linux/arch/arm/mach-mvebu/coherency_ll.S
Nick Desaulniers a2faac3986 ARM: 9263/1: use .arch directives instead of assembler command line flags
Similar to commit a6c30873ee ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").

GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.

Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.

The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.

clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]

Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.

Add a few more instances found in compile testing as found by Arnd and
Nathan.

Link: 1d51c699b9
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-11-08 18:36:17 +00:00

160 lines
4.0 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Coherency fabric: low level functions
*
* Copyright (C) 2012 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file implements the assembly function to add a CPU to the
* coherency fabric. This function is called by each of the secondary
* CPUs during their early boot in an SMP kernel, this why this
* function have to callable from assembly. It can also be called by a
* primary CPU from C code during its boot.
*/
#include <linux/linkage.h>
#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
#include <asm/assembler.h>
#include <asm/cp15.h>
.arch armv7-a
.text
/*
* Returns the coherency base address in r1 (r0 is untouched), or 0 if
* the coherency fabric is not enabled.
*/
ENTRY(ll_get_coherency_base)
mrc p15, 0, r1, c1, c0, 0
tst r1, #CR_M @ Check MMU bit enabled
bne 1f
/*
* MMU is disabled, use the physical address of the coherency
* base address, (or 0x0 if the coherency fabric is not mapped)
*/
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
b 2f
1:
/*
* MMU is enabled, use the virtual address of the coherency
* base address.
*/
ldr r1, =coherency_base
ldr r1, [r1]
2:
ret lr
ENDPROC(ll_get_coherency_base)
/*
* Returns the coherency CPU mask in r3 (r0 is untouched). This
* coherency CPU mask can be used with the coherency fabric
* configuration and control registers. Note that the mask is already
* endian-swapped as appropriate so that the calling functions do not
* have to care about endianness issues while accessing the coherency
* fabric registers
*/
ENTRY(ll_get_coherency_cpumask)
mrc p15, 0, r3, cr0, cr0, 5
and r3, r3, #15
mov r2, #(1 << 24)
lsl r3, r2, r3
ARM_BE8(rev r3, r3)
ret lr
ENDPROC(ll_get_coherency_cpumask)
/*
* ll_add_cpu_to_smp_group(), ll_enable_coherency() and
* ll_disable_coherency() use the strex/ldrex instructions while the
* MMU can be disabled. The Armada XP SoC has an exclusive monitor
* that tracks transactions to Device and/or SO memory and thanks to
* that, exclusive transactions are functional even when the MMU is
* disabled.
*/
ENTRY(ll_add_cpu_to_smp_group)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
1:
ldrex r2, [r0]
orr r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
ret lr
ENDPROC(ll_add_cpu_to_smp_group)
ENTRY(ll_enable_coherency)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
1:
ldrex r2, [r0]
orr r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
dsb
mov r0, #0
ret lr
ENDPROC(ll_enable_coherency)
ENTRY(ll_disable_coherency)
/*
* As r0 is not modified by ll_get_coherency_base() and
* ll_get_coherency_cpumask(), we use it to temporarly save lr
* and avoid it being modified by the branch and link
* calls. This function is used very early in the secondary
* CPU boot, and no stack is available at this point.
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
1:
ldrex r2, [r0]
bic r2, r2, r3
strex r1, r2, [r0]
cmp r1, #0
bne 1b
dsb
ret lr
ENDPROC(ll_disable_coherency)
.align 2
3:
.long coherency_phys_base - .