mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
2f887b9a44
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
128 lines
6.3 KiB
Plaintext
128 lines
6.3 KiB
Plaintext
# NTB Drivers
|
|
|
|
NTB (Non-Transparent Bridge) is a type of PCI-Express bridge chip that connects
|
|
the separate memory systems of two computers to the same PCI-Express fabric.
|
|
Existing NTB hardware supports a common feature set, including scratchpad
|
|
registers, doorbell registers, and memory translation windows. Scratchpad
|
|
registers are read-and-writable registers that are accessible from either side
|
|
of the device, so that peers can exchange a small amount of information at a
|
|
fixed address. Doorbell registers provide a way for peers to send interrupt
|
|
events. Memory windows allow translated read and write access to the peer
|
|
memory.
|
|
|
|
## NTB Core Driver (ntb)
|
|
|
|
The NTB core driver defines an api wrapping the common feature set, and allows
|
|
clients interested in NTB features to discover NTB the devices supported by
|
|
hardware drivers. The term "client" is used here to mean an upper layer
|
|
component making use of the NTB api. The term "driver," or "hardware driver,"
|
|
is used here to mean a driver for a specific vendor and model of NTB hardware.
|
|
|
|
## NTB Client Drivers
|
|
|
|
NTB client drivers should register with the NTB core driver. After
|
|
registering, the client probe and remove functions will be called appropriately
|
|
as ntb hardware, or hardware drivers, are inserted and removed. The
|
|
registration uses the Linux Device framework, so it should feel familiar to
|
|
anyone who has written a pci driver.
|
|
|
|
### NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)
|
|
|
|
The primary client for NTB is the Transport client, used in tandem with NTB
|
|
Netdev. These drivers function together to create a logical link to the peer,
|
|
across the ntb, to exchange packets of network data. The Transport client
|
|
establishes a logical link to the peer, and creates queue pairs to exchange
|
|
messages and data. The NTB Netdev then creates an ethernet device using a
|
|
Transport queue pair. Network data is copied between socket buffers and the
|
|
Transport queue pair buffer. The Transport client may be used for other things
|
|
besides Netdev, however no other applications have yet been written.
|
|
|
|
### NTB Ping Pong Test Client (ntb\_pingpong)
|
|
|
|
The Ping Pong test client serves as a demonstration to exercise the doorbell
|
|
and scratchpad registers of NTB hardware, and as an example simple NTB client.
|
|
Ping Pong enables the link when started, waits for the NTB link to come up, and
|
|
then proceeds to read and write the doorbell scratchpad registers of the NTB.
|
|
The peers interrupt each other using a bit mask of doorbell bits, which is
|
|
shifted by one in each round, to test the behavior of multiple doorbell bits
|
|
and interrupt vectors. The Ping Pong driver also reads the first local
|
|
scratchpad, and writes the value plus one to the first peer scratchpad, each
|
|
round before writing the peer doorbell register.
|
|
|
|
Module Parameters:
|
|
|
|
* unsafe - Some hardware has known issues with scratchpad and doorbell
|
|
registers. By default, Ping Pong will not attempt to exercise such
|
|
hardware. You may override this behavior at your own risk by setting
|
|
unsafe=1.
|
|
* delay\_ms - Specify the delay between receiving a doorbell
|
|
interrupt event and setting the peer doorbell register for the next
|
|
round.
|
|
* init\_db - Specify the doorbell bits to start new series of rounds. A new
|
|
series begins once all the doorbell bits have been shifted out of
|
|
range.
|
|
* dyndbg - It is suggested to specify dyndbg=+p when loading this module, and
|
|
then to observe debugging output on the console.
|
|
|
|
### NTB Tool Test Client (ntb\_tool)
|
|
|
|
The Tool test client serves for debugging, primarily, ntb hardware and drivers.
|
|
The Tool provides access through debugfs for reading, setting, and clearing the
|
|
NTB doorbell, and reading and writing scratchpads.
|
|
|
|
The Tool does not currently have any module parameters.
|
|
|
|
Debugfs Files:
|
|
|
|
* *debugfs*/ntb\_tool/*hw*/ - A directory in debugfs will be created for each
|
|
NTB device probed by the tool. This directory is shortened to *hw*
|
|
below.
|
|
* *hw*/db - This file is used to read, set, and clear the local doorbell. Not
|
|
all operations may be supported by all hardware. To read the doorbell,
|
|
read the file. To set the doorbell, write `s` followed by the bits to
|
|
set (eg: `echo 's 0x0101' > db`). To clear the doorbell, write `c`
|
|
followed by the bits to clear.
|
|
* *hw*/mask - This file is used to read, set, and clear the local doorbell mask.
|
|
See *db* for details.
|
|
* *hw*/peer\_db - This file is used to read, set, and clear the peer doorbell.
|
|
See *db* for details.
|
|
* *hw*/peer\_mask - This file is used to read, set, and clear the peer doorbell
|
|
mask. See *db* for details.
|
|
* *hw*/spad - This file is used to read and write local scratchpads. To read
|
|
the values of all scratchpads, read the file. To write values, write a
|
|
series of pairs of scratchpad number and value
|
|
(eg: `echo '4 0x123 7 0xabc' > spad`
|
|
# to set scratchpads `4` and `7` to `0x123` and `0xabc`, respectively).
|
|
* *hw*/peer\_spad - This file is used to read and write peer scratchpads. See
|
|
*spad* for details.
|
|
|
|
## NTB Hardware Drivers
|
|
|
|
NTB hardware drivers should register devices with the NTB core driver. After
|
|
registering, clients probe and remove functions will be called.
|
|
|
|
### NTB Intel Hardware Driver (ntb\_hw\_intel)
|
|
|
|
The Intel hardware driver supports NTB on Xeon and Atom CPUs.
|
|
|
|
Module Parameters:
|
|
|
|
* b2b\_mw\_idx - If the peer ntb is to be accessed via a memory window, then use
|
|
this memory window to access the peer ntb. A value of zero or positive
|
|
starts from the first mw idx, and a negative value starts from the last
|
|
mw idx. Both sides MUST set the same value here! The default value is
|
|
`-1`.
|
|
* b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
|
|
the memory window is large enough, still allow the client to use the
|
|
second half of the memory window for address translation to the peer.
|
|
* xeon\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use
|
|
this 64 bit address on the bus between the NTB devices for the window
|
|
at BAR2, on the upstream side of the link.
|
|
* xeon\_b2b\_usd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_usd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_usd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_dsd\_bar2\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_dsd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_dsd\_bar4\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
|
|
* xeon\_b2b\_dsd\_bar5\_addr32 - See *xeon\_b2b\_bar2\_addr64*.
|