korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-30 23:54:04 +08:00
Code Issues Packages Projects Releases Wiki Activity
3d12862b21
linux/drivers/hwmon/max31827.c
Guenter Roeck 138d45d967 hwmon: (pmbus/max31827) Explain why enum chips must not start with 0 
If a driver calls device_get_match_data(), the .data pointer in its id
data structures must not be NULL/0 because device_get_match_data()
returns NULL if an entry is not found. Explain that in a comment to avoid
confusion why this is required in this driver but not in other drivers.

Cc: Daniel Matyas <daniel.matyas@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-11 07:25:03 -07:00

678 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* max31827.c - Support for Maxim Low-Power Switch
*
* Copyright (c) 2023 Daniel Matyas <daniel.matyas@analog.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define MAX31827_T_REG 0x0
#define MAX31827_CONFIGURATION_REG 0x2
#define MAX31827_TH_REG 0x4
#define MAX31827_TL_REG 0x6
#define MAX31827_TH_HYST_REG 0x8
#define MAX31827_TL_HYST_REG 0xA
#define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0)
#define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1)
#define MAX31827_CONFIGURATION_PEC_EN_MASK BIT(4)
#define MAX31827_CONFIGURATION_TIMEOUT_MASK BIT(5)
#define MAX31827_CONFIGURATION_RESOLUTION_MASK GENMASK(7, 6)
#define MAX31827_CONFIGURATION_ALRM_POL_MASK BIT(8)
#define MAX31827_CONFIGURATION_COMP_INT_MASK BIT(9)
#define MAX31827_CONFIGURATION_FLT_Q_MASK GENMASK(11, 10)
#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14)
#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15)
#define MAX31827_ALRM_POL_LOW 0x0
#define MAX31827_ALRM_POL_HIGH 0x1
#define MAX31827_FLT_Q_1 0x0
#define MAX31827_FLT_Q_4 0x2
#define MAX31827_8_BIT_CNV_TIME 9
#define MAX31827_9_BIT_CNV_TIME 18
#define MAX31827_10_BIT_CNV_TIME 35
#define MAX31827_12_BIT_CNV_TIME 140
#define MAX31827_16_BIT_TO_M_DGR(x) (sign_extend32(x, 15) * 1000 / 16)
#define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000)
#define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0)
/*
* The enum passed in the .data pointer of struct of_device_id must
* start with a value != 0 since that is a requirement for using
* device_get_match_data().
*/
enum chips { max31827 = 1, max31828, max31829 };
enum max31827_cnv {
MAX31827_CNV_1_DIV_64_HZ = 1,
MAX31827_CNV_1_DIV_32_HZ,
MAX31827_CNV_1_DIV_16_HZ,
MAX31827_CNV_1_DIV_4_HZ,
MAX31827_CNV_1_HZ,
MAX31827_CNV_4_HZ,
MAX31827_CNV_8_HZ,
};
static const u16 max31827_conversions[] = {
[MAX31827_CNV_1_DIV_64_HZ] = 64000,
[MAX31827_CNV_1_DIV_32_HZ] = 32000,
[MAX31827_CNV_1_DIV_16_HZ] = 16000,
[MAX31827_CNV_1_DIV_4_HZ] = 4000,
[MAX31827_CNV_1_HZ] = 1000,
[MAX31827_CNV_4_HZ] = 250,
[MAX31827_CNV_8_HZ] = 125,
};
enum max31827_resolution {
MAX31827_RES_8_BIT = 0,
MAX31827_RES_9_BIT,
MAX31827_RES_10_BIT,
MAX31827_RES_12_BIT,
};
static const u16 max31827_resolutions[] = {
[MAX31827_RES_8_BIT] = 1000,
[MAX31827_RES_9_BIT] = 500,
[MAX31827_RES_10_BIT] = 250,
[MAX31827_RES_12_BIT] = 62,
};
static const u16 max31827_conv_times[] = {
[MAX31827_RES_8_BIT] = MAX31827_8_BIT_CNV_TIME,
[MAX31827_RES_9_BIT] = MAX31827_9_BIT_CNV_TIME,
[MAX31827_RES_10_BIT] = MAX31827_10_BIT_CNV_TIME,
[MAX31827_RES_12_BIT] = MAX31827_12_BIT_CNV_TIME,
};
struct max31827_state {
/*
* Prevent simultaneous access to the i2c client.
