mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
3153b68e4d
Some platform(BIOS) blocks legacy interrupts (INTx), and only allows MSI for WLAN device. So adding a quirk to list those machines and set use_msi automatically. Adding the following platforms to the quirk. Dell Inspiron 24-3460 Dell Inspiron 3472 Dell Inspiron 14-3473 Dell Vostro 3262 Dell Vostro 15-3572 Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
1177 lines
30 KiB
C
1177 lines
30 KiB
C
/*
|
|
* Copyright (c) 2008-2011 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/relay.h>
|
|
#include <linux/dmi.h>
|
|
#include <net/ieee80211_radiotap.h>
|
|
|
|
#include "ath9k.h"
|
|
|
|
struct ath9k_eeprom_ctx {
|
|
struct completion complete;
|
|
struct ath_hw *ah;
|
|
};
|
|
|
|
static char *dev_info = "ath9k";
|
|
|
|
MODULE_AUTHOR("Atheros Communications");
|
|
MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
|
|
MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
|
|
module_param_named(debug, ath9k_debug, uint, 0);
|
|
MODULE_PARM_DESC(debug, "Debugging mask");
|
|
|
|
int ath9k_modparam_nohwcrypt;
|
|
module_param_named(nohwcrypt, ath9k_modparam_nohwcrypt, int, 0444);
|
|
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
|
|
|
|
int ath9k_led_blink;
|
|
module_param_named(blink, ath9k_led_blink, int, 0444);
|
|
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
|
|
|
|
static int ath9k_led_active_high = -1;
|
|
module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
|
|
MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
|
|
|
|
static int ath9k_btcoex_enable;
|
|
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
|
|
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
|
|
|
|
static int ath9k_bt_ant_diversity;
|
|
module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444);
|
|
MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity");
|
|
|
|
static int ath9k_ps_enable;
|
|
module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
|
|
MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
|
|
|
|
#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
|
|
|
|
int ath9k_use_chanctx;
|
|
module_param_named(use_chanctx, ath9k_use_chanctx, int, 0444);
|
|
MODULE_PARM_DESC(use_chanctx, "Enable channel context for concurrency");
|
|
|
|
#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
|
|
|
|
int ath9k_use_msi;
|
|
module_param_named(use_msi, ath9k_use_msi, int, 0444);
|
|
MODULE_PARM_DESC(use_msi, "Use MSI instead of INTx if possible");
|
|
|
|
bool is_ath9k_unloaded;
|
|
|
|
#ifdef CONFIG_MAC80211_LEDS
|
|
static const struct ieee80211_tpt_blink ath9k_tpt_blink[] = {
|
|
{ .throughput = 0 * 1024, .blink_time = 334 },
|
|
{ .throughput = 1 * 1024, .blink_time = 260 },
|
|
{ .throughput = 5 * 1024, .blink_time = 220 },
|
|
{ .throughput = 10 * 1024, .blink_time = 190 },
|
|
{ .throughput = 20 * 1024, .blink_time = 170 },
|
|
{ .throughput = 50 * 1024, .blink_time = 150 },
|
|
{ .throughput = 70 * 1024, .blink_time = 130 },
|
|
{ .throughput = 100 * 1024, .blink_time = 110 },
|
|
{ .throughput = 200 * 1024, .blink_time = 80 },
|
|
{ .throughput = 300 * 1024, .blink_time = 50 },
|
|
};
|
|
#endif
|
|
|
|
static int __init set_use_msi(const struct dmi_system_id *dmi)
|
|
{
|
|
ath9k_use_msi = 1;
|
|
return 1;
|
|
}
|
|
|
|
static const struct dmi_system_id ath9k_quirks[] __initconst = {
|
|
{
|
|
.callback = set_use_msi,
|
|
.ident = "Dell Inspiron 24-3460",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 24-3460"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_use_msi,
|
|
.ident = "Dell Vostro 3262",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3262"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_use_msi,
|
|
.ident = "Dell Inspiron 3472",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 3472"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_use_msi,
|
|
.ident = "Dell Vostro 15-3572",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 15-3572"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_use_msi,
|
|
.ident = "Dell Inspiron 14-3473",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14-3473"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
static void ath9k_deinit_softc(struct ath_softc *sc);
|
|
|
|
static void ath9k_op_ps_wakeup(struct ath_common *common)
|
|
{
|
|
ath9k_ps_wakeup((struct ath_softc *) common->priv);
|
|
}
|
|
|
|
static void ath9k_op_ps_restore(struct ath_common *common)
|
|
{
|
|
ath9k_ps_restore((struct ath_softc *) common->priv);
|
|
}
|
|
|
|
static const struct ath_ps_ops ath9k_ps_ops = {
|
|
.wakeup = ath9k_op_ps_wakeup,
|
|
.restore = ath9k_op_ps_restore,
|
|
};
|
|
|
|
/*
|
|
* Read and write, they both share the same lock. We do this to serialize
|
|
* reads and writes on Atheros 802.11n PCI devices only. This is required
|
|
* as the FIFO on these devices can only accept sanely 2 requests.
