2_RECONNECT_REQUEST 0x3
#define SBP2_SET_PASSWORD_REQUEST 0x4
#define SBP2_LOGOUT_REQUEST 0x7
#define SBP2_ABORT_TASK_REQUEST 0xb
#define SBP2_ABORT_TASK_SET 0xc
#define SBP2_LOGICAL_UNIT_RESET 0xe
#define SBP2_TARGET_RESET_REQUEST 0xf
#define ORB_SET_LUN(value) (value & 0xffff)
#define ORB_SET_FUNCTION(value) ((value & 0xf) << 16)
#define ORB_SET_RECONNECT(value) ((value & 0xf) << 20)
#define ORB_SET_EXCLUSIVE(value) ((value & 0x1) << 28)
#define ORB_SET_LOGIN_RESP_LENGTH(value) (value & 0xffff)
#define ORB_SET_PASSWD_LENGTH(value) ((value & 0xffff) << 16)
struct sbp2_login_orb {
u32 password_hi;
u32 password_lo;
u32 login_response_hi;
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
#define RESPONSE_GET_LENGTH(value) ((value >> 16) & 0xffff)
#define RESPONSE_GET_RECONNECT_HOLD(value) (value & 0xffff)
struct sbp2_login_response {
u32 length_login_ID;
u32 command_block_agent_hi;
u32 command_block_agent_lo;
u32 reconnect_hold;
};
#define ORB_SET_LOGIN_ID(value) (value & 0xffff)
#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
struct sbp2_query_logins_orb {
u32 reserved1;
u32 reserved2;
u32 query_response_hi;
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
#define RESPONSE_GET_ACTIVE_LOGINS(value) ((RESPONSE_GET_LENGTH(value) - 4) / 12)
struct sbp2_query_logins_response {
u32 length_max_logins;
u32 misc_IDs;
u32 initiator_misc_hi;
u32 initiator_misc_lo;
};
struct sbp2_reconnect_orb {
u32 reserved1;
u32 reserved2;
u32 reserved3;
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
struct sbp2_logout_orb {
u32 reserved1;
u32 reserved2;
u32 reserved3;
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
#define PAGE_TABLE_SET_SEGMENT_LENGTH(value) ((value & 0xffff) << 16)
struct sbp2_unrestricted_page_table {
u32 length_segment_base_hi;
u32 segment_base_lo;
};
#define RESP_STATUS_REQUEST_COMPLETE 0x0
#define RESP_STATUS_TRANSPORT_FAILURE 0x1
#define RESP_STATUS_ILLEGAL_REQUEST 0x2
#define RESP_STATUS_VENDOR_DEPENDENT 0x3
#define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0
#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1
#define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2
#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3
#define SBP2_STATUS_ACCESS_DENIED 0x4
#define SBP2_STATUS_LU_NOT_SUPPORTED 0x5
#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6
#define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8
#define SBP2_STATUS_FUNCTION_REJECTED 0x9
#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa
#define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb
#define SBP2_STATUS_REQUEST_ABORTED 0xc
#define SBP2_STATUS_UNSPECIFIED_ERROR 0xff
#define SFMT_CURRENT_ERROR 0x0
#define SFMT_DEFERRED_ERROR 0x1
#define SFMT_VENDOR_DEPENDENT_STATUS 0x3
#define SBP2_SCSI_STATUS_GOOD 0x0
#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
#define SBP2_SCSI_STATUS_CONDITION_MET 0x4
#define SBP2_SCSI_STATUS_BUSY 0x8
#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
#define STATUS_GET_ORB_OFFSET_HI(value) (value & 0xffff)
#define STATUS_GET_SBP_STATUS(value) ((value >> 16) & 0xff)
#define STATUS_GET_LENGTH(value) ((value >> 24) & 0x7)
#define STATUS_GET_DEAD_BIT(value) ((value >> 27) & 0x1)
#define STATUS_GET_RESP(value) ((value >> 28) & 0x3)
#define STATUS_GET_SRC(value) ((value >> 30) & 0x3)
struct sbp2_status_block {
u32 ORB_offset_hi_misc;
u32 ORB_offset_lo;
u8 command_set_dependent[24];
};
/*
* Miscellaneous SBP2 related config rom defines
*/
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
#define SBP2_UNIT_SW_VERSION_KEY 0x13
#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
#define SBP2_COMMAND_SET_KEY 0x39
#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
#define SBP2_FIRMWARE_REVISION_KEY 0x3c
#define SBP2_AGENT_STATE_OFFSET 0x00ULL
#define SBP2_AGENT_RESET_OFFSET 0x04ULL
#define SBP2_ORB_POINTER_OFFSET 0x08ULL
#define SBP2_DOORBELL_OFFSET 0x10ULL
#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
#define SBP2_UNSOLICITED_STATUS_VALUE 0xf
#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
#define SBP2_BUSY_TIMEOUT_VALUE 0xf
#define SBP2_AGENT_RESET_DATA 0xf
/*
* Unit spec id and sw version entry for SBP-2 devices
*/
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
/*
* Other misc defines
*/
#define SBP2_128KB_BROKEN_FIRMWARE 0xa0b800
/*
* SCSI specific stuff
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
/* This is the two dma types we use for cmd_dma below */
enum cmd_dma_types {
CMD_DMA_NONE,
CMD_DMA_PAGE,
CMD_DMA_SINGLE
};
/*
* Encapsulates all the info necessary for an outstanding command.
