mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
d50d7ac08b
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
871 lines
17 KiB
C
871 lines
17 KiB
C
/*
|
|
* S6E63M0 AMOLED LCD panel driver.
|
|
*
|
|
* Author: InKi Dae <inki.dae@samsung.com>
|
|
*
|
|
* Derived from drivers/video/omap/lcd-apollon.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include "s6e63m0_gamma.h"
|
|
|
|
#define SLEEPMSEC 0x1000
|
|
#define ENDDEF 0x2000
|
|
#define DEFMASK 0xFF00
|
|
#define COMMAND_ONLY 0xFE
|
|
#define DATA_ONLY 0xFF
|
|
|
|
#define MIN_BRIGHTNESS 0
|
|
#define MAX_BRIGHTNESS 10
|
|
|
|
struct s6e63m0 {
|
|
struct device *dev;
|
|
struct spi_device *spi;
|
|
unsigned int power;
|
|
unsigned int current_brightness;
|
|
unsigned int gamma_mode;
|
|
unsigned int gamma_table_count;
|
|
struct lcd_device *ld;
|
|
struct backlight_device *bd;
|
|
struct lcd_platform_data *lcd_pd;
|
|
};
|
|
|
|
static const unsigned short seq_panel_condition_set[] = {
|
|
0xF8, 0x01,
|
|
DATA_ONLY, 0x27,
|
|
DATA_ONLY, 0x27,
|
|
DATA_ONLY, 0x07,
|
|
DATA_ONLY, 0x07,
|
|
DATA_ONLY, 0x54,
|
|
DATA_ONLY, 0x9f,
|
|
DATA_ONLY, 0x63,
|
|
DATA_ONLY, 0x86,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x33,
|
|
DATA_ONLY, 0x0d,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_display_condition_set[] = {
|
|
0xf2, 0x02,
|
|
DATA_ONLY, 0x03,
|
|
DATA_ONLY, 0x1c,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x10,
|
|
|
|
0xf7, 0x03,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_gamma_setting[] = {
|
|
0xfa, 0x00,
|
|
DATA_ONLY, 0x18,
|
|
DATA_ONLY, 0x08,
|
|
DATA_ONLY, 0x24,
|
|
DATA_ONLY, 0x64,
|
|
DATA_ONLY, 0x56,
|
|
DATA_ONLY, 0x33,
|
|
DATA_ONLY, 0xb6,
|
|
DATA_ONLY, 0xba,
|
|
DATA_ONLY, 0xa8,
|
|
DATA_ONLY, 0xac,
|
|
DATA_ONLY, 0xb1,
|
|
DATA_ONLY, 0x9d,
|
|
DATA_ONLY, 0xc1,
|
|
DATA_ONLY, 0xc1,
|
|
DATA_ONLY, 0xb7,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x9c,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x9f,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0xd6,
|
|
|
|
0xfa, 0x01,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_etc_condition_set[] = {
|
|
0xf6, 0x00,
|
|
DATA_ONLY, 0x8c,
|
|
DATA_ONLY, 0x07,
|
|
|
|
0xb3, 0xc,
|
|
|
|
0xb5, 0x2c,
|
|
DATA_ONLY, 0x12,
|
|
DATA_ONLY, 0x0c,
|
|
DATA_ONLY, 0x0a,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x0e,
|
|
DATA_ONLY, 0x17,
|
|
DATA_ONLY, 0x13,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x2a,
|
|
DATA_ONLY, 0x24,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1b,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x17,
|
|
|
|
DATA_ONLY, 0x2b,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x3a,
|
|
DATA_ONLY, 0x34,
|
|
DATA_ONLY, 0x30,
|
|
DATA_ONLY, 0x2c,
|
|
DATA_ONLY, 0x29,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x25,
|
|
DATA_ONLY, 0x23,
|
|
DATA_ONLY, 0x21,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x1e,
|
|
DATA_ONLY, 0x1e,
|
|
|
|
0xb6, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x11,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x33,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
|
|
0xb7, 0x2c,
|
|
DATA_ONLY, 0x12,
|
|
DATA_ONLY, 0x0c,
|
|
DATA_ONLY, 0x0a,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x0e,
|
|
DATA_ONLY, 0x17,
|
|
DATA_ONLY, 0x13,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x2a,
|
|
DATA_ONLY, 0x24,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1b,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x17,
|
|
|
|
DATA_ONLY, 0x2b,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x3a,
|
|
DATA_ONLY, 0x34,
|
|
DATA_ONLY, 0x30,
|
|
DATA_ONLY, 0x2c,
|
|
DATA_ONLY, 0x29,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x25,
|
|
DATA_ONLY, 0x23,
|
|
DATA_ONLY, 0x21,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x1e,
