Torstein Hegge e6135fe960 ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format ... freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by: B. Zhang <bb.zhang@free.fr> Signed-off-by: Torstein Hegge <hegge@resisty.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>		2013-05-17 08:05:34 +02:00
..
6fire	ALSA: USB: adjust for changed 3.8 USB API	2013-04-29 10:57:35 +02:00
caiaq	ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch	2013-04-30 09:19:02 +02:00
misc	ALSA: USB: adjust for changed 3.8 USB API	2013-04-29 10:57:35 +02:00
usx2y	ALSA: USB: adjust for changed 3.8 USB API	2013-04-29 10:57:35 +02:00
card.c	ALSA: usb-audio: Fix autopm error during probing	2013-04-25 07:46:51 +02:00
card.h	ALSA: snd-usb: add support for bit-reversed byte formats	2013-04-18 10:03:47 +02:00
clock.c	ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources	2013-04-26 07:37:09 +02:00
clock.h	ALSA: usb-audio: UAC2: do clock validity check earlier	2013-04-04 08:30:59 +02:00
debug.h	ALSA: usb-audio: make hwc_debug a noop in case HW_CONST_DEBUG is not set	2011-05-18 11:44:35 +02:00
endpoint.c	ALSA: USB: adjust for changed 3.8 USB API	2013-04-29 10:57:35 +02:00
endpoint.h	ALSA: usb-audio: spelling correction	2013-04-04 08:30:30 +02:00
format.c	ALSA: pcm_format_to_bits strong-typed conversion	2013-04-29 13:36:15 +02:00
format.h	ALSA: snd-usb: handle the bmFormats field as unsigned int	2013-03-18 08:47:04 +01:00
helper.c	ALSA: snd-usb-audio: set the timeout for usb control set messages to 5000 ms	2013-04-22 10:45:02 +02:00
helper.h	ALSA: usb-audio: increase control transfer timeout	2011-09-27 09:21:48 +02:00
Kconfig	ALSA: sound/usb: remove CONFIG_EXPERIMENTAL	2012-10-25 00:17:47 +02:00
Makefile	ALSA: snd-usb: move code from urb.c to endpoint.c	2011-09-14 17:07:03 +02:00
midi.c	ALSA: usb-audio: disable autopm for MIDI devices	2013-04-15 16:03:57 +02:00
midi.h	ALSA: usb-audio: add support for Akai MPD16	2010-05-21 17:12:30 +02:00
mixer_maps.c	ALSA: usb-audio: add support for M-Audio FT C600	2013-02-11 14:02:27 +01:00
mixer_quirks.c	ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*	2013-04-07 09:44:08 +02:00
mixer_quirks.h	ALSA: usb-mixer: factor out quirks	2010-03-12 12:20:26 +01:00
mixer.c	ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()	2013-03-20 08:43:00 +01:00
mixer.h	ALSA: usb-audio: add control index offset	2012-11-29 08:43:12 +01:00
pcm.c	ALSA: pcm_format_to_bits strong-typed conversion	2013-04-29 13:36:15 +02:00
pcm.h	ALSA: usb: refine delay information with USB frame counter	2011-09-12 10:30:20 +02:00
power.h	ALSA: usbaudio: implement USB autosuspend	2011-03-11 14:59:29 +01:00
proc.c	ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format	2013-05-17 08:05:34 +02:00
proc.h	ALSA: usb-audio: refactor code	2010-03-05 08:17:14 +01:00
quirks-table.h	ALSA: usb-audio: USB quirk for Yamaha THR10C	2013-04-25 07:48:21 +02:00
quirks.c	ASoC: More updates for v3.10	2013-04-18 16:24:31 +02:00
quirks.h	ALSA: snd-usb: add quirks handler for DSD streams	2013-04-18 10:03:53 +02:00
stream.c	ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT	2013-04-25 07:33:20 +02:00
stream.h	ALSA: snd-usb: re-order code	2011-09-14 17:07:02 +02:00
usbaudio.h	ALSA: usb-audio: UAC2: auto clock selection module param	2013-04-04 08:31:32 +02:00