|
|
*/
|
|
|
|
static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
|
|
{
|
|
struct ath_hw *ah = hw_priv;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath_softc *sc = (struct ath_softc *) common->priv;
|
|
|
|
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) {
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&sc->sc_serial_rw, flags);
|
|
iowrite32(val, sc->mem + reg_offset);
|
|
spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
|
|
} else
|
|
iowrite32(val, sc->mem + reg_offset);
|
|
}
|
|
|
|
static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
|
|
{
|
|
struct ath_hw *ah = hw_priv;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath_softc *sc = (struct ath_softc *) common->priv;
|
|
u32 val;
|
|
|
|
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) {
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&sc->sc_serial_rw, flags);
|
|
val = ioread32(sc->mem + reg_offset);
|
|
spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
|
|
} else
|
|
val = ioread32(sc->mem + reg_offset);
|
|
return val;
|
|
}
|
|
|
|
static void ath9k_multi_ioread32(void *hw_priv, u32 *addr,
|
|
u32 *val, u16 count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
val[i] = ath9k_ioread32(hw_priv, addr[i]);
|
|
}
|
|
|
|
|
|
static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset,
|
|
u32 set, u32 clr)
|
|
{
|
|
u32 val;
|
|
|
|
val = ioread32(sc->mem + reg_offset);
|
|
val &= ~clr;
|
|
val |= set;
|
|
iowrite32(val, sc->mem + reg_offset);
|
|
|
|
return val;
|
|
}
|
|
|
|
static unsigned int ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr)
|
|
{
|
|
struct ath_hw *ah = hw_priv;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath_softc *sc = (struct ath_softc *) common->priv;
|
|
unsigned long uninitialized_var(flags);
|
|
u32 val;
|
|
|
|
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) {
|
|
spin_lock_irqsave(&sc->sc_serial_rw, flags);
|
|
val = __ath9k_reg_rmw(sc, reg_offset, set, clr);
|
|
spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
|
|
} else
|
|
val = __ath9k_reg_rmw(sc, reg_offset, set, clr);
|
|
|
|
return val;
|
|
}
|
|
|
|
/**************************/
|
|
/* Initialization */
|
|
/**************************/
|
|
|
|
static void ath9k_reg_notifier(struct wiphy *wiphy,
|
|
struct regulatory_request *request)
|
|
{
|
|
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
|
|
struct ath_softc *sc = hw->priv;
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
|
|
|
|
ath_reg_notifier_apply(wiphy, request, reg);
|
|
|
|
/* Set tx power */
|
|
if (!ah->curchan)
|
|
return;
|
|
|
|
sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
|
|
ath9k_ps_wakeup(sc);
|
|
ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
|
|
ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
|
|
sc->cur_chan->txpower,
|
|
&sc->cur_chan->cur_txpower);
|
|
/* synchronize DFS detector if regulatory domain changed */
|
|
if (sc->dfs_detector != NULL)
|
|
sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
|
|
request->dfs_region);
|
|
ath9k_ps_restore(sc);
|
|
}
|
|
|
|
/*
|
|
* This function will allocate both the DMA descriptor structure, and the
|
|
* buffers it contains. These are used to contain the descriptors used
|
|
* by the system.
|
|
*/
|
|
int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
|
|
struct list_head *head, const char *name,
|
|
int nbuf, int ndesc, bool is_tx)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
|
|
u8 *ds;
|
|
int i, bsize, desc_len;
|
|
|
|
ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n",
|
|
name, nbuf, ndesc);
|
|
|
|
INIT_LIST_HEAD(head);
|
|
|
|
if (is_tx)
|
|
desc_len = sc->sc_ah->caps.tx_desc_len;
|
|
else
|
|
desc_len = sizeof(struct ath_desc);
|
|
|
|
/* ath_desc must be a multiple of DWORDs */
|
|
if ((desc_len % 4) != 0) {
|
|
ath_err(common, "ath_desc not DWORD aligned\n");
|
|
BUG_ON((desc_len % 4) != 0);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dd->dd_desc_len = desc_len * nbuf * ndesc;
|
|
|
|
/*
|
|
* Need additional DMA memory because we can't use
|
|
* descriptors that cross the 4K page boundary. Assume
|
|
* one skipped descriptor per 4K page.
|
|
*/
|
|
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
|
|
u32 ndesc_skipped =
|
|
ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
|
|
u32 dma_len;
|
|
|
|
while (ndesc_skipped) {
|
|
dma_len = ndesc_skipped * desc_len;
|
|
dd->dd_desc_len += dma_len;
|
|
|
|
ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
|
|
}
|
|
}
|
|
|
|
/* allocate descriptors */
|
|
dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len,
|
|
&dd->dd_desc_paddr, GFP_KERNEL);
|
|
if (!dd->dd_desc)
|
|
return -ENOMEM;
|
|
|
|
ds = dd->dd_desc;
|
|
ath_dbg(common, CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
|
|
name, ds, (u32) dd->dd_desc_len,
|
|
ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
|
|
|
|
/* allocate buffers */
|
|
if (is_tx) {
|
|
struct ath_buf *bf;
|
|
|
|
bsize = sizeof(struct ath_buf) * nbuf;
|
|
bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL);
|
|
if (!bf)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) {
|
|
bf->bf_desc = ds;
|
|
bf->bf_daddr = DS2PHYS(dd, ds);
|
|
|
|
if (!(sc->sc_ah->caps.hw_caps &
|
|
ATH9K_HW_CAP_4KB_SPLITTRANS)) {
|
|
/*
|
|
* Skip descriptor addresses which can cause 4KB
|
|
* boundary crossing (addr + length) with a 32 dword
|
|
* descriptor fetch.
|
|
*/
|
|
while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
|
|
BUG_ON((caddr_t) bf->bf_desc >=
|
|
((caddr_t) dd->dd_desc +
|
|
dd->dd_desc_len));
|
|
|
|
ds += (desc_len * ndesc);
|
|
bf->bf_desc = ds;
|
|
bf->bf_daddr = DS2PHYS(dd, ds);
|
|
}
|
|
}
|
|
list_add_tail(&bf->list, head);
|
|
}
|
|
} else {
|
|
struct ath_rxbuf *bf;
|
|
|
|
bsize = sizeof(struct ath_rxbuf) * nbuf;
|
|
bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL);
|
|
if (!bf)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) {
|
|
bf->bf_desc = ds;
|
|
bf->bf_daddr = DS2PHYS(dd, ds);
|
|
|
|
if (!(sc->sc_ah->caps.hw_caps &
|
|
ATH9K_HW_CAP_4KB_SPLITTRANS)) {
|
|
/*
|
|
* Skip descriptor addresses which can cause 4KB
|
|
* boundary crossing (addr + length) with a 32 dword
|
|
* descriptor fetch.
|
|
*/
|
|
while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
|
|
BUG_ON((caddr_t) bf->bf_desc >=
|
|
((caddr_t) dd->dd_desc +
|
|
dd->dd_desc_len));
|
|
|
|
ds += (desc_len * ndesc);
|
|
bf->bf_desc = ds;
|
|
bf->bf_daddr = DS2PHYS(dd, ds);
|
|
}
|
|
}
|
|
list_add_tail(&bf->list, head);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ath9k_init_queues(struct ath_softc *sc)
|
|
{
|
|
int i = 0;
|
|
|
|
sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah);
|
|
sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
|
|
ath_cabq_update(sc);
|
|
|
|
sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0);
|
|
|
|
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
|
|
sc->tx.txq_map[i] = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, i);
|
|
sc->tx.txq_map[i]->mac80211_qnum = i;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ath9k_init_misc(struct ath_softc *sc)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
|
|
int i = 0;
|
|
|
|
timer_setup(&common->ani.timer, ath_ani_calibrate, 0);
|
|
|
|
common->last_rssi = ATH_RSSI_DUMMY_MARKER;
|
|
memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
|
|
sc->beacon.slottime = 9;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++)
|
|
sc->beacon.bslot[i] = NULL;
|
|
|
|
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)
|
|
sc->ant_comb.count = ATH_ANT_DIV_COMB_INIT_COUNT;
|
|
|
|
sc->spec_priv.ah = sc->sc_ah;
|
|
sc->spec_priv.spec_config.enabled = 0;
|
|
sc->spec_priv.spec_config.short_repeat = true;
|
|
sc->spec_priv.spec_config.count = 8;
|
|
sc->spec_priv.spec_config.endless = false;
|
|
sc->spec_priv.spec_config.period = 0xFF;
|
|
sc->spec_priv.spec_config.fft_period = 0xF;
|
|
}
|
|
|
|
static void ath9k_init_pcoem_platform(struct ath_softc *sc)
|
|
{
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath9k_hw_capabilities *pCap = &ah->caps;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
if (!IS_ENABLED(CONFIG_ATH9K_PCOEM))
|
|
return;
|
|
|
|
if (common->bus_ops->ath_bus_type != ATH_PCI)
|
|
return;
|
|
|
|
if (sc->driver_data & (ATH9K_PCI_CUS198 |
|
|
ATH9K_PCI_CUS230)) {
|
|
ah->config.xlna_gpio = 9;
|
|
ah->config.xatten_margin_cfg = true;
|
|
ah->config.alt_mingainidx = true;
|
|
ah->config.ant_ctrl_comm2g_switch_enable = 0x000BBB88;
|
|
sc->ant_comb.low_rssi_thresh = 20;
|
|
sc->ant_comb.fast_div_bias = 3;
|
|
|
|
ath_info(common, "Set parameters for %s\n",
|
|
(sc->driver_data & ATH9K_PCI_CUS198) ?