*/
struct mutex lock;
struct regmap *regmap;
bool enable;
unsigned int resolution;
unsigned int update_interval;
};
static const struct regmap_config max31827_regmap = {
.reg_bits = 8,
.val_bits = 16,
.max_register = 0xA,
};
static int shutdown_write(struct max31827_state *st, unsigned int reg,
unsigned int mask, unsigned int val)
{
unsigned int cfg;
unsigned int cnv_rate;
int ret;
/*
* Before the Temperature Threshold Alarm, Alarm Hysteresis Threshold
* and Resolution bits from Configuration register are changed over I2C,
* the part must be in shutdown mode.
*
* Mutex is used to ensure, that some other process doesn't change the
* configuration register.
*/
mutex_lock(&st->lock);
if (!st->enable) {
if (!mask)
ret = regmap_write(st->regmap, reg, val);
else
ret = regmap_update_bits(st->regmap, reg, mask, val);
goto unlock;
}
ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &cfg);
if (ret)
goto unlock;
cnv_rate = MAX31827_CONFIGURATION_CNV_RATE_MASK & cfg;
cfg = cfg & ~(MAX31827_CONFIGURATION_1SHOT_MASK |
MAX31827_CONFIGURATION_CNV_RATE_MASK);
ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, cfg);
if (ret)
goto unlock;
if (!mask)
ret = regmap_write(st->regmap, reg, val);
else
ret = regmap_update_bits(st->regmap, reg, mask, val);
if (ret)
goto unlock;
ret = regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_CNV_RATE_MASK,
cnv_rate);
unlock:
mutex_unlock(&st->lock);
return ret;
}
static int write_alarm_val(struct max31827_state *st, unsigned int reg,
long val)
{
val = MAX31827_M_DGR_TO_16_BIT(val);
return shutdown_write(st, reg, 0, val);
}
static umode_t max31827_is_visible(const void *state,
enum hwmon_sensor_types type, u32 attr,
int channel)
{
if (type == hwmon_temp) {
switch (attr) {
case hwmon_temp_enable:
case hwmon_temp_max:
case hwmon_temp_min:
case hwmon_temp_max_hyst:
case hwmon_temp_min_hyst:
return 0644;
case hwmon_temp_input:
case hwmon_temp_min_alarm:
case hwmon_temp_max_alarm:
return 0444;
default:
return 0;
}
} else if (type == hwmon_chip) {
if (attr == hwmon_chip_update_interval)
return 0644;
}
return 0;
}
static int max31827_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct max31827_state *st = dev_get_drvdata(dev);
unsigned int uval;
int ret = 0;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_enable:
ret = regmap_read(st->regmap,
MAX31827_CONFIGURATION_REG, &uval);
if (ret)
break;
uval = FIELD_GET(MAX31827_CONFIGURATION_1SHOT_MASK |
MAX31827_CONFIGURATION_CNV_RATE_MASK,
uval);
*val = !!uval;
break;
case hwmon_temp_input:
mutex_lock(&st->lock);
if (!st->enable) {
/*
* This operation requires mutex protection,
* because the chip configuration should not
* be changed during the conversion process.
*/
ret = regmap_update_bits(st->regmap,
MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_1SHOT_MASK,
1);
if (ret) {
mutex_unlock(&st->lock);
return ret;
}
msleep(max31827_conv_times[st->resolution]);
}
/*
* For 12-bit resolution the conversion time is 140 ms,
* thus an additional 15 ms is needed to complete the
* conversion: 125 ms + 15 ms = 140 ms
*/
if (max31827_resolutions[st->resolution] == 12 &&
st->update_interval == 125)
usleep_range(15000, 20000);
ret = regmap_read(st->regmap, MAX31827_T_REG, &uval);
mutex_unlock(&st->lock);
if (ret)
break;
*val = MAX31827_16_BIT_TO_M_DGR(uval);
break;
case hwmon_temp_max:
ret = regmap_read(st->regmap, MAX31827_TH_REG, &uval);
if (ret)
break;
*val = MAX31827_16_BIT_TO_M_DGR(uval);
break;
case hwmon_temp_max_hyst:
ret = regmap_read(st->regmap, MAX31827_TH_HYST_REG,
&uval);
if (ret)
break;
*val = MAX31827_16_BIT_TO_M_DGR(uval);
