Maxime Ripard 8ca011ef4a clk: bcm-2835: Remove rounding up the dividers ... The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca0 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca0 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech		2021-10-25 15:33:39 +02:00
..
clk-bcm63xx-gate.c	clk: bcm63xx-gate: switch to dt-bindings definitions	2020-06-19 17:03:24 -07:00
clk-bcm63xx.c	clk: bcm: Add BCM63138 clock support	2015-11-20 15:46:27 -08:00
clk-bcm281xx.c	clk: bcm281xx: move compatible string definitions	2014-04-30 11:51:39 -07:00
clk-bcm2711-dvp.c	clk: bcm: dvp: Add MODULE_DEVICE_TABLE()	2020-12-19 11:48:29 -08:00
clk-bcm2835-aux.c	clk: bcm2835: use devm_platform_ioremap_resource() to simplify code	2019-10-16 16:16:50 -07:00
clk-bcm2835.c	clk: bcm-2835: Remove rounding up the dividers	2021-10-25 15:33:39 +02:00
clk-bcm21664.c	clk: bcm21664: use common clock framework	2014-04-30 11:51:44 -07:00
clk-bcm53573-ilp.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
clk-cygnus.c	clk: iproc: Allow iproc pll to runtime calculate vco parameters	2017-12-28 14:53:33 -08:00
clk-hr2.c	clk: bcm: Add Broadcom Hurricane 2 clock support	2017-10-12 11:31:46 -07:00
clk-iproc-armpll.c	clk: bcm: iproc: Migrate to clk_hw based registration and OF APIs	2016-06-30 12:26:45 -07:00
clk-iproc-asiu.c	clk: iproc: round clock rate to the closest	2020-07-24 01:54:18 -07:00
clk-iproc-pll.c	clk: bcm: clk-iproc-pll: Demote kernel-doc abuse	2021-02-11 11:56:06 -08:00
clk-iproc.h	clk: iproc: Allow iproc pll to runtime calculate vco parameters	2017-12-28 14:53:33 -08:00
clk-kona-setup.c	clk: Convert to using %pOFn instead of device_node.name	2018-08-30 09:50:20 -07:00
clk-kona.c	clk: Remove io.h from clk-provider.h	2019-05-15 13:21:37 -07:00
clk-kona.h	clk: bcm: kona: Migrate to clk_hw based registration and OF APIs	2016-08-24 16:06:18 -07:00
clk-ns2.c	clk: ns2: Correct SDIO bits	2017-04-19 09:50:39 -07:00
clk-nsp.c	clk: iproc: Split off dig_filter	2015-10-21 17:02:57 -07:00
clk-raspberrypi.c	clk: bcm: rpi: Release firmware handle on unbind	2021-03-22 17:59:51 +01:00
clk-sr.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459	2019-06-19 17:09:09 +02:00
Kconfig	clk: bcm: dvp: Select the reset framework	2020-09-10 00:53:38 -07:00
Makefile	clk: bcm: Add BCM2711 DVP driver	2020-06-19 17:13:53 -07:00