mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 18:24:14 +08:00
0a4e361254
Because of the rudimentary design of the chip, it is necessary to poll the SCSI bus signals during PIO and this tends to hog the CPU. The driver will accept new commands while others execute, and this causes a soft lockup because the workqueue item will not terminate until the issue queue is emptied. When exercising dmx3191d using sequential IO from dd, the driver is sent 512 KiB WRITE commands and 128 KiB READs. For a PIO transfer, the rate is is only about 300 KiB/s, so these are long-running commands. And although PDMA may run at several MiB/s, interrupts are disabled for the duration of the transfer. Fix the unresponsiveness and soft lockup issues by calling cond_resched() after each command is completed and by limiting max_sectors for drivers that don't implement real DMA. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|---|---|---|
| .. | ||
| acornscsi-io.S | ||
| acornscsi.c | ||
| acornscsi.h | ||
| arxescsi.c | ||
| cumana_1.c | ||
| cumana_2.c | ||
| eesox.c | ||
| fas216.c | ||
| fas216.h | ||
| Kconfig | ||
| Makefile | ||
| msgqueue.c | ||
| msgqueue.h | ||
| oak.c | ||
| powertec.c | ||
| queue.c | ||
| queue.h | ||
| scsi.h | ||