*/
struct sbp2_command_info {
struct list_head list;
struct sbp2_command_orb command_orb ____cacheline_aligned;
dma_addr_t command_orb_dma ____cacheline_aligned;
struct scsi_cmnd *Current_SCpnt;
void (*Current_done)(struct scsi_cmnd *);
/* Also need s/g structure for each sbp2 command */
struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
dma_addr_t sge_dma ____cacheline_aligned;
void *sge_buffer;
dma_addr_t cmd_dma;
enum cmd_dma_types dma_type;
unsigned long dma_size;
int dma_dir;
};
/* A list of flags for detected oddities and brokeness. */
#define SBP2_BREAKAGE_128K_MAX_TRANSFER 0x1
#define SBP2_BREAKAGE_INQUIRY_HACK 0x2
struct sbp2scsi_host_info;
/*
* Information needed on a per scsi id basis (one for each sbp2 device)
*/
struct scsi_id_instance_data {
/*
* Various sbp2 specific structures
*/
struct sbp2_command_orb *last_orb;
dma_addr_t last_orb_dma;
struct sbp2_login_orb *login_orb;
dma_addr_t login_orb_dma;
struct sbp2_login_response *login_response;
dma_addr_t login_response_dma;
struct sbp2_query_logins_orb *query_logins_orb;
dma_addr_t query_logins_orb_dma;
struct sbp2_query_logins_response *query_logins_response;
dma_addr_t query_logins_response_dma;
struct sbp2_reconnect_orb *reconnect_orb;
dma_addr_t reconnect_orb_dma;
struct sbp2_logout_orb *logout_orb;
dma_addr_t logout_orb_dma;
struct sbp2_status_block status_block;
/*
* Stuff we need to know about the sbp2 device itself
*/
u64 sbp2_management_agent_addr;
u64 sbp2_command_block_agent_addr;
u32 speed_code;
u32 max_payload_size;
/*
* Values pulled from the device's unit directory
*/
u32 sbp2_command_set_spec_id;
u32 sbp2_command_set;
u32 sbp2_unit_characteristics;
u32 sbp2_lun;
u32 sbp2_firmware_revision;
/*
* Address for the device to write status blocks to
*/
u64 status_fifo_addr;
/*
* Variable used for logins, reconnects, logouts, query logins
*/
atomic_t sbp2_login_complete;
/*
* Pool of command orbs, so we can have more than overlapped command per id
*/
spinlock_t sbp2_command_orb_lock;
struct list_head sbp2_command_orb_inuse;
struct list_head sbp2_command_orb_completed;
struct list_head scsi_list;
/* Node entry, as retrieved from NodeMgr entries */
struct node_entry *ne;
struct unit_directory *ud;
/* A backlink to our host_info */
struct sbp2scsi_host_info *hi;
/* SCSI related pointers */
struct scsi_device *sdev;
struct Scsi_Host *scsi_host;
/* Device specific workarounds/brokeness */
u32 workarounds;
};
/* Sbp2 host data structure (one per IEEE1394 host) */
struct sbp2scsi_host_info {
struct hpsb_host *host; /* IEEE1394 host */
struct list_head scsi_ids; /* List of scsi ids on this host */
};
/*
* Function prototypes
*/
/*
* Various utility prototypes
*/
static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id);
static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id);
static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);
static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);
static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *Current_SCpnt,
void (*Current_done)(struct scsi_cmnd *));
static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command);
static int sbp2_start_device(struct scsi_id_instance_data *scsi_id);
static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id);
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,
u64 addr, size_t length, u16 flags);
static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,
u64 addr, size_t length, u16 flags);
#endif
/*
* SBP-2 protocol related prototypes
*/
static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id);
static int sbp2_login_device(struct scsi_id_instance_data *scsi_id);
static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id);
static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id);
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
quadlet_t *data, u64 addr, size_t length, u16 flags);
static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);
static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command);
static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *));
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt);
static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct unit_directory *ud);
static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);
static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id);
#endif /* SBP2_H */
Reference in New Issue View Git Blame Copy Permalink