mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 11:04:44 +08:00
30b1e7c4e2
Convert the Hitachi HD44780 Character LCD Controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rob Herring <robh@kernel.org>
97 lines
2.6 KiB
YAML
97 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Hitachi HD44780 Character LCD Controller
|
|
|
|
maintainers:
|
|
- Geert Uytterhoeven <geert@linux-m68k.org>
|
|
|
|
description:
|
|
The Hitachi HD44780 Character LCD Controller is commonly used on character
|
|
LCDs that can display one or more lines of text. It exposes an M6800 bus
|
|
interface, which can be used in either 4-bit or 8-bit mode.
|
|
|
|
properties:
|
|
compatible:
|
|
const: hit,hd44780
|
|
|
|
data-gpios:
|
|
description:
|
|
GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
|
|
DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
|
|
oneOf:
|
|
- maxItems: 4
|
|
- maxItems: 8
|
|
|
|
enable-gpios:
|
|
description:
|
|
GPIO pin connected to the "E" (Enable) signal line of the LCD
|
|
Controller's bus interface.
|
|
maxItems: 1
|
|
|
|
rs-gpios:
|
|
description:
|
|
GPIO pin connected to the "RS" (Register Select) signal line of the LCD
|
|
Controller's bus interface.
|
|
maxItems: 1
|
|
|
|
rw-gpios:
|
|
description:
|
|
GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
|
|
Controller's bus interface.
|
|
maxItems: 1
|
|
|
|
backlight-gpios:
|
|
description: GPIO pin used for enabling the LCD's backlight.
|
|
maxItems: 1
|
|
|
|
display-height-chars:
|
|
description: Height of the display, in character cells,
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 4
|
|
|
|
display-width-chars:
|
|
description: Width of the display, in character cells.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 64
|
|
|
|
internal-buffer-width:
|
|
description:
|
|
Internal buffer width (default is 40 for displays with 1 or 2 lines, and
|
|
display-width-chars for displays with more than 2 lines).
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 64
|
|
|
|
required:
|
|
- compatible
|
|
- data-gpios
|
|
- enable-gpios
|
|
- rs-gpios
|
|
- display-height-chars
|
|
- display-width-chars
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
auxdisplay {
|
|
compatible = "hit,hd44780";
|
|
|
|
data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
|
|
<&hc595 1 GPIO_ACTIVE_HIGH>,
|
|
<&hc595 2 GPIO_ACTIVE_HIGH>,
|
|
<&hc595 3 GPIO_ACTIVE_HIGH>;
|
|
enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
|
|
rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
display-height-chars = <2>;
|
|
display-width-chars = <16>;
|
|
};
|