mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
bcdb6fd4f3
Slot capabilities are currently not reported because emulated bridge does not report the PCI_EXP_FLAGS_SLOT flag. Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers are supported. Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read function to static buffer as it is only statically filled the PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this register. Set Presence State Bit to 1 since there is no support for unplugging the card and there is currently no platform able to detect presence of a card - in such a case the bit needs to be set to 1. Finally correctly set Physical Slot Number to 1 since there is only one port and zero value is reserved for ports within the same silicon as Root Port which is not our case for Aardvark HW. Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012 lines
59 KiB
C
2012 lines
59 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the Aardvark PCIe controller, used on Marvell Armada
|
|
* 3700.
|
|
*
|
|
* Copyright (C) 2016 Marvell
|
|
*
|
|
* Author: Hezi Shahmoon <hezi.shahmoon@marvell.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci-ecam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_pci.h>
|
|
|
|
#include "../pci.h"
|
|
#include "../pci-bridge-emul.h"
|
|
|
|
/* PCIe core registers */
|
|
#define PCIE_CORE_DEV_ID_REG 0x0
|
|
#define PCIE_CORE_CMD_STATUS_REG 0x4
|
|
#define PCIE_CORE_DEV_REV_REG 0x8
|
|
#define PCIE_CORE_PCIEXP_CAP 0xc0
|
|
#define PCIE_CORE_PCIERR_CAP 0x100
|
|
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
|
|
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
|
|
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6)
|
|
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK BIT(7)
|
|
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV BIT(8)
|
|
/* PIO registers base address and register offsets */
|
|
#define PIO_BASE_ADDR 0x4000
|
|
#define PIO_CTRL (PIO_BASE_ADDR + 0x0)
|
|
#define PIO_CTRL_TYPE_MASK GENMASK(3, 0)
|
|
#define PIO_CTRL_ADDR_WIN_DISABLE BIT(24)
|
|
#define PIO_STAT (PIO_BASE_ADDR + 0x4)
|
|
#define PIO_COMPLETION_STATUS_SHIFT 7
|
|
#define PIO_COMPLETION_STATUS_MASK GENMASK(9, 7)
|
|
#define PIO_COMPLETION_STATUS_OK 0
|
|
#define PIO_COMPLETION_STATUS_UR 1
|
|
#define PIO_COMPLETION_STATUS_CRS 2
|
|
#define PIO_COMPLETION_STATUS_CA 4
|
|
#define PIO_NON_POSTED_REQ BIT(10)
|
|
#define PIO_ERR_STATUS BIT(11)
|
|
#define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8)
|
|
#define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc)
|
|
#define PIO_WR_DATA (PIO_BASE_ADDR + 0x10)
|
|
#define PIO_WR_DATA_STRB (PIO_BASE_ADDR + 0x14)
|
|
#define PIO_RD_DATA (PIO_BASE_ADDR + 0x18)
|
|
#define PIO_START (PIO_BASE_ADDR + 0x1c)
|
|
#define PIO_ISR (PIO_BASE_ADDR + 0x20)
|
|
#define PIO_ISRM (PIO_BASE_ADDR + 0x24)
|
|
|
|
/* Aardvark Control registers */
|
|
#define CONTROL_BASE_ADDR 0x4800
|
|
#define PCIE_CORE_CTRL0_REG (CONTROL_BASE_ADDR + 0x0)
|
|
#define PCIE_GEN_SEL_MSK 0x3
|
|
#define PCIE_GEN_SEL_SHIFT 0x0
|
|
#define SPEED_GEN_1 0
|
|
#define SPEED_GEN_2 1
|
|
#define SPEED_GEN_3 2
|
|
#define IS_RC_MSK 1
|
|
#define IS_RC_SHIFT 2
|
|
#define LANE_CNT_MSK 0x18
|
|
#define LANE_CNT_SHIFT 0x3
|
|
#define LANE_COUNT_1 (0 << LANE_CNT_SHIFT)
|
|
#define LANE_COUNT_2 (1 << LANE_CNT_SHIFT)
|
|
#define LANE_COUNT_4 (2 << LANE_CNT_SHIFT)
|
|
#define LANE_COUNT_8 (3 << LANE_CNT_SHIFT)
|
|
#define LINK_TRAINING_EN BIT(6)
|
|
#define LEGACY_INTA BIT(28)
|
|
#define LEGACY_INTB BIT(29)
|
|
#define LEGACY_INTC BIT(30)
|
|
#define LEGACY_INTD BIT(31)
|
|
#define PCIE_CORE_CTRL1_REG (CONTROL_BASE_ADDR + 0x4)
|
|
#define HOT_RESET_GEN BIT(0)
|
|
#define PCIE_CORE_CTRL2_REG (CONTROL_BASE_ADDR + 0x8)
|
|
#define PCIE_CORE_CTRL2_RESERVED 0x7
|
|
#define PCIE_CORE_CTRL2_TD_ENABLE BIT(4)
|
|
#define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
|
|
#define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6)
|
|
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
|
|
#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
|
|
#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
|
|
#define PCIE_CORE_REF_CLK_RX_ENABLE BIT(2)
|
|
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
|
|
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
|
|
#define PCIE_MSG_PM_PME_MASK BIT(7)
|
|
#define PCIE_ISR0_MASK_REG (CONTROL_BASE_ADDR + 0x44)
|
|
#define PCIE_ISR0_MSI_INT_PENDING BIT(24)
|
|
#define PCIE_ISR0_CORR_ERR BIT(11)
|
|
#define PCIE_ISR0_NFAT_ERR BIT(12)
|
|
#define PCIE_ISR0_FAT_ERR BIT(13)
|
|
#define PCIE_ISR0_ERR_MASK GENMASK(13, 11)
|
|
#define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val))
|
|
#define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val))
|
|
#define PCIE_ISR0_ALL_MASK GENMASK(31, 0)
|
|
#define PCIE_ISR1_REG (CONTROL_BASE_ADDR + 0x48)
|
|
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
|
|
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
|
|
#define PCIE_ISR1_FLUSH BIT(5)
|
|
#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
|
|
#define PCIE_ISR1_ALL_MASK GENMASK(31, 0)
|
|
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
|
|
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
|
|
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
|
|
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
|
|
#define PCIE_MSI_ALL_MASK GENMASK(31, 0)
|
|
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
|
|
#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
|
|
|
|
/* PCIe window configuration */
|
|
#define OB_WIN_BASE_ADDR 0x4c00
|
|
#define OB_WIN_BLOCK_SIZE 0x20
|
|
#define OB_WIN_COUNT 8
|
|
#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
|
|
OB_WIN_BLOCK_SIZE * (win) + \
|
|
(offset))
|
|
#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
|
|
#define OB_WIN_ENABLE BIT(0)
|
|
#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
|
|
#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
|
|
#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
|
|
#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
|
|
#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
|
|
#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
|
|
#define OB_WIN_DEFAULT_ACTIONS (OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
|
|
#define OB_WIN_FUNC_NUM_MASK GENMASK(31, 24)
|
|
#define OB_WIN_FUNC_NUM_SHIFT 24
|
|
#define OB_WIN_FUNC_NUM_ENABLE BIT(23)
|
|
#define OB_WIN_BUS_NUM_BITS_MASK GENMASK(22, 20)
|
|