|
|
"CUS198" : "CUS230");
|
|
}
|
|
|
|
if (sc->driver_data & ATH9K_PCI_CUS217)
|
|
ath_info(common, "CUS217 card detected\n");
|
|
|
|
if (sc->driver_data & ATH9K_PCI_CUS252)
|
|
ath_info(common, "CUS252 card detected\n");
|
|
|
|
if (sc->driver_data & ATH9K_PCI_AR9565_1ANT)
|
|
ath_info(common, "WB335 1-ANT card detected\n");
|
|
|
|
if (sc->driver_data & ATH9K_PCI_AR9565_2ANT)
|
|
ath_info(common, "WB335 2-ANT card detected\n");
|
|
|
|
if (sc->driver_data & ATH9K_PCI_KILLER)
|
|
ath_info(common, "Killer Wireless card detected\n");
|
|
|
|
/*
|
|
* Some WB335 cards do not support antenna diversity. Since
|
|
* we use a hardcoded value for AR9565 instead of using the
|
|
* EEPROM/OTP data, remove the combining feature from
|
|
* the HW capabilities bitmap.
|
|
*/
|
|
if (sc->driver_data & (ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_AR9565_2ANT)) {
|
|
if (!(sc->driver_data & ATH9K_PCI_BT_ANT_DIV))
|
|
pCap->hw_caps &= ~ATH9K_HW_CAP_ANT_DIV_COMB;
|
|
}
|
|
|
|
if (sc->driver_data & ATH9K_PCI_BT_ANT_DIV) {
|
|
pCap->hw_caps |= ATH9K_HW_CAP_BT_ANT_DIV;
|
|
ath_info(common, "Set BT/WLAN RX diversity capability\n");
|
|
}
|
|
|
|
if (sc->driver_data & ATH9K_PCI_D3_L1_WAR) {
|
|
ah->config.pcie_waen = 0x0040473b;
|
|
ath_info(common, "Enable WAR for ASPM D3/L1\n");
|
|
}
|
|
|
|
/*
|
|
* The default value of pll_pwrsave is 1.
|
|
* For certain AR9485 cards, it is set to 0.
|
|
* For AR9462, AR9565 it's set to 7.
|
|
*/
|
|
ah->config.pll_pwrsave = 1;
|
|
|
|
if (sc->driver_data & ATH9K_PCI_NO_PLL_PWRSAVE) {
|
|
ah->config.pll_pwrsave = 0;
|
|
ath_info(common, "Disable PLL PowerSave\n");
|
|
}
|
|
|
|
if (sc->driver_data & ATH9K_PCI_LED_ACT_HI)
|
|
ah->config.led_active_high = true;
|
|
}
|
|
|
|
static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob,
|
|
void *ctx)
|
|
{
|
|
struct ath9k_eeprom_ctx *ec = ctx;
|
|
|
|
if (eeprom_blob)
|
|
ec->ah->eeprom_blob = eeprom_blob;
|
|
|
|
complete(&ec->complete);
|
|
}
|
|
|
|
static int ath9k_eeprom_request(struct ath_softc *sc, const char *name)
|
|
{
|
|
struct ath9k_eeprom_ctx ec;
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
int err;
|
|
|
|
/* try to load the EEPROM content asynchronously */
|
|
init_completion(&ec.complete);
|
|
ec.ah = sc->sc_ah;
|
|
|
|
err = request_firmware_nowait(THIS_MODULE, 1, name, sc->dev, GFP_KERNEL,
|
|
&ec, ath9k_eeprom_request_cb);
|
|
if (err < 0) {
|
|
ath_err(ath9k_hw_common(ah),
|
|
"EEPROM request failed\n");
|
|
return err;
|
|
}
|
|
|
|
wait_for_completion(&ec.complete);
|
|
|
|
if (!ah->eeprom_blob) {
|
|
ath_err(ath9k_hw_common(ah),
|
|
"Unable to load EEPROM file %s\n", name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath9k_eeprom_release(struct ath_softc *sc)
|
|
{
|
|
release_firmware(sc->sc_ah->eeprom_blob);
|
|
}
|
|
|
|
static int ath9k_init_platform(struct ath_softc *sc)
|
|
{
|
|
struct ath9k_platform_data *pdata = sc->dev->platform_data;
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
int ret;
|
|
|
|
if (!pdata)
|
|
return 0;
|
|
|
|
if (!pdata->use_eeprom) {
|
|
ah->ah_flags &= ~AH_USE_EEPROM;
|
|
ah->gpio_mask = pdata->gpio_mask;
|
|
ah->gpio_val = pdata->gpio_val;
|
|
ah->led_pin = pdata->led_pin;
|
|
ah->is_clk_25mhz = pdata->is_clk_25mhz;
|
|
ah->get_mac_revision = pdata->get_mac_revision;
|
|
ah->external_reset = pdata->external_reset;
|
|
ah->disable_2ghz = pdata->disable_2ghz;
|
|
ah->disable_5ghz = pdata->disable_5ghz;
|
|
|
|
if (!pdata->endian_check)
|
|
ah->ah_flags |= AH_NO_EEP_SWAP;
|
|
}
|
|
|
|
if (pdata->eeprom_name) {
|
|
ret = ath9k_eeprom_request(sc, pdata->eeprom_name);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (pdata->led_active_high)
|
|
ah->config.led_active_high = true;
|
|
|
|
if (pdata->tx_gain_buffalo)
|
|
ah->config.tx_gain_buffalo = true;
|
|
|
|
if (pdata->macaddr)
|
|
ether_addr_copy(common->macaddr, pdata->macaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath9k_of_init(struct ath_softc *sc)
|
|
{
|
|
struct device_node *np = sc->dev->of_node;
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
enum ath_bus_type bus_type = common->bus_ops->ath_bus_type;
|
|
const char *mac;
|
|
char eeprom_name[100];
|
|
int ret;
|
|
|
|
if (!of_device_is_available(np))
|
|
return 0;
|
|
|
|
ath_dbg(common, CONFIG, "parsing configuration from OF node\n");
|
|
|
|
if (of_property_read_bool(np, "qca,no-eeprom")) {
|
|
/* ath9k-eeprom-<bus>-<id>.bin */
|
|
scnprintf(eeprom_name, sizeof(eeprom_name),
|
|
"ath9k-eeprom-%s-%s.bin",
|
|
ath_bus_type_to_string(bus_type), dev_name(ah->dev));
|
|
|
|
ret = ath9k_eeprom_request(sc, eeprom_name);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mac = of_get_mac_address(np);
|
|
if (mac)
|
|
ether_addr_copy(common->macaddr, mac);
|
|
|
|
ah->ah_flags &= ~AH_USE_EEPROM;
|
|
ah->ah_flags |= AH_NO_EEP_SWAP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
|
|
const struct ath_bus_ops *bus_ops)
|
|
{
|
|
struct ath_hw *ah = NULL;
|
|
struct ath9k_hw_capabilities *pCap;
|
|
struct ath_common *common;
|
|
int ret = 0, i;
|
|
int csz = 0;
|
|
|
|
ah = devm_kzalloc(sc->dev, sizeof(struct ath_hw), GFP_KERNEL);
|
|
if (!ah)
|
|
return -ENOMEM;
|
|
|
|
ah->dev = sc->dev;
|
|
ah->hw = sc->hw;
|
|
ah->hw_version.devid = devid;
|
|
ah->ah_flags |= AH_USE_EEPROM;
|
|
ah->led_pin = -1;
|
|
ah->reg_ops.read = ath9k_ioread32;
|
|
ah->reg_ops.multi_read = ath9k_multi_ioread32;
|
|
ah->reg_ops.write = ath9k_iowrite32;
|
|
ah->reg_ops.rmw = ath9k_reg_rmw;
|
|
pCap = &ah->caps;
|
|
|
|
common = ath9k_hw_common(ah);
|
|
|
|
/* Will be cleared in ath9k_start() */
|
|
set_bit(ATH_OP_INVALID, &common->op_flags);
|
|
sc->airtime_flags = (AIRTIME_USE_TX | AIRTIME_USE_RX |
|
|
AIRTIME_USE_NEW_QUEUES);
|
|
|
|
sc->sc_ah = ah;
|
|
sc->dfs_detector = dfs_pattern_detector_init(common, NL80211_DFS_UNSET);
|
|
sc->tx99_power = MAX_RATE_POWER + 1;
|
|
init_waitqueue_head(&sc->tx_wait);
|
|
sc->cur_chan = &sc->chanctx[0];
|
|
if (!ath9k_is_chanctx_enabled())
|
|
sc->cur_chan->hw_queue_base = 0;
|
|
|
|
common->ops = &ah->reg_ops;
|
|
common->bus_ops = bus_ops;
|
|
common->ps_ops = &ath9k_ps_ops;
|
|
common->ah = ah;
|
|
common->hw = sc->hw;
|
|
common->priv = sc;
|
|
common->debug_mask = ath9k_debug;
|
|
common->btcoex_enabled = ath9k_btcoex_enable == 1;
|
|
common->disable_ani = false;
|
|
|
|
/*
|
|
* Platform quirks.
|
|
*/
|
|
ath9k_init_pcoem_platform(sc);
|
|
|
|
ret = ath9k_init_platform(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ath9k_of_init(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ath9k_led_active_high != -1)
|
|
ah->config.led_active_high = ath9k_led_active_high == 1;
|
|
|
|
/*
|
|
* Enable WLAN/BT RX Antenna diversity only when:
|
|
*
|
|
* - BTCOEX is disabled.
|
|
* - the user manually requests the feature.
|
|
* - the HW cap is set using the platform data.
|
|
*/
|
|
if (!common->btcoex_enabled && ath9k_bt_ant_diversity &&
|
|
(pCap->hw_caps & ATH9K_HW_CAP_BT_ANT_DIV))
|
|
common->bt_ant_diversity = 1;
|
|
|
|
spin_lock_init(&common->cc_lock);
|
|
spin_lock_init(&sc->intr_lock);
|
|
spin_lock_init(&sc->sc_serial_rw);
|
|
spin_lock_init(&sc->sc_pm_lock);
|
|
spin_lock_init(&sc->chan_lock);
|
|
mutex_init(&sc->mutex);
|
|
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
|
|
tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
|
|
(unsigned long)sc);
|
|
|
|
timer_setup(&sc->sleep_timer, ath_ps_full_sleep, 0);
|
|
INIT_WORK(&sc->hw_reset_work, ath_reset_work);
|
|
INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
|
|
INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
|
|
INIT_DELAYED_WORK(&sc->hw_check_work, ath_hw_check_work);
|
|
|
|
ath9k_init_channel_context(sc);
|
|
|
|
/*
|
|
* Cache line size is used to size and align various
|
|
* structures used to communicate with the hardware.
|
|
*/
|
|
ath_read_cachesize(common, &csz);
|
|
common->cachelsz = csz << 2; /* convert to bytes */
|
|
|
|
/* Initializes the hardware for all supported chipsets */
|
|
ret = ath9k_hw_init(ah);
|
|
if (ret)
|
|
goto err_hw;
|
|
|
|
ret = ath9k_init_queues(sc);
|
|
if (ret)
|
|
goto err_queues;
|
|
|
|
ret = ath9k_init_btcoex(sc);
|
|
if (ret)
|
|
goto err_btcoex;
|
|
|
|
ret = ath9k_cmn_init_channels_rates(common);
|
|
if (ret)
|
|
goto err_btcoex;
|
|
|
|
ret = ath9k_init_p2p(sc);
|
|
if (ret)
|
|
goto err_btcoex;
|
|
|
|
ath9k_cmn_init_crypto(sc->sc_ah);
|
|
ath9k_init_misc(sc);
|
|
ath_chanctx_init(sc);
|
|
ath9k_offchannel_init(sc);
|
|
|
|
if (common->bus_ops->aspm_init)
|
|
common->bus_ops->aspm_init(common);
|
|
|
|
return 0;
|
|
|
|
err_btcoex:
|
|
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
|
|
if (ATH_TXQ_SETUP(sc, i))
|
|
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
|
|
err_queues:
|
|
ath9k_hw_deinit(ah);
|
|
err_hw:
|
|
ath9k_eeprom_release(sc);
|
|
dev_kfree_skb_any(sc->tx99_skb);
|
|
return ret;
|
|
}
|
|
|
|
static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
|
|
{
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_channel *chan;
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct cfg80211_chan_def chandef;
|
|
int i;
|
|
|
|
sband = &common->sbands[band];
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
chan = &sband->channels[i];
|
|
ah->curchan = &ah->channels[chan->hw_value];
|
|
cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20);
|
|
ath9k_cmn_get_channel(sc->hw, ah, &chandef);
|
|
ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true);
|
|
}
|
|
}
|
|
|
|
static void ath9k_init_txpower_limits(struct ath_softc *sc)
|
|
{
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath9k_channel *curchan = ah->curchan;
|
|
|
|
if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
|
|
ath9k_init_band_txpower(sc, NL80211_BAND_2GHZ);
|
|
if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
|
|
ath9k_init_band_txpower(sc, NL80211_BAND_5GHZ);
|
|
|
|
ah->curchan = curchan;
|
|
}
|
|
|
|
static const struct ieee80211_iface_limit if_limits[] = {
|
|
{ .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) },
|
|
{ .max = 8, .types =
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
BIT(NL80211_IFTYPE_MESH_POINT) |
|
|
#endif
|
|
BIT(NL80211_IFTYPE_AP) },
|
|
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO) },
|
|
};
|
|
|
|
#ifdef CONFIG_WIRELESS_WDS
|
|
static const struct ieee80211_iface_limit wds_limits[] = {
|
|
{ .max = 2048, .types = BIT(NL80211_IFTYPE_WDS) },
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
|
|
|
|
static const struct ieee80211_iface_limit if_limits_multi[] = {
|
|
{ .max = 2, .types = BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_AP) |
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO) },
|
|
{ .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
|
|
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) },
|
|
};
|
|
|
|
static const struct ieee80211_iface_combination if_comb_multi[] = {
|
|
{
|
|
.limits = if_limits_multi,
|
|
.n_limits = ARRAY_SIZE(if_limits_multi),
|
|
.max_interfaces = 3,
|
|
.num_different_channels = 2,
|
|
.beacon_int_infra_match = true,
|
|
},
|
|
};
|
|
|
|
#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
|
|
|
|
static const struct ieee80211_iface_combination if_comb[] = {
|
|
{
|
|
.limits = if_limits,
|
|
.n_limits = ARRAY_SIZE(if_limits),
|
|
.max_interfaces = 2048,
|
|
.num_different_channels = 1,
|
|
.beacon_int_infra_match = true,
|
|
#ifdef CONFIG_ATH9K_DFS_CERTIFIED
|
|
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
|
|
BIT(NL80211_CHAN_WIDTH_20) |
|
|
BIT(NL80211_CHAN_WIDTH_40),
|
|
#endif
|
|
},
|
|
#ifdef CONFIG_WIRELESS_WDS
|
|
{
|
|
.limits = wds_limits,
|
|
.n_limits = ARRAY_SIZE(wds_limits),
|
|
.max_interfaces = 2048,
|
|
.num_different_channels = 1,
|
|
.beacon_int_infra_match = true,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
|
|
static void ath9k_set_mcc_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
|
|
{
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
if (!ath9k_is_chanctx_enabled())
|
|
return;
|
|
|
|
ieee80211_hw_set(hw, QUEUE_CONTROL);
|
|
hw->queues = ATH9K_NUM_TX_QUEUES;
|
|
hw->offchannel_tx_hw_queue = hw->queues - 1;
|
|
hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
|
|
hw->wiphy->iface_combinations = if_comb_multi;
|
|
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
|
|
hw->wiphy->max_scan_ssids = 255;
|
|
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
|
|
hw->wiphy->max_remain_on_channel_duration = 10000;
|
|
hw->chanctx_data_size = sizeof(void *);
|
|
hw->extra_beacon_tailroom =
|
|
sizeof(struct ieee80211_p2p_noa_attr) + 9;
|
|
|
|
ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
|
|
}
|
|
#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
|
|
|
|
static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
|
|
{
|
|
struct ath_hw *ah = sc->sc_ah;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
|
|
ieee80211_hw_set(hw, SUPPORTS_RC_TABLE);
|
|
ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
|
|
ieee80211_hw_set(hw, SPECTRUM_MGMT);
|
|
ieee80211_hw_set(hw, PS_NULLFUNC_STACK);
|
|
ieee80211_hw_set(hw, SIGNAL_DBM);
|
|
ieee80211_hw_set(hw, RX_INCLUDES_FCS);
|
|
ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
|
|
ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
|
|
ieee80211_hw_set(hw, SUPPORTS_CLONED_SKBS);
|
|
|
|
if (ath9k_ps_enable)
|
|
ieee80211_hw_set(hw, SUPPORTS_PS);
|
|
|
|
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
|
|
ieee80211_hw_set(hw, AMPDU_AGGREGATION);
|
|
|
|
if (AR_SREV_9280_20_OR_LATER(ah))
|
|
hw->radiotap_mcs_details |=
|
|
IEEE80211_RADIOTAP_MCS_HAVE_STBC;
|
|
}
|
|
|
|
if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || ath9k_modparam_nohwcrypt)
|
|
ieee80211_hw_set(hw, MFP_CAPABLE);
|
|
|
|
hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR |
|
|
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
|
|
NL80211_FEATURE_P2P_GO_CTWIN;
|
|
|
|
if (!IS_ENABLED(CONFIG_ATH9K_TX99)) {
|
|
hw->wiphy->interface_modes =
|
|
BIT(NL80211_IFTYPE_P2P_GO) |
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_AP) |
|
|
BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_ADHOC) |
|
|
BIT(NL80211_IFTYPE_MESH_POINT) |
|
|
#ifdef CONFIG_WIRELESS_WDS
|
|
BIT(NL80211_IFTYPE_WDS) |
|
|
#endif
|
|
BIT(NL80211_IFTYPE_OCB);
|
|
|
|
if (ath9k_is_chanctx_enabled())
|
|
hw->wiphy->interface_modes |=
|
|
BIT(NL80211_IFTYPE_P2P_DEVICE);
|
|
|
|
hw->wiphy->iface_combinations = if_comb;
|
|
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
|
|
}
|
|
|
|
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
|
|
|
|
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
|
|
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
|
|
hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
|
|
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
|
|
hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
|
|
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
|
|
|
|
hw->queues = 4;
|
|
hw->max_rates = 4;
|
|
hw->max_listen_interval = 10;
|
|
hw->max_rate_tries = 10;
|
|
hw->sta_data_size = sizeof(struct ath_node);
|
|
hw->vif_data_size = sizeof(struct ath_vif);
|
|
hw->txq_data_size = sizeof(struct ath_atx_tid);
|
|
hw->extra_tx_headroom = 4;
|
|
|
|
hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
|
|
hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
|
|
|
|
/* single chain devices with rx diversity */
|
|
if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)
|
|
hw->wiphy->available_antennas_rx = BIT(0) | BIT(1);
|
|
|
|
sc->ant_rx = hw->wiphy->available_antennas_rx;
|
|
sc->ant_tx = hw->wiphy->available_antennas_tx;
|
|
|
|
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
|
|
hw->wiphy->bands[NL80211_BAND_2GHZ] =
|
|
&common->sbands[NL80211_BAND_2GHZ];
|
|
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
|
|
hw->wiphy->bands[NL80211_BAND_5GHZ] =
|
|
&common->sbands[NL80211_BAND_5GHZ];
|
|
|
|
#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
|
|
ath9k_set_mcc_capab(sc, hw);
|
|
#endif
|
|
ath9k_init_wow(hw);
|
|
ath9k_cmn_reload_chainmask(ah);
|
|
|
|
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
|
|
|
|
wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
|
|
}
|
|
|
|
int ath9k_init_device(u16 devid, struct ath_softc *sc,
|
|
const struct ath_bus_ops *bus_ops)
|
|
{
|
|
struct ieee80211_hw *hw = sc->hw;
|
|
struct ath_common *common;
|
|
struct ath_hw *ah;
|
|
int error = 0;
|
|
struct ath_regulatory *reg;
|
|
|
|
/* Bring up device */
|
|
error = ath9k_init_softc(devid, sc, bus_ops);
|
|
if (error)
|
|
return error;
|
|
|
|
ah = sc->sc_ah;
|
|
common = ath9k_hw_common(ah);
|
|
ath9k_set_hw_capab(sc, hw);
|
|
|
|
/* Initialize regulatory */
|
|
error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
|
|
ath9k_reg_notifier);
|
|
if (error)
|
|
goto deinit;
|
|
|
|
reg = &common->regulatory;
|
|
|
|
/* Setup TX DMA */
|
|
error = ath_tx_init(sc, ATH_TXBUF);
|
|
if (error != 0)
|
|
goto deinit;
|
|
|
|
/* Setup RX DMA */
|
|
error = ath_rx_init(sc, ATH_RXBUF);
|
|
if (error != 0)
|
|
goto deinit;
|
|
|
|
ath9k_init_txpower_limits(sc);
|
|
|
|
#ifdef CONFIG_MAC80211_LEDS
|
|
/* must be initialized before ieee80211_register_hw */
|
|
sc->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(sc->hw,
|
|
IEEE80211_TPT_LEDTRIG_FL_RADIO, ath9k_tpt_blink,
|
|
ARRAY_SIZE(ath9k_tpt_blink));
|
|
#endif
|
|
|
|
/* Register with mac80211 */
|
|
error = ieee80211_register_hw(hw);
|
|
if (error)
|
|
goto rx_cleanup;
|
|
|
|
error = ath9k_init_debug(ah);
|
|
if (error) {
|
|
ath_err(common, "Unable to create debugfs files\n");
|
|
goto unregister;
|
|
}
|
|
|
|
/* Handle world regulatory */
|
|
if (!ath_is_world_regd(reg)) {
|
|
error = regulatory_hint(hw->wiphy, reg->alpha2);
|
|
if (error)
|
|
goto debug_cleanup;
|
|
}
|
|
|
|
ath_init_leds(sc);
|
|
ath_start_rfkill_poll(sc);
|
|
|
|
return 0;
|
|
|
|
debug_cleanup:
|
|
ath9k_deinit_debug(sc);
|
|
unregister:
|
|
ieee80211_unregister_hw(hw);
|
|
rx_cleanup:
|
|
ath_rx_cleanup(sc);
|
|
deinit:
|
|
ath9k_deinit_softc(sc);
|
|
return error;
|
|
}
|
|
|
|
/*****************************/
|
|
/* De-Initialization */
|
|
/*****************************/
|
|
|
|
static void ath9k_deinit_softc(struct ath_softc *sc)
|
|
{
|
|
int i = 0;
|
|
|
|
ath9k_deinit_p2p(sc);
|
|
ath9k_deinit_btcoex(sc);
|
|
|
|
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
|
|
if (ATH_TXQ_SETUP(sc, i))
|
|
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
|
|
|
|
del_timer_sync(&sc->sleep_timer);
|
|
ath9k_hw_deinit(sc->sc_ah);
|
|
if (sc->dfs_detector != NULL)
|
|
sc->dfs_detector->exit(sc->dfs_detector);
|
|
|
|
ath9k_eeprom_release(sc);
|
|
}
|
|
|
|
void ath9k_deinit_device(struct ath_softc *sc)
|
|
{
|
|
struct ieee80211_hw *hw = sc->hw;
|
|
|
|
ath9k_ps_wakeup(sc);
|
|
|
|
wiphy_rfkill_stop_polling(sc->hw->wiphy);
|
|
ath_deinit_leds(sc);
|
|
|
|
ath9k_ps_restore(sc);
|
|
|
|
ath9k_deinit_debug(sc);
|
|
ath9k_deinit_wow(hw);
|
|
ieee80211_unregister_hw(hw);
|
|
ath_rx_cleanup(sc);
|
|
ath9k_deinit_softc(sc);
|
|
}
|
|
|
|
/************************/
|
|
/* Module Hooks */
|
|
/************************/
|
|
|
|
static int __init ath9k_init(void)
|
|
{
|
|
int error;
|
|
|
|
error = ath_pci_init();
|
|
if (error < 0) {
|
|
pr_err("No PCI devices found, driver not installed\n");
|
|
error = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
error = ath_ahb_init();
|
|
if (error < 0) {
|
|
error = -ENODEV;
|
|
goto err_pci_exit;
|
|
}
|
|
|
|
dmi_check_system(ath9k_quirks);
|
|
|
|
return 0;
|
|
|
|
err_pci_exit:
|
|
ath_pci_exit();
|
|
err_out:
|
|
return error;
|
|
}
|
|
module_init(ath9k_init);
|
|
|
|
static void __exit ath9k_exit(void)
|
|
{
|
|
is_ath9k_unloaded = true;
|
|
ath_ahb_exit();
|
|
ath_pci_exit();
|
|
pr_info("%s: Driver unloaded\n", dev_info);
|
|
}
|
|
module_exit(ath9k_exit);
|