korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-13 14:24:11 +08:00
Code Issues Packages Projects Releases Wiki Activity
3c2461facf
linux/drivers/clk/Kconfig
Linus Torvalds f8fd5c2483 This pull request is full of clk driver changes. In fact, there aren't any 
changes to the clk framework this time around. That's probably because everyone
 was on vacation (yours truly included). We did lose a couple clk drivers this
 time around because nobody was using those devices. That skews the diffstat a
 bit, but either way, nothing looks out of the ordinary here. The usual suspects
 are chugging along adding support for more SoCs and fixing bugs.
 
 If I had to choose, I'd say the theme for the past few months has been
 "polish". There's quite a few patches that migrate to
 devm_platform_ioremap_resource() in here. And there's more than a handful of
 patches that move the NR_CLKS define from the DT binding header to the driver.
 There's even patches that migrate drivers to use clk_parent_data and clk_hw to
 describe clk tree topology. It seems that the spring (summer?) cleaning bug got
 some folks, or the semiconductor shortage finally hit the software side.
 
 New Drivers:
  - StarFive JH7110 SoC clock drivers
  - Qualcomm IPQ5018 Global Clock Controller driver
  - Versa3 clk generator to support 48KHz playback/record with audio codec on
    RZ/G2L SMARC EVK
 
 Removed Drivers:
  - Remove non-OF mmp clk drivers
  - Remove OXNAS clk driver
 
 Updates:
  - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
  - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
  - Introduce kstrdup_and_replace() and use it
  - Add PLL rates for Rockchip rk3568
  - Add the display clock tree for Rockchip rv1126
  - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
  - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
  - Fix function name in a comment in ccu_mmc_timing.c
  - Parameter name correction for ccu_nkm_round_rate()
  - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
    parent rates when determining clock rates
  - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
  - Support finding closest (as opposed to closest but not higher) clock rate
    for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
  - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
  - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
    the interconnect drivers
  - Fix various PM runtime bugs across many Qualcomm clk drivers
  - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
  - Add network related resets on Qualcomm IPQ4019
  - Add a couple missing USB related clocks to Qualcomm IPQ9574
  - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
  - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
    added, while PCIe pipe clock, SDCC rcg ops are corrected
  - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
  - Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
  - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
    issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
    while sm8450 is corrected to use floor ops
  - Correct Qualcomm SM6350 GPU clock controller's clock supplies
  - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
  - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
  - Change the delay in the Qualcomm reset controller to fsleep() for correctness
  - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
  - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
    M3-W, and M3-N SoCs
  - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
  - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
  - Add the PDM IPC clock for i.MX93
  - Add 519.75MHz frequency support for i.MX9 PLL
  - Simplify the .determine_rate() implementation for i.MX GPR mux
  - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
  - Add the audio mux clock to i.MX8
  - Fix the SPLL2 MULT range for PLLv4
  - Update the SPLL2 type in i.MX8ULP
  - Fix the SAI4 clock on i.MX8MP
  - Add silicon revision print for i.MX25 on clocks init
  - Drop the return value from __mx25_clocks_init()
  - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
  - Drop restrictions for i.MX PLL14xx and fix its max prediv value
  - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
    glitch free switching
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav
 tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg
 CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx
 zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi
 wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4
 A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq
 TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf
 Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5
 9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx
 yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z
 X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p
 r4mpOmJS+G4=
 =h2Jz
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "This pull request is full of clk driver changes. In fact, there aren't
  any changes to the clk framework this time around. That's probably
  because everyone was on vacation (yours truly included). We did lose a
  couple clk drivers this time around because nobody was using those
  devices. That skews the diffstat a bit, but either way, nothing looks
  out of the ordinary here. The usual suspects are chugging along adding
  support for more SoCs and fixing bugs.

  If I had to choose, I'd say the theme for the past few months has been
  "polish". There's quite a few patches that migrate to
  devm_platform_ioremap_resource() in here. And there's more than a
  handful of patches that move the NR_CLKS define from the DT binding
  header to the driver. There's even patches that migrate drivers to use
  clk_parent_data and clk_hw to describe clk tree topology. It seems
  that the spring (summer?) cleaning bug got some folks, or the
  semiconductor shortage finally hit the software side.

  New Drivers:
   - StarFive JH7110 SoC clock drivers
   - Qualcomm IPQ5018 Global Clock Controller driver
   - Versa3 clk generator to support 48KHz playback/record with audio
     codec on RZ/G2L SMARC EVK

  Removed Drivers:
   - Remove non-OF mmp clk drivers
   - Remove OXNAS clk driver

  Updates:
   - Add __counted_by to struct clk_hw_onecell_data and struct
     spmi_pmic_div_clk_cc
   - Move defines for numbers of clks (NR_CLKS) from DT headers to
     drivers
   - Introduce kstrdup_and_replace() and use it
   - Add PLL rates for Rockchip rk3568
   - Add the display clock tree for Rockchip rv1126
   - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Convert sun9i-mmc clock to use
     devm_platform_get_and_ioremap_resource()
   - Fix function name in a comment in ccu_mmc_timing.c
   - Parameter name correction for ccu_nkm_round_rate()
   - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
     consider alternative parent rates when determining clock rates
   - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
   - Support finding closest (as opposed to closest but not higher)
     clock rate for NM, NKM, mux and div type clocks, as use it for
     Allwinner A64 pll-video0
   - Prefer current parent rate if able to generate ideal clock rate for
     Allwinner NKM clocks
   - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
     moved out to the interconnect drivers
   - Fix various PM runtime bugs across many Qualcomm clk drivers
   - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
   - Add network related resets on Qualcomm IPQ4019
   - Add a couple missing USB related clocks to Qualcomm IPQ9574
   - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
     controller
   - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
     and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
     corrected
   - Add missing GDSCs to and correct GDSCs for the SC8280XP global
     clock controller driver
   - Support retention for the Qualcomm SC8280XP display clock
     controller GDSCs.
   - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
     to fix issues with missing parent clocks across sc7180, sm7150,
     sm6350 and sm8250, while sm8450 is corrected to use floor ops
   - Correct Qualcomm SM6350 GPU clock controller's clock supplies
   - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
   - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
   - Change the delay in the Qualcomm reset controller to fsleep() for
     correctness
   - Extend the Qualcomm SM83550 Video clock controller to support
     SC8280XP
   - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
     R-Car H3, M3-W, and M3-N SoCs
   - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
   - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
   - Add the PDM IPC clock for i.MX93
   - Add 519.75MHz frequency support for i.MX9 PLL
   - Simplify the .determine_rate() implementation for i.MX GPR mux
   - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
   - Add the audio mux clock to i.MX8
   - Fix the SPLL2 MULT range for PLLv4
   - Update the SPLL2 type in i.MX8ULP
   - Fix the SAI4 clock on i.MX8MP
   - Add silicon revision print for i.MX25 on clocks init
   - Drop the return value from __mx25_clocks_init()
   - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
   - Drop restrictions for i.MX PLL14xx and fix its max prediv value
   - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
     allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  ...
2023-08-30 19:53:39 -07:00

