mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 19:45:06 +08:00
9dfc160089
The board typically has 2 populated SFF interfaces. The mv88e6xxx driver currently supports SFF modules connected to ports 9 and 10 of the mv88e6390. Add support for sff2, which is connected to port 9. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
496 lines
10 KiB
Plaintext
496 lines
10 KiB
Plaintext
/*
|
|
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
|
|
*
|
|
* Based on an original 'vf610-twr.dts' which is Copyright 2015,
|
|
* Freescale Semiconductor, Inc.
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "vf610-zii-dev.dtsi"
|
|
|
|
/ {
|
|
model = "ZII VF610 Development Board, Rev C";
|
|
compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
|
|
|
|
mdio-mux {
|
|
compatible = "mdio-mux-gpio";
|
|
pinctrl-0 = <&pinctrl_mdio_mux>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
|
|
&gpio0 9 GPIO_ACTIVE_HIGH
|
|
&gpio0 25 GPIO_ACTIVE_HIGH>;
|
|
mdio-parent-bus = <&mdio1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio_mux_1: mdio@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch0: switch@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
pinctrl-0 = <&pinctrl_gpio_switch0>;
|
|
pinctrl-names = "default";
|
|
reg = <0>;
|
|
dsa,member = <0 0>;
|
|
eeprom-length = <65536>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "cpu";
|
|
ethernet = <&fec1>;
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&switch0phy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&switch0phy2>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&switch0phy3>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
phy-handle = <&switch0phy4>;
|
|
};
|
|
|
|
switch0port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "xaui";
|
|
link = <&switch1port10>;
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch0phy1: switch0phy@1 {
|
|
reg = <1>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch0phy2: switch0phy@2 {
|
|
reg = <2>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch0phy3: switch0phy@3 {
|
|
reg = <3>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch0phy4: switch0phy@4 {
|
|
reg = <4>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio_mux_2: mdio@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch1: switch@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
pinctrl-0 = <&pinctrl_gpio_switch1>;
|
|
pinctrl-names = "default";
|
|
reg = <0>;
|
|
dsa,member = <0 1>;
|
|
eeprom-length = <65536>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan5";
|
|
phy-handle = <&switch1phy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan6";
|
|
phy-handle = <&switch1phy2>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan7";
|
|
phy-handle = <&switch1phy3>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan8";
|
|
phy-handle = <&switch1phy4>;
|
|
};
|
|
|
|
port@9 {
|
|
reg = <9>;
|
|
label = "sff2";
|
|
phy-mode = "sgmii";
|
|
managed = "in-band-status";
|
|
sfp = <&sff2>;
|
|
};
|
|
|
|
switch1port10: port@10 {
|
|
reg = <10>;
|
|
label = "dsa";
|
|
phy-mode = "xaui";
|
|
link = <&switch0port10>;
|
|
};
|
|
};
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch1phy1: switch1phy@1 {
|
|
reg = <1>;
|
|
interrupt-parent = <&switch1>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch1phy2: switch1phy@2 {
|
|
reg = <2>;
|
|
interrupt-parent = <&switch1>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch1phy3: switch1phy@3 {
|
|
reg = <3>;
|
|
interrupt-parent = <&switch1>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
switch1phy4: switch1phy@4 {
|
|
reg = <4>;
|
|
interrupt-parent = <&switch1>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio_mux_4: mdio@4 {
|
|
reg = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
sff2: sff2 {
|
|
/* lower */
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff2_i2c>;
|
|
los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sff3: sff3 {
|
|
/* upper */
|
|
compatible = "sff,sff";
|
|
i2c-bus = <&sff3_i2c>;
|
|
los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&dspi0 {
|
|
bus-num = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi0>;
|
|
status = "okay";
|
|
spi-num-chipselects = <2>;
|
|
|
|
m25p128@0 {
|
|
compatible = "m25p128", "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
};
|
|
|
|
atzb-rf-233@1 {
|
|
compatible = "atmel,at86rf233";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctr_atzb_rf_233>;
|
|
|
|
spi-max-frequency = <7500000>;
|
|
reg = <1>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gpio3>;
|
|
xtal-trim = /bits/ 8 <0x06>;
|
|
|
|
sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
|
|
reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
|
|
|
|
fsl,spi-cs-sck-delay = <180>;
|
|
fsl,spi-sck-cs-delay = <250>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
/*
|
|
* U712
|
|
*
|
|
* Exposed signals:
|
|
* P1 - WE2_CMD
|
|
* P2 - WE2_CLK
|
|
*/
|
|
gpio5: pca9557@18 {
|
|
compatible = "nxp,pca9557";
|
|
reg = <0x18>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
/*
|
|
* U121
|
|
*
|
|
* Exposed signals:
|
|
* I/O0 - ENET_SWR_EN
|
|
* I/O1 - ESW1_RESETn
|
|
* I/O2 - ARINC_RESET
|
|
* I/O3 - DD1_IO_RESET
|
|
* I/O4 - ESW2_RESETn
|
|
* I/O5 - ESW3_RESETn
|
|
* I/O6 - ESW4_RESETn
|
|
* I/O8 - TP909
|
|
* I/O9 - FEM_SEL
|
|
* I/O10 - WIFI_RESETn
|
|
* I/O11 - PHY_RSTn
|
|
* I/O12 - OPT1_SD
|
|
* I/O13 - OPT2_SD
|
|
* I/O14 - OPT1_TX_DIS
|
|
* I/O15 - OPT2_TX_DIS
|
|
*/
|
|
gpio6: sx1503@20 {
|
|
compatible = "semtech,sx1503q";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sx1503_20>;
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
};
|
|
|
|
/*
|
|
* U715
|
|
*
|
|
* Exposed signals:
|
|
* IO0 - WE1_CLK
|
|
* IO1 - WE1_CMD
|
|
*/
|
|
gpio7: pca9554@22 {
|
|
compatible = "nxp,pca9554";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
at24mac602@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
tca9548@70 {
|
|
compatible = "nxp,pca9548";
|
|
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x70>;
|
|
reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
sff2_i2c: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
|
|
sff3_i2c: i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio0 {
|
|
eth0_intrp {
|
|
gpio-hog;
|
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
line-name = "sx1503-irq";
|
|
};
|
|
};
|
|
|
|
&gpio3 {
|
|
eth0_intrp {
|
|
gpio-hog;
|
|
gpios = <2 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
line-name = "eth0-intrp";
|
|
};
|
|
};
|
|
|
|
&fec0 {
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec0_phy_int>;
|
|
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB2__GPIO_24 0x31c2
|
|
VF610_PAD_PTE27__GPIO_132 0x33e2
|
|
>;
|
|
};
|
|
|
|
|
|
pinctrl_sx1503_20: pinctrl-sx1503-20 {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB1__GPIO_23 0x219d
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA20__UART3_TX 0x21a2
|
|
VF610_PAD_PTA21__UART3_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_mdio_mux: pinctrl-mdio-mux {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA18__GPIO_8 0x31c2
|
|
VF610_PAD_PTA19__GPIO_9 0x31c2
|
|
VF610_PAD_PTB3__GPIO_25 0x31c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB28__GPIO_98 0x219d
|
|
>;
|
|
};
|
|
};
|