break;
case hwmon_temp_max_alarm:
ret = regmap_read(st->regmap,
MAX31827_CONFIGURATION_REG, &uval);
if (ret)
break;
*val = FIELD_GET(MAX31827_CONFIGURATION_O_TEMP_STAT_MASK,
uval);
break;
case hwmon_temp_min:
ret = regmap_read(st->regmap, MAX31827_TL_REG, &uval);
if (ret)
break;
*val = MAX31827_16_BIT_TO_M_DGR(uval);
break;
case hwmon_temp_min_hyst:
ret = regmap_read(st->regmap, MAX31827_TL_HYST_REG,
&uval);
if (ret)
break;
*val = MAX31827_16_BIT_TO_M_DGR(uval);
break;
case hwmon_temp_min_alarm:
ret = regmap_read(st->regmap,
MAX31827_CONFIGURATION_REG, &uval);
if (ret)
break;
*val = FIELD_GET(MAX31827_CONFIGURATION_U_TEMP_STAT_MASK,
uval);
break;
default:
ret = -EOPNOTSUPP;
break;
}
break;
case hwmon_chip:
if (attr == hwmon_chip_update_interval) {
ret = regmap_read(st->regmap,
MAX31827_CONFIGURATION_REG, &uval);
if (ret)
break;
uval = FIELD_GET(MAX31827_CONFIGURATION_CNV_RATE_MASK,
uval);
*val = max31827_conversions[uval];
}
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static int max31827_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct max31827_state *st = dev_get_drvdata(dev);
int res = 1;
int ret;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_enable:
if (val >> 1)
return -EINVAL;
mutex_lock(&st->lock);
/**
* The chip should not be enabled while a conversion is
* performed. Neither should the chip be enabled when
* the alarm values are changed.
*/
st->enable = val;
ret = regmap_update_bits(st->regmap,
MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_1SHOT_MASK |
MAX31827_CONFIGURATION_CNV_RATE_MASK,
MAX31827_DEVICE_ENABLE(val));
mutex_unlock(&st->lock);
return ret;
case hwmon_temp_max:
return write_alarm_val(st, MAX31827_TH_REG, val);
case hwmon_temp_max_hyst:
return write_alarm_val(st, MAX31827_TH_HYST_REG, val);
case hwmon_temp_min:
return write_alarm_val(st, MAX31827_TL_REG, val);
case hwmon_temp_min_hyst:
return write_alarm_val(st, MAX31827_TL_HYST_REG, val);
default:
return -EOPNOTSUPP;
}
case hwmon_chip:
switch (attr) {
case hwmon_chip_update_interval:
if (!st->enable)
return -EINVAL;
/*
* Convert the desired conversion rate into register
* bits. res is already initialized with 1.
*
* This was inspired by lm73 driver.
*/
while (res < ARRAY_SIZE(max31827_conversions) &&
val < max31827_conversions[res])
res++;
if (res == ARRAY_SIZE(max31827_conversions))
res = ARRAY_SIZE(max31827_conversions) - 1;
res = FIELD_PREP(MAX31827_CONFIGURATION_CNV_RATE_MASK,
res);
ret = regmap_update_bits(st->regmap,
MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_CNV_RATE_MASK,
res);
if (ret)
return ret;
st->update_interval = val;
return 0;
case hwmon_chip_pec:
return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_PEC_EN_MASK,
val ? MAX31827_CONFIGURATION_PEC_EN_MASK : 0);
default:
return -EOPNOTSUPP;
}
default:
return -EOPNOTSUPP;
}
}
static ssize_t temp1_resolution_show(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct max31827_state *st = dev_get_drvdata(dev);
unsigned int val;
int ret;
ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &val);
if (ret)
return ret;
val = FIELD_GET(MAX31827_CONFIGURATION_RESOLUTION_MASK, val);
return scnprintf(buf, PAGE_SIZE, "%u\n", max31827_resolutions[val]);
}
static ssize_t temp1_resolution_store(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct max31827_state *st = dev_get_drvdata(dev);
unsigned int idx = 0;
unsigned int val;
int ret;
ret = kstrtouint(buf, 10, &val);
if (ret)
return ret;
/*
* Convert the desired resolution into register
* bits. idx is already initialized with 0.
*
* This was inspired by lm73 driver.
*/
while (idx < ARRAY_SIZE(max31827_resolutions) &&
val < max31827_resolutions[idx])
idx++;
if (idx == ARRAY_SIZE(max31827_resolutions))
idx = ARRAY_SIZE(max31827_resolutions) - 1;
st->resolution = idx;
ret = shutdown_write(st, MAX31827_CONFIGURATION_REG,
MAX31827_CONFIGURATION_RESOLUTION_MASK,
FIELD_PREP(MAX31827_CONFIGURATION_RESOLUTION_MASK,
idx));
return ret ? ret : count;
}
static DEVICE_ATTR_RW(temp1_resolution);
static struct attribute *max31827_attrs[] = {
&dev_attr_temp1_resolution.attr,
NULL
};
ATTRIBUTE_GROUPS(max31827);
static const struct i2c_device_id max31827_i2c_ids[] = {
{ "max31827", max31827 },
{ "max31828", max31828 },
{ "max31829", max31829 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids);
static int max31827_init_client(struct max31827_state *st,
struct device *dev)
{
struct fwnode_handle *fwnode;
unsigned int res = 0;
u32 data, lsb_idx;
enum chips type;
bool prop;
int ret;
fwnode = dev_fwnode(dev);
st->enable = true;
res |= MAX31827_DEVICE_ENABLE(1);
res |= MAX31827_CONFIGURATION_RESOLUTION_MASK;
prop = fwnode_property_read_bool(fwnode, "adi,comp-int");
res |= FIELD_PREP(MAX31827_CONFIGURATION_COMP_INT_MASK, prop);
prop = fwnode_property_read_bool(fwnode, "adi,timeout-enable");
res |= FIELD_PREP(MAX31827_CONFIGURATION_TIMEOUT_MASK, !prop);
type = (enum chips)(uintptr_t)device_get_match_data(dev);
if (fwnode_property_present(fwnode, "adi,alarm-pol")) {
ret = fwnode_property_read_u32(fwnode, "adi,alarm-pol", &data);
if (ret)
return ret;
res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK, !!data);
} else {
/*
* Set default value.
*/
switch (type) {
case max31827:
case max31828:
res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK,
MAX31827_ALRM_POL_LOW);
break;
case max31829:
res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK,
MAX31827_ALRM_POL_HIGH);
break;
default:
return -EOPNOTSUPP;
}
}
if (fwnode_property_present(fwnode, "adi,fault-q")) {
ret = fwnode_property_read_u32(fwnode, "adi,fault-q", &data);
if (ret)
return ret;
/*
* Convert the desired fault queue into register bits.
*/
if (data != 0)
lsb_idx = __ffs(data);
if (hweight32(data) != 1 || lsb_idx > 4) {
dev_err(dev, "Invalid data in adi,fault-q\n");
return -EINVAL;
}
res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK, lsb_idx);
} else {
/*
* Set default value.
*/
switch (type) {
case max31827:
res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK,
MAX31827_FLT_Q_1);
break;
case max31828:
case max31829:
res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK,
MAX31827_FLT_Q_4);
break;
default:
return -EOPNOTSUPP;
}
}
return regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, res);
}
static const struct hwmon_channel_info *max31827_info[] = {
HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT | HWMON_T_MIN |
HWMON_T_MIN_HYST | HWMON_T_MIN_ALARM |
HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_MAX_ALARM),
HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL | HWMON_C_PEC),
NULL,
};
static const struct hwmon_ops max31827_hwmon_ops = {
.is_visible = max31827_is_visible,
.read = max31827_read,
.write = max31827_write,
};
static const struct hwmon_chip_info max31827_chip_info = {
.ops = &max31827_hwmon_ops,
.info = max31827_info,
};
static int max31827_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct max31827_state *st;
int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
if (!st)
return -ENOMEM;
mutex_init(&st->lock);
st->regmap = devm_regmap_init_i2c(client, &max31827_regmap);
if (IS_ERR(st->regmap))
return dev_err_probe(dev, PTR_ERR(st->regmap),
"Failed to allocate regmap.\n");
err = devm_regulator_get_enable(dev, "vref");
if (err)
return dev_err_probe(dev, err, "failed to enable regulator\n");
err = max31827_init_client(st, dev);
if (err)
return err;
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, st,
&max31827_chip_info,
max31827_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct of_device_id max31827_of_match[] = {
{
.compatible = "adi,max31827",
.data = (void *)max31827
},
{
.compatible = "adi,max31828",
.data = (void *)max31828
},
{
.compatible = "adi,max31829",
.data = (void *)max31829
},
{ }
};
MODULE_DEVICE_TABLE(of, max31827_of_match);
static struct i2c_driver max31827_driver = {
.driver = {
.name = "max31827",
.of_match_table = max31827_of_match,
},
.probe = max31827_probe,
.id_table = max31827_i2c_ids,
};
module_i2c_driver(max31827_driver);
MODULE_AUTHOR("Daniel Matyas <daniel.matyas@analog.com>");
MODULE_DESCRIPTION("Maxim MAX31827 low-power temperature switch driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink