mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
3cfd590559
The correct symbol for OmniVision Technologies is 'ovti', so let's convert it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <robh@kernel.org>
52 lines
1.3 KiB
Plaintext
52 lines
1.3 KiB
Plaintext
Atmel Image Sensor Interface (ISI) SoC Camera Subsystem
|
|
----------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible: must be "atmel,at91sam9g45-isi"
|
|
- reg: physical base address and length of the registers set for the device;
|
|
- interrupts: should contain IRQ line for the ISI;
|
|
- clocks: list of clock specifiers, corresponding to entries in
|
|
the clock-names property;
|
|
- clock-names: must contain "isi_clk", which is the isi peripherial clock.
|
|
|
|
ISI supports a single port node with parallel bus. It should contain one
|
|
'port' child node with child 'endpoint' node. Please refer to the bindings
|
|
defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
isi: isi@f0034000 {
|
|
compatible = "atmel,at91sam9g45-isi";
|
|
reg = <0xf0034000 0x4000>;
|
|
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
|
|
clocks = <&isi_clk>;
|
|
clock-names = "isi_clk";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_isi>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
isi_0: endpoint {
|
|
remote-endpoint = <&ov2640_0>;
|
|
bus-width = <8>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@f0018000 {
|
|
ov2640: camera@0x30 {
|
|
compatible = "ovti,ov2640";
|
|
reg = <0x30>;
|
|
|
|
port {
|
|
ov2640_0: endpoint {
|
|
remote-endpoint = <&isi_0>;
|
|
bus-width = <8>;
|
|
};
|
|
};
|
|
};
|
|
};
|