korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-30 23:54:04 +08:00
Code Issues Packages Projects Releases Wiki Activity
4106684e11
linux/drivers/mfd/ucb1x00-core.c
Linus Torvalds 58cf279aca GPIO bulk updates for the v4.5 kernel cycle: 
Infrastructural changes:
 
 - In struct gpio_chip, rename the .dev node to .parent to better reflect
   the fact that this is not the GPIO struct device abstraction. We will
   add that soon so this would be totallt confusing.
 
 - It was noted that the driver .get_value() callbacks was
   sometimes reporting negative -ERR values to the gpiolib core, expecting
   them to be propagated to consumer gpiod_get_value() and gpio_get_value()
   calls. This was not happening, so as there was a mess of drivers
   returning negative errors and some returning "anything else than zero"
   to indicate that a line was active. As some would have bit 31 set to
   indicate "line active" it clashed with negative error codes. This is
   fixed by the largeish series clamping values in all drivers with
   !!value to [0,1] and then augmenting the code to propagate error codes
   to consumers. (Includes some ACKed patches in other subsystems.)
 
 - Add a void *data pointer to struct gpio_chip. The container_of() design
   pattern is indeed very nice, but we want to reform the struct gpio_chip
   to be a non-volative, stateless business, and keep states internal to
   the gpiolib to be able to hold on to the state when adding a proper
   userspace ABI (character device) further down the road. To achieve this,
   drivers need a handle at the internal state that is not dependent on
   their struct gpio_chip() so we add gpiochip_add_data() and
   gpiochip_get_data() following the pattern of many other subsystems.
   All the "use gpiochip data pointer" patches transforms drivers to this
   scheme.
 
 - The Generic GPIO chip header has been merged into the general
   <linux/gpio/driver.h> header, and the custom header for that removed.
   Instead of having a separate mm_gpio_chip struct for these generic
   drivers, merge that into struct gpio_chip, simplifying the code and
   removing the need for separate and confusing includes.
 
 Misc improvements:
 
 - Stabilize the way GPIOs are looked up from the ACPI legacy
   specification.
 
 - Incremental driver features for PXA, PCA953X, Lantiq (patches from the
   OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
 
 New drivers:
 
 - Add a GPIO chip to the ALSA SoC AC97 driver.
 
 - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but
   the branch is merged here too to account for infrastructural changes).
 
 - The sx150x driver now supports the sx1502.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWmsZhAAoJEEEQszewGV1ztq0QAJ1KbNOpmf/s3INkOH4r771Z
 WIrNEsmwwLIAryo8gKNOM0H1zCwhRUV7hIE5jYWgD6JvjuAN6vobMlZAq21j6YpB
 pKgqnI5DuoND450xjb8wSwGQ5NTYp1rFXNmwCrtyTjOle6AAW+Kp2cvVWxVr77Av
 uJinRuuBr9GOKW/yYM1Fw/6EPjkvvhVOb+LBguRyVvq0s5Peyw7ZVeY1tjgPHJLn
 oSZ9dmPUjHEn91oZQbtfro3plOObcxdgJ8vo//pgEmyhMeR8XjXES+aUfErxqWOU
 PimrZuMMy4cxnsqWwh3Dyxo7KSWfJKfSPRwnGwc/HgbHZEoWxOZI1ezRtGKrRQtj
 vubxp5dUBA5z66TMsOCeJtzKVSofkvgX2Wr/Y9jKp5oy9cHdAZv9+jEHV1pr6asz
 Tas97MmmO77XuRI/GPDqVHx8dfa15OIz9s92+Gu64KxNzVxTo4+NdoPSNxkbCILO
 FKn7EmU3D0OjmN2NJ9GAURoFaj3BBUgNhaxacG9j2bieyh+euuUHRtyh2k8zXR9y
 8OnY1UOrTUYF8YIq9pXZxMQRD/lqwCNHvEjtI6BqMcNx4MptfTL+FKYUkn/SgCYk
 QTNV6Ui+ety5D5aEpp5q0ItGsrDJ2LYSItsS+cOtMy2ieOxbQav9NWwu7eI3l5ly
 gwYTZjG9p9joPXLW0E3g
 =63rR
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for v4.5.

  Notably there are big refactorings mostly by myself, aimed at getting
  the gpio_chip into a shape that makes me believe I can proceed to
  preserve state for a proper userspace ABI (character device) that has
  already been proposed once, but resulted in the feedback that I need
  to go back and restructure stuff.  So I've been restructuring stuff.
  On the way I ran into brokenness (return code from the get_value()
  callback) and had to fix it.  Also, refactored generic GPIO to be
  simpler.

  Some of that is still waiting to trickle down from the subsystems all
  over the kernel that provide random gpio_chips, I've touched every
  single GPIO driver in the kernel now, oh man I didn't know I was
  responsible for so much...

  Apart from that we're churning along as usual.

  I took some effort to test and retest so it should merge nicely and we
  shook out a couple of bugs in -next.

  Infrastructural changes:

   - In struct gpio_chip, rename the .dev node to .parent to better
     reflect the fact that this is not the GPIO struct device
     abstraction.  We will add that soon so this would be totallt
     confusing.

   - It was noted that the driver .get_value() callbacks was sometimes
     reporting negative -ERR values to the gpiolib core, expecting them
     to be propagated to consumer gpiod_get_value() and gpio_get_value()
     calls.  This was not happening, so as there was a mess of drivers
     returning negative errors and some returning "anything else than
     zero" to indicate that a line was active.  As some would have bit
     31 set to indicate "line active" it clashed with negative error
     codes.  This is fixed by the largeish series clamping values in all
     drivers with !!value to [0,1] and then augmenting the code to
     propagate error codes to consumers.  (Includes some ACKed patches
     in other subsystems.)

   - Add a void *data pointer to struct gpio_chip.  The container_of()
     design pattern is indeed very nice, but we want to reform the
     struct gpio_chip to be a non-volative, stateless business, and keep
     states internal to the gpiolib to be able to hold on to the state
     when adding a proper userspace ABI (character device) further down
     the road.  To achieve this, drivers need a handle at the internal
     state that is not dependent on their struct gpio_chip() so we add
     gpiochip_add_data() and gpiochip_get_data() following the pattern
     of many other subsystems.  All the "use gpiochip data pointer"
     patches transforms drivers to this scheme.

   - The Generic GPIO chip header has been merged into the general
     <linux/gpio/driver.h> header, and the custom header for that
     removed.  Instead of having a separate mm_gpio_chip struct for
     these generic drivers, merge that into struct gpio_chip,
     simplifying the code and removing the need for separate and
     confusing includes.

  Misc improvements:

   - Stabilize the way GPIOs are looked up from the ACPI legacy
     specification.

   - Incremental driver features for PXA, PCA953X, Lantiq (patches from
     the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48

  New drivers:

   - Add a GPIO chip to the ALSA SoC AC97 driver.

   - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
     but the branch is merged here too to account for infrastructural
     changes).

   - The sx150x driver now supports the sx1502"

* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
  gpio: generic: make bgpio_pdata always visible
  gpiolib: fix chip order in gpio list
  gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
  gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
  gpio: brcmstb: Allow building driver for BMIPS_GENERIC
  gpio: brcmstb: Set endian flags for big-endian MIPS
  gpio: moxart: fix build regression
  gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
  leds: pca9532: use gpiochip data pointer
  leds: tca6507: use gpiochip data pointer
  hid: cp2112: use gpiochip data pointer
  bcma: gpio: use gpiochip data pointer
  avr32: gpio: use gpiochip data pointer
  video: fbdev: via: use gpiochip data pointer
  gpio: pch: Optimize pch_gpio_get()
  Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
  pinctrl: nsp-gpio: use gpiochip data pointer
  pinctrl: vt8500-wmt: use gpiochip data pointer
  pinctrl: exynos5440: use gpiochip data pointer
  pinctrl: at91-pio4: use gpiochip data pointer
  ...
2016-01-17 12:32:01 -08:00

787 lines
20 KiB
C
Raw Blame History

/*
* linux/drivers/mfd/ucb1x00-core.c
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* The UCB1x00 core driver provides basic services for handling IO,
* the ADC, interrupts, and accessing registers. It is designed
* such that everything goes through this layer, thereby providing
* a consistent locking methodology, as well as allowing the drivers
* to be used on other non-MCP-enabled hardware platforms.
*
* Note that all locks are private to this file. Nothing else may
* touch them.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/mfd/ucb1x00.h>
#include <linux/pm.h>
#include <linux/gpio.h>
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
/**
* ucb1x00_io_set_dir - set IO direction
* @ucb: UCB1x00 structure describing chip
* @in: bitfield of IO pins to be set as inputs
* @out: bitfield of IO pins to be set as outputs
*
* Set the IO direction of the ten general purpose IO pins on
* the UCB1x00 chip. The @in bitfield has priority over the
* @out bitfield, in that if you specify a pin as both input
* and output, it will end up as an input.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function takes a spinlock, disabling interrupts.
*/
void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int in, unsigned int out)
{
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_dir |= out;
ucb->io_dir &= ~in;
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
* ucb1x00_io_write - set or clear IO outputs
* @ucb: UCB1x00 structure describing chip
* @set: bitfield of IO pins to set to logic '1'
* @clear: bitfield of IO pins to set to logic '0'
*
* Set the IO output state of the specified IO pins. The value
* is retained if the pins are subsequently configured as inputs.
* The @clear bitfield has priority over the @set bitfield -
* outputs will be cleared.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function takes a spinlock, disabling interrupts.
*/
void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
{
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_out |= set;
ucb->io_out &= ~clear;
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
* ucb1x00_io_read - read the current state of the IO pins
* @ucb: UCB1x00 structure describing chip
*
* Return a bitfield describing the logic state of the ten
* general purpose IO pins.
*
* ucb1x00_enable must have been called to enable the comms
* before using this function.
*
* This function does not take any mutexes or spinlocks.
*/
unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
{
return ucb1x00_reg_read(ucb, UCB_IO_DATA);
}
static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
if (value)
ucb->io_out |= 1 << offset;
else
ucb->io_out &= ~(1 << offset);
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
}
static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
unsigned val;
ucb1x00_enable(ucb);
val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
ucb1x00_disable(ucb);
return !!(val & (1 << offset));
}
static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
unsigned long flags;
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_dir &= ~(1 << offset);
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
return 0;
}
static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
, int value)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
unsigned long flags;
unsigned old, mask = 1 << offset;
spin_lock_irqsave(&ucb->io_lock, flags);
old = ucb->io_out;
if (value)
ucb->io_out |= mask;
else
ucb->io_out &= ~mask;
ucb1x00_enable(ucb);
if (old != ucb->io_out)
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
if (!(ucb->io_dir & mask)) {
ucb->io_dir |= mask;
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
}
ucb1x00_disable(ucb);
spin_unlock_irqrestore(&ucb->io_lock, flags);
return 0;
}
static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
}
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
* 2. select input => 51*tsibclk => 4.3us
* 3. start conversion => 102*tsibclk => 8.5us
* (tsibclk = 1/11981000)
* Period between SIB 128-bit frames = 10.7us
*/
/**
* ucb1x00_adc_enable - enable the ADC converter
* @ucb: UCB1x00 structure describing chip
*
* Enable the ucb1x00 and ADC converter on the UCB1x00 for use.
* Any code wishing to use the ADC converter must call this
* function prior to using it.
*
* This function takes the ADC mutex to prevent two or more
* concurrent uses, and therefore may sleep. As a result, it
* can only be called from process context, not interrupt
* context.
*
* You should release the ADC as soon as possible using
* ucb1x00_adc_disable.
*/
void ucb1x00_adc_enable(struct ucb1x00 *ucb)
{
mutex_lock(&ucb->adc_mutex);
ucb->adc_cr |= UCB_ADC_ENA;
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
}
/**
* ucb1x00_adc_read - read the specified ADC channel
* @ucb: UCB1x00 structure describing chip
* @adc_channel: ADC channel mask
* @sync: wait for syncronisation pulse.
*
* Start an ADC conversion and wait for the result. Note that
* synchronised ADC conversions (via the ADCSYNC pin) must wait
* until the trigger is asserted and the conversion is finished.
*
* This function currently spins waiting for the conversion to
* complete (2 frames max without sync).
*
* If called for a synchronised ADC conversion, it may sleep
* with the ADC mutex held.
*/
unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
{
unsigned int val;
if (sync)
adc_channel |= UCB_ADC_SYNC_ENA;
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
for (;;) {
val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
if (val & UCB_ADC_DAT_VAL)
break;
/* yield to other processes */
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(1);
}
return UCB_ADC_DAT(val);
}
/**
* ucb1x00_adc_disable - disable the ADC converter
* @ucb: UCB1x00 structure describing chip
*
* Disable the ADC converter and release the ADC mutex.
*/
void ucb1x00_adc_disable(struct ucb1x00 *ucb)
{
ucb->adc_cr &= ~UCB_ADC_ENA;
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
ucb1x00_disable(ucb);
mutex_unlock(&ucb->adc_mutex);
}
/*
* UCB1x00 Interrupt handling.
*
* The UCB1x00 can generate interrupts when the SIBCLK is stopped.
* Since we need to read an internal register, we must re-enable
* SIBCLK to talk to the chip. We leave the clock running until
* we have finished processing all interrupts from the chip.
*/
static void ucb1x00_irq(struct irq_desc *desc)
{
struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
unsigned int isr, i;
ucb1x00_enable(ucb);
isr = ucb1x00_reg_read(ucb, UCB_IE_STATUS);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
for (i = 0; i < 16 && isr; i++, isr >>= 1)
if (isr & 1)
generic_handle_irq(ucb->irq_base + i);
ucb1x00_disable(ucb);
}
static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
{
ucb1x00_enable(ucb);
if (ucb->irq_ris_enbl & mask)
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
ucb->irq_mask);
if (ucb->irq_fal_enbl & mask)
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
ucb->irq_mask);
ucb1x00_disable(ucb);
}
static void ucb1x00_irq_noop(struct irq_data *data)
{
}
static void ucb1x00_irq_mask(struct irq_data *data)
{
struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
unsigned mask = 1 << (data->irq - ucb->irq_base);
raw_spin_lock(&ucb->irq_lock);
ucb->irq_mask &= ~mask;
ucb1x00_irq_update(ucb, mask);
raw_spin_unlock(&ucb->irq_lock);
}
static void ucb1x00_irq_unmask(struct irq_data *data)
{
struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
unsigned mask = 1 << (data->irq - ucb->irq_base);
raw_spin_lock(&ucb->irq_lock);
ucb->irq_mask |= mask;
ucb1x00_irq_update(ucb, mask);
raw_spin_unlock(&ucb->irq_lock);
}
static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
{
struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
unsigned mask = 1 << (data->irq - ucb->irq_base);
raw_spin_lock(&ucb->irq_lock);
if (type & IRQ_TYPE_EDGE_RISING)
ucb->irq_ris_enbl |= mask;
else
ucb->irq_ris_enbl &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
ucb->irq_fal_enbl |= mask;
else
ucb->irq_fal_enbl &= ~mask;
if (ucb->irq_mask & mask) {
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
ucb->irq_mask);
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
ucb->irq_mask);
}
raw_spin_unlock(&ucb->irq_lock);
return 0;
}
static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
unsigned mask = 1 << (data->irq - ucb->irq_base);
if (!pdata || !pdata->can_wakeup)
return -EINVAL;
raw_spin_lock(&ucb->irq_lock);
if (on)
ucb->irq_wake |= mask;
else
ucb->irq_wake &= ~mask;
raw_spin_unlock(&ucb->irq_lock);
return 0;
}
static struct irq_chip ucb1x00_irqchip = {
.name = "ucb1x00",
.irq_ack = ucb1x00_irq_noop,
.irq_mask = ucb1x00_irq_mask,
.irq_unmask = ucb1x00_irq_unmask,
.irq_set_type = ucb1x00_irq_set_type,
.irq_set_wake = ucb1x00_irq_set_wake,
};
static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
{
struct ucb1x00_dev *dev;
int ret;
dev = kmalloc(sizeof(struct ucb1x00_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->ucb = ucb;
dev->drv = drv;
ret = drv->add(dev);
if (ret) {
kfree(dev);
return ret;
}
list_add_tail(&dev->dev_node, &ucb->devs);
list_add_tail(&dev->drv_node, &drv->devs);
return ret;
}
static void ucb1x00_remove_dev(struct ucb1x00_dev *dev)
{
dev->drv->remove(dev);
list_del(&dev->dev_node);
list_del(&dev->drv_node);
kfree(dev);
}
/*
* Try to probe our interrupt, rather than relying on lots of
* hard-coded machine dependencies. For reference, the expected
* IRQ mappings are:
*
* Machine Default IRQ
* adsbitsy IRQ_GPCIN4
* cerf IRQ_GPIO_UCB1200_IRQ
* flexanet IRQ_GPIO_GUI
* freebird IRQ_GPIO_FREEBIRD_UCB1300_IRQ
* graphicsclient ADS_EXT_IRQ(8)
* graphicsmaster ADS_EXT_IRQ(8)
* lart LART_IRQ_UCB1200
* omnimeter IRQ_GPIO23
* pfs168 IRQ_GPIO_UCB1300_IRQ
* simpad IRQ_GPIO_UCB1300_IRQ
* shannon SHANNON_IRQ_GPIO_IRQ_CODEC
* yopy IRQ_GPIO_UCB1200_IRQ
*/
static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
{
unsigned long mask;
mask = probe_irq_on();
if (!mask) {
probe_irq_off(mask);
return NO_IRQ;
}
/*
* Enable the ADC interrupt.
*/
ucb1x00_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
ucb1x00_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
/*
* Cause an ADC interrupt.
*/
ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
/*
* Wait for the conversion to complete.
*/
while ((ucb1x00_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VAL) == 0);
ucb1x00_reg_write(ucb, UCB_ADC_CR, 0);
/*
* Disable and clear interrupt.
*/
ucb1x00_reg_write(ucb, UCB_IE_RIS, 0);
ucb1x00_reg_write(ucb, UCB_IE_FAL, 0);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
/*
* Read triggered interrupt.
*/
return probe_irq_off(mask);
}
static void ucb1x00_release(struct device *dev)
{
struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
kfree(ucb);
}
static struct class ucb1x00_class = {
.name = "ucb1x00",
.dev_release = ucb1x00_release,
};
static int ucb1x00_probe(struct mcp *mcp)
{
struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
struct ucb1x00_driver *drv;
struct ucb1x00 *ucb;
unsigned id, i, irq_base;
int ret = -ENODEV;
/* Tell the platform to deassert the UCB1x00 reset */
if (pdata && pdata->reset)
pdata->reset(UCB_RST_PROBE);
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
mcp_disable(mcp);
if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto out;
}
ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
ret = -ENOMEM;
if (!ucb)
goto out;
device_initialize(&ucb->dev);
ucb->dev.class = &ucb1x00_class;
ucb->dev.parent = &mcp->attached_device;
dev_set_name(&ucb->dev, "ucb1x00");
raw_spin_lock_init(&ucb->irq_lock);
spin_lock_init(&ucb->io_lock);
mutex_init(&ucb->adc_mutex);
ucb->id = id;
ucb->mcp = mcp;
ret = device_add(&ucb->dev);
if (ret)
goto err_dev_add;
ucb1x00_enable(ucb);
ucb->irq = ucb1x00_detect_irq(ucb);
ucb1x00_disable(ucb);
if (ucb->irq == NO_IRQ) {
dev_err(&ucb->dev, "IRQ probe failed\n");
ret = -ENODEV;
goto err_no_irq;
}
ucb->gpio.base = -1;
irq_base = pdata ? pdata->irq_base : 0;
ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
if (ucb->irq_base < 0) {
dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
ucb->irq_base);
ret = ucb->irq_base;
goto err_irq_alloc;
}
for (i = 0; i < 16; i++) {
unsigned irq = ucb->irq_base + i;
irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
irq_set_chip_data(irq, ucb);
irq_clear_status_flags(irq, IRQ_NOREQUEST);
}
irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
irq_set_chained_handler_and_data(ucb->irq, ucb1x00_irq, ucb);
if (pdata && pdata->gpio_base) {
ucb->gpio.label = dev_name(&ucb->dev);
ucb->gpio.parent = &ucb->dev;
ucb->gpio.owner = THIS_MODULE;
ucb->gpio.base = pdata->gpio_base;
ucb->gpio.ngpio = 10;
ucb->gpio.set = ucb1x00_gpio_set;
ucb->gpio.get = ucb1x00_gpio_get;
ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
ucb->gpio.to_irq = ucb1x00_to_irq;
ret = gpiochip_add(&ucb->gpio);
if (ret)
goto err_gpio_add;
} else
dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
mcp_set_drvdata(mcp, ucb);
if (pdata)
device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
list_add_tail(&ucb->node, &ucb1x00_devices);
list_for_each_entry(drv, &ucb1x00_drivers, node) {
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
return ret;
err_gpio_add:
irq_set_chained_handler(ucb->irq, NULL);
err_irq_alloc:
if (ucb->irq_base > 0)
irq_free_descs(ucb->irq_base, 16);
err_no_irq:
device_del(&ucb->dev);
err_dev_add:
put_device(&ucb->dev);
out:
if (pdata && pdata->reset)
pdata->reset(UCB_RST_PROBE_FAIL);
return ret;
}
static void ucb1x00_remove(struct mcp *mcp)
{
struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
mutex_lock(&ucb1x00_mutex);
list_del(&ucb->node);
list_for_each_safe(l, n, &ucb->devs) {
struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, dev_node);
ucb1x00_remove_dev(dev);
}
mutex_unlock(&ucb1x00_mutex);
if (ucb->gpio.base != -1)
gpiochip_remove(&ucb->gpio);
irq_set_chained_handler(ucb->irq, NULL);
irq_free_descs(ucb->irq_base, 16);
device_unregister(&ucb->dev);
if (pdata && pdata->reset)
pdata->reset(UCB_RST_REMOVE);
}
int ucb1x00_register_driver(struct ucb1x00_driver *drv)
{
struct ucb1x00 *ucb;
INIT_LIST_HEAD(&drv->devs);
mutex_lock(&ucb1x00_mutex);
list_add_tail(&drv->node, &ucb1x00_drivers);
list_for_each_entry(ucb, &ucb1x00_devices, node) {
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
{
struct list_head *n, *l;
mutex_lock(&ucb1x00_mutex);
list_del(&drv->node);
list_for_each_safe(l, n, &drv->devs) {
struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, drv_node);
ucb1x00_remove_dev(dev);
}
mutex_unlock(&ucb1x00_mutex);
}
#ifdef CONFIG_PM_SLEEP
static int ucb1x00_suspend(struct device *dev)
{
struct ucb1x00_plat_data *pdata = dev_get_platdata(dev);
struct ucb1x00 *ucb = dev_get_drvdata(dev);
struct ucb1x00_dev *udev;
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(udev, &ucb->devs, dev_node) {
if (udev->drv->suspend)
udev->drv->suspend(udev);
}
mutex_unlock(&ucb1x00_mutex);
if (ucb->irq_wake) {
unsigned long flags;
raw_spin_lock_irqsave(&ucb->irq_lock, flags);
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
ucb->irq_wake);
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
ucb->irq_wake);
ucb1x00_disable(ucb);
raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
enable_irq_wake(ucb->irq);
} else if (pdata && pdata->reset)
pdata->reset(UCB_RST_SUSPEND);
return 0;
}
static int ucb1x00_resume(struct device *dev)
{
struct ucb1x00_plat_data *pdata = dev_get_platdata(dev);
struct ucb1x00 *ucb = dev_get_drvdata(dev);
struct ucb1x00_dev *udev;
if (!ucb->irq_wake && pdata && pdata->reset)
pdata->reset(UCB_RST_RESUME);
ucb1x00_enable(ucb);
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
if (ucb->irq_wake) {
unsigned long flags;
raw_spin_lock_irqsave(&ucb->irq_lock, flags);
ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
ucb->irq_mask);
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
ucb->irq_mask);
raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
disable_irq_wake(ucb->irq);
}
ucb1x00_disable(ucb);
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(udev, &ucb->devs, dev_node) {
if (udev->drv->resume)
udev->drv->resume(udev);
}
mutex_unlock(&ucb1x00_mutex);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume);
static struct mcp_driver ucb1x00_driver = {
.drv = {
.name = "ucb1x00",
.owner = THIS_MODULE,
.pm = &ucb1x00_pm_ops,
},
.probe = ucb1x00_probe,
.remove = ucb1x00_remove,
};
static int __init ucb1x00_init(void)
{
int ret = class_register(&ucb1x00_class);
if (ret == 0) {
ret = mcp_driver_register(&ucb1x00_driver);
if (ret)
class_unregister(&ucb1x00_class);
}
return ret;
}
static void __exit ucb1x00_exit(void)
{
mcp_driver_unregister(&ucb1x00_driver);
class_unregister(&ucb1x00_class);
}
module_init(ucb1x00_init);
module_exit(ucb1x00_exit);
EXPORT_SYMBOL(ucb1x00_io_set_dir);
EXPORT_SYMBOL(ucb1x00_io_write);
EXPORT_SYMBOL(ucb1x00_io_read);
EXPORT_SYMBOL(ucb1x00_adc_enable);
EXPORT_SYMBOL(ucb1x00_adc_read);
EXPORT_SYMBOL(ucb1x00_adc_disable);
EXPORT_SYMBOL(ucb1x00_register_driver);
EXPORT_SYMBOL(ucb1x00_unregister_driver);
MODULE_ALIAS("mcp:ucb1x00");
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("UCB1x00 core driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink