mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
5e36129f2b
The arrays containing the regulator's voltage ranges are currently named after the first ldo which uses such range. However, it sounds a lot clearer if those are named with the voltage range instead. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1bdff1d1f23753b69c8044160decfad1e8553d08.1627121912.git.mchehab+huawei@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
295 lines
7.7 KiB
C
295 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Device driver for regulators in Hisi IC
|
|
//
|
|
// Copyright (c) 2013 Linaro Ltd.
|
|
// Copyright (c) 2011 HiSilicon Ltd.
|
|
// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
|
|
//
|
|
// Guodong Xu <guodong.xu@linaro.org>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/hi6421-spmi-pmic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/spmi.h>
|
|
|
|
struct hi6421_spmi_reg_priv {
|
|
/* Serialize regulator enable logic */
|
|
struct mutex enable_mutex;
|
|
};
|
|
|
|
struct hi6421_spmi_reg_info {
|
|
struct regulator_desc desc;
|
|
u8 eco_mode_mask;
|
|
u32 eco_uA;
|
|
};
|
|
|
|
static const unsigned int range_1v5_to_2v0[] = {
|
|
1500000, 1550000, 1600000, 1650000,
|
|
1700000, 1725000, 1750000, 1775000,
|
|
1800000, 1825000, 1850000, 1875000,
|
|
1900000, 1925000, 1950000, 2000000
|
|
};
|
|
|
|
static const unsigned int range_1v725_to_1v9[] = {
|
|
1725000, 1750000, 1775000, 1800000,
|
|
1825000, 1850000, 1875000, 1900000
|
|
};
|
|
|
|
static const unsigned int range_1v75_to_3v3[] = {
|
|
1750000, 1800000, 1825000, 2800000,
|
|
2850000, 2950000, 3000000, 3300000
|
|
};
|
|
|
|
static const unsigned int range_1v8_to_3v0[] = {
|
|
1800000, 1850000, 2400000, 2600000,
|
|
2700000, 2850000, 2950000, 3000000
|
|
};
|
|
|
|
static const unsigned int range_2v5_to_3v3[] = {
|
|
2500000, 2600000, 2700000, 2800000,
|
|
3000000, 3100000, 3200000, 3300000
|
|
};
|
|
|
|
static const unsigned int range_2v6_to_3v3[] = {
|
|
2600000, 2700000, 2800000, 2900000,
|
|
3000000, 3100000, 3200000, 3300000
|
|
};
|
|
|
|
/**
|
|
* HI6421V600_LDO() - specify a LDO power line
|
|
* @_id: LDO id name string
|
|
* @vtable: voltage table
|
|
* @ereg: enable register
|
|
* @emask: enable mask
|
|
* @vreg: voltage select register
|
|
* @odelay: off/on delay time in uS
|
|
* @etime: enable time in uS
|
|
* @ecomask: eco mode mask
|
|
* @ecoamp: eco mode load uppler limit in uA
|
|
*/
|
|
#define HI6421V600_LDO(_id, vtable, ereg, emask, vreg, \
|
|
odelay, etime, ecomask, ecoamp) \
|
|
[hi6421v600_##_id] = { \
|
|
.desc = { \
|
|
.name = #_id, \
|
|
.of_match = of_match_ptr(#_id), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.ops = &hi6421_spmi_ldo_rops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = hi6421v600_##_id, \
|
|
.owner = THIS_MODULE, \
|
|
.volt_table = vtable, \
|
|
.n_voltages = ARRAY_SIZE(vtable), \
|
|
.vsel_mask = ARRAY_SIZE(vtable) - 1, \
|
|
.vsel_reg = vreg, \
|
|
.enable_reg = ereg, \
|
|
.enable_mask = emask, \
|
|
.enable_time = etime, \
|
|
.ramp_delay = etime, \
|
|
.off_on_delay = odelay, \
|
|
}, \
|
|
.eco_mode_mask = ecomask, \
|
|
.eco_uA = ecoamp, \
|
|
}
|
|
|
|
static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct hi6421_spmi_reg_priv *priv = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
|
|
/* cannot enable more than one regulator at one time */
|
|
mutex_lock(&priv->enable_mutex);
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask,
|
|
rdev->desc->enable_mask);
|
|
|
|
/* Avoid powering up multiple devices at the same time */
|
|
usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
|
|
|
|
mutex_unlock(&priv->enable_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct hi6421_spmi_reg_info *sreg;
|
|
unsigned int reg_val;
|
|
|
|
sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
|
|
regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val);
|
|
|
|
if (reg_val & sreg->eco_mode_mask)
|
|
return REGULATOR_MODE_IDLE;
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
struct hi6421_spmi_reg_info *sreg;
|
|
unsigned int val;
|
|
|
|
sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
if (!sreg->eco_mode_mask)
|
|
return -EINVAL;
|
|
|
|
val = sreg->eco_mode_mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
sreg->eco_mode_mask, val);
|
|
}
|
|
|
|
static unsigned int
|
|
hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
|
|
int input_uV, int output_uV,
|
|
int load_uA)
|
|
{
|
|
struct hi6421_spmi_reg_info *sreg;
|
|
|
|
sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
|
|
|
|
if (!sreg->eco_uA || ((unsigned int)load_uA > sreg->eco_uA))
|
|
return REGULATOR_MODE_NORMAL;
|
|
|
|
return REGULATOR_MODE_IDLE;
|
|
}
|
|
|
|
static const struct regulator_ops hi6421_spmi_ldo_rops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = hi6421_spmi_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.map_voltage = regulator_map_voltage_ascend,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_mode = hi6421_spmi_regulator_get_mode,
|
|
.set_mode = hi6421_spmi_regulator_set_mode,
|
|
.get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
|
|
};
|
|
|
|
/* HI6421v600 regulators with known registers */
|
|
enum hi6421_spmi_regulator_id {
|
|
hi6421v600_ldo3,
|
|
hi6421v600_ldo4,
|
|
hi6421v600_ldo9,
|
|
hi6421v600_ldo15,
|
|
hi6421v600_ldo16,
|
|
hi6421v600_ldo17,
|
|
hi6421v600_ldo33,
|
|
hi6421v600_ldo34,
|
|
};
|
|
|
|
static struct hi6421_spmi_reg_info regulator_info[] = {
|
|
HI6421V600_LDO(ldo3, range_1v5_to_2v0,
|
|
0x16, 0x01, 0x51,
|
|
20000, 120,
|
|
0, 0),
|
|
HI6421V600_LDO(ldo4, range_1v725_to_1v9,
|
|
0x17, 0x01, 0x52,
|
|
20000, 120,
|
|
0x10, 10000),
|
|
HI6421V600_LDO(ldo9, range_1v75_to_3v3,
|
|
0x1c, 0x01, 0x57,
|
|
20000, 360,
|
|
0x10, 10000),
|
|
HI6421V600_LDO(ldo15, range_1v8_to_3v0,
|
|
0x21, 0x01, 0x5c,
|
|
20000, 360,
|
|
0x10, 10000),
|
|
HI6421V600_LDO(ldo16, range_1v8_to_3v0,
|
|
0x22, 0x01, 0x5d,
|
|
20000, 360,
|
|
0x10, 10000),
|
|
HI6421V600_LDO(ldo17, range_2v5_to_3v3,
|
|
0x23, 0x01, 0x5e,
|
|
20000, 120,
|
|
0x10, 10000),
|
|
HI6421V600_LDO(ldo33, range_2v5_to_3v3,
|
|
0x32, 0x01, 0x6d,
|
|
20000, 120,
|
|
0, 0),
|
|
HI6421V600_LDO(ldo34, range_2v6_to_3v3,
|
|
0x33, 0x01, 0x6e,
|
|
20000, 120,
|
|
0, 0),
|
|
};
|
|
|
|
static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *pmic_dev = pdev->dev.parent;
|
|
struct regulator_config config = { };
|
|
struct hi6421_spmi_reg_priv *priv;
|
|
struct hi6421_spmi_reg_info *info;
|
|
struct device *dev = &pdev->dev;
|
|
struct hi6421_spmi_pmic *pmic;
|
|
struct regulator_dev *rdev;
|
|
int i;
|
|
|
|
/*
|
|
* This driver is meant to be called by hi6421-spmi-core,
|
|
* which should first set drvdata. If this doesn't happen, hit
|
|
* a warn on and return.
|
|
*/
|
|
pmic = dev_get_drvdata(pmic_dev);
|
|
if (WARN_ON(!pmic))
|
|
return -ENODEV;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&priv->enable_mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
|
|
info = ®ulator_info[i];
|
|
|
|
config.dev = pdev->dev.parent;
|
|
config.driver_data = priv;
|
|
config.regmap = pmic->regmap;
|
|
|
|
rdev = devm_regulator_register(dev, &info->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(dev, "failed to register %s\n",
|
|
info->desc.name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id hi6421_spmi_regulator_table[] = {
|
|
{ .name = "hi6421v600-regulator" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, hi6421_spmi_regulator_table);
|
|
|
|
static struct platform_driver hi6421_spmi_regulator_driver = {
|
|
.id_table = hi6421_spmi_regulator_table,
|
|
.driver = {
|
|
.name = "hi6421v600-regulator",
|
|
},
|
|
.probe = hi6421_spmi_regulator_probe,
|
|
};
|
|
module_platform_driver(hi6421_spmi_regulator_driver);
|
|
|
|
MODULE_DESCRIPTION("Hi6421v600 SPMI regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
|