mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
2ef7d5f342
The compatible string "simple-bus" is well defined in ePAPR, while I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or Documentation/devicetree/. DT is also used by other projects than Linux kernel. It is not a good idea to rely on such an unofficial binding. This commit - replaces "arm,amba-bus" with "simple-bus" - drops "arm,amba-bus" where it is used along with "simple-bus" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
1237 lines
30 KiB
Plaintext
1237 lines
30 KiB
Plaintext
/*
|
|
* SAMSUNG EXYNOS5420 SoC device tree source
|
|
*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
|
|
* EXYNOS5420 based board files can include this file and provide
|
|
* values for board specfic bindings.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos5420.h>
|
|
#include "exynos5.dtsi"
|
|
|
|
#include <dt-bindings/clock/exynos-audss-clk.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos5420", "samsung,exynos5";
|
|
|
|
aliases {
|
|
mshc0 = &mmc_0;
|
|
mshc1 = &mmc_1;
|
|
mshc2 = &mmc_2;
|
|
pinctrl0 = &pinctrl_0;
|
|
pinctrl1 = &pinctrl_1;
|
|
pinctrl2 = &pinctrl_2;
|
|
pinctrl3 = &pinctrl_3;
|
|
pinctrl4 = &pinctrl_4;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
i2c2 = &i2c_2;
|
|
i2c3 = &i2c_3;
|
|
i2c4 = &hsi2c_4;
|
|
i2c5 = &hsi2c_5;
|
|
i2c6 = &hsi2c_6;
|
|
i2c7 = &hsi2c_7;
|
|
i2c8 = &hsi2c_8;
|
|
i2c9 = &hsi2c_9;
|
|
i2c10 = &hsi2c_10;
|
|
gsc0 = &gsc_0;
|
|
gsc1 = &gsc_1;
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
usbdrdphy0 = &usbdrd_phy0;
|
|
usbdrdphy1 = &usbdrd_phy1;
|
|
};
|
|
|
|
cluster_a15_opp_table: opp_table0 {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
opp@1800000000 {
|
|
opp-hz = /bits/ 64 <1800000000>;
|
|
opp-microvolt = <1250000>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1700000000 {
|
|
opp-hz = /bits/ 64 <1700000000>;
|
|
opp-microvolt = <1212500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1600000000 {
|
|
opp-hz = /bits/ 64 <1600000000>;
|
|
opp-microvolt = <1175000>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1500000000 {
|
|
opp-hz = /bits/ 64 <1500000000>;
|
|
opp-microvolt = <1137500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1400000000 {
|
|
opp-hz = /bits/ 64 <1400000000>;
|
|
opp-microvolt = <1112500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1300000000 {
|
|
opp-hz = /bits/ 64 <1300000000>;
|
|
opp-microvolt = <1062500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1200000000 {
|
|
opp-hz = /bits/ 64 <1200000000>;
|
|
opp-microvolt = <1037500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1100000000 {
|
|
opp-hz = /bits/ 64 <1100000000>;
|
|
opp-microvolt = <1012500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1000000000 {
|
|
opp-hz = /bits/ 64 <1000000000>;
|
|
opp-microvolt = < 987500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@900000000 {
|
|
opp-hz = /bits/ 64 <900000000>;
|
|
opp-microvolt = < 962500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = < 937500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@700000000 {
|
|
opp-hz = /bits/ 64 <700000000>;
|
|
opp-microvolt = < 912500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
};
|
|
|
|
cluster_a7_opp_table: opp_table1 {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
opp@1300000000 {
|
|
opp-hz = /bits/ 64 <1300000000>;
|
|
opp-microvolt = <1275000>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1200000000 {
|
|
opp-hz = /bits/ 64 <1200000000>;
|
|
opp-microvolt = <1212500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1100000000 {