|
|
DATA_ONLY, 0x1e,
|
|
|
|
0xb8, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x11,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x33,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
|
|
0xb9, 0x2c,
|
|
DATA_ONLY, 0x12,
|
|
DATA_ONLY, 0x0c,
|
|
DATA_ONLY, 0x0a,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x0e,
|
|
DATA_ONLY, 0x17,
|
|
DATA_ONLY, 0x13,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x2a,
|
|
DATA_ONLY, 0x24,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x1b,
|
|
DATA_ONLY, 0x1a,
|
|
DATA_ONLY, 0x17,
|
|
|
|
DATA_ONLY, 0x2b,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x3a,
|
|
DATA_ONLY, 0x34,
|
|
DATA_ONLY, 0x30,
|
|
DATA_ONLY, 0x2c,
|
|
DATA_ONLY, 0x29,
|
|
DATA_ONLY, 0x26,
|
|
DATA_ONLY, 0x25,
|
|
DATA_ONLY, 0x23,
|
|
DATA_ONLY, 0x21,
|
|
DATA_ONLY, 0x20,
|
|
DATA_ONLY, 0x1e,
|
|
DATA_ONLY, 0x1e,
|
|
|
|
0xba, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x11,
|
|
DATA_ONLY, 0x22,
|
|
DATA_ONLY, 0x33,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
DATA_ONLY, 0x44,
|
|
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x55,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
DATA_ONLY, 0x66,
|
|
|
|
0xc1, 0x4d,
|
|
DATA_ONLY, 0x96,
|
|
DATA_ONLY, 0x1d,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x01,
|
|
DATA_ONLY, 0xdf,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
DATA_ONLY, 0x1f,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x00,
|
|
DATA_ONLY, 0x03,
|
|
DATA_ONLY, 0x06,
|
|
DATA_ONLY, 0x09,
|
|
DATA_ONLY, 0x0d,
|
|
DATA_ONLY, 0x0f,
|
|
DATA_ONLY, 0x12,
|
|
DATA_ONLY, 0x15,
|
|
DATA_ONLY, 0x18,
|
|
|
|
0xb2, 0x10,
|
|
DATA_ONLY, 0x10,
|
|
DATA_ONLY, 0x0b,
|
|
DATA_ONLY, 0x05,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_acl_on[] = {
|
|
/* ACL on */
|
|
0xc0, 0x01,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_acl_off[] = {
|
|
/* ACL off */
|
|
0xc0, 0x00,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_elvss_on[] = {
|
|
/* ELVSS on */
|
|
0xb1, 0x0b,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_elvss_off[] = {
|
|
/* ELVSS off */
|
|
0xb1, 0x0a,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_stand_by_off[] = {
|
|
0x11, COMMAND_ONLY,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_stand_by_on[] = {
|
|
0x10, COMMAND_ONLY,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
static const unsigned short seq_display_on[] = {
|
|
0x29, COMMAND_ONLY,
|
|
|
|
ENDDEF, 0x0000
|
|
};
|
|
|
|
|
|
static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data)
|
|
{
|
|
u16 buf[1];
|
|
struct spi_message msg;
|
|
|
|
struct spi_transfer xfer = {
|
|
.len = 2,
|
|
.tx_buf = buf,
|
|
};
|
|
|
|
buf[0] = (addr << 8) | data;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
return spi_sync(lcd->spi, &msg);
|
|
}
|
|
|
|
static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address,
|
|
unsigned char command)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (address != DATA_ONLY)
|
|
ret = s6e63m0_spi_write_byte(lcd, 0x0, address);
|
|
if (command != COMMAND_ONLY)
|
|
ret = s6e63m0_spi_write_byte(lcd, 0x1, command);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd,
|
|
const unsigned short *wbuf)
|
|
{
|
|
int ret = 0, i = 0;
|
|
|
|
while ((wbuf[i] & DEFMASK) != ENDDEF) {
|
|
if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
|
|
ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]);
|
|
if (ret)
|
|
break;
|
|
} else {
|
|
msleep(wbuf[i+1]);
|
|
}
|
|
i += 2;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma)
|
|
{
|
|
unsigned int i = 0;
|
|
int ret = 0;
|
|
|
|
/* disable gamma table updating. */
|
|
ret = s6e63m0_spi_write(lcd, 0xfa, 0x00);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to disable gamma table updating.\n");
|
|
goto gamma_err;
|
|
}
|
|
|
|
for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) {
|
|
ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to set gamma table.\n");
|
|
goto gamma_err;
|
|
}
|
|
}
|
|
|
|
/* update gamma table. */
|
|
ret = s6e63m0_spi_write(lcd, 0xfa, 0x01);
|
|
if (ret)
|
|
dev_err(lcd->dev, "failed to update gamma table.\n");
|
|
|
|
gamma_err:
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int s6e63m0_ldi_init(struct s6e63m0 *lcd)
|
|
{
|
|
int ret, i;
|
|
const unsigned short *init_seq[] = {
|
|
seq_panel_condition_set,
|
|
seq_display_condition_set,
|
|
seq_gamma_setting,
|
|
seq_etc_condition_set,
|
|
seq_acl_on,
|
|
seq_elvss_on,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
|
|
ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_ldi_enable(struct s6e63m0 *lcd)
|
|
{
|
|
int ret = 0, i;
|
|
const unsigned short *enable_seq[] = {
|
|
seq_stand_by_off,
|
|
seq_display_on,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(enable_seq); i++) {
|
|
ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_ldi_disable(struct s6e63m0 *lcd)
|
|
{
|
|
int ret;
|
|
|
|
ret = s6e63m0_panel_send_sequence(lcd, seq_stand_by_on);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_power_is_on(int power)
|
|
{
|
|
return power <= FB_BLANK_NORMAL;
|
|
}
|
|
|
|
static int s6e63m0_power_on(struct s6e63m0 *lcd)
|
|
{
|
|
int ret = 0;
|
|
struct lcd_platform_data *pd;
|
|
struct backlight_device *bd;
|
|
|
|
pd = lcd->lcd_pd;
|
|
bd = lcd->bd;
|
|
|
|
if (!pd->power_on) {
|
|
dev_err(lcd->dev, "power_on is NULL.\n");
|
|
return -EINVAL;
|
|
} else {
|
|
pd->power_on(lcd->ld, 1);
|
|
msleep(pd->power_on_delay);
|
|
}
|
|
|
|
if (!pd->reset) {
|
|
dev_err(lcd->dev, "reset is NULL.\n");
|
|
return -EINVAL;
|
|
} else {
|
|
pd->reset(lcd->ld);
|
|
msleep(pd->reset_delay);
|
|
}
|
|
|
|
ret = s6e63m0_ldi_init(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to initialize ldi.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = s6e63m0_ldi_enable(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "failed to enable ldi.\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set brightness to current value after power on or resume. */
|
|
ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "lcd gamma setting failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6e63m0_power_off(struct s6e63m0 *lcd)
|
|
{
|
|
int ret;
|
|
struct lcd_platform_data *pd;
|
|
|
|
pd = lcd->lcd_pd;
|
|
|
|
ret = s6e63m0_ldi_disable(lcd);
|
|
if (ret) {
|
|
dev_err(lcd->dev, "lcd setting failed.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
msleep(pd->power_off_delay);
|
|
|
|
pd->power_on(lcd->ld, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6e63m0_power(struct s6e63m0 *lcd, int power)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (s6e63m0_power_is_on(power) && !s6e63m0_power_is_on(lcd->power))
|
|
ret = s6e63m0_power_on(lcd);
|
|
else if (!s6e63m0_power_is_on(power) && s6e63m0_power_is_on(lcd->power))
|
|
ret = s6e63m0_power_off(lcd);
|
|
|
|
if (!ret)
|
|
lcd->power = power;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct s6e63m0 *lcd = lcd_get_data(ld);
|
|
|
|
if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
|
|
power != FB_BLANK_NORMAL) {
|
|
dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return s6e63m0_power(lcd, power);
|
|
}
|
|
|
|
static int s6e63m0_get_power(struct lcd_device *ld)
|
|
{
|
|
struct s6e63m0 *lcd = lcd_get_data(ld);
|
|
|
|
return lcd->power;
|
|
}
|
|
|
|
static int s6e63m0_get_brightness(struct backlight_device *bd)
|
|
{
|
|
return bd->props.brightness;
|
|
}
|
|
|
|
static int s6e63m0_set_brightness(struct backlight_device *bd)
|
|
{
|
|
int ret = 0, brightness = bd->props.brightness;
|
|
struct s6e63m0 *lcd = bl_get_data(bd);
|
|
|
|
if (brightness < MIN_BRIGHTNESS ||
|
|
brightness > bd->props.max_brightness) {
|
|
dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
|
|
MIN_BRIGHTNESS, MAX_BRIGHTNESS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
|
|
if (ret) {
|
|
dev_err(&bd->dev, "lcd brightness setting failed.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct lcd_ops s6e63m0_lcd_ops = {
|
|
.set_power = s6e63m0_set_power,
|
|
.get_power = s6e63m0_get_power,
|
|
};
|
|
|
|
static const struct backlight_ops s6e63m0_backlight_ops = {
|
|
.get_brightness = s6e63m0_get_brightness,
|
|
.update_status = s6e63m0_set_brightness,
|
|
};
|
|
|
|
static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct s6e63m0 *lcd = dev_get_drvdata(dev);
|
|
char temp[10];
|
|
|
|
switch (lcd->gamma_mode) {
|
|
case 0:
|
|
sprintf(temp, "2.2 mode\n");
|
|
strcat(buf, temp);
|
|
break;
|
|
case 1:
|
|
sprintf(temp, "1.9 mode\n");
|
|
strcat(buf, temp);
|
|
break;
|
|
case 2:
|
|
sprintf(temp, "1.7 mode\n");
|
|
strcat(buf, temp);
|
|
break;
|
|
default:
|
|
dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n");
|
|
break;
|
|
}
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct s6e63m0 *lcd = dev_get_drvdata(dev);
|
|
struct backlight_device *bd = NULL;
|
|
int brightness, rc;
|
|
|
|
rc = kstrtouint(buf, 0, &lcd->gamma_mode);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
bd = lcd->bd;
|
|
|
|
brightness = bd->props.brightness;
|
|
|
|
switch (lcd->gamma_mode) {
|
|
case 0:
|
|
_s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
|
|
break;
|
|
case 1:
|
|
_s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]);
|
|
break;
|
|
case 2:
|
|
_s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]);
|
|
break;
|
|
default:
|
|
dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n");
|
|
_s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
|
|
break;
|
|
}
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(gamma_mode, 0644,
|
|
s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode);
|
|
|
|
static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct s6e63m0 *lcd = dev_get_drvdata(dev);
|
|
char temp[3];
|
|
|
|
sprintf(temp, "%d\n", lcd->gamma_table_count);
|
|
strcpy(buf, temp);
|
|
|
|
return strlen(buf);
|
|
}
|
|
static DEVICE_ATTR(gamma_table, 0444,
|
|
s6e63m0_sysfs_show_gamma_table, NULL);
|
|
|
|
static int s6e63m0_probe(struct spi_device *spi)
|
|
{
|
|
int ret = 0;
|
|
struct s6e63m0 *lcd = NULL;
|
|
struct lcd_device *ld = NULL;
|
|
struct backlight_device *bd = NULL;
|
|
struct backlight_properties props;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(struct s6e63m0), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
/* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */
|
|
spi->bits_per_word = 9;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "spi setup failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
lcd->spi = spi;
|
|
lcd->dev = &spi->dev;
|
|
|
|
lcd->lcd_pd = spi->dev.platform_data;
|
|
if (!lcd->lcd_pd) {
|
|
dev_err(&spi->dev, "platform data is NULL.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ld = lcd_device_register("s6e63m0", &spi->dev, lcd, &s6e63m0_lcd_ops);
|
|
if (IS_ERR(ld))
|
|
return PTR_ERR(ld);
|
|
|
|
lcd->ld = ld;
|
|
|
|
memset(&props, 0, sizeof(struct backlight_properties));
|
|
props.type = BACKLIGHT_RAW;
|
|
props.max_brightness = MAX_BRIGHTNESS;
|
|
|
|
bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd,
|
|
&s6e63m0_backlight_ops, &props);
|
|
if (IS_ERR(bd)) {
|
|
ret = PTR_ERR(bd);
|
|
goto out_lcd_unregister;
|
|
}
|
|
|
|
bd->props.brightness = MAX_BRIGHTNESS;
|
|
lcd->bd = bd;
|
|
|
|
/*
|
|
* it gets gamma table count available so it gets user
|
|
* know that.
|
|
*/
|
|
lcd->gamma_table_count =
|
|
sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int *));
|
|
|
|
ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode);
|
|
if (ret < 0)
|
|
dev_err(&(spi->dev), "failed to add sysfs entries\n");
|
|
|
|
ret = device_create_file(&(spi->dev), &dev_attr_gamma_table);
|
|
if (ret < 0)
|
|
dev_err(&(spi->dev), "failed to add sysfs entries\n");
|
|
|
|
/*
|
|
* if lcd panel was on from bootloader like u-boot then
|
|
* do not lcd on.
|
|
*/
|
|
if (!lcd->lcd_pd->lcd_enabled) {
|
|
/*
|
|
* if lcd panel was off from bootloader then
|
|
* current lcd status is powerdown and then
|
|
* it enables lcd panel.
|
|
*/
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
|
|
s6e63m0_power(lcd, FB_BLANK_UNBLANK);
|
|
} else {
|
|
lcd->power = FB_BLANK_UNBLANK;
|
|
}
|
|
|
|
spi_set_drvdata(spi, lcd);
|
|
|
|
dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n");
|
|
|
|
return 0;
|
|
|
|
out_lcd_unregister:
|
|
lcd_device_unregister(ld);
|
|
return ret;
|
|
}
|
|
|
|
static int s6e63m0_remove(struct spi_device *spi)
|
|
{
|
|
struct s6e63m0 *lcd = spi_get_drvdata(spi);
|
|
|
|
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
|
|
device_remove_file(&spi->dev, &dev_attr_gamma_table);
|
|
device_remove_file(&spi->dev, &dev_attr_gamma_mode);
|
|
backlight_device_unregister(lcd->bd);
|
|
lcd_device_unregister(lcd->ld);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int s6e63m0_suspend(struct device *dev)
|
|
{
|
|
struct s6e63m0 *lcd = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "lcd->power = %d\n", lcd->power);
|
|
|
|
/*
|
|
* when lcd panel is suspend, lcd panel becomes off
|
|
* regardless of status.
|
|
*/
|
|
return s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static int s6e63m0_resume(struct device *dev)
|
|
{
|
|
struct s6e63m0 *lcd = dev_get_drvdata(dev);
|
|
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
|
|
return s6e63m0_power(lcd, FB_BLANK_UNBLANK);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(s6e63m0_pm_ops, s6e63m0_suspend, s6e63m0_resume);
|
|
|
|
/* Power down all displays on reboot, poweroff or halt. */
|
|
static void s6e63m0_shutdown(struct spi_device *spi)
|
|
{
|
|
struct s6e63m0 *lcd = spi_get_drvdata(spi);
|
|
|
|
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
|
|
}
|
|
|
|
static struct spi_driver s6e63m0_driver = {
|
|
.driver = {
|
|
.name = "s6e63m0",
|
|
.owner = THIS_MODULE,
|
|
.pm = &s6e63m0_pm_ops,
|
|
},
|
|
.probe = s6e63m0_probe,
|
|
.remove = s6e63m0_remove,
|
|
.shutdown = s6e63m0_shutdown,
|
|
};
|
|
|
|
module_spi_driver(s6e63m0_driver);
|
|
|
|
MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
|
|
MODULE_DESCRIPTION("S6E63M0 LCD Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|