mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 11:04:44 +08:00
bcb142f303
Convert the i.MX ESDHC binding to DT schema format using json-schema Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1592450578-30140-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Rob Herring <robh@kernel.org>
125 lines
3.8 KiB
YAML
125 lines
3.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
|
|
|
|
maintainers:
|
|
- Shawn Guo <shawn.guo@linaro.org>
|
|
|
|
allOf:
|
|
- $ref: "mmc-controller.yaml"
|
|
|
|
description: |
|
|
The Enhanced Secure Digital Host Controller on Freescale i.MX family
|
|
provides an interface for MMC, SD, and SDIO types of memory cards.
|
|
|
|
This file documents differences between the core properties described
|
|
by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- fsl,imx25-esdhc
|
|
- fsl,imx35-esdhc
|
|
- fsl,imx51-esdhc
|
|
- fsl,imx53-esdhc
|
|
- fsl,imx6q-usdhc
|
|
- fsl,imx6sl-usdhc
|
|
- fsl,imx6sx-usdhc
|
|
- fsl,imx6ull-usdhc
|
|
- fsl,imx7d-usdhc
|
|
- fsl,imx7ulp-usdhc
|
|
- fsl,imx8mq-usdhc
|
|
- fsl,imx8mm-usdhc
|
|
- fsl,imx8mn-usdhc
|
|
- fsl,imx8mp-usdhc
|
|
- fsl,imx8qm-usdhc
|
|
- fsl,imx8qxp-usdhc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
fsl,wp-controller:
|
|
description: |
|
|
boolean, if present, indicate to use controller internal write protection.
|
|
type: boolean
|
|
|
|
fsl,delay-line:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Specify the number of delay cells for override mode.
|
|
This is used to set the clock delay for DLL(Delay Line) on override mode
|
|
to select a proper data sampling window in case the clock quality is not good
|
|
due to signal path is too long on the board. Please refer to eSDHC/uSDHC
|
|
chapter, DLL (Delay Line) section in RM for details.
|
|
default: 0
|
|
|
|
voltage-ranges:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32-matrix'
|
|
description: |
|
|
Specify the voltage range in case there are software transparent level
|
|
shifters on the outputs of the controller. Two cells are required, first
|
|
cell specifies minimum slot voltage (mV), second cell specifies maximum
|
|
slot voltage (mV).
|
|
items:
|
|
items:
|
|
- description: value for minimum slot voltage
|
|
- description: value for maximum slot voltage
|
|
maxItems: 1
|
|
|
|
fsl,tuning-start-tap:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Specify the start delay cell point when send first CMD19 in tuning procedure.
|
|
default: 0
|
|
|
|
fsl,tuning-step:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Specify the increasing delay cell steps in tuning procedure.
|
|
The uSDHC use one delay cell as default increasing step to do tuning process.
|
|
This property allows user to change the tuning step to more than one delay
|
|
cells which is useful for some special boards or cards when the default
|
|
tuning step can't find the proper delay window within limited tuning retries.
|
|
default: 0
|
|
|
|
fsl,strobe-dll-delay-target:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Specify the strobe dll control slave delay target.
|
|
This delay target programming host controller loopback read clock, and this
|
|
property allows user to change the delay target for the strobe input read clock.
|
|
If not use this property, driver default set the delay target to value 7.
|
|
Only eMMC HS400 mode need to take care of this property.
|
|
default: 0
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
mmc@70004000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70004000 0x4000>;
|
|
interrupts = <1>;
|
|
fsl,wp-controller;
|
|
};
|
|
|
|
mmc@70008000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70008000 0x4000>;
|
|
interrupts = <2>;
|
|
cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
|
|
wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
|
|
};
|