Andrew Lunn a7d8d1c7a7 usb: core: hub: Disable autosuspend for Cypress CY7C65632 ... The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d7 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2021-06-17 15:34:21 +02:00
..
buffer.c	usb: core: Replace in_interrupt() in comments	2020-10-28 12:32:59 +01:00
config.c	usb: fix a few cases of -Wfallthrough	2020-11-13 15:20:52 +01:00
devices.c	usb: common: add function to get interval expressed in us unit	2021-03-10 09:37:17 +01:00
devio.c	USB: usbfs: Don't WARN about excessively large memory allocations	2021-05-21 14:24:46 +02:00
driver.c	USB: core: rename usb_driver_claim_interface() data parameter	2021-03-23 12:39:39 +01:00
endpoint.c	usb: common: add function to get interval expressed in us unit	2021-03-10 09:37:17 +01:00
file.c	USB: core: Fix races in character device registration and deregistraion	2019-08-12 22:47:24 +02:00
generic.c	usbcore: Check both id_table and match() when both available	2020-10-28 13:24:58 +01:00
hcd-pci.c	usb: core: Replace in_interrupt() in comments	2020-10-28 12:32:59 +01:00
hcd.c	usb: core: Track SuperSpeed Plus GenXxY	2021-03-23 13:12:37 +01:00
hub.c	usb: core: hub: Disable autosuspend for Cypress CY7C65632	2021-06-17 15:34:21 +02:00
hub.h	usb: core: reduce power-on-good delay time of root hub	2021-04-10 10:45:48 +02:00
Kconfig	USB: hub: Add Kconfig option to reduce number of port initialization retries	2020-10-02 11:29:02 +02:00
ledtrig-usbport.c	usb: core: ledtrig-usbport: Demote obvious misuse of kerneldoc to standard comment blocks	2020-07-09 16:46:57 +02:00
Makefile	usb: core: add a wrapper for the USB PHYs on the HCD	2018-03-09 09:43:53 -08:00
message.c	USB: core: drop pipe-type check from new control-message helpers	2020-12-07 15:23:24 +01:00
notify.c	USB: core: Remove usbfs_mutex	2019-06-26 10:28:09 +08:00
of.c	drivers: usb: Fix trivial spelling	2020-06-18 10:13:16 +02:00
otg_productlist.h	USB: OTG: rename product list of devices	2020-06-19 08:58:55 +02:00
phy.c	usb: core: phy: add support for PHY calibration	2019-09-03 15:54:55 +02:00
phy.h	usb: core: phy: add support for PHY calibration	2019-09-03 15:54:55 +02:00
port.c	Revert "usb: Link the ports to the connectors they are attached to"	2021-04-12 14:36:02 +02:00
quirks.c	USB: Add reset-resume quirk for WD19's Realtek Hub	2021-04-22 10:52:56 +02:00
sysfs.c	usb: core: sysfs: Check for SSP rate in speed attr	2021-03-23 13:18:22 +01:00
urb.c	USB: move snd_usb_pipe_sanity_check into the USB core	2020-09-16 11:02:23 +02:00
usb-acpi.c	usb: core: Use ACPI_SUCCESS() at appropriate places	2020-02-19 11:08:52 +01:00
usb.c	usb: Iterator for ports	2021-04-09 16:00:00 +02:00
usb.h	usbcore: Check both id_table and match() when both available	2020-10-28 13:24:58 +01:00