mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
4f30b9d231
Add support for USB controller present on the AM64x SoC. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
237 lines
5.6 KiB
C
237 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
/* USB Wrapper register offsets */
|
|
#define USBSS_PID 0x0
|
|
#define USBSS_W1 0x4
|
|
#define USBSS_STATIC_CONFIG 0x8
|
|
#define USBSS_PHY_TEST 0xc
|
|
#define USBSS_DEBUG_CTRL 0x10
|
|
#define USBSS_DEBUG_INFO 0x14
|
|
#define USBSS_DEBUG_LINK_STATE 0x18
|
|
#define USBSS_DEVICE_CTRL 0x1c
|
|
|
|
/* Wrapper 1 register bits */
|
|
#define USBSS_W1_PWRUP_RST BIT(0)
|
|
#define USBSS_W1_OVERCURRENT_SEL BIT(8)
|
|
#define USBSS_W1_MODESTRAP_SEL BIT(9)
|
|
#define USBSS_W1_OVERCURRENT BIT(16)
|
|
#define USBSS_W1_MODESTRAP_MASK GENMASK(18, 17)
|
|
#define USBSS_W1_MODESTRAP_SHIFT 17
|
|
#define USBSS_W1_USB2_ONLY BIT(19)
|
|
|
|
/* Static config register bits */
|
|
#define USBSS1_STATIC_PLL_REF_SEL_MASK GENMASK(8, 5)
|
|
#define USBSS1_STATIC_PLL_REF_SEL_SHIFT 5
|
|
#define USBSS1_STATIC_LOOPBACK_MODE_MASK GENMASK(4, 3)
|
|
#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT 3
|
|
#define USBSS1_STATIC_VBUS_SEL_MASK GENMASK(2, 1)
|
|
#define USBSS1_STATIC_VBUS_SEL_SHIFT 1
|
|
#define USBSS1_STATIC_LANE_REVERSE BIT(0)
|
|
|
|
/* Modestrap modes */
|
|
enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
|
|
USBSS_MODESTRAP_MODE_HOST,
|
|
USBSS_MODESTRAP_MODE_PERIPHERAL};
|
|
|
|
struct cdns_ti {
|
|
struct device *dev;
|
|
void __iomem *usbss;
|
|
unsigned usb2_only:1;
|
|
unsigned vbus_divider:1;
|
|
struct clk *usb2_refclk;
|
|
struct clk *lpm_clk;
|
|
};
|
|
|
|
static const int cdns_ti_rate_table[] = { /* in KHZ */
|
|
9600,
|
|
10000,
|
|
12000,
|
|
19200,
|
|
20000,
|
|
24000,
|
|
25000,
|
|
26000,
|
|
38400,
|
|
40000,
|
|
58000,
|
|
50000,
|
|
52000,
|
|
};
|
|
|
|
static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
|
|
{
|
|
return readl(data->usbss + offset);
|
|
}
|
|
|
|
static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, data->usbss + offset);
|
|
}
|
|
|
|
static int cdns_ti_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct cdns_ti *data;
|
|
int error;
|
|
u32 reg;
|
|
int rate_code, i;
|
|
unsigned long rate;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
data->dev = dev;
|
|
|
|
data->usbss = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(data->usbss)) {
|
|
dev_err(dev, "can't map IOMEM resource\n");
|
|
return PTR_ERR(data->usbss);
|
|
}
|
|
|
|
data->usb2_refclk = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(data->usb2_refclk)) {
|
|
dev_err(dev, "can't get usb2_refclk\n");
|
|
return PTR_ERR(data->usb2_refclk);
|
|
}
|
|
|
|
data->lpm_clk = devm_clk_get(dev, "lpm");
|
|
if (IS_ERR(data->lpm_clk)) {
|
|
dev_err(dev, "can't get lpm_clk\n");
|
|
return PTR_ERR(data->lpm_clk);
|
|
}
|
|
|
|
rate = clk_get_rate(data->usb2_refclk);
|
|
rate /= 1000; /* To KHz */
|
|
for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
|
|
if (cdns_ti_rate_table[i] == rate)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
|
|
dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rate_code = i;
|
|
|
|
pm_runtime_enable(dev);
|
|
error = pm_runtime_get_sync(dev);
|
|
if (error < 0) {
|
|
dev_err(dev, "pm_runtime_get_sync failed: %d\n", error);
|
|
goto err;
|
|
}
|
|
|
|
/* assert RESET */
|
|
reg = cdns_ti_readl(data, USBSS_W1);
|
|
reg &= ~USBSS_W1_PWRUP_RST;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
/* set static config */
|
|
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
|
|
reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
|
|
reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
|
|
|
|
reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
|
|
data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
|
|
if (data->vbus_divider)
|
|
reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
|
|
|
|
cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
|
|
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
|
|
|
|
/* set USB2_ONLY mode if requested */
|
|
reg = cdns_ti_readl(data, USBSS_W1);
|
|
data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
|
|
if (data->usb2_only)
|
|
reg |= USBSS_W1_USB2_ONLY;
|
|
|
|
/* set default modestrap */
|
|
reg |= USBSS_W1_MODESTRAP_SEL;
|
|
reg &= ~USBSS_W1_MODESTRAP_MASK;
|
|
reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
/* de-assert RESET */
|
|
reg |= USBSS_W1_PWRUP_RST;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
error = of_platform_populate(node, NULL, NULL, dev);
|
|
if (error) {
|
|
dev_err(dev, "failed to create children: %d\n", error);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
pm_runtime_put_sync(data->dev);
|
|
pm_runtime_disable(data->dev);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int cdns_ti_remove_core(struct device *dev, void *c)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
platform_device_unregister(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns_ti_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
device_for_each_child(dev, NULL, cdns_ti_remove_core);
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id cdns_ti_of_match[] = {
|
|
{ .compatible = "ti,j721e-usb", },
|
|
{ .compatible = "ti,am64-usb", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cdns_ti_of_match);
|
|
|
|
static struct platform_driver cdns_ti_driver = {
|
|
.probe = cdns_ti_probe,
|
|
.remove = cdns_ti_remove,
|
|
.driver = {
|
|
.name = "cdns3-ti",
|
|
.of_match_table = cdns_ti_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(cdns_ti_driver);
|
|
|
|
MODULE_ALIAS("platform:cdns3-ti");
|
|
MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Cadence USB3 TI Glue Layer");
|