linux/drivers/gpu/drm/nouveau/nouveau_agp.c
Alexandre Courbot 420b946977 support for platform devices
Upcoming mobile Kepler GPUs (such as GK20A) use the platform bus instead
of PCI to which Nouveau is tightly dependent. This patch allows Nouveau
to handle platform devices by:

- abstracting PCI-dependent functions that were typically used for
  resource querying and page mapping,
- introducing a nv_device_is_pci() function that allows to make
  PCI-dependent code conditional,
- providing a nouveau_drm_platform_probe() function that takes a GPU
  platform device to be probed.

Core code as well as engine/subdev drivers are updated wherever possible
to make use of these functions. Some older drivers are too dependent on
PCI to be properly updated, but all newer code on which future chips may
depend should at least be runnable with platform devices.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:04 +10:00

199 lines
4.6 KiB
C

#include <linux/module.h>
#include <core/device.h>
#include "nouveau_drm.h"
#include "nouveau_agp.h"
#include "nouveau_reg.h"
#if __OS_HAS_AGP
MODULE_PARM_DESC(agpmode, "AGP mode (0 to disable AGP)");
static int nouveau_agpmode = -1;
module_param_named(agpmode, nouveau_agpmode, int, 0400);
struct nouveau_agpmode_quirk {
u16 hostbridge_vendor;
u16 hostbridge_device;
u16 chip_vendor;
u16 chip_device;
int mode;
};
static struct nouveau_agpmode_quirk nouveau_agpmode_quirk_list[] = {
/* VIA Apollo PRO133x / GeForce FX 5600 Ultra, max agpmode 2, fdo #20341 */
{ PCI_VENDOR_ID_VIA, 0x0691, PCI_VENDOR_ID_NVIDIA, 0x0311, 2 },
{},
};
static unsigned long
get_agp_mode(struct nouveau_drm *drm, const struct drm_agp_info *info)
{
struct nouveau_device *device = nv_device(drm->device);
struct nouveau_agpmode_quirk *quirk = nouveau_agpmode_quirk_list;
int agpmode = nouveau_agpmode;
unsigned long mode = info->mode;
/*
* FW seems to be broken on nv18, it makes the card lock up
* randomly.
*/
if (device->chipset == 0x18)
mode &= ~PCI_AGP_COMMAND_FW;
/*
* Go through the quirks list and adjust the agpmode accordingly.
*/
while (agpmode == -1 && quirk->hostbridge_vendor) {
if (info->id_vendor == quirk->hostbridge_vendor &&
info->id_device == quirk->hostbridge_device &&
device->pdev->vendor == quirk->chip_vendor &&
device->pdev->device == quirk->chip_device) {
agpmode = quirk->mode;
nv_info(device, "Forcing agp mode to %dX. Use agpmode to override.\n",
agpmode);
break;
}
++quirk;
}
/*
* AGP mode set in the command line.
*/
if (agpmode > 0) {
bool agpv3 = mode & 0x8;
int rate = agpv3 ? agpmode / 4 : agpmode;
mode = (mode & ~0x7) | (rate & 0x7);
}
return mode;
}
static bool
nouveau_agp_enabled(struct nouveau_drm *drm)
{
struct drm_device *dev = drm->dev;
if (!dev->pdev || !drm_pci_device_is_agp(dev) || !dev->agp)
return false;
if (drm->agp.stat == UNKNOWN) {
if (!nouveau_agpmode)
return false;
#ifdef __powerpc__
/* Disable AGP by default on all PowerPC machines for
* now -- At least some UniNorth-2 AGP bridges are
* known to be broken: DMA from the host to the card
* works just fine, but writeback from the card to the
* host goes straight to memory untranslated bypassing
* the GATT somehow, making them quite painful to deal
* with...
*/
if (nouveau_agpmode == -1)
return false;
#endif
return true;
}
return (drm->agp.stat == ENABLED);
}
#endif
void
nouveau_agp_reset(struct nouveau_drm *drm)
{
#if __OS_HAS_AGP
struct nouveau_device *device = nv_device(drm->device);
struct drm_device *dev = drm->dev;
u32 save[2];
int ret;
if (!nouveau_agp_enabled(drm))
return;
/* First of all, disable fast writes, otherwise if it's
* already enabled in the AGP bridge and we disable the card's
* AGP controller we might be locking ourselves out of it. */
if ((nv_rd32(device, NV04_PBUS_PCI_NV_19) |
dev->agp->mode) & PCI_AGP_COMMAND_FW) {
struct drm_agp_info info;
struct drm_agp_mode mode;
ret = drm_agp_info(dev, &info);
if (ret)
return;
mode.mode = get_agp_mode(drm, &info);
mode.mode &= ~PCI_AGP_COMMAND_FW;
ret = drm_agp_enable(dev, mode);
if (ret)
return;
}
/* clear busmaster bit, and disable AGP */
save[0] = nv_mask(device, NV04_PBUS_PCI_NV_1, 0x00000004, 0x00000000);
nv_wr32(device, NV04_PBUS_PCI_NV_19, 0);
/* reset PGRAPH, PFIFO and PTIMER */
save[1] = nv_mask(device, 0x000200, 0x00011100, 0x00000000);
nv_mask(device, 0x000200, 0x00011100, save[1]);
/* and restore bustmaster bit (gives effect of resetting AGP) */
nv_wr32(device, NV04_PBUS_PCI_NV_1, save[0]);
#endif
}
void
nouveau_agp_init(struct nouveau_drm *drm)
{
#if __OS_HAS_AGP
struct nouveau_device *device = nv_device(drm->device);
struct drm_device *dev = drm->dev;
struct drm_agp_info info;
struct drm_agp_mode mode;
int ret;
if (!nouveau_agp_enabled(drm))
return;
drm->agp.stat = DISABLE;
ret = drm_agp_acquire(dev);
if (ret) {
nv_error(device, "unable to acquire AGP: %d\n", ret);
return;
}
ret = drm_agp_info(dev, &info);
if (ret) {
nv_error(device, "unable to get AGP info: %d\n", ret);
return;
}
/* see agp.h for the AGPSTAT_* modes available */
mode.mode = get_agp_mode(drm, &info);
ret = drm_agp_enable(dev, mode);
if (ret) {
nv_error(device, "unable to enable AGP: %d\n", ret);
return;
}
drm->agp.stat = ENABLED;
drm->agp.base = info.aperture_base;
drm->agp.size = info.aperture_size;
#endif
}
void
nouveau_agp_fini(struct nouveau_drm *drm)
{
#if __OS_HAS_AGP
struct drm_device *dev = drm->dev;
if (dev->agp && dev->agp->acquired)
drm_agp_release(dev);
#endif
}