mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
e72838d47d
Add support for probing the jz4740-musb driver on the JZ4770 SoC. The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740, but it features more endpoints, and officially supports OTG. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
298 lines
7.7 KiB
C
298 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Ingenic JZ4740 "glue layer"
|
|
*
|
|
* Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/role.h>
|
|
#include <linux/usb/usb_phy_generic.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
struct jz4740_glue {
|
|
struct platform_device *pdev;
|
|
struct musb *musb;
|
|
struct clk *clk;
|
|
struct usb_role_switch *role_sw;
|
|
};
|
|
|
|
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
|
|
{
|
|
unsigned long flags;
|
|
irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
|
|
struct musb *musb = __hci;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
|
|
retval_dma = dma_controller_irq(irq, musb->dma_controller);
|
|
|
|
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
|
|
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
|
|
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
|
|
|
|
/*
|
|
* The controller is gadget only, the state of the host mode IRQ bits is
|
|
* undefined. Mask them to make sure that the musb driver core will
|
|
* never see them set
|
|
*/
|
|
musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
|
|
MUSB_INTR_RESET | MUSB_INTR_SOF;
|
|
|
|
if (musb->int_usb || musb->int_tx || musb->int_rx)
|
|
retval = musb_interrupt(musb);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
|
|
return IRQ_HANDLED;
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
|
|
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
|
|
};
|
|
|
|
static const struct musb_hdrc_config jz4740_musb_config = {
|
|
/* Silicon does not implement USB OTG. */
|
|
.multipoint = 0,
|
|
/* Max EPs scanned, driver will decide which EP can be used. */
|
|
.num_eps = 4,
|
|
/* RAMbits needed to configure EPs from table */
|
|
.ram_bits = 9,
|
|
.fifo_cfg = jz4740_musb_fifo_cfg,
|
|
.fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
|
|
};
|
|
|
|
static int jz4740_musb_role_switch_set(struct usb_role_switch *sw,
|
|
enum usb_role role)
|
|
{
|
|
struct jz4740_glue *glue = usb_role_switch_get_drvdata(sw);
|
|
struct usb_phy *phy = glue->musb->xceiv;
|
|
|
|
switch (role) {
|
|
case USB_ROLE_NONE:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_NONE, phy);
|
|
break;
|
|
case USB_ROLE_DEVICE:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_VBUS, phy);
|
|
break;
|
|
case USB_ROLE_HOST:
|
|
atomic_notifier_call_chain(&phy->notifier, USB_EVENT_ID, phy);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_musb_init(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller->parent;
|
|
struct jz4740_glue *glue = dev_get_drvdata(dev);
|
|
struct usb_role_switch_desc role_sw_desc = {
|
|
.set = jz4740_musb_role_switch_set,
|
|
.driver_data = glue,
|
|
.fwnode = dev_fwnode(dev),
|
|
};
|
|
int err;
|
|
|
|
glue->musb = musb;
|
|
|
|
if (dev->of_node)
|
|
musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
|
|
else
|
|
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR(musb->xceiv)) {
|
|
err = PTR_ERR(musb->xceiv);
|
|
if (err != -EPROBE_DEFER)
|
|
dev_err(dev, "No transceiver configured: %d", err);
|
|
return err;
|
|
}
|
|
|
|
glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
|
|
if (IS_ERR(glue->role_sw)) {
|
|
dev_err(dev, "Failed to register USB role switch");
|
|
return PTR_ERR(glue->role_sw);
|
|
}
|
|
|
|
/*
|
|
* Silicon does not implement ConfigData register.
|
|
* Set dyn_fifo to avoid reading EP config from hardware.
|
|
*/
|
|
musb->dyn_fifo = true;
|
|
|
|
musb->isr = jz4740_musb_interrupt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4740_musb_exit(struct musb *musb)
|
|
{
|
|
struct jz4740_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
|
|
usb_role_switch_unregister(glue->role_sw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct musb_platform_ops jz4740_musb_ops = {
|
|
.quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
|
|
.fifo_mode = 2,
|
|
.init = jz4740_musb_init,
|
|
.exit = jz4740_musb_exit,
|
|
#ifdef CONFIG_USB_INVENTRA_DMA
|
|
.dma_init = musbhs_dma_controller_create_noirq,
|
|
.dma_exit = musbhs_dma_controller_destroy,
|
|
#endif
|
|
};
|
|
|
|
static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
|
|
.mode = MUSB_PERIPHERAL,
|
|
.config = &jz4740_musb_config,
|
|
.platform_ops = &jz4740_musb_ops,
|
|
};
|
|
|
|
static struct musb_fifo_cfg jz4770_musb_fifo_cfg[] = {
|
|
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
|
|
{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
|
|
};
|
|
|
|
static struct musb_hdrc_config jz4770_musb_config = {
|
|
.multipoint = 1,
|
|
.num_eps = 11,
|
|
.ram_bits = 11,
|
|
.fifo_cfg = jz4770_musb_fifo_cfg,
|
|
.fifo_cfg_size = ARRAY_SIZE(jz4770_musb_fifo_cfg),
|
|
};
|
|
|
|
static const struct musb_hdrc_platform_data jz4770_musb_pdata = {
|
|
.mode = MUSB_PERIPHERAL, /* TODO: support OTG */
|
|
.config = &jz4770_musb_config,
|
|
.platform_ops = &jz4740_musb_ops,
|
|
};
|
|
|
|
static int jz4740_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct musb_hdrc_platform_data *pdata;
|
|
struct platform_device *musb;
|
|
struct jz4740_glue *glue;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue)
|
|
return -ENOMEM;
|
|
|
|
pdata = of_device_get_match_data(dev);
|
|
if (!pdata) {
|
|
dev_err(dev, "missing platform data");
|
|
return -EINVAL;
|
|
}
|
|
|
|
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
|
|
if (!musb) {
|
|
dev_err(dev, "failed to allocate musb device");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
clk = devm_clk_get(dev, "udc");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to get clock");
|
|
ret = PTR_ERR(clk);
|
|
goto err_platform_device_put;
|
|
}
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock");
|
|
goto err_platform_device_put;
|
|
}
|
|
|
|
musb->dev.parent = dev;
|
|
musb->dev.dma_mask = &musb->dev.coherent_dma_mask;
|
|
musb->dev.coherent_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
glue->pdev = musb;
|
|
glue->clk = clk;
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
ret = platform_device_add_resources(musb, pdev->resource,
|
|
pdev->num_resources);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add resources");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
|
|
if (ret) {
|
|
dev_err(dev, "failed to add platform_data");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register musb device");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk_disable:
|
|
clk_disable_unprepare(clk);
|
|
err_platform_device_put:
|
|
platform_device_put(musb);
|
|
return ret;
|
|
}
|
|
|
|
static int jz4740_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz4740_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(glue->pdev);
|
|
clk_disable_unprepare(glue->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id jz4740_musb_of_match[] = {
|
|
{ .compatible = "ingenic,jz4740-musb", .data = &jz4740_musb_pdata },
|
|
{ .compatible = "ingenic,jz4770-musb", .data = &jz4770_musb_pdata },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
|
|
|
|
static struct platform_driver jz4740_driver = {
|
|
.probe = jz4740_probe,
|
|
.remove = jz4740_remove,
|
|
.driver = {
|
|
.name = "musb-jz4740",
|
|
.of_match_table = jz4740_musb_of_match,
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
|
|
MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
|
|
MODULE_LICENSE("GPL v2");
|
|
module_platform_driver(jz4740_driver);
|