|
|
opp-hz = /bits/ 64 <1100000000>;
|
|
opp-microvolt = <1162500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@1000000000 {
|
|
opp-hz = /bits/ 64 <1000000000>;
|
|
opp-microvolt = <1112500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@900000000 {
|
|
opp-hz = /bits/ 64 <900000000>;
|
|
opp-microvolt = <1062500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <1025000>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@700000000 {
|
|
opp-hz = /bits/ 64 <700000000>;
|
|
opp-microvolt = <975000>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
opp@600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
opp-microvolt = <937500>;
|
|
clock-latency-ns = <140000>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The 'cpus' node is not present here but instead it is provided
|
|
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
|
|
*/
|
|
|
|
cci: cci@10d20000 {
|
|
compatible = "arm,cci-400";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10d20000 0x1000>;
|
|
ranges = <0x0 0x10d20000 0x6000>;
|
|
|
|
cci_control0: slave-if@4000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x4000 0x1000>;
|
|
};
|
|
cci_control1: slave-if@5000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x5000 0x1000>;
|
|
};
|
|
};
|
|
|
|
sysram@02020000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x02020000 0x54000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x02020000 0x54000>;
|
|
|
|
smp-sysram@0 {
|
|
compatible = "samsung,exynos4210-sysram";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
smp-sysram@53000 {
|
|
compatible = "samsung,exynos4210-sysram-ns";
|
|
reg = <0x53000 0x1000>;
|
|
};
|
|
};
|
|
|
|
clock: clock-controller@10010000 {
|
|
compatible = "samsung,exynos5420-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_audss: audss-clock-controller@3810000 {
|
|
compatible = "samsung,exynos5420-audss-clock";
|
|
reg = <0x03810000 0x0C>;
|
|
#clock-cells = <1>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
|
|
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
|
|
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
|
};
|
|
|
|
mfc: codec@11000000 {
|
|
compatible = "samsung,mfc-v7";
|
|
reg = <0x11000000 0x10000>;
|
|
interrupts = <0 96 0>;
|
|
clocks = <&clock CLK_MFC>;
|
|
clock-names = "mfc";
|
|
power-domains = <&mfc_pd>;
|
|
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
|
|
iommu-names = "left", "right";
|
|
};
|
|
|
|
mmc_0: mmc@12200000 {
|
|
compatible = "samsung,exynos5420-dw-mshc-smu";
|
|
interrupts = <0 75 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12200000 0x2000>;
|
|
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_1: mmc@12210000 {
|
|
compatible = "samsung,exynos5420-dw-mshc-smu";
|
|
interrupts = <0 76 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12210000 0x2000>;
|
|
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_2: mmc@12220000 {
|
|
compatible = "samsung,exynos5420-dw-mshc";
|
|
interrupts = <0 77 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12220000 0x1000>;
|
|
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mct: mct@101C0000 {
|
|
compatible = "samsung,exynos4210-mct";
|
|
reg = <0x101C0000 0x800>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&mct_map>;
|
|
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
|
|
<8>, <9>, <10>, <11>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
|
clock-names = "fin_pll", "mct";
|
|
|
|
mct_map: mct-map {
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0 &combiner 23 3>,
|
|
<1 &combiner 23 4>,
|
|
<2 &combiner 25 2>,
|
|
<3 &combiner 25 3>,
|
|
<4 &gic 0 120 0>,
|
|
<5 &gic 0 121 0>,
|
|
<6 &gic 0 122 0>,
|
|
<7 &gic 0 123 0>,
|
|
<8 &gic 0 128 0>,
|
|
<9 &gic 0 129 0>,
|
|
<10 &gic 0 130 0>,
|
|
<11 &gic 0 131 0>;
|
|
};
|
|
};
|
|
|
|
gsc_pd: power-domain@10044000 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044000 0x20>;
|
|
#power-domain-cells = <0>;
|
|
clocks = <&clock CLK_FIN_PLL>,
|
|
<&clock CLK_MOUT_USER_ACLK300_GSCL>,
|
|
<&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
|
|
clock-names = "oscclk", "clk0", "asb0", "asb1";
|
|
};
|
|
|
|
isp_pd: power-domain@10044020 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044020 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
mfc_pd: power-domain@10044060 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044060 0x20>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
|
|
clock-names = "oscclk", "clk0";
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
msc_pd: power-domain@10044120 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044120 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
disp_pd: power-domain@100440C0 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x100440C0 0x20>;
|
|
#power-domain-cells = <0>;
|
|
clocks = <&clock CLK_FIN_PLL>,
|
|
<&clock CLK_MOUT_USER_ACLK200_DISP1>,
|
|
<&clock CLK_MOUT_USER_ACLK300_DISP1>,
|
|
<&clock CLK_MOUT_USER_ACLK400_DISP1>,
|
|
<&clock CLK_FIMD1>, <&clock CLK_MIXER>;
|
|
clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
|
|
};
|
|
|
|
pinctrl_0: pinctrl@13400000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x13400000 0x1000>;
|
|
interrupts = <0 45 0>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 32 0>;
|
|
};
|
|
};
|
|
|
|
pinctrl_1: pinctrl@13410000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x13410000 0x1000>;
|
|
interrupts = <0 78 0>;
|
|
};
|
|
|
|
pinctrl_2: pinctrl@14000000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x14000000 0x1000>;
|
|
interrupts = <0 46 0>;
|
|
};
|
|
|
|
pinctrl_3: pinctrl@14010000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x14010000 0x1000>;
|
|
interrupts = <0 50 0>;
|
|
};
|
|
|
|
pinctrl_4: pinctrl@03860000 {
|
|
compatible = "samsung,exynos5420-pinctrl";
|
|
reg = <0x03860000 0x1000>;
|
|
interrupts = <0 47 0>;
|
|
};
|
|
|
|
amba {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
adma: adma@03880000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x03880000 0x1000>;
|
|
interrupts = <0 110 0>;
|
|
clocks = <&clock_audss EXYNOS_ADMA>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <6>;
|
|
#dma-requests = <16>;
|
|
};
|
|
|
|
pdma0: pdma@121A0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121A0000 0x1000>;
|
|
interrupts = <0 34 0>;
|
|
clocks = <&clock CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@121B0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121B0000 0x1000>;
|
|
interrupts = <0 35 0>;
|
|
clocks = <&clock CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
mdma0: mdma@10800000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10800000 0x1000>;
|
|
interrupts = <0 33 0>;
|
|
clocks = <&clock CLK_MDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
|
|
mdma1: mdma@11C10000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x11C10000 0x1000>;
|
|
interrupts = <0 124 0>;
|
|
clocks = <&clock CLK_MDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
/*
|
|
* MDMA1 can support both secure and non-secure
|
|
* AXI transactions. When this is enabled in the kernel
|
|
* for boards that run in secure mode, we are getting
|
|
* imprecise external aborts causing the kernel to oops.
|
|
*/
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x03830000 0x100>;
|
|
dmas = <&adma 0
|
|
&adma 2
|
|
&adma 1>;
|
|
dma-names = "tx", "rx", "tx-sec";
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_SCLK_I2S>;
|
|
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk0";
|
|
#sound-dai-cells = <1>;
|
|
samsung,idma-addr = <0x03000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@12D60000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x12D60000 0x100>;
|
|
dmas = <&pdma1 12
|
|
&pdma1 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk1";
|
|
#sound-dai-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@12D70000 {
|
|
compatible = "samsung,exynos5420-i2s";
|
|
reg = <0x12D70000 0x100>;
|
|
dmas = <&pdma0 12
|
|
&pdma0 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "i2s_cdclk2";
|
|
#sound-dai-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@12d20000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d20000 0x100>;
|
|
interrupts = <0 68 0>;
|
|
dmas = <&pdma0 5
|
|
&pdma0 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@12d30000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d30000 0x100>;
|
|
interrupts = <0 69 0>;
|
|
dmas = <&pdma1 5
|
|
&pdma1 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_2: spi@12d40000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x12d40000 0x100>;
|
|
interrupts = <0 70 0>;
|
|
dmas = <&pdma0 7
|
|
&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus>;
|
|
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@12dd0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x12dd0000 0x100>;
|
|
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&clock CLK_PWM>;
|
|
clock-names = "timers";
|
|
};
|
|
|
|
dp_phy: video-phy@10040728 {
|
|
compatible = "samsung,exynos5420-dp-video-phy";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
mipi_phy: video-phy@10040714 {
|
|
compatible = "samsung,s5pv210-mipi-video-phy";
|
|
syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
dsi@14500000 {
|
|
compatible = "samsung,exynos5410-mipi-dsi";
|
|
reg = <0x14500000 0x10000>;
|
|
interrupts = <0 82 0>;
|
|
phys = <&mipi_phy 1>;
|
|
phy-names = "dsim";
|
|
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
|
|
clock-names = "bus_clk", "pll_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
adc: adc@12D10000 {
|
|
compatible = "samsung,exynos-adc-v2";
|
|
reg = <0x12D10000 0x100>;
|
|
interrupts = <0 106 0>;
|
|
clocks = <&clock CLK_TSADC>;
|
|
clock-names = "adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_0: i2c@12C60000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C60000 0x100>;
|
|
interrupts = <0 56 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_1: i2c@12C70000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C70000 0x100>;
|
|
interrupts = <0 57 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_2: i2c@12C80000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C80000 0x100>;
|
|
interrupts = <0 58 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_3: i2c@12C90000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C90000 0x100>;
|
|
interrupts = <0 59 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_4: i2c@12CA0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CA0000 0x1000>;
|
|
interrupts = <0 60 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_hs_bus>;
|
|
clocks = <&clock CLK_USI0>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_5: i2c@12CB0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CB0000 0x1000>;
|
|
interrupts = <0 61 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_hs_bus>;
|
|
clocks = <&clock CLK_USI1>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_6: i2c@12CC0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CC0000 0x1000>;
|
|
interrupts = <0 62 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_hs_bus>;
|
|
clocks = <&clock CLK_USI2>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_7: i2c@12CD0000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12CD0000 0x1000>;
|
|
interrupts = <0 63 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_hs_bus>;
|
|
clocks = <&clock CLK_USI3>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_8: i2c@12E00000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E00000 0x1000>;
|
|
interrupts = <0 87 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c8_hs_bus>;
|
|
clocks = <&clock CLK_USI4>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_9: i2c@12E10000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E10000 0x1000>;
|
|
interrupts = <0 88 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c9_hs_bus>;
|
|
clocks = <&clock CLK_USI5>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hsi2c_10: i2c@12E20000 {
|
|
compatible = "samsung,exynos5-hsi2c";
|
|
reg = <0x12E20000 0x1000>;
|
|
interrupts = <0 203 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c10_hs_bus>;
|
|
clocks = <&clock CLK_USI6>;
|
|
clock-names = "hsi2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi@14530000 {
|
|
compatible = "samsung,exynos5420-hdmi";
|
|
reg = <0x14530000 0x70000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
|
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
|
<&clock CLK_MOUT_HDMI>;
|
|
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
|
"sclk_hdmiphy", "mout_hdmi";
|
|
phy = <&hdmiphy>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
power-domains = <&disp_pd>;
|
|
};
|
|
|
|
hdmiphy: hdmiphy@145D0000 {
|
|
reg = <0x145D0000 0x20>;
|
|
};
|
|
|
|
mixer: mixer@14450000 {
|
|
compatible = "samsung,exynos5420-mixer";
|
|
reg = <0x14450000 0x10000>;
|
|
interrupts = <0 94 0>;
|
|
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
|
|
<&clock CLK_SCLK_HDMI>;
|
|
clock-names = "mixer", "hdmi", "sclk_hdmi";
|
|
power-domains = <&disp_pd>;
|
|
iommus = <&sysmmu_tv>;
|
|
};
|
|
|
|
rotator: rotator@11C00000 {
|
|
compatible = "samsung,exynos5250-rotator";
|
|
reg = <0x11C00000 0x64>;
|
|
interrupts = <0 84 0>;
|
|
clocks = <&clock CLK_ROTATOR>;
|
|
clock-names = "rotator";
|
|
iommus = <&sysmmu_rotator>;
|
|
};
|
|
|
|
gsc_0: video-scaler@13e00000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e00000 0x1000>;
|
|
interrupts = <0 85 0>;
|
|
clocks = <&clock CLK_GSCL0>;
|
|
clock-names = "gscl";
|
|
power-domains = <&gsc_pd>;
|
|
iommus = <&sysmmu_gscl0>;
|
|
};
|
|
|
|
gsc_1: video-scaler@13e10000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e10000 0x1000>;
|
|
interrupts = <0 86 0>;
|
|
clocks = <&clock CLK_GSCL1>;
|
|
clock-names = "gscl";
|
|
power-domains = <&gsc_pd>;
|
|
iommus = <&sysmmu_gscl1>;
|
|
};
|
|
|
|
jpeg_0: jpeg@11F50000 {
|
|
compatible = "samsung,exynos5420-jpeg";
|
|
reg = <0x11F50000 0x1000>;
|
|
interrupts = <0 89 0>;
|
|
clock-names = "jpeg";
|
|
clocks = <&clock CLK_JPEG>;
|
|
iommus = <&sysmmu_jpeg0>;
|
|
};
|
|
|
|
jpeg_1: jpeg@11F60000 {
|
|
compatible = "samsung,exynos5420-jpeg";
|
|
reg = <0x11F60000 0x1000>;
|
|
interrupts = <0 168 0>;
|
|
clock-names = "jpeg";
|
|
clocks = <&clock CLK_JPEG2>;
|
|
iommus = <&sysmmu_jpeg1>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10040000 {
|
|
compatible = "samsung,exynos5420-pmu", "syscon";
|
|
reg = <0x10040000 0x5000>;
|
|
clock-names = "clkout16";
|
|
clocks = <&clock CLK_FIN_PLL>;
|
|
#clock-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
sysreg_system_controller: syscon@10050000 {
|
|
compatible = "samsung,exynos5-sysreg", "syscon";
|
|
reg = <0x10050000 0x5000>;
|
|
};
|
|
|
|
tmu_cpu0: tmu@10060000 {
|
|
compatible = "samsung,exynos5420-tmu";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <0 65 0>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
tmu_cpu1: tmu@10064000 {
|
|
compatible = "samsung,exynos5420-tmu";
|
|
reg = <0x10064000 0x100>;
|
|
interrupts = <0 183 0>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
tmu_cpu2: tmu@10068000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
|
|
interrupts = <0 184 0>;
|
|
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
tmu_cpu3: tmu@1006c000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
|
|
interrupts = <0 185 0>;
|
|
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
tmu_gpu: tmu@100a0000 {
|
|
compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
|
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
|
|
interrupts = <0 215 0>;
|
|
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu0_thermal: cpu0-thermal {
|
|
thermal-sensors = <&tmu_cpu0>;
|
|
#include "exynos5420-trip-points.dtsi"
|
|
};
|
|
cpu1_thermal: cpu1-thermal {
|
|
thermal-sensors = <&tmu_cpu1>;
|
|
#include "exynos5420-trip-points.dtsi"
|
|
};
|
|
cpu2_thermal: cpu2-thermal {
|
|
thermal-sensors = <&tmu_cpu2>;
|
|
#include "exynos5420-trip-points.dtsi"
|
|
};
|
|
cpu3_thermal: cpu3-thermal {
|
|
thermal-sensors = <&tmu_cpu3>;
|
|
#include "exynos5420-trip-points.dtsi"
|
|
};
|
|
gpu_thermal: gpu-thermal {
|
|
thermal-sensors = <&tmu_gpu>;
|
|
#include "exynos5420-trip-points.dtsi"
|
|
};
|
|
};
|
|
|
|
watchdog: watchdog@101D0000 {
|
|
compatible = "samsung,exynos5420-wdt";
|
|
reg = <0x101D0000 0x100>;
|
|
interrupts = <0 42 0>;
|
|
clocks = <&clock CLK_WDT>;
|
|
clock-names = "watchdog";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
sss: sss@10830000 {
|
|
compatible = "samsung,exynos4210-secss";
|
|
reg = <0x10830000 0x300>;
|
|
interrupts = <0 112 0>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
|
|
usbdrd3_0: usb@12000000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USBD300>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbdrd_dwc3_0: dwc3 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x12000000 0x10000>;
|
|
interrupts = <0 72 0>;
|
|
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy0: phy@12100000 {
|
|
compatible = "samsung,exynos5420-usbdrd-phy";
|
|
reg = <0x12100000 0x100>;
|
|
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
usbdrd3_1: usb@12400000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USBD301>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbdrd_dwc3_1: dwc3 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x12400000 0x10000>;
|
|
interrupts = <0 73 0>;
|
|
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy1: phy@12500000 {
|
|
compatible = "samsung,exynos5420-usbdrd-phy";
|
|
reg = <0x12500000 0x100>;
|
|
clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
usbhost2: usb@12110000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12110000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USBH20>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy 1>;
|
|
};
|
|
};
|
|
|
|
usbhost1: usb@12120000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12120000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USBH20>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy 1>;
|
|
};
|
|
};
|
|
|
|
usb2_phy: phy@12130000 {
|
|
compatible = "samsung,exynos5250-usb2-phy";
|
|
reg = <0x12130000 0x100>;
|
|
clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
sysmmu_g2dr: sysmmu@0x10A60000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x10A60000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <24 5>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_g2dw: sysmmu@0x10A70000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x10A70000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <22 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_tv: sysmmu@0x14650000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x14650000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <7 4>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
|
|
power-domains = <&disp_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gscl0: sysmmu@0x13E80000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13E80000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
|
|
power-domains = <&gsc_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gscl1: sysmmu@0x13E90000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13E90000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
|
|
power-domains = <&gsc_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler0r: sysmmu@0x12880000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x12880000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <22 4>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler1r: sysmmu@0x12890000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x12890000 0x1000>;
|
|
interrupts = <0 186 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler2r: sysmmu@0x128A0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x128A0000 0x1000>;
|
|
interrupts = <0 188 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler0w: sysmmu@0x128C0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x128C0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <27 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler1w: sysmmu@0x128D0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x128D0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <22 6>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_scaler2w: sysmmu@0x128E0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x128E0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <19 6>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_rotator: sysmmu@0x11D40000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11D40000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_jpeg0: sysmmu@0x11F10000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11F10000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_jpeg1: sysmmu@0x11F20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11F20000 0x1000>;
|
|
interrupts = <0 169 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_mfc_l: sysmmu@0x11200000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11200000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <6 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
|
|
power-domains = <&mfc_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_mfc_r: sysmmu@0x11210000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11210000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <8 5>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
|
|
power-domains = <&mfc_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimd1_0: sysmmu@0x14640000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x14640000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <3 2>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
|
|
power-domains = <&disp_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimd1_1: sysmmu@0x14680000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x14680000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <3 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
|
|
power-domains = <&disp_pd>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&dp {
|
|
clocks = <&clock CLK_DP1>;
|
|
clock-names = "dp";
|
|
phys = <&dp_phy>;
|
|
phy-names = "dp";
|
|
power-domains = <&disp_pd>;
|
|
};
|
|
|
|
&fimd {
|
|
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
power-domains = <&disp_pd>;
|
|
iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
|
|
iommu-names = "m0", "m1";
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&clock CLK_RTC>;
|
|
clock-names = "rtc";
|
|
interrupt-parent = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&serial_0 {
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_1 {
|
|
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_2 {
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_3 {
|
|
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
#include "exynos5420-pinctrl.dtsi"
|