mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-01 08:04:22 +08:00
cae5851653
On AM62x, the watchdog is pet before the valid window is open. Fix
min_hw_heartbeat and accommodate a 2% + static offset safety margin.
The static offset accounts for max hardware error.
Remove the hack in the driver which shifts the open window boundary,
since it is no longer necessary due to the fix mentioned above.
cc: stable@vger.kernel.org
Fixes: 5527483f8f
("watchdog: rti-wdt: attach to running watchdog during probe")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
399 lines
9.6 KiB
C
399 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Watchdog driver for the K3 RTI module
|
|
*
|
|
* (c) Copyright 2019-2020 Texas Instruments Inc.
|
|
* All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/types.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define DEFAULT_HEARTBEAT 60
|
|
|
|
/* Max heartbeat is calculated at 32kHz source clock */
|
|
#define MAX_HEARTBEAT 1000
|
|
|
|
/* Timer register set definition */
|
|
#define RTIDWDCTRL 0x90
|
|
#define RTIDWDPRLD 0x94
|
|
#define RTIWDSTATUS 0x98
|
|
#define RTIWDKEY 0x9c
|
|
#define RTIDWDCNTR 0xa0
|
|
#define RTIWWDRXCTRL 0xa4
|
|
#define RTIWWDSIZECTRL 0xa8
|
|
|
|
#define RTIWWDRX_NMI 0xa
|
|
|
|
#define RTIWWDSIZE_50P 0x50
|
|
#define RTIWWDSIZE_25P 0x500
|
|
#define RTIWWDSIZE_12P5 0x5000
|
|
#define RTIWWDSIZE_6P25 0x50000
|
|
#define RTIWWDSIZE_3P125 0x500000
|
|
|
|
#define WDENABLE_KEY 0xa98559da
|
|
|
|
#define WDKEY_SEQ0 0xe51a
|
|
#define WDKEY_SEQ1 0xa35c
|
|
|
|
#define WDT_PRELOAD_SHIFT 13
|
|
|
|
#define WDT_PRELOAD_MAX 0xfff
|
|
|
|
#define DWDST BIT(1)
|
|
|
|
#define PON_REASON_SOF_NUM 0xBBBBCCCC
|
|
#define PON_REASON_MAGIC_NUM 0xDDDDDDDD
|
|
#define PON_REASON_EOF_NUM 0xCCCCBBBB
|
|
#define RESERVED_MEM_MIN_SIZE 12
|
|
|
|
#define MAX_HW_ERROR 250
|
|
|
|
static int heartbeat = DEFAULT_HEARTBEAT;
|
|
|
|
/*
|
|
* struct to hold data for each WDT device
|
|
* @base - base io address of WD device
|
|
* @freq - source clock frequency of WDT
|
|
* @wdd - hold watchdog device as is in WDT core
|
|
*/
|
|
struct rti_wdt_device {
|
|
void __iomem *base;
|
|
unsigned long freq;
|
|
struct watchdog_device wdd;
|
|
};
|
|
|
|
static int rti_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
u32 timer_margin;
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(wdd->parent);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* set timeout period */
|
|
timer_margin = (u64)wdd->timeout * wdt->freq;
|
|
timer_margin >>= WDT_PRELOAD_SHIFT;
|
|
if (timer_margin > WDT_PRELOAD_MAX)
|
|
timer_margin = WDT_PRELOAD_MAX;
|
|
writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD);
|
|
|
|
/*
|
|
* RTI only supports a windowed mode, where the watchdog can only
|
|
* be petted during the open window; not too early or not too late.
|
|
* The HW configuration options only allow for the open window size
|
|
* to be 50% or less than that; we obviouly want to configure the open
|
|
* window as large as possible so we select the 50% option.
|
|
*/
|
|
wdd->min_hw_heartbeat_ms = 520 * wdd->timeout + MAX_HW_ERROR;
|
|
|
|
/* Generate NMI when wdt expires */
|
|
writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
|
|
|
|
/* Open window size 50%; this is the largest window size available */
|
|
writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL);
|
|
|
|
readl_relaxed(wdt->base + RTIWWDSIZECTRL);
|
|
|
|
/* enable watchdog */
|
|
writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
/* put watchdog in service state */
|
|
writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY);
|
|
/* put watchdog in active state */
|
|
writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize)
|
|
{
|
|
/*
|
|
* RTI only supports a windowed mode, where the watchdog can only
|
|
* be petted during the open window; not too early or not too late.
|
|
* The HW configuration options only allow for the open window size
|
|
* to be 50% or less than that.
|
|
* To avoid any glitches, we accommodate 2% + max hardware error
|
|
* safety margin.
|
|
*/
|
|
switch (wsize) {
|
|
case RTIWWDSIZE_50P:
|
|
/* 50% open window => 52% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 520 * heartbeat + MAX_HW_ERROR;
|
|
break;
|
|
|
|
case RTIWWDSIZE_25P:
|
|
/* 25% open window => 77% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 770 * heartbeat + MAX_HW_ERROR;
|
|
break;
|
|
|
|
case RTIWWDSIZE_12P5:
|
|
/* 12.5% open window => 89.5% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 895 * heartbeat + MAX_HW_ERROR;
|
|
break;
|
|
|
|
case RTIWWDSIZE_6P25:
|
|
/* 6.5% open window => 95.5% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 955 * heartbeat + MAX_HW_ERROR;
|
|
break;
|
|
|
|
case RTIWWDSIZE_3P125:
|
|
/* 3.125% open window => 98.9% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 989 * heartbeat + MAX_HW_ERROR;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd)
|
|
{
|
|
u64 timer_counter;
|
|
u32 val;
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
/* if timeout has occurred then return 0 */
|
|
val = readl_relaxed(wdt->base + RTIWDSTATUS);
|
|
if (val & DWDST)
|
|
return 0;
|
|
|
|
timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR);
|
|
|
|
timer_counter *= 1000;
|
|
|
|
do_div(timer_counter, wdt->freq);
|
|
|
|
return timer_counter;
|
|
}
|
|
|
|
static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
{
|
|
return rti_wdt_get_timeleft_ms(wdd) / 1000;
|
|
}
|
|
|
|
static const struct watchdog_info rti_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING,
|
|
.identity = "K3 RTI Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops rti_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = rti_wdt_start,
|
|
.ping = rti_wdt_ping,
|
|
.get_timeleft = rti_wdt_get_timeleft,
|
|
};
|
|
|
|
static int rti_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
struct device *dev = &pdev->dev;
|
|
struct watchdog_device *wdd;
|
|
struct rti_wdt_device *wdt;
|
|
struct clk *clk;
|
|
u32 last_ping = 0;
|
|
struct device_node *node;
|
|
u32 reserved_mem_size;
|
|
struct resource res;
|
|
u32 *vaddr;
|
|
u64 paddr;
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
clk = clk_get(dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
|
|
|
|
wdt->freq = clk_get_rate(clk);
|
|
|
|
clk_put(clk);
|
|
|
|
if (!wdt->freq) {
|
|
dev_err(dev, "Failed to get fck rate.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0) {
|
|
pm_runtime_disable(&pdev->dev);
|
|
return dev_err_probe(dev, ret, "runtime pm failed\n");
|
|
}
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
|
|
wdd = &wdt->wdd;
|
|
wdd->info = &rti_wdt_info;
|
|
wdd->ops = &rti_wdt_ops;
|
|
wdd->min_timeout = 1;
|
|
wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) /
|
|
wdt->freq * 1000;
|
|
wdd->parent = dev;
|
|
|
|
watchdog_set_drvdata(wdd, wdt);
|
|
watchdog_set_nowayout(wdd, 1);
|
|
watchdog_set_restart_priority(wdd, 128);
|
|
|
|
wdt->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(wdt->base)) {
|
|
ret = PTR_ERR(wdt->base);
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) {
|
|
int preset_heartbeat;
|
|
u32 time_left_ms;
|
|
u64 heartbeat_ms;
|
|
u32 wsize;
|
|
|
|
set_bit(WDOG_HW_RUNNING, &wdd->status);
|
|
time_left_ms = rti_wdt_get_timeleft_ms(wdd);
|
|
heartbeat_ms = readl(wdt->base + RTIDWDPRLD);
|
|
heartbeat_ms <<= WDT_PRELOAD_SHIFT;
|
|
heartbeat_ms *= 1000;
|
|
do_div(heartbeat_ms, wdt->freq);
|
|
preset_heartbeat = heartbeat_ms + 500;
|
|
preset_heartbeat /= 1000;
|
|
if (preset_heartbeat != heartbeat)
|
|
dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n");
|
|
|
|
heartbeat = preset_heartbeat;
|
|
|
|
wsize = readl(wdt->base + RTIWWDSIZECTRL);
|
|
ret = rti_wdt_setup_hw_hb(wdd, wsize);
|
|
if (ret) {
|
|
dev_err(dev, "bad window size.\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
last_ping = heartbeat_ms - time_left_ms;
|
|
if (time_left_ms > heartbeat_ms) {
|
|
dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n");
|
|
last_ping = 0;
|
|
}
|
|
}
|
|
|
|
node = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
|
|
if (node) {
|
|
ret = of_address_to_resource(node, 0, &res);
|
|
if (ret) {
|
|
dev_err(dev, "No memory address assigned to the region.\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
/*
|
|
* If reserved memory is defined for watchdog reset cause.
|
|
* Readout the Power-on(PON) reason and pass to bootstatus.
|
|
*/
|
|
paddr = res.start;
|
|
reserved_mem_size = resource_size(&res);
|
|
if (reserved_mem_size < RESERVED_MEM_MIN_SIZE) {
|
|
dev_err(dev, "The size of reserved memory is too small.\n");
|
|
ret = -EINVAL;
|
|
goto err_iomap;
|
|
}
|
|
|
|
vaddr = memremap(paddr, reserved_mem_size, MEMREMAP_WB);
|
|
if (!vaddr) {
|
|
dev_err(dev, "Failed to map memory-region.\n");
|
|
ret = -ENOMEM;
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (vaddr[0] == PON_REASON_SOF_NUM &&
|
|
vaddr[1] == PON_REASON_MAGIC_NUM &&
|
|
vaddr[2] == PON_REASON_EOF_NUM) {
|
|
wdd->bootstatus |= WDIOF_CARDRESET;
|
|
}
|
|
memset(vaddr, 0, reserved_mem_size);
|
|
memunmap(vaddr);
|
|
}
|
|
|
|
watchdog_init_timeout(wdd, heartbeat, dev);
|
|
|
|
ret = watchdog_register_device(wdd);
|
|
if (ret) {
|
|
dev_err(dev, "cannot register watchdog device\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (last_ping)
|
|
watchdog_set_last_hw_keepalive(wdd, last_ping);
|
|
|
|
if (!watchdog_hw_running(wdd))
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
|
|
return 0;
|
|
|
|
err_iomap:
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rti_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
|
|
|
|
watchdog_unregister_device(&wdt->wdd);
|
|
|
|
if (!pm_runtime_suspended(&pdev->dev))
|
|
pm_runtime_put(&pdev->dev);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
static const struct of_device_id rti_wdt_of_match[] = {
|
|
{ .compatible = "ti,j7-rti-wdt", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rti_wdt_of_match);
|
|
|
|
static struct platform_driver rti_wdt_driver = {
|
|
.driver = {
|
|
.name = "rti-wdt",
|
|
.of_match_table = rti_wdt_of_match,
|
|
},
|
|
.probe = rti_wdt_probe,
|
|
.remove_new = rti_wdt_remove,
|
|
};
|
|
|
|
module_platform_driver(rti_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>");
|
|
MODULE_DESCRIPTION("K3 RTI Watchdog Driver");
|
|
|
|
module_param(heartbeat, int, 0);
|
|
MODULE_PARM_DESC(heartbeat,
|
|
"Watchdog heartbeat period in seconds from 1 to "
|
|
__MODULE_STRING(MAX_HEARTBEAT) ", default "
|
|
__MODULE_STRING(DEFAULT_HEARTBEAT));
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:rti-wdt");
|