mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 22:44:27 +08:00
fb9b31e4ea
Silence deferred probe error caused by the PHY driver which is probed later than the ChipIdea driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
381 lines
9.4 KiB
C
381 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2016, NVIDIA Corporation
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/chipidea.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/of.h>
|
|
#include <linux/usb/phy.h>
|
|
|
|
#include "../host/ehci.h"
|
|
|
|
#include "ci.h"
|
|
|
|
struct tegra_usb {
|
|
struct ci_hdrc_platform_data data;
|
|
struct platform_device *dev;
|
|
|
|
const struct tegra_usb_soc_info *soc;
|
|
struct usb_phy *phy;
|
|
struct clk *clk;
|
|
|
|
bool needs_double_reset;
|
|
};
|
|
|
|
struct tegra_usb_soc_info {
|
|
unsigned long flags;
|
|
unsigned int txfifothresh;
|
|
enum usb_dr_mode dr_mode;
|
|
};
|
|
|
|
static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
|
|
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
|
|
CI_HDRC_OVERRIDE_PHY_CONTROL |
|
|
CI_HDRC_SUPPORTS_RUNTIME_PM,
|
|
.dr_mode = USB_DR_MODE_HOST,
|
|
.txfifothresh = 10,
|
|
};
|
|
|
|
static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
|
|
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
|
|
CI_HDRC_OVERRIDE_PHY_CONTROL |
|
|
CI_HDRC_SUPPORTS_RUNTIME_PM,
|
|
.dr_mode = USB_DR_MODE_HOST,
|
|
.txfifothresh = 16,
|
|
};
|
|
|
|
static const struct tegra_usb_soc_info tegra20_udc_soc_info = {
|
|
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
|
|
CI_HDRC_OVERRIDE_PHY_CONTROL |
|
|
CI_HDRC_SUPPORTS_RUNTIME_PM,
|
|
.dr_mode = USB_DR_MODE_UNKNOWN,
|
|
.txfifothresh = 10,
|
|
};
|
|
|
|
static const struct tegra_usb_soc_info tegra30_udc_soc_info = {
|
|
.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
|
|
CI_HDRC_OVERRIDE_PHY_CONTROL |
|
|
CI_HDRC_SUPPORTS_RUNTIME_PM,
|
|
.dr_mode = USB_DR_MODE_UNKNOWN,
|
|
.txfifothresh = 16,
|
|
};
|
|
|
|
static const struct of_device_id tegra_usb_of_match[] = {
|
|
{
|
|
.compatible = "nvidia,tegra20-ehci",
|
|
.data = &tegra20_ehci_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra30-ehci",
|
|
.data = &tegra30_ehci_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra20-udc",
|
|
.data = &tegra20_udc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra30-udc",
|
|
.data = &tegra30_udc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra114-udc",
|
|
.data = &tegra30_udc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra124-udc",
|
|
.data = &tegra30_udc_soc_info,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_usb_of_match);
|
|
|
|
static int tegra_usb_reset_controller(struct device *dev)
|
|
{
|
|
struct reset_control *rst, *rst_utmi;
|
|
struct device_node *phy_np;
|
|
int err;
|
|
|
|
rst = devm_reset_control_get_shared(dev, "usb");
|
|
if (IS_ERR(rst)) {
|
|
dev_err(dev, "can't get ehci reset: %pe\n", rst);
|
|
return PTR_ERR(rst);
|
|
}
|
|
|
|
phy_np = of_parse_phandle(dev->of_node, "nvidia,phy", 0);
|
|
if (!phy_np)
|
|
return -ENOENT;
|
|
|
|
/*
|
|
* The 1st USB controller contains some UTMI pad registers that are
|
|
* global for all the controllers on the chip. Those registers are
|
|
* also cleared when reset is asserted to the 1st controller.
|
|
*/
|
|
rst_utmi = of_reset_control_get_shared(phy_np, "utmi-pads");
|
|
if (IS_ERR(rst_utmi)) {
|
|
dev_warn(dev, "can't get utmi-pads reset from the PHY\n");
|
|
dev_warn(dev, "continuing, but please update your DT\n");
|
|
} else {
|
|
/*
|
|
* PHY driver performs UTMI-pads reset in a case of a
|
|
* non-legacy DT.
|
|
*/
|
|
reset_control_put(rst_utmi);
|
|
}
|
|
|
|
of_node_put(phy_np);
|
|
|
|
/* reset control is shared, hence initialize it first */
|
|
err = reset_control_deassert(rst);
|
|
if (err)
|
|
return err;
|
|
|
|
err = reset_control_assert(rst);
|
|
if (err)
|
|
return err;
|
|
|
|
udelay(1);
|
|
|
|
err = reset_control_deassert(rst);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_usb_notify_event(struct ci_hdrc *ci, unsigned int event)
|
|
{
|
|
struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
|
|
struct ehci_hcd *ehci;
|
|
|
|
switch (event) {
|
|
case CI_HDRC_CONTROLLER_RESET_EVENT:
|
|
if (ci->hcd) {
|
|
ehci = hcd_to_ehci(ci->hcd);
|
|
ehci->has_tdi_phy_lpm = false;
|
|
ehci_writel(ehci, usb->soc->txfifothresh << 16,
|
|
&ehci->regs->txfill_tuning);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_usb_internal_port_reset(struct ehci_hcd *ehci,
|
|
u32 __iomem *portsc_reg,
|
|
unsigned long *flags)
|
|
{
|
|
u32 saved_usbintr, temp;
|
|
unsigned int i, tries;
|
|
int retval = 0;
|
|
|
|
saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
/* disable USB interrupt */
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
spin_unlock_irqrestore(&ehci->lock, *flags);
|
|
|
|
/*
|
|
* Here we have to do Port Reset at most twice for
|
|
* Port Enable bit to be set.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
temp = ehci_readl(ehci, portsc_reg);
|
|
temp |= PORT_RESET;
|
|
ehci_writel(ehci, temp, portsc_reg);
|
|
fsleep(10000);
|
|
temp &= ~PORT_RESET;
|
|
ehci_writel(ehci, temp, portsc_reg);
|
|
fsleep(1000);
|
|
tries = 100;
|
|
do {
|
|
fsleep(1000);
|
|
/*
|
|
* Up to this point, Port Enable bit is
|
|
* expected to be set after 2 ms waiting.
|
|
* USB1 usually takes extra 45 ms, for safety,
|
|
* we take 100 ms as timeout.
|
|
*/
|
|
temp = ehci_readl(ehci, portsc_reg);
|
|
} while (!(temp & PORT_PE) && tries--);
|
|
if (temp & PORT_PE)
|
|
break;
|
|
}
|
|
if (i == 2)
|
|
retval = -ETIMEDOUT;
|
|
|
|
/*
|
|
* Clear Connect Status Change bit if it's set.
|
|
* We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
|
|
*/
|
|
if (temp & PORT_CSC)
|
|
ehci_writel(ehci, PORT_CSC, portsc_reg);
|
|
|
|
/*
|
|
* Write to clear any interrupt status bits that might be set
|
|
* during port reset.
|
|
*/
|
|
temp = ehci_readl(ehci, &ehci->regs->status);
|
|
ehci_writel(ehci, temp, &ehci->regs->status);
|
|
|
|
/* restore original interrupt-enable bits */
|
|
spin_lock_irqsave(&ehci->lock, *flags);
|
|
ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int tegra_ehci_hub_control(struct ci_hdrc *ci, u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength,
|
|
bool *done, unsigned long *flags)
|
|
{
|
|
struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(ci->hcd);
|
|
u32 __iomem *status_reg;
|
|
int retval = 0;
|
|
|
|
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
|
|
|
|
switch (typeReq) {
|
|
case SetPortFeature:
|
|
if (wValue != USB_PORT_FEAT_RESET || !usb->needs_double_reset)
|
|
break;
|
|
|
|
/* for USB1 port we need to issue Port Reset twice internally */
|
|
retval = tegra_usb_internal_port_reset(ehci, status_reg, flags);
|
|
*done = true;
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void tegra_usb_enter_lpm(struct ci_hdrc *ci, bool enable)
|
|
{
|
|
/*
|
|
* Touching any register which belongs to AHB clock domain will
|
|
* hang CPU if USB controller is put into low power mode because
|
|
* AHB USB clock is gated on Tegra in the LPM.
|
|
*
|
|
* Tegra PHY has a separate register for checking the clock status
|
|
* and usb_phy_set_suspend() takes care of gating/ungating the clocks
|
|
* and restoring the PHY state on Tegra. Hence DEVLC/PORTSC registers
|
|
* shouldn't be touched directly by the CI driver.
|
|
*/
|
|
usb_phy_set_suspend(ci->usb_phy, enable);
|
|
}
|
|
|
|
static int tegra_usb_probe(struct platform_device *pdev)
|
|
{
|
|
const struct tegra_usb_soc_info *soc;
|
|
struct tegra_usb *usb;
|
|
int err;
|
|
|
|
usb = devm_kzalloc(&pdev->dev, sizeof(*usb), GFP_KERNEL);
|
|
if (!usb)
|
|
return -ENOMEM;
|
|
|
|
soc = of_device_get_match_data(&pdev->dev);
|
|
if (!soc) {
|
|
dev_err(&pdev->dev, "failed to match OF data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
|
|
if (IS_ERR(usb->phy))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy),
|
|
"failed to get PHY\n");
|
|
|
|
usb->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(usb->clk)) {
|
|
err = PTR_ERR(usb->clk);
|
|
dev_err(&pdev->dev, "failed to get clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(usb->clk);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "failed to enable clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
if (device_property_present(&pdev->dev, "nvidia,needs-double-reset"))
|
|
usb->needs_double_reset = true;
|
|
|
|
err = tegra_usb_reset_controller(&pdev->dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to reset controller: %d\n", err);
|
|
goto fail_power_off;
|
|
}
|
|
|
|
/*
|
|
* USB controller registers shouldn't be touched before PHY is
|
|
* initialized, otherwise CPU will hang because clocks are gated.
|
|
* PHY driver controls gating of internal USB clocks on Tegra.
|
|
*/
|
|
err = usb_phy_init(usb->phy);
|
|
if (err)
|
|
goto fail_power_off;
|
|
|
|
platform_set_drvdata(pdev, usb);
|
|
|
|
/* setup and register ChipIdea HDRC device */
|
|
usb->soc = soc;
|
|
usb->data.name = "tegra-usb";
|
|
usb->data.flags = soc->flags;
|
|
usb->data.usb_phy = usb->phy;
|
|
usb->data.dr_mode = soc->dr_mode;
|
|
usb->data.capoffset = DEF_CAPOFFSET;
|
|
usb->data.enter_lpm = tegra_usb_enter_lpm;
|
|
usb->data.hub_control = tegra_ehci_hub_control;
|
|
usb->data.notify_event = tegra_usb_notify_event;
|
|
|
|
/* Tegra PHY driver currently doesn't support LPM for ULPI */
|
|
if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
|
|
usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
|
|
|
|
usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource,
|
|
pdev->num_resources, &usb->data);
|
|
if (IS_ERR(usb->dev)) {
|
|
err = PTR_ERR(usb->dev);
|
|
dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err);
|
|
goto phy_shutdown;
|
|
}
|
|
|
|
return 0;
|
|
|
|
phy_shutdown:
|
|
usb_phy_shutdown(usb->phy);
|
|
fail_power_off:
|
|
clk_disable_unprepare(usb->clk);
|
|
return err;
|
|
}
|
|
|
|
static int tegra_usb_remove(struct platform_device *pdev)
|
|
{
|
|
struct tegra_usb *usb = platform_get_drvdata(pdev);
|
|
|
|
ci_hdrc_remove_device(usb->dev);
|
|
usb_phy_shutdown(usb->phy);
|
|
clk_disable_unprepare(usb->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tegra_usb_driver = {
|
|
.driver = {
|
|
.name = "tegra-usb",
|
|
.of_match_table = tegra_usb_of_match,
|
|
},
|
|
.probe = tegra_usb_probe,
|
|
.remove = tegra_usb_remove,
|
|
};
|
|
module_platform_driver(tegra_usb_driver);
|
|
|
|
MODULE_DESCRIPTION("NVIDIA Tegra USB driver");
|
|
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
|
|
MODULE_LICENSE("GPL v2");
|