mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 06:34:12 +08:00
3b465a1491
Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-35-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
543 lines
13 KiB
C
543 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* AMD am53c974 driver.
|
|
* Copyright (c) 2014 Hannes Reinecke, SUSE Linux GmbH
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "esp_scsi.h"
|
|
|
|
#define DRV_MODULE_NAME "am53c974"
|
|
#define DRV_MODULE_VERSION "1.00"
|
|
|
|
static bool am53c974_debug;
|
|
static bool am53c974_fenab = true;
|
|
|
|
#define esp_dma_log(f, a...) \
|
|
do { \
|
|
if (am53c974_debug) \
|
|
shost_printk(KERN_DEBUG, esp->host, f, ##a); \
|
|
} while (0)
|
|
|
|
#define ESP_DMA_CMD 0x10
|
|
#define ESP_DMA_STC 0x11
|
|
#define ESP_DMA_SPA 0x12
|
|
#define ESP_DMA_WBC 0x13
|
|
#define ESP_DMA_WAC 0x14
|
|
#define ESP_DMA_STATUS 0x15
|
|
#define ESP_DMA_SMDLA 0x16
|
|
#define ESP_DMA_WMAC 0x17
|
|
|
|
#define ESP_DMA_CMD_IDLE 0x00
|
|
#define ESP_DMA_CMD_BLAST 0x01
|
|
#define ESP_DMA_CMD_ABORT 0x02
|
|
#define ESP_DMA_CMD_START 0x03
|
|
#define ESP_DMA_CMD_MASK 0x03
|
|
#define ESP_DMA_CMD_DIAG 0x04
|
|
#define ESP_DMA_CMD_MDL 0x10
|
|
#define ESP_DMA_CMD_INTE_P 0x20
|
|
#define ESP_DMA_CMD_INTE_D 0x40
|
|
#define ESP_DMA_CMD_DIR 0x80
|
|
|
|
#define ESP_DMA_STAT_PWDN 0x01
|
|
#define ESP_DMA_STAT_ERROR 0x02
|
|
#define ESP_DMA_STAT_ABORT 0x04
|
|
#define ESP_DMA_STAT_DONE 0x08
|
|
#define ESP_DMA_STAT_SCSIINT 0x10
|
|
#define ESP_DMA_STAT_BCMPLT 0x20
|
|
|
|
/* EEPROM is accessed with 16-bit values */
|
|
#define DC390_EEPROM_READ 0x80
|
|
#define DC390_EEPROM_LEN 0x40
|
|
|
|
/*
|
|
* DC390 EEPROM
|
|
*
|
|
* 8 * 4 bytes of per-device options
|
|
* followed by HBA specific options
|
|
*/
|
|
|
|
/* Per-device options */
|
|
#define DC390_EE_MODE1 0x00
|
|
#define DC390_EE_SPEED 0x01
|
|
|
|
/* HBA-specific options */
|
|
#define DC390_EE_ADAPT_SCSI_ID 0x40
|
|
#define DC390_EE_MODE2 0x41
|
|
#define DC390_EE_DELAY 0x42
|
|
#define DC390_EE_TAG_CMD_NUM 0x43
|
|
|
|
#define DC390_EE_MODE1_PARITY_CHK 0x01
|
|
#define DC390_EE_MODE1_SYNC_NEGO 0x02
|
|
#define DC390_EE_MODE1_EN_DISC 0x04
|
|
#define DC390_EE_MODE1_SEND_START 0x08
|
|
#define DC390_EE_MODE1_TCQ 0x10
|
|
|
|
#define DC390_EE_MODE2_MORE_2DRV 0x01
|
|
#define DC390_EE_MODE2_GREATER_1G 0x02
|
|
#define DC390_EE_MODE2_RST_SCSI_BUS 0x04
|
|
#define DC390_EE_MODE2_ACTIVE_NEGATION 0x08
|
|
#define DC390_EE_MODE2_NO_SEEK 0x10
|
|
#define DC390_EE_MODE2_LUN_CHECK 0x20
|
|
|
|
struct pci_esp_priv {
|
|
struct esp *esp;
|
|
u8 dma_status;
|
|
};
|
|
|
|
static void pci_esp_dma_drain(struct esp *esp);
|
|
|
|
static inline struct pci_esp_priv *pci_esp_get_priv(struct esp *esp)
|
|
{
|
|
return dev_get_drvdata(esp->dev);
|
|
}
|
|
|
|
static void pci_esp_write8(struct esp *esp, u8 val, unsigned long reg)
|
|
{
|
|
iowrite8(val, esp->regs + (reg * 4UL));
|
|
}
|
|
|
|
static u8 pci_esp_read8(struct esp *esp, unsigned long reg)
|
|
{
|
|
return ioread8(esp->regs + (reg * 4UL));
|
|
}
|
|
|
|
static void pci_esp_write32(struct esp *esp, u32 val, unsigned long reg)
|
|
{
|
|
return iowrite32(val, esp->regs + (reg * 4UL));
|
|
}
|
|
|
|
static int pci_esp_irq_pending(struct esp *esp)
|
|
{
|
|
struct pci_esp_priv *pep = pci_esp_get_priv(esp);
|
|
|
|
pep->dma_status = pci_esp_read8(esp, ESP_DMA_STATUS);
|
|
esp_dma_log("dma intr dreg[%02x]\n", pep->dma_status);
|
|
|
|
if (pep->dma_status & (ESP_DMA_STAT_ERROR |
|
|
ESP_DMA_STAT_ABORT |
|
|
ESP_DMA_STAT_DONE |
|
|
ESP_DMA_STAT_SCSIINT))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pci_esp_reset_dma(struct esp *esp)
|
|
{
|
|
/* Nothing to do ? */
|
|
}
|
|
|
|
static void pci_esp_dma_drain(struct esp *esp)
|
|
{
|
|
u8 resid;
|
|
int lim = 1000;
|
|
|
|
|
|
if ((esp->sreg & ESP_STAT_PMASK) == ESP_DOP ||
|
|
(esp->sreg & ESP_STAT_PMASK) == ESP_DIP)
|
|
/* Data-In or Data-Out, nothing to be done */
|
|
return;
|
|
|
|
while (--lim > 0) {
|
|
resid = pci_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES;
|
|
if (resid <= 1)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
|
|
/*
|
|
* When there is a residual BCMPLT will never be set
|
|
* (obviously). But we still have to issue the BLAST
|
|
* command, otherwise the data will not being transferred.
|
|
* But we'll never know when the BLAST operation is
|
|
* finished. So check for some time and give up eventually.
|
|
*/
|
|
lim = 1000;
|
|
pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_BLAST, ESP_DMA_CMD);
|
|
while (pci_esp_read8(esp, ESP_DMA_STATUS) & ESP_DMA_STAT_BCMPLT) {
|
|
if (--lim == 0)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
|
|
esp_dma_log("DMA blast done (%d tries, %d bytes left)\n", lim, resid);
|
|
/* BLAST residual handling is currently untested */
|
|
if (WARN_ON_ONCE(resid == 1)) {
|
|
struct esp_cmd_entry *ent = esp->active_cmd;
|
|
|
|
ent->flags |= ESP_CMD_FLAG_RESIDUAL;
|
|
}
|
|
}
|
|
|
|
static void pci_esp_dma_invalidate(struct esp *esp)
|
|
{
|
|
struct pci_esp_priv *pep = pci_esp_get_priv(esp);
|
|
|
|
esp_dma_log("invalidate DMA\n");
|
|
|
|
pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
|
|
pep->dma_status = 0;
|
|
}
|
|
|
|
static int pci_esp_dma_error(struct esp *esp)
|
|
{
|
|
struct pci_esp_priv *pep = pci_esp_get_priv(esp);
|
|
|
|
if (pep->dma_status & ESP_DMA_STAT_ERROR) {
|
|
u8 dma_cmd = pci_esp_read8(esp, ESP_DMA_CMD);
|
|
|
|
if ((dma_cmd & ESP_DMA_CMD_MASK) == ESP_DMA_CMD_START)
|
|
