korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-17 09:14:19 +08:00
Code Issues Packages Projects Releases Wiki Activity
3e45999096
linux/arch/arm/mach-omap1/board-voiceblue.c
Russell King e7b3dc7ef1 [NET] smc91x: Make smc91x use IRQ resource trigger flags 
smc91x is shared between many different platforms.  Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.

Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.

Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.

Also provide a way to configure smc91x to read the IRQ flags from the
resource.  Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28 13:13:19 +00:00

293 lines
6.8 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap1/board-voiceblue.c
*
* Modified from board-generic.c
*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/arch/common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/usb.h>
extern void omap_init_time(void);
extern int omap_gpio_init(void);
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
.irq = OMAP_GPIO_IRQ(12),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
.irq = OMAP_GPIO_IRQ(13),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
.irq = OMAP_GPIO_IRQ(14),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
.irq = OMAP_GPIO_IRQ(15),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = voiceblue_ports,
},
};
static int __init ext_uart_init(void)
{
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
static struct flash_platform_data voiceblue_flash_data = {
.map_name = "cfi_probe",
.width = 2,
};
static struct resource voiceblue_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device voiceblue_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &voiceblue_flash_data,
},
.num_resources = 1,
.resource = &voiceblue_flash_resource,
};
static struct resource voiceblue_smc91x_resources[] = {
[0] = {
.start = OMAP_CS2_PHYS + 0x300,
.end = OMAP_CS2_PHYS + 0x300 + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct platform_device voiceblue_smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
.resource = voiceblue_smc91x_resources,
};
static struct platform_device *voiceblue_devices[] __initdata = {
&voiceblue_flash_device,
&voiceblue_smc91x_device,
};
static struct omap_usb_config voiceblue_usb_config __initdata = {
.hmc_mode = 3,
.register_host = 1,
.register_dev = 1,
.pins[0] = 2,
.pins[1] = 6,
.pins[2] = 6,
};
static struct omap_mmc_config voiceblue_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.power_pin = 2,
.switch_pin = -1,
},
};
static struct omap_uart_config voiceblue_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static void __init voiceblue_init(void)
{
/* Watchdog */
omap_request_gpio(0);
/* smc91x reset */
omap_request_gpio(7);
omap_set_gpio_direction(7, 0);
omap_set_gpio_dataout(7, 1);
udelay(2); /* wait at least 100ns */
omap_set_gpio_dataout(7, 0);
mdelay(50); /* 50ms until PHY ready */
/* smc91x interrupt pin */
omap_request_gpio(8);
/* 16C554 reset*/
omap_request_gpio(6);
omap_set_gpio_direction(6, 0);
omap_set_gpio_dataout(6, 0);
/* 16C554 interrupt pins */
omap_request_gpio(12);
omap_request_gpio(13);
omap_request_gpio(14);
omap_request_gpio(15);
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
/* There is a good chance board is going up, so enable power LED
* (it is connected through invertor) */
omap_writeb(0x00, OMAP_LPG1_LCR);
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
}
static void __init voiceblue_map_io(void)
{
omap1_map_common_io();
}
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
static unsigned long machine_state;
static int panic_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
return NOTIFY_DONE;
/* Flash power LED */
omap_writeb(0x78, OMAP_LPG1_LCR);
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
return NOTIFY_DONE;
}
static struct notifier_block panic_block = {
.notifier_call = panic_event,
};
static int __init voiceblue_setup(void)
{
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
postcore_initcall(voiceblue_setup);
static int wdt_gpio_state;
void voiceblue_wdt_enable(void)
{
omap_set_gpio_direction(0, 0);
omap_set_gpio_dataout(0, 0);
omap_set_gpio_dataout(0, 1);
omap_set_gpio_dataout(0, 0);
wdt_gpio_state = 0;
}
void voiceblue_wdt_disable(void)
{
omap_set_gpio_dataout(0, 0);
omap_set_gpio_dataout(0, 1);
omap_set_gpio_dataout(0, 0);
omap_set_gpio_direction(0, 1);
}
void voiceblue_wdt_ping(void)
{
if (test_bit(MACHINE_REBOOT, &machine_state))
return;
wdt_gpio_state = !wdt_gpio_state;
omap_set_gpio_dataout(0, wdt_gpio_state);
}
void voiceblue_reset(void)
{
set_bit(MACHINE_REBOOT, &machine_state);
voiceblue_wdt_enable();
while (1) ;
}
EXPORT_SYMBOL(voiceblue_wdt_enable);
EXPORT_SYMBOL(voiceblue_wdt_disable);
EXPORT_SYMBOL(voiceblue_wdt_ping);
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = voiceblue_map_io,
.init_irq = voiceblue_init_irq,
.init_machine = voiceblue_init,
.timer = &omap_timer,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink