mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
3acb64c07e
The platform data header was only used to pass platform data from board files. We now populate the regulators exclusively from device tree, so the header contents can be moved into the regulator drivers. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
474 lines
12 KiB
C
474 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
|
|
*
|
|
* This file is based on drivers/regulator/ab8500.c
|
|
*
|
|
* AB8500 external regulators
|
|
*
|
|
* ab8500-ext supports the following regulators:
|
|
* - VextSupply3
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
|
|
/* AB8500 external regulators */
|
|
enum ab8500_ext_regulator_id {
|
|
AB8500_EXT_SUPPLY1,
|
|
AB8500_EXT_SUPPLY2,
|
|
AB8500_EXT_SUPPLY3,
|
|
AB8500_NUM_EXT_REGULATORS,
|
|
};
|
|
|
|
struct ab8500_ext_regulator_cfg {
|
|
bool hwreq; /* requires hw mode or high power mode */
|
|
};
|
|
|
|
/* supply for VextSupply3 */
|
|
static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
|
|
/* SIM supply for 3 V SIM cards */
|
|
REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
|
|
};
|
|
|
|
/*
|
|
* AB8500 external regulators
|
|
*/
|
|
static struct regulator_init_data ab8500_ext_regulators[] = {
|
|
/* fixed Vbat supplies VSMPS1_EXT_1V8 */
|
|
[AB8500_EXT_SUPPLY1] = {
|
|
.constraints = {
|
|
.name = "ab8500-ext-supply1",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.initial_mode = REGULATOR_MODE_IDLE,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
},
|
|
/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
|
|
[AB8500_EXT_SUPPLY2] = {
|
|
.constraints = {
|
|
.name = "ab8500-ext-supply2",
|
|
.min_uV = 1360000,
|
|
.max_uV = 1360000,
|
|
},
|
|
},
|
|
/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
|
|
[AB8500_EXT_SUPPLY3] = {
|
|
.constraints = {
|
|
.name = "ab8500-ext-supply3",
|
|
.min_uV = 3400000,
|
|
.max_uV = 3400000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies =
|
|
ARRAY_SIZE(ab8500_ext_supply3_consumers),
|
|
.consumer_supplies = ab8500_ext_supply3_consumers,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_ext_regulator_info - ab8500 regulator information
|
|
* @dev: device pointer
|
|
* @desc: regulator description
|
|
* @cfg: regulator configuration (extension of regulator FW configuration)
|
|
* @update_bank: bank to control on/off
|
|
* @update_reg: register to control on/off
|
|
* @update_mask: mask to enable/disable and set mode of regulator
|
|
* @update_val: bits holding the regulator current mode
|
|
* @update_val_hp: bits to set EN pin active (LPn pin deactive)
|
|
* normally this means high power mode
|
|
* @update_val_lp: bits to set EN pin active and LPn pin active
|
|
* normally this means low power mode
|
|
* @update_val_hw: bits to set regulator pins in HW control
|
|
* SysClkReq pins and logic will choose mode
|
|
*/
|
|
struct ab8500_ext_regulator_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct ab8500_ext_regulator_cfg *cfg;
|
|
u8 update_bank;
|
|
u8 update_reg;
|
|
u8 update_mask;
|
|
u8 update_val;
|
|
u8 update_val_hp;
|
|
u8 update_val_lp;
|
|
u8 update_val_hw;
|
|
};
|
|
|
|
static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* To satisfy both HW high power request and SW request, the regulator
|
|
* must be on in high power.
|
|
*/
|
|
if (info->cfg && info->cfg->hwreq)
|
|
regval = info->update_val_hp;
|
|
else
|
|
regval = info->update_val;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set enable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(rdev_get_dev(rdev),
|
|
"%s-enable (bank, reg, mask, value): 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Set the regulator in HW request mode if configured
|
|
*/
|
|
if (info->cfg && info->cfg->hwreq)
|
|
regval = info->update_val_hw;
|
|
else
|
|
regval = 0;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set disable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):"
|
|
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg, ®val);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read 0x%x register\n", info->update_reg);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):"
|
|
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
|
|
if (((regval & info->update_mask) == info->update_val_lp) ||
|
|
((regval & info->update_mask) == info->update_val_hp))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
int ret = 0;
|
|
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
regval = info->update_val_hp;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
regval = info->update_val_lp;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If regulator is enabled and info->cfg->hwreq is set, the regulator
|
|
must be on in high power, so we don't need to write the register with
|
|
the same value.
|
|
*/
|
|
if (ab8500_ext_regulator_is_enabled(rdev) &&
|
|
!(info->cfg && info->cfg->hwreq)) {
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"Could not set regulator mode.\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(rdev_get_dev(rdev),
|
|
"%s-set_mode (bank, reg, mask, value): "
|
|
"0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
}
|
|
|
|
info->update_val = regval;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (info->update_val == info->update_val_hp)
|
|
ret = REGULATOR_MODE_NORMAL;
|
|
else if (info->update_val == info->update_val_lp)
|
|
ret = REGULATOR_MODE_IDLE;
|
|
else
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_ext_set_voltage(struct regulator_dev *rdev, int min_uV,
|
|
int max_uV, unsigned *selector)
|
|
{
|
|
struct regulation_constraints *regu_constraints = rdev->constraints;
|
|
|
|
if (!regu_constraints) {
|
|
dev_err(rdev_get_dev(rdev), "No regulator constraints\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (regu_constraints->min_uV == min_uV &&
|
|
regu_constraints->max_uV == max_uV)
|
|
return 0;
|
|
|
|
dev_err(rdev_get_dev(rdev),
|
|
"Requested min %duV max %duV != constrained min %duV max %duV\n",
|
|
min_uV, max_uV,
|
|
regu_constraints->min_uV, regu_constraints->max_uV);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
|
|
unsigned selector)
|
|
{
|
|
struct regulation_constraints *regu_constraints = rdev->constraints;
|
|
|
|
if (regu_constraints == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
/* return the uV for the fixed regulators */
|
|
if (regu_constraints->min_uV && regu_constraints->max_uV) {
|
|
if (regu_constraints->min_uV == regu_constraints->max_uV)
|
|
return regu_constraints->min_uV;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct regulator_ops ab8500_ext_regulator_ops = {
|
|
.enable = ab8500_ext_regulator_enable,
|
|
.disable = ab8500_ext_regulator_disable,
|
|
.is_enabled = ab8500_ext_regulator_is_enabled,
|
|
.set_mode = ab8500_ext_regulator_set_mode,
|
|
.get_mode = ab8500_ext_regulator_get_mode,
|
|
.set_voltage = ab8500_ext_set_voltage,
|
|
.list_voltage = ab8500_ext_list_voltage,
|
|
};
|
|
|
|
static struct ab8500_ext_regulator_info
|
|
ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = {
|
|
[AB8500_EXT_SUPPLY1] = {
|
|
.desc = {
|
|
.name = "VEXTSUPPLY1",
|
|
.of_match = of_match_ptr("ab8500_ext1"),
|
|
.ops = &ab8500_ext_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_EXT_SUPPLY1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
},
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x08,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_hp = 0x01,
|
|
.update_val_lp = 0x03,
|
|
.update_val_hw = 0x02,
|
|
},
|
|
[AB8500_EXT_SUPPLY2] = {
|
|
.desc = {
|
|
.name = "VEXTSUPPLY2",
|
|
.of_match = of_match_ptr("ab8500_ext2"),
|
|
.ops = &ab8500_ext_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_EXT_SUPPLY2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
},
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x08,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_hp = 0x04,
|
|
.update_val_lp = 0x0c,
|
|
.update_val_hw = 0x08,
|
|
},
|
|
[AB8500_EXT_SUPPLY3] = {
|
|
.desc = {
|
|
.name = "VEXTSUPPLY3",
|
|
.of_match = of_match_ptr("ab8500_ext3"),
|
|
.ops = &ab8500_ext_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_EXT_SUPPLY3,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
},
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x08,
|
|
.update_mask = 0x30,
|
|
.update_val = 0x10,
|
|
.update_val_hp = 0x10,
|
|
.update_val_lp = 0x30,
|
|
.update_val_hw = 0x20,
|
|
},
|
|
};
|
|
|
|
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
int i;
|
|
|
|
if (!ab8500) {
|
|
dev_err(&pdev->dev, "null mfd parent\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check for AB8500 2.x */
|
|
if (is_ab8500_2p0_or_earlier(ab8500)) {
|
|
struct ab8500_ext_regulator_info *info;
|
|
|
|
/* VextSupply3LPn is inverted on AB8500 2.x */
|
|
info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
|
|
info->update_val = 0x30;
|
|
info->update_val_hp = 0x30;
|
|
info->update_val_lp = 0x10;
|
|
}
|
|
|
|
/* register all regulators */
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
|
|
struct ab8500_ext_regulator_info *info = NULL;
|
|
|
|
/* assign per-regulator data */
|
|
info = &ab8500_ext_regulator_info[i];
|
|
info->dev = &pdev->dev;
|
|
info->cfg = (struct ab8500_ext_regulator_cfg *)
|
|
ab8500_ext_regulators[i].driver_data;
|
|
|
|
config.dev = &pdev->dev;
|
|
config.driver_data = info;
|
|
config.init_data = &ab8500_ext_regulators[i];
|
|
|
|
/* register regulator with framework */
|
|
rdev = devm_regulator_register(&pdev->dev, &info->desc,
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
info->desc.name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "%s-probed\n", info->desc.name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_ext_regulator_driver = {
|
|
.probe = ab8500_ext_regulator_probe,
|
|
.driver = {
|
|
.name = "ab8500-ext-regulator",
|
|
},
|
|
};
|
|
|
|
static int __init ab8500_ext_regulator_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&ab8500_ext_regulator_driver);
|
|
if (ret)
|
|
pr_err("Failed to register ab8500 ext regulator: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(ab8500_ext_regulator_init);
|
|
|
|
static void __exit ab8500_ext_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&ab8500_ext_regulator_driver);
|
|
}
|
|
module_exit(ab8500_ext_regulator_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
|
|
MODULE_DESCRIPTION("AB8500 external regulator driver");
|
|
MODULE_ALIAS("platform:ab8500-ext-regulator");
|