pci_esp_write8(esp, ESP_DMA_CMD_ABORT, ESP_DMA_CMD);
|
|
|
|
return 1;
|
|
}
|
|
if (pep->dma_status & ESP_DMA_STAT_ABORT) {
|
|
pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
|
|
pep->dma_status = pci_esp_read8(esp, ESP_DMA_CMD);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pci_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
|
|
u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct pci_esp_priv *pep = pci_esp_get_priv(esp);
|
|
u32 val = 0;
|
|
|
|
BUG_ON(!(cmd & ESP_CMD_DMA));
|
|
|
|
pep->dma_status = 0;
|
|
|
|
/* Set DMA engine to IDLE */
|
|
if (write)
|
|
/* DMA write direction logic is inverted */
|
|
val |= ESP_DMA_CMD_DIR;
|
|
pci_esp_write8(esp, ESP_DMA_CMD_IDLE | val, ESP_DMA_CMD);
|
|
|
|
pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
if (esp->config2 & ESP_CONFIG2_FENAB)
|
|
pci_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
|
|
|
|
pci_esp_write32(esp, esp_count, ESP_DMA_STC);
|
|
pci_esp_write32(esp, addr, ESP_DMA_SPA);
|
|
|
|
esp_dma_log("start dma addr[%x] count[%d:%d]\n",
|
|
addr, esp_count, dma_count);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
/* Send DMA Start command */
|
|
pci_esp_write8(esp, ESP_DMA_CMD_START | val, ESP_DMA_CMD);
|
|
}
|
|
|
|
static u32 pci_esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len)
|
|
{
|
|
int dma_limit = 16;
|
|
u32 base, end;
|
|
|
|
/*
|
|
* If CONFIG2_FENAB is set we can
|
|
* handle up to 24 bit addresses
|
|
*/
|
|
if (esp->config2 & ESP_CONFIG2_FENAB)
|
|
dma_limit = 24;
|
|
|
|
if (dma_len > (1U << dma_limit))
|
|
dma_len = (1U << dma_limit);
|
|
|
|
/*
|
|
* Prevent crossing a 24-bit address boundary.
|
|
*/
|
|
base = dma_addr & ((1U << 24) - 1U);
|
|
end = base + dma_len;
|
|
if (end > (1U << 24))
|
|
end = (1U <<24);
|
|
dma_len = end - base;
|
|
|
|
return dma_len;
|
|
}
|
|
|
|
static const struct esp_driver_ops pci_esp_ops = {
|
|
.esp_write8 = pci_esp_write8,
|
|
.esp_read8 = pci_esp_read8,
|
|
.irq_pending = pci_esp_irq_pending,
|
|
.reset_dma = pci_esp_reset_dma,
|
|
.dma_drain = pci_esp_dma_drain,
|
|
.dma_invalidate = pci_esp_dma_invalidate,
|
|
.send_dma_cmd = pci_esp_send_dma_cmd,
|
|
.dma_error = pci_esp_dma_error,
|
|
.dma_length_limit = pci_esp_dma_length_limit,
|
|
};
|
|
|
|
/*
|
|
* Read DC-390 eeprom
|
|
*/
|
|
static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd)
|
|
{
|
|
u8 carry_flag = 1, j = 0x80, bval;
|
|
int i;
|
|
|
|
for (i = 0; i < 9; i++) {
|
|
if (carry_flag) {
|
|
pci_write_config_byte(pdev, 0x80, 0x40);
|
|
bval = 0xc0;
|
|
} else
|
|
bval = 0x80;
|
|
|
|
udelay(160);
|
|
pci_write_config_byte(pdev, 0x80, bval);
|
|
udelay(160);
|
|
pci_write_config_byte(pdev, 0x80, 0);
|
|
udelay(160);
|
|
|
|
carry_flag = (cmd & j) ? 1 : 0;
|
|
j >>= 1;