#define OB_WIN_BUS_NUM_BITS_SHIFT 20
|
|
#define OB_WIN_MSG_CODE_ENABLE BIT(22)
|
|
#define OB_WIN_MSG_CODE_MASK GENMASK(21, 14)
|
|
#define OB_WIN_MSG_CODE_SHIFT 14
|
|
#define OB_WIN_MSG_PAYLOAD_LEN BIT(12)
|
|
#define OB_WIN_ATTR_ENABLE BIT(11)
|
|
#define OB_WIN_ATTR_TC_MASK GENMASK(10, 8)
|
|
#define OB_WIN_ATTR_TC_SHIFT 8
|
|
#define OB_WIN_ATTR_RELAXED BIT(7)
|
|
#define OB_WIN_ATTR_NOSNOOP BIT(6)
|
|
#define OB_WIN_ATTR_POISON BIT(5)
|
|
#define OB_WIN_ATTR_IDO BIT(4)
|
|
#define OB_WIN_TYPE_MASK GENMASK(3, 0)
|
|
#define OB_WIN_TYPE_SHIFT 0
|
|
#define OB_WIN_TYPE_MEM 0x0
|
|
#define OB_WIN_TYPE_IO 0x4
|
|
#define OB_WIN_TYPE_CONFIG_TYPE0 0x8
|
|
#define OB_WIN_TYPE_CONFIG_TYPE1 0x9
|
|
#define OB_WIN_TYPE_MSG 0xc
|
|
|
|
/* LMI registers base address and register offsets */
|
|
#define LMI_BASE_ADDR 0x6000
|
|
#define CFG_REG (LMI_BASE_ADDR + 0x0)
|
|
#define LTSSM_SHIFT 24
|
|
#define LTSSM_MASK 0x3f
|
|
#define RC_BAR_CONFIG 0x300
|
|
|
|
/* LTSSM values in CFG_REG */
|
|
enum {
|
|
LTSSM_DETECT_QUIET = 0x0,
|
|
LTSSM_DETECT_ACTIVE = 0x1,
|
|
LTSSM_POLLING_ACTIVE = 0x2,
|
|
LTSSM_POLLING_COMPLIANCE = 0x3,
|
|
LTSSM_POLLING_CONFIGURATION = 0x4,
|
|
LTSSM_CONFIG_LINKWIDTH_START = 0x5,
|
|
LTSSM_CONFIG_LINKWIDTH_ACCEPT = 0x6,
|
|
LTSSM_CONFIG_LANENUM_ACCEPT = 0x7,
|
|
LTSSM_CONFIG_LANENUM_WAIT = 0x8,
|
|
LTSSM_CONFIG_COMPLETE = 0x9,
|
|
LTSSM_CONFIG_IDLE = 0xa,
|
|
LTSSM_RECOVERY_RCVR_LOCK = 0xb,
|
|
LTSSM_RECOVERY_SPEED = 0xc,
|
|
LTSSM_RECOVERY_RCVR_CFG = 0xd,
|
|
LTSSM_RECOVERY_IDLE = 0xe,
|
|
LTSSM_L0 = 0x10,
|
|
LTSSM_RX_L0S_ENTRY = 0x11,
|
|
LTSSM_RX_L0S_IDLE = 0x12,
|
|
LTSSM_RX_L0S_FTS = 0x13,
|
|
LTSSM_TX_L0S_ENTRY = 0x14,
|
|
LTSSM_TX_L0S_IDLE = 0x15,
|
|
LTSSM_TX_L0S_FTS = 0x16,
|
|
LTSSM_L1_ENTRY = 0x17,
|
|
LTSSM_L1_IDLE = 0x18,
|
|
LTSSM_L2_IDLE = 0x19,
|
|
LTSSM_L2_TRANSMIT_WAKE = 0x1a,
|
|
LTSSM_DISABLED = 0x20,
|
|
LTSSM_LOOPBACK_ENTRY_MASTER = 0x21,
|
|
LTSSM_LOOPBACK_ACTIVE_MASTER = 0x22,
|
|
LTSSM_LOOPBACK_EXIT_MASTER = 0x23,
|
|
LTSSM_LOOPBACK_ENTRY_SLAVE = 0x24,
|
|
LTSSM_LOOPBACK_ACTIVE_SLAVE = 0x25,
|
|
LTSSM_LOOPBACK_EXIT_SLAVE = 0x26,
|
|
LTSSM_HOT_RESET = 0x27,
|
|
LTSSM_RECOVERY_EQUALIZATION_PHASE0 = 0x28,
|
|
LTSSM_RECOVERY_EQUALIZATION_PHASE1 = 0x29,
|
|
LTSSM_RECOVERY_EQUALIZATION_PHASE2 = 0x2a,
|
|
LTSSM_RECOVERY_EQUALIZATION_PHASE3 = 0x2b,
|
|
};
|
|
|
|
#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
|
|
|
|
/* PCIe core controller registers */
|
|
#define CTRL_CORE_BASE_ADDR 0x18000
|
|
#define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0)
|
|
#define CTRL_MODE_SHIFT 0x0
|
|
#define CTRL_MODE_MASK 0x1
|
|
#define PCIE_CORE_MODE_DIRECT 0x0
|
|
#define PCIE_CORE_MODE_COMMAND 0x1
|
|
|
|
/* PCIe Central Interrupts Registers */
|
|
#define CENTRAL_INT_BASE_ADDR 0x1b000
|
|
#define HOST_CTRL_INT_STATUS_REG (CENTRAL_INT_BASE_ADDR + 0x0)
|
|
#define HOST_CTRL_INT_MASK_REG (CENTRAL_INT_BASE_ADDR + 0x4)
|
|
#define PCIE_IRQ_CMDQ_INT BIT(0)
|
|
#define PCIE_IRQ_MSI_STATUS_INT BIT(1)
|
|
#define PCIE_IRQ_CMD_SENT_DONE BIT(3)
|
|
#define PCIE_IRQ_DMA_INT BIT(4)
|
|
#define PCIE_IRQ_IB_DXFERDONE BIT(5)
|
|
#define PCIE_IRQ_OB_DXFERDONE BIT(6)
|
|
#define PCIE_IRQ_OB_RXFERDONE BIT(7)
|
|
#define PCIE_IRQ_COMPQ_INT BIT(12)
|
|
#define PCIE_IRQ_DIR_RD_DDR_DET BIT(13)
|
|
#define PCIE_IRQ_DIR_WR_DDR_DET BIT(14)
|
|
#define PCIE_IRQ_CORE_INT BIT(16)
|
|
#define PCIE_IRQ_CORE_INT_PIO BIT(17)
|
|
#define PCIE_IRQ_DPMU_INT BIT(18)
|
|
#define PCIE_IRQ_PCIE_MIS_INT BIT(19)
|
|
#define PCIE_IRQ_MSI_INT1_DET BIT(20)
|
|
#define PCIE_IRQ_MSI_INT2_DET BIT(21)
|
|
#define PCIE_IRQ_RC_DBELL_DET BIT(22)
|
|
#define PCIE_IRQ_EP_STATUS BIT(23)
|
|
#define PCIE_IRQ_ALL_MASK GENMASK(31, 0)
|
|
#define PCIE_IRQ_ENABLE_INTS_MASK PCIE_IRQ_CORE_INT
|
|
|
|
/* Transaction types */
|
|
#define PCIE_CONFIG_RD_TYPE0 0x8
|
|
#define PCIE_CONFIG_RD_TYPE1 0x9
|
|
#define PCIE_CONFIG_WR_TYPE0 0xa
|
|
#define PCIE_CONFIG_WR_TYPE1 0xb
|
|
|
|
#define PIO_RETRY_CNT 750000 /* 1.5 s */
|
|
#define PIO_RETRY_DELAY 2 /* 2 us*/
|
|
|
|
#define LINK_WAIT_MAX_RETRIES 10
|
|
#define LINK_WAIT_USLEEP_MIN 90000
|
|
#define LINK_WAIT_USLEEP_MAX 100000
|
|
#define RETRAIN_WAIT_MAX_RETRIES 10
|
|
#define RETRAIN_WAIT_USLEEP_US 2000
|
|
|
|
#define MSI_IRQ_NUM 32
|
|
|
|
#define CFG_RD_CRS_VAL 0xffff0001
|
|
|
|
struct advk_pcie {
|
|
struct platform_device *pdev;
|
|
void __iomem *base;
|
|
struct {
|
|
phys_addr_t match;
|
|
phys_addr_t remap;
|
|
phys_addr_t mask;
|
|
u32 actions;
|
|
} wins[OB_WIN_COUNT];
|
|
u8 wins_count;
|
|
struct irq_domain *rp_irq_domain;
|
|
struct irq_domain *irq_domain;
|
|
struct irq_chip irq_chip;
|
|
raw_spinlock_t irq_lock;
|
|
struct irq_domain *msi_domain;
|
|
struct irq_domain *msi_inner_domain;
|
|
raw_spinlock_t msi_irq_lock;
|
|
DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
|
|
struct mutex msi_used_lock;
|
|
int link_gen;
|
|
struct pci_bridge_emul bridge;
|
|
struct gpio_desc *reset_gpio;
|
|
struct phy *phy;
|
|
};
|
|
|
|
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
|
|
{
|
|
writel(val, pcie->base + reg);
|
|
}
|
|
|
|
static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
|
|
{
|
|
return readl(pcie->base + reg);
|
|
}
|
|
|
|
static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
u8 ltssm_state;
|
|
|
|
val = advk_readl(pcie, CFG_REG);
|
|
ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
|
|
return ltssm_state;
|
|
}
|
|
|
|
static inline bool advk_pcie_link_up(struct advk_pcie *pcie)
|
|
{
|
|
/* check if LTSSM is in normal operation - some L* state */
|
|
u8 ltssm_state = advk_pcie_ltssm_state(pcie);
|
|
return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
|
|
}
|
|
|
|
static inline bool advk_pcie_link_active(struct advk_pcie *pcie)
|
|
{
|
|
/*
|
|
* According to PCIe Base specification 3.0, Table 4-14: Link
|
|
* Status Mapped to the LTSSM, and 4.2.6.3.6 Configuration.Idle
|
|
* is Link Up mapped to LTSSM Configuration.Idle, Recovery, L0,
|
|
* L0s, L1 and L2 states. And according to 3.2.1. Data Link
|
|
* Control and Management State Machine Rules is DL Up status
|
|
* reported in DL Active state.
|
|
*/
|
|
u8 ltssm_state = advk_pcie_ltssm_state(pcie);
|
|
return ltssm_state >= LTSSM_CONFIG_IDLE && ltssm_state < LTSSM_DISABLED;
|
|
}
|
|
|
|
static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
|
|
{
|
|
/*
|
|
* According to PCIe Base specification 3.0, Table 4-14: Link
|
|
* Status Mapped to the LTSSM is Link Training mapped to LTSSM
|
|
* Configuration and Recovery states.
|
|
*/
|
|
u8 ltssm_state = advk_pcie_ltssm_state(pcie);
|
|
return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START &&
|
|
ltssm_state < LTSSM_L0) ||
|
|
(ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 &&
|
|
ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3));
|
|
}
|
|
|
|
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
|
|
{
|
|
int retries;
|
|
|
|
/* check if the link is up or not */
|
|
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
|
|
if (advk_pcie_link_up(pcie))
|
|
return 0;
|
|
|
|
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
|
|
{
|
|
size_t retries;
|
|
|
|
for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
|
|
if (advk_pcie_link_training(pcie))
|
|
break;
|
|
udelay(RETRAIN_WAIT_USLEEP_US);
|
|
}
|
|
}
|
|
|
|
static void advk_pcie_issue_perst(struct advk_pcie *pcie)
|
|
{
|
|
if (!pcie->reset_gpio)
|
|
return;
|
|
|
|
/* 10ms delay is needed for some cards */
|
|
dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
|
|
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
|
|
usleep_range(10000, 11000);
|
|
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
|
|
}
|
|
|
|
static void advk_pcie_train_link(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
/*
|
|
* Setup PCIe rev / gen compliance based on device tree property
|
|
* 'max-link-speed' which also forces maximal link speed.
|
|
*/
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
reg &= ~PCIE_GEN_SEL_MSK;
|
|
if (pcie->link_gen == 3)
|
|
reg |= SPEED_GEN_3;
|
|
else if (pcie->link_gen == 2)
|
|
reg |= SPEED_GEN_2;
|
|
else
|
|
reg |= SPEED_GEN_1;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
|
|
|
|
/*
|
|
* Set maximal link speed value also into PCIe Link Control 2 register.
|
|
* Armada 3700 Functional Specification says that default value is based
|
|
* on SPEED_GEN but tests showed that default value is always 8.0 GT/s.
|
|
*/
|
|
reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
|
|
reg &= ~PCI_EXP_LNKCTL2_TLS;
|
|
if (pcie->link_gen == 3)
|
|
reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
|
|
else if (pcie->link_gen == 2)
|
|
reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
|
|
else
|
|
reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
|
|
advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
|
|
|
|
/* Enable link training after selecting PCIe generation */
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
reg |= LINK_TRAINING_EN;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
|
|
|
|
/*
|
|
* Reset PCIe card via PERST# signal. Some cards are not detected
|
|
* during link training when they are in some non-initial state.
|
|
*/
|
|
advk_pcie_issue_perst(pcie);
|
|
|
|
/*
|
|
* PERST# signal could have been asserted by pinctrl subsystem before
|
|
* probe() callback has been called or issued explicitly by reset gpio
|
|
* function advk_pcie_issue_perst(), making the endpoint going into
|
|
* fundamental reset. As required by PCI Express spec (PCI Express
|
|
* Base Specification, REV. 4.0 PCI Express, February 19 2014, 6.6.1
|
|
* Conventional Reset) a delay for at least 100ms after such a reset
|
|
* before sending a Configuration Request to the device is needed.
|
|
* So wait until PCIe link is up. Function advk_pcie_wait_for_link()
|
|
* waits for link at least 900ms.
|
|
*/
|
|
ret = advk_pcie_wait_for_link(pcie);
|
|
if (ret < 0)
|
|
dev_err(dev, "link never came up\n");
|
|
else
|
|
dev_info(dev, "link up\n");
|
|
}
|
|
|
|
/*
|
|
* Set PCIe address window register which could be used for memory
|
|
* mapping.
|
|
*/
|
|
static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
|
|
phys_addr_t match, phys_addr_t remap,
|
|
phys_addr_t mask, u32 actions)
|
|
{
|
|
advk_writel(pcie, OB_WIN_ENABLE |
|
|
lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
|
|
advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
|
|
advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
|
|
advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
|
|
advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
|
|
advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
|
|
advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
|
|
}
|
|
|
|
static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
|
|
{
|
|
advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
|
|
advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
|
|
}
|
|
|
|
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
|
|
{
|
|
phys_addr_t msi_addr;
|
|
u32 reg;
|
|
int i;
|
|
|
|
/*
|
|
* Configure PCIe Reference clock. Direction is from the PCIe
|
|
* controller to the endpoint card, so enable transmitting of
|
|
* Reference clock differential signal off-chip and disable
|
|
* receiving off-chip differential signal.
|
|
*/
|
|
reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
|
|
reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
|
|
reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE;
|
|
advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
|
|
|
|
/* Set to Direct mode */
|
|
reg = advk_readl(pcie, CTRL_CONFIG_REG);
|
|
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
|
|
reg |= ((PCIE_CORE_MODE_DIRECT & CTRL_MODE_MASK) << CTRL_MODE_SHIFT);
|
|
advk_writel(pcie, reg, CTRL_CONFIG_REG);
|
|
|
|
/* Set PCI global control register to RC mode */
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
reg |= (IS_RC_MSK << IS_RC_SHIFT);
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
|
|
|
|
/*
|
|
* Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
|
|
* VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
|
|
* id in high 16 bits. Updating this register changes readback value of
|
|
* read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
|
|
* for erratum 4.1: "The value of device and vendor ID is incorrect".
|
|
*/
|
|
reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
|
|
advk_writel(pcie, reg, VENDOR_ID_REG);
|
|
|
|
/*
|
|
* Change Class Code of PCI Bridge device to PCI Bridge (0x600400),
|
|
* because the default value is Mass storage controller (0x010400).
|
|
*
|
|
* Note that this Aardvark PCI Bridge does not have compliant Type 1
|
|
* Configuration Space and it even cannot be accessed via Aardvark's
|
|
* PCI config space access method. Something like config space is
|
|
* available in internal Aardvark registers starting at offset 0x0
|
|
* and is reported as Type 0. In range 0x10 - 0x34 it has totally
|
|
* different registers.
|
|
*
|
|
* Therefore driver uses emulation of PCI Bridge which emulates
|
|
* access to configuration space via internal Aardvark registers or
|
|
* emulated configuration buffer.
|
|
*/
|
|
reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG);
|
|
reg &= ~0xffffff00;
|
|
reg |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8;
|
|
advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG);
|
|
|
|
/* Disable Root Bridge I/O space, memory space and bus mastering */
|
|
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
|
|
reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
|
|
|
|
/* Set Advanced Error Capabilities and Control PF0 register */
|
|
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
|
|
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
|
|
PCIE_CORE_ERR_CAPCTL_ECRC_CHCK |
|
|
PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
|
|
advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
|
|
|
|
/* Set PCIe Device Control register */
|
|
reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
|
|
reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
|
|
reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
|
|
reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
|
|
reg &= ~PCI_EXP_DEVCTL_READRQ;
|
|
reg |= PCI_EXP_DEVCTL_PAYLOAD_512B;
|
|
reg |= PCI_EXP_DEVCTL_READRQ_512B;
|
|
advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
|
|
|
|
/* Program PCIe Control 2 to disable strict ordering */
|
|
reg = PCIE_CORE_CTRL2_RESERVED |
|
|
PCIE_CORE_CTRL2_TD_ENABLE;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
|
|
|
|
/* Set lane X1 */
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
reg &= ~LANE_CNT_MSK;
|
|
reg |= LANE_COUNT_1;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
|
|
|
|
/* Set MSI address */
|
|
msi_addr = virt_to_phys(pcie);
|
|
advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG);
|
|
advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG);
|
|
|
|
/* Enable MSI */
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
|
|
reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
|
|
|
|
/* Clear all interrupts */
|
|
advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG);
|
|
advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
|
|
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
|
|
advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
|
|
|
|
/* Disable All ISR0/1 and MSI Sources */
|
|
advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG);
|
|
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
|
|
advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
|
|
|
|
/* Unmask summary MSI interrupt */
|
|
reg = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
reg &= ~PCIE_ISR0_MSI_INT_PENDING;
|
|
advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
|
|
|
|
/* Unmask PME interrupt for processing of PME requester */
|
|
reg = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
reg &= ~PCIE_MSG_PM_PME_MASK;
|
|
advk_writel(pcie, reg, PCIE_ISR0_MASK_REG);
|
|
|
|
/* Enable summary interrupt for GIC SPI source */
|
|
reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
|
|
advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
|
|
|
|
/*
|
|
* Enable AXI address window location generation:
|
|
* When it is enabled, the default outbound window
|
|
* configurations (Default User Field: 0xD0074CFC)
|
|
* are used to transparent address translation for
|
|
* the outbound transactions. Thus, PCIe address
|
|
* windows are not required for transparent memory
|
|
* access when default outbound window configuration
|
|
* is set for memory access.
|
|
*/
|
|
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
|
|
reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
|
|
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
|
|
|
|
/*
|
|
* Set memory access in Default User Field so it
|
|
* is not required to configure PCIe address for
|
|
* transparent memory access.
|
|
*/
|
|
advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
|
|
|
|
/*
|
|
* Bypass the address window mapping for PIO:
|
|
* Since PIO access already contains all required
|
|
* info over AXI interface by PIO registers, the
|
|
* address window is not required.
|
|
*/
|
|
reg = advk_readl(pcie, PIO_CTRL);
|
|
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
|
|
advk_writel(pcie, reg, PIO_CTRL);
|
|
|
|
/*
|
|
* Configure PCIe address windows for non-memory or
|
|
* non-transparent access as by default PCIe uses
|
|
* transparent memory access.
|
|
*/
|
|
for (i = 0; i < pcie->wins_count; i++)
|
|
advk_pcie_set_ob_win(pcie, i,
|
|
pcie->wins[i].match, pcie->wins[i].remap,
|
|
pcie->wins[i].mask, pcie->wins[i].actions);
|
|
|
|
/* Disable remaining PCIe outbound windows */
|
|
for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
|
|
advk_pcie_disable_ob_win(pcie, i);
|
|
|
|
advk_pcie_train_link(pcie);
|
|
}
|
|
|
|
static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
u32 reg;
|
|
unsigned int status;
|
|
char *strcomp_status, *str_posted;
|
|
int ret;
|
|
|
|
reg = advk_readl(pcie, PIO_STAT);
|
|
status = (reg & PIO_COMPLETION_STATUS_MASK) >>
|
|
PIO_COMPLETION_STATUS_SHIFT;
|
|
|
|
/*
|
|
* According to HW spec, the PIO status check sequence as below:
|
|
* 1) even if COMPLETION_STATUS(bit9:7) indicates successful,
|
|
* it still needs to check Error Status(bit11), only when this bit
|
|
* indicates no error happen, the operation is successful.
|
|
* 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only
|
|
* means a PIO write error, and for PIO read it is successful with
|
|
* a read value of 0xFFFFFFFF.
|
|
* 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7)
|
|
* only means a PIO write error, and for PIO read it is successful
|
|
* with a read value of 0xFFFF0001.
|
|
* 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means
|
|
* error for both PIO read and PIO write operation.
|
|
* 5) other errors are indicated as 'unknown'.
|
|
*/
|
|
switch (status) {
|
|
case PIO_COMPLETION_STATUS_OK:
|
|
if (reg & PIO_ERR_STATUS) {
|
|
strcomp_status = "COMP_ERR";
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
/* Get the read result */
|
|
if (val)
|
|
*val = advk_readl(pcie, PIO_RD_DATA);
|
|
/* No error */
|
|
strcomp_status = NULL;
|
|
ret = 0;
|
|
break;
|
|
case PIO_COMPLETION_STATUS_UR:
|
|
strcomp_status = "UR";
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
case PIO_COMPLETION_STATUS_CRS:
|
|
if (allow_crs && val) {
|
|
/* PCIe r4.0, sec 2.3.2, says:
|
|
* If CRS Software Visibility is enabled:
|
|
* For a Configuration Read Request that includes both
|
|
* bytes of the Vendor ID field of a device Function's
|
|
* Configuration Space Header, the Root Complex must
|
|
* complete the Request to the host by returning a
|
|
* read-data value of 0001h for the Vendor ID field and
|
|
* all '1's for any additional bytes included in the
|
|
* request.
|
|
*
|
|
* So CRS in this case is not an error status.
|
|
*/
|
|
*val = CFG_RD_CRS_VAL;
|
|
strcomp_status = NULL;
|
|
ret = 0;
|
|
break;
|
|
}
|
|
/* PCIe r4.0, sec 2.3.2, says:
|
|
* If CRS Software Visibility is not enabled, the Root Complex
|
|
* must re-issue the Configuration Request as a new Request.
|
|
* If CRS Software Visibility is enabled: For a Configuration
|
|
* Write Request or for any other Configuration Read Request,
|
|
* the Root Complex must re-issue the Configuration Request as
|
|
* a new Request.
|
|
* A Root Complex implementation may choose to limit the number
|
|
* of Configuration Request/CRS Completion Status loops before
|
|
* determining that something is wrong with the target of the
|
|
* Request and taking appropriate action, e.g., complete the
|
|
* Request to the host as a failed transaction.
|
|
*
|
|
* So return -EAGAIN and caller (pci-aardvark.c driver) will
|
|
* re-issue request again up to the PIO_RETRY_CNT retries.
|
|
*/
|
|
strcomp_status = "CRS";
|
|
ret = -EAGAIN;
|
|
break;
|
|
case PIO_COMPLETION_STATUS_CA:
|
|
strcomp_status = "CA";
|
|
ret = -ECANCELED;
|
|
break;
|
|
default:
|
|
strcomp_status = "Unknown";
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (!strcomp_status)
|
|
return ret;
|
|
|
|
if (reg & PIO_NON_POSTED_REQ)
|
|
str_posted = "Non-posted";
|
|
else
|
|
str_posted = "Posted";
|
|
|
|
dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
|
|
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int advk_pcie_wait_pio(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
int i;
|
|
|
|
for (i = 1; i <= PIO_RETRY_CNT; i++) {
|
|
u32 start, isr;
|
|
|
|
start = advk_readl(pcie, PIO_START);
|
|
isr = advk_readl(pcie, PIO_ISR);
|
|
if (!start && isr)
|
|
return i;
|
|
udelay(PIO_RETRY_DELAY);
|
|
}
|
|
|
|
dev_err(dev, "PIO read/write transfer time out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static pci_bridge_emul_read_status_t
|
|
advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
|
|
int reg, u32 *value)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
switch (reg) {
|
|
case PCI_COMMAND:
|
|
*value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
|
|
case PCI_INTERRUPT_LINE: {
|
|
/*
|
|
* From the whole 32bit register we support reading from HW only
|
|
* two bits: PCI_BRIDGE_CTL_BUS_RESET and PCI_BRIDGE_CTL_SERR.
|
|
* Other bits are retrieved only from emulated config buffer.
|
|
*/
|
|
__le32 *cfgspace = (__le32 *)&bridge->conf;
|
|
u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
|
|
if (advk_readl(pcie, PCIE_ISR0_MASK_REG) & PCIE_ISR0_ERR_MASK)
|
|
val &= ~(PCI_BRIDGE_CTL_SERR << 16);
|
|
else
|
|
val |= PCI_BRIDGE_CTL_SERR << 16;
|
|
if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN)
|
|
val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
|
|
else
|
|
val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
|
|
*value = val;
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
}
|
|
|
|
default:
|
|
return PCI_BRIDGE_EMUL_NOT_HANDLED;
|
|
}
|
|
}
|
|
|
|
static void
|
|
advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
|
|
int reg, u32 old, u32 new, u32 mask)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
switch (reg) {
|
|
case PCI_COMMAND:
|
|
advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
|
|
break;
|
|
|
|
case PCI_INTERRUPT_LINE:
|
|
/*
|
|
* According to Figure 6-3: Pseudo Logic Diagram for Error
|
|
* Message Controls in PCIe base specification, SERR# Enable bit
|
|
* in Bridge Control register enable receiving of ERR_* messages
|
|
*/
|
|
if (mask & (PCI_BRIDGE_CTL_SERR << 16)) {
|
|
u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
if (new & (PCI_BRIDGE_CTL_SERR << 16))
|
|
val &= ~PCIE_ISR0_ERR_MASK;
|
|
else
|
|
val |= PCIE_ISR0_ERR_MASK;
|
|
advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
|
|
}
|
|
if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
|
|
u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
|
|
if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
|
|
val |= HOT_RESET_GEN;
|
|
else
|
|
val &= ~HOT_RESET_GEN;
|
|
advk_writel(pcie, val, PCIE_CORE_CTRL1_REG);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static pci_bridge_emul_read_status_t
|
|
advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
|
|
int reg, u32 *value)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
|
|
switch (reg) {
|
|
/*
|
|
* PCI_EXP_SLTCAP, PCI_EXP_SLTCTL, PCI_EXP_RTCTL and PCI_EXP_RTSTA are
|
|
* also supported, but do not need to be handled here, because their
|
|
* values are stored in emulated config space buffer, and we read them
|
|
* from there when needed.
|
|
*/
|
|
|
|
case PCI_EXP_LNKCAP: {
|
|
u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
|
|
/*
|
|
* PCI_EXP_LNKCAP_DLLLARC bit is hardwired in aardvark HW to 0.
|
|
* But support for PCI_EXP_LNKSTA_DLLLA is emulated via ltssm
|
|
* state so explicitly enable PCI_EXP_LNKCAP_DLLLARC flag.
|
|
*/
|
|
val |= PCI_EXP_LNKCAP_DLLLARC;
|
|
*value = val;
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
}
|
|
|
|
case PCI_EXP_LNKCTL: {
|
|
/* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
|
|
u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
|
|
~(PCI_EXP_LNKSTA_LT << 16);
|
|
if (advk_pcie_link_training(pcie))
|
|
val |= (PCI_EXP_LNKSTA_LT << 16);
|
|
if (advk_pcie_link_active(pcie))
|
|
val |= (PCI_EXP_LNKSTA_DLLLA << 16);
|
|
*value = val;
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
}
|
|
|
|
case PCI_EXP_DEVCAP:
|
|
case PCI_EXP_DEVCTL:
|
|
case PCI_EXP_DEVCAP2:
|
|
case PCI_EXP_DEVCTL2:
|
|
case PCI_EXP_LNKCAP2:
|
|
case PCI_EXP_LNKCTL2:
|
|
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
|
|
default:
|
|
return PCI_BRIDGE_EMUL_NOT_HANDLED;
|
|
}
|
|
|
|
}
|
|
|
|
static void
|
|
advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
|
|
int reg, u32 old, u32 new, u32 mask)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
switch (reg) {
|
|
case PCI_EXP_LNKCTL:
|
|
advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
|
|
if (new & PCI_EXP_LNKCTL_RL)
|
|
advk_pcie_wait_for_retrain(pcie);
|
|
break;
|
|
|
|
case PCI_EXP_RTCTL: {
|
|
u16 rootctl = le16_to_cpu(bridge->pcie_conf.rootctl);
|
|
/* Only emulation of PMEIE and CRSSVE bits is provided */
|
|
rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_CRSSVE;
|
|
bridge->pcie_conf.rootctl = cpu_to_le16(rootctl);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* PCI_EXP_RTSTA is also supported, but does not need to be handled
|
|
* here, because its value is stored in emulated config space buffer,
|
|
* and we write it there when needed.
|
|
*/
|
|
|
|
case PCI_EXP_DEVCTL:
|
|
case PCI_EXP_DEVCTL2:
|
|
case PCI_EXP_LNKCTL2:
|
|
advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static pci_bridge_emul_read_status_t
|
|
advk_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge,
|
|
int reg, u32 *value)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
switch (reg) {
|
|
case 0:
|
|
*value = advk_readl(pcie, PCIE_CORE_PCIERR_CAP + reg);
|
|
|
|
/*
|
|
* PCI_EXT_CAP_NEXT bits are set to offset 0x150, but Armada
|
|
* 3700 Functional Specification does not document registers
|
|
* at those addresses.
|
|
*
|
|
* Thus we clear PCI_EXT_CAP_NEXT bits to make Advanced Error
|
|
* Reporting Capability header the last Extended Capability.
|
|
* If we obtain documentation for those registers in the
|
|
* future, this can be changed.
|
|
*/
|
|
*value &= 0x000fffff;
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
|
|
case PCI_ERR_UNCOR_STATUS:
|
|
case PCI_ERR_UNCOR_MASK:
|
|
case PCI_ERR_UNCOR_SEVER:
|
|
case PCI_ERR_COR_STATUS:
|
|
case PCI_ERR_COR_MASK:
|
|
case PCI_ERR_CAP:
|
|
case PCI_ERR_HEADER_LOG + 0:
|
|
case PCI_ERR_HEADER_LOG + 4:
|
|
case PCI_ERR_HEADER_LOG + 8:
|
|
case PCI_ERR_HEADER_LOG + 12:
|
|
case PCI_ERR_ROOT_COMMAND:
|
|
case PCI_ERR_ROOT_STATUS:
|
|
case PCI_ERR_ROOT_ERR_SRC:
|
|
*value = advk_readl(pcie, PCIE_CORE_PCIERR_CAP + reg);
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
|
|
default:
|
|
return PCI_BRIDGE_EMUL_NOT_HANDLED;
|
|
}
|
|
}
|
|
|
|
static void
|
|
advk_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge,
|
|
int reg, u32 old, u32 new, u32 mask)
|
|
{
|
|
struct advk_pcie *pcie = bridge->data;
|
|
|
|
switch (reg) {
|
|
/* These are W1C registers, so clear other bits */
|
|
case PCI_ERR_UNCOR_STATUS:
|
|
case PCI_ERR_COR_STATUS:
|
|
case PCI_ERR_ROOT_STATUS:
|
|
new &= mask;
|
|
fallthrough;
|
|
|
|
case PCI_ERR_UNCOR_MASK:
|
|
case PCI_ERR_UNCOR_SEVER:
|
|
case PCI_ERR_COR_MASK:
|
|
case PCI_ERR_CAP:
|
|
case PCI_ERR_HEADER_LOG + 0:
|
|
case PCI_ERR_HEADER_LOG + 4:
|
|
case PCI_ERR_HEADER_LOG + 8:
|
|
case PCI_ERR_HEADER_LOG + 12:
|
|
case PCI_ERR_ROOT_COMMAND:
|
|
case PCI_ERR_ROOT_ERR_SRC:
|
|
advk_writel(pcie, new, PCIE_CORE_PCIERR_CAP + reg);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
|
|
.read_base = advk_pci_bridge_emul_base_conf_read,
|
|
.write_base = advk_pci_bridge_emul_base_conf_write,
|
|
.read_pcie = advk_pci_bridge_emul_pcie_conf_read,
|
|
.write_pcie = advk_pci_bridge_emul_pcie_conf_write,
|
|
.read_ext = advk_pci_bridge_emul_ext_conf_read,
|
|
.write_ext = advk_pci_bridge_emul_ext_conf_write,
|
|
};
|
|
|
|
/*
|
|
* Initialize the configuration space of the PCI-to-PCI bridge
|
|
* associated with the given PCIe interface.
|
|
*/
|
|
static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
|
|
{
|
|
struct pci_bridge_emul *bridge = &pcie->bridge;
|
|
|
|
bridge->conf.vendor =
|
|
cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff);
|
|
bridge->conf.device =
|
|
cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) >> 16);
|
|
bridge->conf.class_revision =
|
|
cpu_to_le32(advk_readl(pcie, PCIE_CORE_DEV_REV_REG) & 0xff);
|
|
|
|
/* Support 32 bits I/O addressing */
|
|
bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
|
|
bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
|
|
|
|
/* Support 64 bits memory pref */
|
|
bridge->conf.pref_mem_base = cpu_to_le16(PCI_PREF_RANGE_TYPE_64);
|
|
bridge->conf.pref_mem_limit = cpu_to_le16(PCI_PREF_RANGE_TYPE_64);
|
|
|
|
/* Support interrupt A for MSI feature */
|
|
bridge->conf.intpin = PCI_INTERRUPT_INTA;
|
|
|
|
/*
|
|
* Aardvark HW provides PCIe Capability structure in version 2 and
|
|
* indicate slot support, which is emulated.
|
|
*/
|
|
bridge->pcie_conf.cap = cpu_to_le16(2 | PCI_EXP_FLAGS_SLOT);
|
|
|
|
/*
|
|
* Set Presence Detect State bit permanently since there is no support
|
|
* for unplugging the card nor detecting whether it is plugged. (If a
|
|
* platform exists in the future that supports it, via a GPIO for
|
|
* example, it should be implemented via this bit.)
|
|
*
|
|
* Set physical slot number to 1 since there is only one port and zero
|
|
* value is reserved for ports within the same silicon as Root Port
|
|
* which is not our case.
|
|
*/
|
|
bridge->pcie_conf.slotcap = cpu_to_le32(FIELD_PREP(PCI_EXP_SLTCAP_PSN,
|
|
1));
|
|
bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
|
|
|
|
/* Indicates supports for Completion Retry Status */
|
|
bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
|
|
|
|
bridge->has_pcie = true;
|
|
bridge->data = pcie;
|
|
bridge->ops = &advk_pci_bridge_emul_ops;
|
|
|
|
return pci_bridge_emul_init(bridge, 0);
|
|
}
|
|
|
|
static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
|
|
int devfn)
|
|
{
|
|
if (pci_is_root_bus(bus) && PCI_SLOT(devfn) != 0)
|
|
return false;
|
|
|
|
/*
|
|
* If the link goes down after we check for link-up, we have a problem:
|
|
* if a PIO request is executed while link-down, the whole controller
|
|
* gets stuck in a non-functional state, and even after link comes up
|
|
* again, PIO requests won't work anymore, and a reset of the whole PCIe
|
|
* controller is needed. Therefore we need to prevent sending PIO
|
|
* requests while the link is down.
|
|
*/
|
|
if (!pci_is_root_bus(bus) && !advk_pcie_link_up(pcie))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool advk_pcie_pio_is_running(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
|
|
/*
|
|
* Trying to start a new PIO transfer when previous has not completed
|
|
* cause External Abort on CPU which results in kernel panic:
|
|
*
|
|
* SError Interrupt on CPU0, code 0xbf000002 -- SError
|
|
* Kernel panic - not syncing: Asynchronous SError Interrupt
|
|
*
|
|
* Functions advk_pcie_rd_conf() and advk_pcie_wr_conf() are protected
|
|
* by raw_spin_lock_irqsave() at pci_lock_config() level to prevent
|
|
* concurrent calls at the same time. But because PIO transfer may take
|
|
* about 1.5s when link is down or card is disconnected, it means that
|
|
* advk_pcie_wait_pio() does not always have to wait for completion.
|
|
*
|
|
* Some versions of ARM Trusted Firmware handles this External Abort at
|
|
* EL3 level and mask it to prevent kernel panic. Relevant TF-A commit:
|
|
* https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
|
|
*/
|
|
if (advk_readl(pcie, PIO_START)) {
|
|
dev_err(dev, "Previous PIO read/write transfer is still running\n");
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct advk_pcie *pcie = bus->sysdata;
|
|
int retry_count;
|
|
bool allow_crs;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
if (!advk_pcie_valid_device(pcie, bus, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (pci_is_root_bus(bus))
|
|
return pci_bridge_emul_conf_read(&pcie->bridge, where,
|
|
size, val);
|
|
|
|
/*
|
|
* Completion Retry Status is possible to return only when reading all
|
|
* 4 bytes from PCI_VENDOR_ID and PCI_DEVICE_ID registers at once and
|
|
* CRSSVE flag on Root Bridge is enabled.
|
|
*/
|
|
allow_crs = (where == PCI_VENDOR_ID) && (size == 4) &&
|
|
(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
|
|
PCI_EXP_RTCTL_CRSSVE);
|
|
|
|
if (advk_pcie_pio_is_running(pcie))
|
|
goto try_crs;
|
|
|
|
/* Program the control register */
|
|
reg = advk_readl(pcie, PIO_CTRL);
|
|
reg &= ~PIO_CTRL_TYPE_MASK;
|
|
if (pci_is_root_bus(bus->parent))
|
|
reg |= PCIE_CONFIG_RD_TYPE0;
|
|
else
|
|
reg |= PCIE_CONFIG_RD_TYPE1;
|
|
advk_writel(pcie, reg, PIO_CTRL);
|
|
|
|
/* Program the address registers */
|
|
reg = ALIGN_DOWN(PCIE_ECAM_OFFSET(bus->number, devfn, where), 4);
|
|
advk_writel(pcie, reg, PIO_ADDR_LS);
|
|
advk_writel(pcie, 0, PIO_ADDR_MS);
|
|
|
|
/* Program the data strobe */
|
|
advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
|
|
|
|
retry_count = 0;
|
|
do {
|
|
/* Clear PIO DONE ISR and start the transfer */
|
|
advk_writel(pcie, 1, PIO_ISR);
|
|
advk_writel(pcie, 1, PIO_START);
|
|
|
|
ret = advk_pcie_wait_pio(pcie);
|
|
if (ret < 0)
|
|
goto try_crs;
|
|
|
|
retry_count += ret;
|
|
|
|
/* Check PIO status and get the read result */
|
|
ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
|
|
} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
|
|
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
if (size == 1)
|
|
*val = (*val >> (8 * (where & 3))) & 0xff;
|
|
else if (size == 2)
|
|
*val = (*val >> (8 * (where & 3))) & 0xffff;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
try_crs:
|
|
/*
|
|
* If it is possible, return Completion Retry Status so that caller
|
|
* tries to issue the request again instead of failing.
|
|
*/
|
|
if (allow_crs) {
|
|
*val = CFG_RD_CRS_VAL;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
fail:
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_SET_FAILED;
|
|
}
|
|
|
|
static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct advk_pcie *pcie = bus->sysdata;
|
|
u32 reg;
|
|
u32 data_strobe = 0x0;
|
|
int retry_count;
|
|
int offset;
|
|
int ret;
|
|
|
|
if (!advk_pcie_valid_device(pcie, bus, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (pci_is_root_bus(bus))
|
|
return pci_bridge_emul_conf_write(&pcie->bridge, where,
|
|
size, val);
|
|
|
|
if (where % size)
|
|
return PCIBIOS_SET_FAILED;
|
|
|
|
if (advk_pcie_pio_is_running(pcie))
|
|
return PCIBIOS_SET_FAILED;
|
|
|
|
/* Program the control register */
|
|
reg = advk_readl(pcie, PIO_CTRL);
|
|
reg &= ~PIO_CTRL_TYPE_MASK;
|
|
if (pci_is_root_bus(bus->parent))
|
|
reg |= PCIE_CONFIG_WR_TYPE0;
|
|
else
|
|
reg |= PCIE_CONFIG_WR_TYPE1;
|
|
advk_writel(pcie, reg, PIO_CTRL);
|
|
|
|
/* Program the address registers */
|
|
reg = ALIGN_DOWN(PCIE_ECAM_OFFSET(bus->number, devfn, where), 4);
|
|
advk_writel(pcie, reg, PIO_ADDR_LS);
|
|
advk_writel(pcie, 0, PIO_ADDR_MS);
|
|
|
|
/* Calculate the write strobe */
|
|
offset = where & 0x3;
|
|
reg = val << (8 * offset);
|
|
data_strobe = GENMASK(size - 1, 0) << offset;
|
|
|
|
/* Program the data register */
|
|
advk_writel(pcie, reg, PIO_WR_DATA);
|
|
|
|
/* Program the data strobe */
|
|
advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
|
|
|
|
retry_count = 0;
|
|
do {
|
|
/* Clear PIO DONE ISR and start the transfer */
|
|
advk_writel(pcie, 1, PIO_ISR);
|
|
advk_writel(pcie, 1, PIO_START);
|
|
|
|
ret = advk_pcie_wait_pio(pcie);
|
|
if (ret < 0)
|
|
return PCIBIOS_SET_FAILED;
|
|
|
|
retry_count += ret;
|
|
|
|
ret = advk_pcie_check_pio_status(pcie, false, NULL);
|
|
} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
|
|
|
|
return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops advk_pcie_ops = {
|
|
.read = advk_pcie_rd_conf,
|
|
.write = advk_pcie_wr_conf,
|
|
};
|
|
|
|
static void advk_msi_irq_compose_msi_msg(struct irq_data *data,
|
|
struct msi_msg *msg)
|
|
{
|
|
struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
|
|
phys_addr_t msi_addr = virt_to_phys(pcie);
|
|
|
|
msg->address_lo = lower_32_bits(msi_addr);
|
|
msg->address_hi = upper_32_bits(msi_addr);
|
|
msg->data = data->hwirq;
|
|
}
|
|
|
|
static int advk_msi_set_affinity(struct irq_data *irq_data,
|
|
const struct cpumask *mask, bool force)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void advk_msi_irq_mask(struct irq_data *d)
|
|
{
|
|
struct advk_pcie *pcie = d->domain->host_data;
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags);
|
|
mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
|
|
mask |= BIT(hwirq);
|
|
advk_writel(pcie, mask, PCIE_MSI_MASK_REG);
|
|
raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags);
|
|
}
|
|
|
|
static void advk_msi_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct advk_pcie *pcie = d->domain->host_data;
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
raw_spin_lock_irqsave(&pcie->msi_irq_lock, flags);
|
|
mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
|
|
mask &= ~BIT(hwirq);
|
|
advk_writel(pcie, mask, PCIE_MSI_MASK_REG);
|
|
raw_spin_unlock_irqrestore(&pcie->msi_irq_lock, flags);
|
|
}
|
|
|
|
static void advk_msi_top_irq_mask(struct irq_data *d)
|
|
{
|
|
pci_msi_mask_irq(d);
|
|
irq_chip_mask_parent(d);
|
|
}
|
|
|
|
static void advk_msi_top_irq_unmask(struct irq_data *d)
|
|
{
|
|
pci_msi_unmask_irq(d);
|
|
irq_chip_unmask_parent(d);
|
|
}
|
|
|
|
static struct irq_chip advk_msi_bottom_irq_chip = {
|
|
.name = "MSI",
|
|
.irq_compose_msi_msg = advk_msi_irq_compose_msi_msg,
|
|
.irq_set_affinity = advk_msi_set_affinity,
|
|
.irq_mask = advk_msi_irq_mask,
|
|
.irq_unmask = advk_msi_irq_unmask,
|
|
};
|
|
|
|
static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
|
|
unsigned int virq,
|
|
unsigned int nr_irqs, void *args)
|
|
{
|
|
struct advk_pcie *pcie = domain->host_data;
|
|
int hwirq, i;
|
|
|
|
mutex_lock(&pcie->msi_used_lock);
|
|
hwirq = bitmap_find_free_region(pcie->msi_used, MSI_IRQ_NUM,
|
|
order_base_2(nr_irqs));
|
|
mutex_unlock(&pcie->msi_used_lock);
|
|
if (hwirq < 0)
|
|
return -ENOSPC;
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_set_info(domain, virq + i, hwirq + i,
|
|
&advk_msi_bottom_irq_chip,
|
|
domain->host_data, handle_simple_irq,
|
|
NULL, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void advk_msi_irq_domain_free(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
|
|
struct advk_pcie *pcie = domain->host_data;
|
|
|
|
mutex_lock(&pcie->msi_used_lock);
|
|
bitmap_release_region(pcie->msi_used, d->hwirq, order_base_2(nr_irqs));
|
|
mutex_unlock(&pcie->msi_used_lock);
|
|
}
|
|
|
|
static const struct irq_domain_ops advk_msi_domain_ops = {
|
|
.alloc = advk_msi_irq_domain_alloc,
|
|
.free = advk_msi_irq_domain_free,
|
|
};
|
|
|
|
static void advk_pcie_irq_mask(struct irq_data *d)
|
|
{
|
|
struct advk_pcie *pcie = d->domain->host_data;
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
raw_spin_lock_irqsave(&pcie->irq_lock, flags);
|
|
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
|
|
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
|
|
raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
|
|
}
|
|
|
|
static void advk_pcie_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct advk_pcie *pcie = d->domain->host_data;
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
raw_spin_lock_irqsave(&pcie->irq_lock, flags);
|
|
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
|
|
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
|
|
raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
|
|
}
|
|
|
|
static int advk_pcie_irq_map(struct irq_domain *h,
|
|
unsigned int virq, irq_hw_number_t hwirq)
|
|
{
|
|
struct advk_pcie *pcie = h->host_data;
|
|
|
|
irq_set_status_flags(virq, IRQ_LEVEL);
|
|
irq_set_chip_and_handler(virq, &pcie->irq_chip,
|
|
handle_level_irq);
|
|
irq_set_chip_data(virq, pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops advk_pcie_irq_domain_ops = {
|
|
.map = advk_pcie_irq_map,
|
|
.xlate = irq_domain_xlate_onecell,
|
|
};
|
|
|
|
static struct irq_chip advk_msi_irq_chip = {
|
|
.name = "advk-MSI",
|
|
.irq_mask = advk_msi_top_irq_mask,
|
|
.irq_unmask = advk_msi_top_irq_unmask,
|
|
};
|
|
|
|
static struct msi_domain_info advk_msi_domain_info = {
|
|
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
|
|
MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
|
|
.chip = &advk_msi_irq_chip,
|
|
};
|
|
|
|
static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
|
|
raw_spin_lock_init(&pcie->msi_irq_lock);
|
|
mutex_init(&pcie->msi_used_lock);
|
|
|
|
pcie->msi_inner_domain =
|
|
irq_domain_add_linear(NULL, MSI_IRQ_NUM,
|
|
&advk_msi_domain_ops, pcie);
|
|
if (!pcie->msi_inner_domain)
|
|
return -ENOMEM;
|
|
|
|
pcie->msi_domain =
|
|
pci_msi_create_irq_domain(dev_fwnode(dev),
|
|
&advk_msi_domain_info,
|
|
pcie->msi_inner_domain);
|
|
if (!pcie->msi_domain) {
|
|
irq_domain_remove(pcie->msi_inner_domain);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void advk_pcie_remove_msi_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
irq_domain_remove(pcie->msi_domain);
|
|
irq_domain_remove(pcie->msi_inner_domain);
|
|
}
|
|
|
|
static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct device_node *pcie_intc_node;
|
|
struct irq_chip *irq_chip;
|
|
int ret = 0;
|
|
|
|
raw_spin_lock_init(&pcie->irq_lock);
|
|
|
|
pcie_intc_node = of_get_next_child(node, NULL);
|
|
if (!pcie_intc_node) {
|
|
dev_err(dev, "No PCIe Intc node found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
irq_chip = &pcie->irq_chip;
|
|
|
|
irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
|
|
dev_name(dev));
|
|
if (!irq_chip->name) {
|
|
ret = -ENOMEM;
|
|
goto out_put_node;
|
|
}
|
|
|
|
irq_chip->irq_mask = advk_pcie_irq_mask;
|
|
irq_chip->irq_unmask = advk_pcie_irq_unmask;
|
|
|
|
pcie->irq_domain =
|
|
irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
|
|
&advk_pcie_irq_domain_ops, pcie);
|
|
if (!pcie->irq_domain) {
|
|
dev_err(dev, "Failed to get a INTx IRQ domain\n");
|
|
ret = -ENOMEM;
|
|
goto out_put_node;
|
|
}
|
|
|
|
out_put_node:
|
|
of_node_put(pcie_intc_node);
|
|
return ret;
|
|
}
|
|
|
|
static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
irq_domain_remove(pcie->irq_domain);
|
|
}
|
|
|
|
static struct irq_chip advk_rp_irq_chip = {
|
|
.name = "advk-RP",
|
|
};
|
|
|
|
static int advk_pcie_rp_irq_map(struct irq_domain *h,
|
|
unsigned int virq, irq_hw_number_t hwirq)
|
|
{
|
|
struct advk_pcie *pcie = h->host_data;
|
|
|
|
irq_set_chip_and_handler(virq, &advk_rp_irq_chip, handle_simple_irq);
|
|
irq_set_chip_data(virq, pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops advk_pcie_rp_irq_domain_ops = {
|
|
.map = advk_pcie_rp_irq_map,
|
|
.xlate = irq_domain_xlate_onecell,
|
|
};
|
|
|
|
static int advk_pcie_init_rp_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
pcie->rp_irq_domain = irq_domain_add_linear(NULL, 1,
|
|
&advk_pcie_rp_irq_domain_ops,
|
|
pcie);
|
|
if (!pcie->rp_irq_domain) {
|
|
dev_err(&pcie->pdev->dev, "Failed to add Root Port IRQ domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void advk_pcie_remove_rp_irq_domain(struct advk_pcie *pcie)
|
|
{
|
|
irq_domain_remove(pcie->rp_irq_domain);
|
|
}
|
|
|
|
static void advk_pcie_handle_pme(struct advk_pcie *pcie)
|
|
{
|
|
u32 requester = advk_readl(pcie, PCIE_MSG_LOG_REG) >> 16;
|
|
|
|
advk_writel(pcie, PCIE_MSG_PM_PME_MASK, PCIE_ISR0_REG);
|
|
|
|
/*
|
|
* PCIE_MSG_LOG_REG contains the last inbound message, so store
|
|
* the requester ID only when PME was not asserted yet.
|
|
* Also do not trigger PME interrupt when PME is still asserted.
|
|
*/
|
|
if (!(le32_to_cpu(pcie->bridge.pcie_conf.rootsta) & PCI_EXP_RTSTA_PME)) {
|
|
pcie->bridge.pcie_conf.rootsta = cpu_to_le32(requester | PCI_EXP_RTSTA_PME);
|
|
|
|
/*
|
|
* Trigger PME interrupt only if PMEIE bit in Root Control is set.
|
|
* Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ, so use PCIe interrupt 0.
|
|
*/
|
|
if (!(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & PCI_EXP_RTCTL_PMEIE))
|
|
return;
|
|
|
|
if (generic_handle_domain_irq(pcie->rp_irq_domain, 0) == -EINVAL)
|
|
dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
|
|
}
|
|
}
|
|
|
|
static void advk_pcie_handle_msi(struct advk_pcie *pcie)
|
|
{
|
|
u32 msi_val, msi_mask, msi_status, msi_idx;
|
|
|
|
msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
|
|
msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
|
|
msi_status = msi_val & ((~msi_mask) & PCIE_MSI_ALL_MASK);
|
|
|
|
for (msi_idx = 0; msi_idx < MSI_IRQ_NUM; msi_idx++) {
|
|
if (!(BIT(msi_idx) & msi_status))
|
|
continue;
|
|
|
|
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
|
|
if (generic_handle_domain_irq(pcie->msi_inner_domain, msi_idx) == -EINVAL)
|
|
dev_err_ratelimited(&pcie->pdev->dev, "unexpected MSI 0x%02x\n", msi_idx);
|
|
}
|
|
|
|
advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
|
|
PCIE_ISR0_REG);
|
|
}
|
|
|
|
static void advk_pcie_handle_int(struct advk_pcie *pcie)
|
|
{
|
|
u32 isr0_val, isr0_mask, isr0_status;
|
|
u32 isr1_val, isr1_mask, isr1_status;
|
|
int i;
|
|
|
|
isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
|
|
isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
isr0_status = isr0_val & ((~isr0_mask) & PCIE_ISR0_ALL_MASK);
|
|
|
|
isr1_val = advk_readl(pcie, PCIE_ISR1_REG);
|
|
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
|
|
|
|
/* Process PME interrupt as the first one to do not miss PME requester id */
|
|
if (isr0_status & PCIE_MSG_PM_PME_MASK)
|
|
advk_pcie_handle_pme(pcie);
|
|
|
|
/* Process ERR interrupt */
|
|
if (isr0_status & PCIE_ISR0_ERR_MASK) {
|
|
advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
|
|
|
|
/*
|
|
* Aardvark HW returns zero for PCI_ERR_ROOT_AER_IRQ, so use
|
|
* PCIe interrupt 0
|
|
*/
|
|
if (generic_handle_domain_irq(pcie->rp_irq_domain, 0) == -EINVAL)
|
|
dev_err_ratelimited(&pcie->pdev->dev, "unhandled ERR IRQ\n");
|
|
}
|
|
|
|
/* Process MSI interrupts */
|
|
if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
|
|
advk_pcie_handle_msi(pcie);
|
|
|
|
/* Process legacy interrupts */
|
|
for (i = 0; i < PCI_NUM_INTX; i++) {
|
|
if (!(isr1_status & PCIE_ISR1_INTX_ASSERT(i)))
|
|
continue;
|
|
|
|
advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
|
|
PCIE_ISR1_REG);
|
|
|
|
if (generic_handle_domain_irq(pcie->irq_domain, i) == -EINVAL)
|
|
dev_err_ratelimited(&pcie->pdev->dev, "unexpected INT%c IRQ\n",
|
|
(char)i + 'A');
|
|
}
|
|
}
|
|
|
|
static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
|
|
{
|
|
struct advk_pcie *pcie = arg;
|
|
u32 status;
|
|
|
|
status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
|
|
if (!(status & PCIE_IRQ_CORE_INT))
|
|
return IRQ_NONE;
|
|
|
|
advk_pcie_handle_int(pcie);
|
|
|
|
/* Clear interrupt */
|
|
advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int advk_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
struct advk_pcie *pcie = dev->bus->sysdata;
|
|
|
|
/*
|
|
* Emulated root bridge has its own emulated irq chip and irq domain.
|
|
* Argument pin is the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) and
|
|
* hwirq for irq_create_mapping() is indexed from zero.
