mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
3b68ae73d8
The prototype and defination of functions usb_ehci_init and usb_ohci_init are removed. The ehci and ohci devices are removed since usbhs device contains both ehci and ohci details. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
575 lines
17 KiB
C
575 lines
17 KiB
C
/*
|
|
* usb-host.c - OMAP USB Host
|
|
*
|
|
* This file will contain the board specific details for the
|
|
* Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
|
|
*
|
|
* Copyright (C) 2007-2011 Texas Instruments
|
|
* Author: Vikram Pandita <vikram.pandita@ti.com>
|
|
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
|
|
*
|
|
* Generalization by:
|
|
* Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <plat/usb.h>
|
|
|
|
#include "mux.h"
|
|
|
|
#ifdef CONFIG_MFD_OMAP_USB_HOST
|
|
|
|
#define OMAP_USBHS_DEVICE "usbhs-omap"
|
|
|
|
static struct resource usbhs_resources[] = {
|
|
{
|
|
.name = "uhh",
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "tll",
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "ehci",
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "ehci-irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "ohci",
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "ohci-irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device usbhs_device = {
|
|
.name = OMAP_USBHS_DEVICE,
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(usbhs_resources),
|
|
.resource = usbhs_resources,
|
|
};
|
|
|
|
static struct usbhs_omap_platform_data usbhs_data;
|
|
static struct ehci_hcd_omap_platform_data ehci_data;
|
|
static struct ohci_hcd_omap_platform_data ohci_data;
|
|
|
|
/* MUX settings for EHCI pins */
|
|
/*
|
|
* setup_ehci_io_mux - initialize IO pad mux for USBHOST
|
|
*/
|
|
static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb1_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb1_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb1_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (port_mode[1]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb2_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb2_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb2_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (port_mode[2]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("hsusb3_tll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("hsusb3_tll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("hsusb3_tll_data7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("usbb1_ulpiphy_stp",
|
|
OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("usbb1_ulpiphy_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpiphy_dat7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("usbb1_ulpitll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("usbb1_ulpitll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_ulpitll_dat7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
default:
|
|
break;
|
|
}
|
|
switch (port_mode[1]) {
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
omap_mux_init_signal("usbb2_ulpiphy_stp",
|
|
OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("usbb2_ulpiphy_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpiphy_dat7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
omap_mux_init_signal("usbb2_ulpitll_stp",
|
|
OMAP_PIN_INPUT_PULLUP);
|
|
omap_mux_init_signal("usbb2_ulpitll_clk",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dir",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_nxt",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat1",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat2",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat3",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat4",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat5",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat6",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_ulpitll_dat7",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm1_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm1_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm1_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm1_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm1_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
switch (port_mode[1]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm2_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm2_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm2_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm2_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm2_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
switch (port_mode[2]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("mm3_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm3_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("mm3_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
|
|
/* FALLTHROUGH */
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("mm3_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("mm3_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
/* FALLTHROUGH */
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
|
|
{
|
|
switch (port_mode[0]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("usbb1_mm_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_mm_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("usbb1_mm_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("usbb1_mm_txen",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("usbb1_mm_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb1_mm_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (port_mode[1]) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
omap_mux_init_signal("usbb2_mm_rxdp",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_mm_rxdm",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
omap_mux_init_signal("usbb2_mm_rxrcv",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
omap_mux_init_signal("usbb2_mm_txen",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
omap_mux_init_signal("usbb2_mm_txdat",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
omap_mux_init_signal("usbb2_mm_txse0",
|
|
OMAP_PIN_INPUT_PULLDOWN);
|
|
break;
|
|
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
|
|
usbhs_data.port_mode[i] = pdata->port_mode[i];
|
|
ohci_data.port_mode[i] = pdata->port_mode[i];
|
|
ehci_data.port_mode[i] = pdata->port_mode[i];
|
|
ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
|
|
ehci_data.regulator[i] = pdata->regulator[i];
|
|
}
|
|
ehci_data.phy_reset = pdata->phy_reset;
|
|
ohci_data.es2_compatibility = pdata->es2_compatibility;
|
|
usbhs_data.ehci_data = &ehci_data;
|
|
usbhs_data.ohci_data = &ohci_data;
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
|
|
usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
|
|
usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
|
|
usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
|
|
usbhs_resources[2].start = OMAP34XX_EHCI_BASE;
|
|
usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1;
|
|
usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
|
|
usbhs_resources[4].start = OMAP34XX_OHCI_BASE;
|
|
usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1;
|
|
usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
|
|
setup_ehci_io_mux(pdata->port_mode);
|
|
setup_ohci_io_mux(pdata->port_mode);
|
|
} else if (cpu_is_omap44xx()) {
|
|
usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
|
|
usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
|
|
usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
|
|
usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
|
|
usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
|
|
usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
|
|
usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
|
|
usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
|
|
usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
|
|
usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
|
|
setup_4430ehci_io_mux(pdata->port_mode);
|
|
setup_4430ohci_io_mux(pdata->port_mode);
|
|
}
|
|
|
|
if (platform_device_add_data(&usbhs_device,
|
|
&usbhs_data, sizeof(usbhs_data)) < 0) {
|
|
printk(KERN_ERR "USBHS platform_device_add_data failed\n");
|
|
goto init_end;
|
|
}
|
|
|
|
if (platform_device_register(&usbhs_device) < 0)
|
|
printk(KERN_ERR "USBHS platform_device_register failed\n");
|
|
|
|
init_end:
|
|
return;
|
|
}
|
|
|
|
#else
|
|
|
|
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
|