|
|
}
|
|
}
|
|
|
|
static u16 dc390_eeprom_get_data(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
u16 wval = 0;
|
|
u8 bval;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
wval <<= 1;
|
|
|
|
pci_write_config_byte(pdev, 0x80, 0x80);
|
|
udelay(160);
|
|
pci_write_config_byte(pdev, 0x80, 0x40);
|
|
udelay(160);
|
|
pci_read_config_byte(pdev, 0x00, &bval);
|
|
|
|
if (bval == 0x22)
|
|
wval |= 1;
|
|
}
|
|
|
|
return wval;
|
|
}
|
|
|
|
static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr)
|
|
{
|
|
u8 cmd = DC390_EEPROM_READ, i;
|
|
|
|
for (i = 0; i < DC390_EEPROM_LEN; i++) {
|
|
pci_write_config_byte(pdev, 0xc0, 0);
|
|
udelay(160);
|
|
|
|
dc390_eeprom_prepare_read(pdev, cmd++);
|
|
*ptr++ = dc390_eeprom_get_data(pdev);
|
|
|
|
pci_write_config_byte(pdev, 0x80, 0);
|
|
pci_write_config_byte(pdev, 0x80, 0);
|
|
udelay(160);
|
|
}
|
|
}
|
|
|
|
static void dc390_check_eeprom(struct esp *esp)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(esp->dev);
|
|
u8 EEbuf[128];
|
|
u16 *ptr = (u16 *)EEbuf, wval = 0;
|
|
int i;
|
|
|
|
dc390_read_eeprom(pdev, ptr);
|
|
|
|
for (i = 0; i < DC390_EEPROM_LEN; i++, ptr++)
|
|
wval += *ptr;
|
|
|
|
/* no Tekram EEprom found */
|
|
if (wval != 0x1234) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"No valid Tekram EEprom found\n");
|
|
return;
|
|
}
|
|
esp->scsi_id = EEbuf[DC390_EE_ADAPT_SCSI_ID];
|
|
esp->num_tags = 2 << EEbuf[DC390_EE_TAG_CMD_NUM];
|
|
if (EEbuf[DC390_EE_MODE2] & DC390_EE_MODE2_ACTIVE_NEGATION)
|
|
esp->config4 |= ESP_CONFIG4_RADE | ESP_CONFIG4_RAE;
|
|
}
|
|
|
|
static int pci_esp_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
const struct scsi_host_template *hostt = &scsi_esp_template;
|
|
int err = -ENODEV;
|
|
struct Scsi_Host *shost;
|
|
struct esp *esp;
|
|
struct pci_esp_priv *pep;
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
dev_printk(KERN_INFO, &pdev->dev, "cannot enable device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"failed to set 32bit DMA mask\n");
|
|
goto fail_disable_device;
|
|
}
|
|
|
|
shost = scsi_host_alloc(hostt, sizeof(struct esp));
|
|
if (!shost) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"failed to allocate scsi host\n");
|
|
err = -ENOMEM;
|
|
goto fail_disable_device;
|
|
}
|
|
|
|
pep = kzalloc(sizeof(struct pci_esp_priv), GFP_KERNEL);
|
|
if (!pep) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"failed to allocate esp_priv\n");
|
|
err = -ENOMEM;
|
|
goto fail_host_alloc;
|
|
}
|
|
|
|
esp = shost_priv(shost);
|
|
esp->host = shost;
|
|
esp->dev = &pdev->dev;
|
|
esp->ops = &pci_esp_ops;
|
|
/*
|
|
* The am53c974 HBA has a design flaw of generating
|
|
* spurious DMA completion interrupts when using
|
|
* DMA for command submission.
|
|
*/
|
|
esp->flags |= ESP_FLAG_USE_FIFO;
|
|
/*
|
|
* Enable CONFIG2_FENAB to allow for large DMA transfers
|
|
*/
|
|
if (am53c974_fenab)
|
|
esp->config2 |= ESP_CONFIG2_FENAB;
|
|
|
|
pep->esp = esp;
|
|
|
|
if (pci_request_regions(pdev, DRV_MODULE_NAME)) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"pci memory selection failed\n");
|
|
goto fail_priv_alloc;
|
|
}
|
|
|
|
esp->regs = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
|
|
if (!esp->regs) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "pci I/O map failed\n");
|
|
err = -EINVAL;
|
|
goto fail_release_regions;
|
|
}
|
|
esp->dma_regs = esp->regs;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
esp->command_block = dma_alloc_coherent(&pdev->dev, 16,
|
|
&esp->command_block_dma, GFP_KERNEL);
|
|
if (!esp->command_block) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"failed to allocate command block\n");
|
|
err = -ENOMEM;
|
|
goto fail_unmap_regs;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, pep);
|
|
|
|
err = request_irq(pdev->irq, scsi_esp_intr, IRQF_SHARED,
|
|
DRV_MODULE_NAME, esp);
|
|
if (err < 0) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to register IRQ\n");
|
|
goto fail_unmap_command_block;
|
|
}
|
|
|
|
esp->scsi_id = 7;
|
|
dc390_check_eeprom(esp);
|
|
|
|
shost->this_id = esp->scsi_id;
|
|
shost->max_id = 8;
|
|
shost->irq = pdev->irq;
|
|
shost->io_port = pci_resource_start(pdev, 0);
|
|
shost->n_io_port = pci_resource_len(pdev, 0);
|
|
shost->unique_id = shost->io_port;
|
|
esp->scsi_id_mask = (1 << esp->scsi_id);
|
|
/* Assume 40MHz clock */
|
|
esp->cfreq = 40000000;
|
|
|
|
err = scsi_esp_register(esp);
|
|
if (err)
|
|
goto fail_free_irq;
|
|
|
|
return 0;
|
|
|
|
fail_free_irq:
|
|
free_irq(pdev->irq, esp);
|
|
fail_unmap_command_block:
|
|
pci_set_drvdata(pdev, NULL);
|
|
dma_free_coherent(&pdev->dev, 16, esp->command_block,
|
|
esp->command_block_dma);
|
|
fail_unmap_regs:
|
|
pci_iounmap(pdev, esp->regs);
|
|
fail_release_regions:
|
|
pci_release_regions(pdev);
|
|
fail_priv_alloc:
|
|
kfree(pep);
|
|
fail_host_alloc:
|
|
scsi_host_put(shost);
|
|
fail_disable_device:
|
|
pci_disable_device(pdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void pci_esp_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct pci_esp_priv *pep = pci_get_drvdata(pdev);
|
|
struct esp *esp = pep->esp;
|
|
|
|
scsi_esp_unregister(esp);
|
|
free_irq(pdev->irq, esp);
|
|
pci_set_drvdata(pdev, NULL);
|
|
dma_free_coherent(&pdev->dev, 16, esp->command_block,
|
|
esp->command_block_dma);
|
|
pci_iounmap(pdev, esp->regs);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
kfree(pep);
|
|
|
|
scsi_host_put(esp->host);
|
|
}
|
|
|
|
static struct pci_device_id am53c974_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SCSI,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, am53c974_pci_tbl);
|
|
|
|
static struct pci_driver am53c974_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = am53c974_pci_tbl,
|
|
.probe = pci_esp_probe_one,
|
|
.remove = pci_esp_remove_one,
|
|
};
|
|
|
|
module_pci_driver(am53c974_driver);
|
|
|
|
MODULE_DESCRIPTION("AM53C974 SCSI driver");
|
|
MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
MODULE_ALIAS("tmscsim");
|
|
|
|
module_param(am53c974_debug, bool, 0644);
|
|
MODULE_PARM_DESC(am53c974_debug, "Enable debugging");
|
|
|
|
module_param(am53c974_fenab, bool, 0444);
|
|
MODULE_PARM_DESC(am53c974_fenab, "Enable 24-bit DMA transfer sizes");
|