521 lines
16 KiB
Plaintext
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_CLK_PREPARE
bool
config HAVE_LEGACY_CLK # TODO: Remove once all legacy users are migrated
bool
select HAVE_CLK
help
Select this option when the clock API in <linux/clk.h> is implemented
by platform/architecture code. This method is deprecated. Modern
code should select COMMON_CLK instead and not define a custom
'struct clk'.
menuconfig COMMON_CLK
bool "Common Clock Framework"
depends on !HAVE_LEGACY_CLK
select HAVE_CLK_PREPARE
select HAVE_CLK
select RATIONAL
help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
Architectures utilizing the common struct clk should select
this option.
if COMMON_CLK
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
source "drivers/clk/versatile/Kconfig"
config CLK_HSDK
bool "PLL Driver for HSDK platform"
depends on ARC_SOC_HSDK || COMPILE_TEST
depends on HAS_IOMEM
help
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
control.
config LMK04832
tristate "Ti LMK04832 JESD204B Compliant Clock Jitter Cleaner"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Texas Instruments' LMK04832 Ultra
Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
config COMMON_CLK_APPLE_NCO
tristate "Clock driver for Apple SoC NCOs"
depends on ARCH_APPLE || COMPILE_TEST
default ARCH_APPLE
help
This driver supports NCO (Numerically Controlled Oscillator) blocks
found on Apple SoCs such as t8103 (M1). The blocks are typically
generators of audio clocks.
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
help
This driver supports Maxim 77620/77686/77802 crystal oscillator
clock.
config COMMON_CLK_MAX9485
tristate "Maxim 9485 Programmable Clock Generator"
depends on I2C
help
This driver supports Maxim 9485 Programmable Audio Clock Generator
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
depends on MFD_RK8XX
help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
Clkout1 is always on, Clkout2 can off by control register.
config COMMON_CLK_HI655X
tristate "Clock driver for Hi655x" if EXPERT
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
select REGMAP
default MFD_HI655X_PMIC
help
This driver supports the hi655x PMIC clock. This
multi-function device has one fixed-rate oscillator, clocked
at 32KHz.
config COMMON_CLK_SCMI
tristate "Clock driver controlled via SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
This driver uses SCPI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SI5341
tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs Si5341 and Si5340 programmable clock
generators. Not all features of these chips are currently supported
by the driver, in particular it only supports XTAL input. The chip can
be pre-programmed to support other configurations and features not yet
implemented in the driver.
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
config COMMON_CLK_SI514
tristate "Clock driver for SiLabs 514 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Silicon Labs 514 programmable clock
generator.
config COMMON_CLK_SI544
tristate "Clock driver for SiLabs 544 devices"
depends on I2C
select REGMAP_I2C
help
This driver supports the Silicon Labs 544 programmable clock
generator.
config COMMON_CLK_SI570
tristate "Clock driver for SiLabs 570 and compatible devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
config COMMON_CLK_BM1880
bool "Clock driver for Bitmain BM1880 SoC"
depends on ARCH_BITMAIN || COMPILE_TEST
default ARCH_BITMAIN
help
This driver supports the clocks on Bitmain BM1880 SoC.
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_TPS68470
tristate "Clock Driver for TI TPS68470 PMIC"
depends on I2C
depends on INTEL_SKL_INT3472 || COMPILE_TEST
select REGMAP_I2C
help
This driver supports the clocks provided by the TPS68470 PMIC.
config COMMON_CLK_CDCE925
tristate "Clock driver for TI CDCE913/925/937/949 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the TI CDCE913/925/937/949 programmable clock
synthesizer. Each chip has different number of PLLs and outputs.
For example, the CDCE925 contains two PLLs with spread-spectrum
clocking support and five output dividers. The driver only supports
the following setup, and uses a fixed setting for the output muxes.
Y1 is derived from the input clock
Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.
config COMMON_CLK_CS2000_CP
tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for the CS2000 clock multiplier.
config COMMON_CLK_EN7523
bool "Clock driver for Airoha EN7523 SoC system clocks"
depends on OF
depends on ARCH_AIROHA || COMPILE_TEST
default ARCH_AIROHA
help
This driver provides the fixed clocks and gates present on Airoha
ARM silicon.
config COMMON_CLK_FSL_FLEXSPI
tristate "Clock driver for FlexSPI on Layerscape SoCs"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE && SPI_NXP_FLEXSPI
help
On Layerscape SoCs there is a special clock for the FlexSPI
interface.
config COMMON_CLK_FSL_SAI
bool "Clock driver for BCLK of Freescale SAI cores"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
help
This driver supports the Freescale SAI (Synchronous Audio Interface)
to be used as a generic clock output. Some SoCs have restrictions
regarding the possible pin multiplexer settings. Eg. on some SoCs
two SAI interfaces can only be enabled together. If just one is
needed, the BCLK pin of the second one can be used as general
purpose clock output. Ideally, it can be used to drive an audio
codec (sometimes known as MCLK).
config COMMON_CLK_GEMINI
bool "Clock driver for Cortina Systems Gemini SoC"
depends on ARCH_GEMINI || COMPILE_TEST
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
config COMMON_CLK_LAN966X
tristate "Generic Clock Controller driver for LAN966X SoC"