|
|
*/
|
|
if (pci_is_root_bus(dev->bus))
|
|
return irq_create_mapping(pcie->rp_irq_domain, pin - 1);
|
|
else
|
|
return of_irq_parse_and_map_pci(dev, slot, pin);
|
|
}
|
|
|
|
static void advk_pcie_disable_phy(struct advk_pcie *pcie)
|
|
{
|
|
phy_power_off(pcie->phy);
|
|
phy_exit(pcie->phy);
|
|
}
|
|
|
|
static int advk_pcie_enable_phy(struct advk_pcie *pcie)
|
|
{
|
|
int ret;
|
|
|
|
if (!pcie->phy)
|
|
return 0;
|
|
|
|
ret = phy_init(pcie->phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
|
|
if (ret) {
|
|
phy_exit(pcie->phy);
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_power_on(pcie->phy);
|
|
if (ret) {
|
|
phy_exit(pcie->phy);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int advk_pcie_setup_phy(struct advk_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
int ret = 0;
|
|
|
|
pcie->phy = devm_of_phy_get(dev, node, NULL);
|
|
if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
|
|
return PTR_ERR(pcie->phy);
|
|
|
|
/* Old bindings miss the PHY handle */
|
|
if (IS_ERR(pcie->phy)) {
|
|
dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy));
|
|
pcie->phy = NULL;
|
|
return 0;
|
|
}
|
|
|
|
ret = advk_pcie_enable_phy(pcie);
|
|
if (ret)
|
|
dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int advk_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct advk_pcie *pcie;
|
|
struct pci_host_bridge *bridge;
|
|
struct resource_entry *entry;
|
|
int ret, irq;
|
|
|
|
bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
pcie = pci_host_bridge_priv(bridge);
|
|
pcie->pdev = pdev;
|
|
platform_set_drvdata(pdev, pcie);
|
|
|
|
resource_list_for_each_entry(entry, &bridge->windows) {
|
|
resource_size_t start = entry->res->start;
|
|
resource_size_t size = resource_size(entry->res);
|
|
unsigned long type = resource_type(entry->res);
|
|
u64 win_size;
|
|
|
|
/*
|
|
* Aardvark hardware allows to configure also PCIe window
|
|
* for config type 0 and type 1 mapping, but driver uses
|
|
* only PIO for issuing configuration transfers which does
|
|
* not use PCIe window configuration.
|
|
*/
|
|
if (type != IORESOURCE_MEM && type != IORESOURCE_IO)
|
|
continue;
|
|
|
|
/*
|
|
* Skip transparent memory resources. Default outbound access
|
|
* configuration is set to transparent memory access so it
|
|
* does not need window configuration.
|
|
*/
|
|
if (type == IORESOURCE_MEM && entry->offset == 0)
|
|
continue;
|
|
|
|
/*
|
|
* The n-th PCIe window is configured by tuple (match, remap, mask)
|
|
* and an access to address A uses this window if A matches the
|
|
* match with given mask.
|
|
* So every PCIe window size must be a power of two and every start
|
|
* address must be aligned to window size. Minimal size is 64 KiB
|
|
* because lower 16 bits of mask must be zero. Remapped address
|
|
* may have set only bits from the mask.
|
|
*/
|
|
while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
|
|
/* Calculate the largest aligned window size */
|
|
win_size = (1ULL << (fls64(size)-1)) |
|
|
(start ? (1ULL << __ffs64(start)) : 0);
|
|
win_size = 1ULL << __ffs64(win_size);
|
|
if (win_size < 0x10000)
|
|
break;
|
|
|
|
dev_dbg(dev,
|
|
"Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
|
|
pcie->wins_count, (unsigned long long)start,
|
|
(unsigned long long)start + win_size, type);
|
|
|
|
if (type == IORESOURCE_IO) {
|
|
pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
|
|
pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
|
|
} else {
|
|
pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
|
|
pcie->wins[pcie->wins_count].match = start;
|
|
}
|
|
pcie->wins[pcie->wins_count].remap = start - entry->offset;
|
|
pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
|
|
|
|
if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
|
|
break;
|
|
|
|
start += win_size;
|
|
size -= win_size;
|
|
pcie->wins_count++;
|
|
}
|
|
|
|
if (size > 0) {
|
|
dev_err(&pcie->pdev->dev,
|
|
"Invalid PCIe region [0x%llx-0x%llx]\n",
|
|
(unsigned long long)entry->res->start,
|
|
(unsigned long long)entry->res->end + 1);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
pcie->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pcie->base))
|
|
return PTR_ERR(pcie->base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_irq(dev, irq, advk_pcie_irq_handler,
|
|
IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie",
|
|
pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to register interrupt\n");
|
|
return ret;
|
|
}
|
|
|
|
pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
|
|
"reset-gpios", 0,
|
|
GPIOD_OUT_LOW,
|
|
"pcie1-reset");
|
|
ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
|
|
if (ret) {
|
|
if (ret == -ENOENT) {
|
|
pcie->reset_gpio = NULL;
|
|
} else {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to get reset-gpio: %i\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = of_pci_get_max_link_speed(dev->of_node);
|
|
if (ret <= 0 || ret > 3)
|
|
pcie->link_gen = 3;
|
|
else
|
|
pcie->link_gen = ret;
|
|
|
|
ret = advk_pcie_setup_phy(pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
advk_pcie_setup_hw(pcie);
|
|
|
|
ret = advk_sw_pci_bridge_init(pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to register emulated root PCI bridge\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = advk_pcie_init_irq_domain(pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize irq\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = advk_pcie_init_msi_irq_domain(pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize irq\n");
|
|
advk_pcie_remove_irq_domain(pcie);
|
|
return ret;
|
|
}
|
|
|
|
ret = advk_pcie_init_rp_irq_domain(pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize irq\n");
|
|
advk_pcie_remove_msi_irq_domain(pcie);
|
|
advk_pcie_remove_irq_domain(pcie);
|
|
return ret;
|
|
}
|
|
|
|
bridge->sysdata = pcie;
|
|
bridge->ops = &advk_pcie_ops;
|
|
bridge->map_irq = advk_pcie_map_irq;
|
|
|
|
ret = pci_host_probe(bridge);
|
|
if (ret < 0) {
|
|
advk_pcie_remove_rp_irq_domain(pcie);
|
|
advk_pcie_remove_msi_irq_domain(pcie);
|
|
advk_pcie_remove_irq_domain(pcie);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int advk_pcie_remove(struct platform_device *pdev)
|
|
{
|
|
struct advk_pcie *pcie = platform_get_drvdata(pdev);
|
|
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
|
|
u32 val;
|
|
int i;
|
|
|
|
/* Remove PCI bus with all devices */
|
|
pci_lock_rescan_remove();
|
|
pci_stop_root_bus(bridge->bus);
|
|
pci_remove_root_bus(bridge->bus);
|
|
pci_unlock_rescan_remove();
|
|
|
|
/* Disable Root Bridge I/O space, memory space and bus mastering */
|
|
val = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
|
|
val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
advk_writel(pcie, val, PCIE_CORE_CMD_STATUS_REG);
|
|
|
|
/* Disable MSI */
|
|
val = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
|
|
val &= ~PCIE_CORE_CTRL2_MSI_ENABLE;
|
|
advk_writel(pcie, val, PCIE_CORE_CTRL2_REG);
|
|
|
|
/* Clear MSI address */
|
|
advk_writel(pcie, 0, PCIE_MSI_ADDR_LOW_REG);
|
|
advk_writel(pcie, 0, PCIE_MSI_ADDR_HIGH_REG);
|
|
|
|
/* Mask all interrupts */
|
|
advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_MASK_REG);
|
|
advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_MASK_REG);
|
|
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
|
|
advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_MASK_REG);
|
|
|
|
/* Clear all interrupts */
|
|
advk_writel(pcie, PCIE_MSI_ALL_MASK, PCIE_MSI_STATUS_REG);
|
|
advk_writel(pcie, PCIE_ISR0_ALL_MASK, PCIE_ISR0_REG);
|
|
advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
|
|
advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
|
|
|
|
/* Remove IRQ domains */
|
|
advk_pcie_remove_rp_irq_domain(pcie);
|
|
advk_pcie_remove_msi_irq_domain(pcie);
|
|
advk_pcie_remove_irq_domain(pcie);
|
|
|
|
/* Free config space for emulated root bridge */
|
|
pci_bridge_emul_cleanup(&pcie->bridge);
|
|
|
|
/* Assert PERST# signal which prepares PCIe card for power down */
|
|
if (pcie->reset_gpio)
|
|
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
|
|
|
|
/* Disable link training */
|
|
val = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
val &= ~LINK_TRAINING_EN;
|
|
advk_writel(pcie, val, PCIE_CORE_CTRL0_REG);
|
|
|
|
/* Disable outbound address windows mapping */
|
|
for (i = 0; i < OB_WIN_COUNT; i++)
|
|
advk_pcie_disable_ob_win(pcie, i);
|
|
|
|
/* Disable phy */
|
|
advk_pcie_disable_phy(pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id advk_pcie_of_match_table[] = {
|
|
{ .compatible = "marvell,armada-3700-pcie", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, advk_pcie_of_match_table);
|
|
|
|
static struct platform_driver advk_pcie_driver = {
|
|
.driver = {
|
|
.name = "advk-pcie",
|
|
.of_match_table = advk_pcie_of_match_table,
|
|
},
|
|
.probe = advk_pcie_probe,
|
|
.remove = advk_pcie_remove,
|
|
};
|
|
module_platform_driver(advk_pcie_driver);
|
|
|
|
MODULE_DESCRIPTION("Aardvark PCIe controller");
|
|
MODULE_LICENSE("GPL v2");
|