linux/drivers/net/phy/sfp.h
Russell King (Oracle) dc18582211 net: sfp: add support for setting signalling rate
Add support to the SFP layer to allow phylink to set the signalling
rate for a SFP module. The rate given will be in units of kilo-baud
(1000 baud).

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-18 19:52:31 -07:00

46 lines
1.5 KiB
C

#ifndef SFP_H
#define SFP_H
#include <linux/ethtool.h>
#include <linux/sfp.h>
struct sfp;
struct sfp_quirk {
const char *vendor;
const char *part;
void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes,
unsigned long *interfaces);
void (*fixup)(struct sfp *sfp);
};
struct sfp_socket_ops {
void (*attach)(struct sfp *sfp);
void (*detach)(struct sfp *sfp);
void (*start)(struct sfp *sfp);
void (*stop)(struct sfp *sfp);
void (*set_signal_rate)(struct sfp *sfp, unsigned int rate_kbd);
int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo);
int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee,
u8 *data);
int (*module_eeprom_by_page)(struct sfp *sfp,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack);
};
int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev);
void sfp_remove_phy(struct sfp_bus *bus);
void sfp_link_up(struct sfp_bus *bus);
void sfp_link_down(struct sfp_bus *bus);
int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
const struct sfp_quirk *quirk);
void sfp_module_remove(struct sfp_bus *bus);
int sfp_module_start(struct sfp_bus *bus);
void sfp_module_stop(struct sfp_bus *bus);
int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
const struct sfp_socket_ops *ops);
void sfp_unregister_socket(struct sfp_bus *bus);
#endif