depends on HAS_IOMEM
depends on OF
depends on SOC_LAN966 || COMPILE_TEST
help
This driver provides support for Generic Clock Controller(GCK) on
LAN966X SoC. GCK generates and supplies clock to various peripherals
within the SoC.
config COMMON_CLK_ASPEED
bool "Clock driver for Aspeed BMC SoCs"
depends on ARCH_ASPEED || COMPILE_TEST
default ARCH_ASPEED
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Aspeed BMC platforms.
The G4 and G5 series, including the ast2400 and ast2500, are supported
by this driver.
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on HAS_IOMEM || COMPILE_TEST
depends on OF
help
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on OF
depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
config CLK_LS1028A_PLLDIG
tristate "Clock driver for LS1028A Display output"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE
help
This driver support the Display output interfaces(LCD, DPHY) pixel clocks
of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
features of the PLL are currently supported by the driver. By default,
configured bypass mode with this PLL.
config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default ARCH_XGENE
depends on ARM64 || COMPILE_TEST
help
Support for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_LOCHNAGAR
tristate "Cirrus Logic Lochnagar clock driver"
depends on MFD_LOCHNAGAR
help
This driver supports the clocking features of the Cirrus Logic
Lochnagar audio development board.
config COMMON_CLK_LOONGSON2
bool "Clock driver for Loongson-2 SoC"
depends on LOONGARCH || COMPILE_TEST
help
This driver provides support for clock controller on Loongson-2 SoC.
The clock controller can generates and supplies clock to various
peripherals within the SoC.
Say Y here to support Loongson-2 SoC clock driver.
config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
select MFD_SYSCON if ARCH_LPC18XX
help
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
help
Support for the Marvell PXA SoC.
config COMMON_CLK_RS9_PCIE
tristate "Clock driver for Renesas 9-series PCIe clock generators"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Renesas 9-series PCIe clock generator
models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ.
config COMMON_CLK_SI521XX
tristate "Clock driver for SkyWorks Si521xx PCIe clock generators"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the SkyWorks Si521xx PCIe clock generator
models Si52144/Si52146/Si52147.
config COMMON_CLK_VC3
tristate "Clock driver for Renesas VersaClock 3 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Renesas VersaClock 3 programmable clock
generators.
config COMMON_CLK_VC5
tristate "Clock driver for IDT VersaClock 5,6 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the IDT VersaClock 5 and VersaClock 6
programmable clock generators.
config COMMON_CLK_VC7
tristate "Clock driver for Renesas Versaclock 7 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
Renesas Versaclock7 is a family of configurable clock generator
and jitter attenuator ICs with fractional and integer dividers.
config COMMON_CLK_STM32MP135
def_bool COMMON_CLK && MACH_STM32MP13
help
Support for stm32mp135 SoC family clocks
config COMMON_CLK_STM32MP157
def_bool COMMON_CLK && MACH_STM32MP157
help
Support for stm32mp157 SoC family clocks
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
def_bool COMMON_CLK && MACH_STM32H743
help
Support for stm32h7 SoC family clocks
config COMMON_CLK_MMP2
def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
help
Support for Marvell MMP2 and MMP3 SoC clocks
config COMMON_CLK_MMP2_AUDIO
tristate "Clock driver for MMP2 Audio subsystem"
depends on COMMON_CLK_MMP2 || COMPILE_TEST
help
This driver supports clocks for Audio subsystem on MMP2 SoC.
config COMMON_CLK_BD718XX
tristate "Clock driver for 32K clk gates on ROHM PMICs"
depends on MFD_ROHM_BD718XX || MFD_ROHM_BD71828
help
This driver supports ROHM BD71837, BD71847, BD71850, BD71815
and BD71828 PMICs clock gates.
config COMMON_CLK_FIXED_MMIO
bool "Clock driver for Memory Mapped Fixed values"
depends on COMMON_CLK && OF
depends on HAS_IOMEM
help
Support for Memory Mapped IO Fixed clocks
config COMMON_CLK_K210
bool "Clock driver for the Canaan Kendryte K210 SoC"
depends on OF && RISCV && SOC_CANAAN
default SOC_CANAAN
help
Support for the Canaan Kendryte K210 RISC-V SoC clocks.
config COMMON_CLK_SP7021
tristate "Clock driver for Sunplus SP7021 SoC"
depends on SOC_SP7021 || COMPILE_TEST
default SOC_SP7021
help
This driver supports the Sunplus SP7021 SoC clocks.
It implements SP7021 PLLs/gate.
Not all features of the PLL are currently supported
by the driver.
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/imx/Kconfig"
source "drivers/clk/ingenic/Kconfig"
source "drivers/clk/keystone/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mstar/Kconfig"
source "drivers/clk/microchip/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/nuvoton/Kconfig"
source "drivers/clk/pistachio/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sifive/Kconfig"
source "drivers/clk/socfpga/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/starfive/Kconfig"
source "drivers/clk/sunxi/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/visconti/Kconfig"
source "drivers/clk/x86/Kconfig"
source "drivers/clk/xilinx/Kconfig"
source "drivers/clk/zynqmp/Kconfig"
# Kunit test cases
config CLK_KUNIT_TEST
tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit tests for the common clock framework.
config CLK_GATE_KUNIT_TEST
tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit test for the basic clk gate type.
endif
Reference in New Issue View Git Blame Copy Permalink