linux/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
Marco Franchi 404c0c9314 ARM: dts: imx6qdl: Fix memory node duplication
Boards based on imx6qdl have duplicate memory nodes:
- One coming from the board device tree file: memory@
- One coming from the imx6qdl.dtsi file.

Fix the duplication by removing the memory node from
the imx6qdl.dtsi file and by adding 'device_type = "memory";'
in the board Device Tree.

Converted using the following command:
perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"``

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10 10:03:07 +08:00

88 lines
1.7 KiB
Plaintext

/*
* support fot the imx6 based aristainetos board
*
* Copyright (C) 2014 Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-aristainetos.dtsi"
/ {
model = "aristainetos i.MX6 Dual Lite Board 4";
compatible = "fsl,imx6dl";
backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
status = "okay";
};
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x40000000>;
};
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
status = "okay";
display-timings {
480x800p60 {
native-mode;
clock-frequency = <30000000>;
hactive = <480>;
vactive = <800>;
hfront-porch = <59>;
hback-porch = <10>;
hsync-len = <10>;
vback-porch = <15>;
vfront-porch = <15>;
vsync-len = <15>;
hsync-active = <1>;
vsync-active = <1>;
};
};
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
};
};
&ecspi2 {
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&pwm1 {
status = "okay";
};