mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
1802d0beec
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
481 lines
14 KiB
C
481 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for the ACCES 104-DIO-48E series
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This driver supports the following ACCES devices: 104-DIO-48E and
|
|
* 104-DIO-24E.
|
|
*/
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define DIO48E_EXTENT 16
|
|
#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_DIO48E];
|
|
static unsigned int num_dio48e;
|
|
module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
|
|
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
|
|
|
|
static unsigned int irq[MAX_NUM_DIO48E];
|
|
module_param_hw_array(irq, uint, irq, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
|
|
|
|
/**
|
|
* struct dio48e_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @io_state: bit I/O state (whether bit is set to input or output)
|
|
* @out_state: output bits state
|
|
* @control: Control registers state
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @irq_mask: I/O bits affected by interrupts
|
|
*/
|
|
struct dio48e_gpio {
|
|
struct gpio_chip chip;
|
|
unsigned char io_state[6];
|
|
unsigned char out_state[6];
|
|
unsigned char control[2];
|
|
raw_spinlock_t lock;
|
|
unsigned base;
|
|
unsigned char irq_mask;
|
|
};
|
|
|
|
static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
|
|
return !!(dio48egpio->io_state[port] & mask);
|
|
}
|
|
|
|
static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
|
|
unsigned long flags;
|
|
unsigned control;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] |= 0xF0;
|
|
dio48egpio->control[control_port] |= BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0x0F;
|
|
dio48egpio->control[control_port] |= BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0xFF;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] |= BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] |= BIT(1);
|
|
}
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
outb(control, control_addr);
|
|
control &= ~BIT(7);
|
|
outb(control, control_addr);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
|
|
const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
|
|
unsigned long flags;
|
|
unsigned control;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] &= 0x0F;
|
|
dio48egpio->control[control_port] &= ~BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0xF0;
|
|
dio48egpio->control[control_port] &= ~BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0x00;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] &= ~BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] &= ~BIT(1);
|
|
}
|
|
|
|
if (value)
|
|
dio48egpio->out_state[io_port] |= mask;
|
|
else
|
|
dio48egpio->out_state[io_port] &= ~mask;
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
outb(control, control_addr);
|
|
|
|
outb(dio48egpio->out_state[io_port], dio48egpio->base + out_port);
|
|
|
|
control &= ~BIT(7);
|
|
outb(control, control_addr);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned in_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
unsigned port_state;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* ensure that GPIO is set for input */
|
|
if (!(dio48egpio->io_state[port] & mask)) {
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port_state = inb(dio48egpio->base + in_port);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return !!(port_state & mask);
|
|
}
|
|
|
|
static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
size_t i;
|
|
static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
|
|
const unsigned int gpio_reg_size = 8;
|
|
unsigned int bits_offset;
|
|
size_t word_index;
|
|
unsigned int word_offset;
|
|
unsigned long word_mask;
|
|
const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
|
|
unsigned long port_state;
|
|
|
|
/* clear bits array to a clean slate */
|
|
bitmap_zero(bits, chip->ngpio);
|
|
|
|
/* get bits are evaluated a gpio port register at a time */
|
|
for (i = 0; i < ARRAY_SIZE(ports); i++) {
|
|
/* gpio offset in bits array */
|
|
bits_offset = i * gpio_reg_size;
|
|
|
|
/* word index for bits array */
|
|
word_index = BIT_WORD(bits_offset);
|
|
|
|
/* gpio offset within current word of bits array */
|
|
word_offset = bits_offset % BITS_PER_LONG;
|
|
|
|
/* mask of get bits for current gpio within current word */
|
|
word_mask = mask[word_index] & (port_mask << word_offset);
|
|
if (!word_mask) {
|
|
/* no get bits in this port so skip to next one */
|
|
continue;
|
|
}
|
|
|
|
/* read bits from current gpio port */
|
|
port_state = inb(dio48egpio->base + ports[i]);
|
|
|
|
/* store acquired bits at respective bits array offset */
|
|
bits[word_index] |= (port_state << word_offset) & word_mask;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned out_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (value)
|
|
dio48egpio->out_state[port] |= mask;
|
|
else
|
|
dio48egpio->out_state[port] &= ~mask;
|
|
|
|
outb(dio48egpio->out_state[port], dio48egpio->base + out_port);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
unsigned int i;
|
|
const unsigned int gpio_reg_size = 8;
|
|
unsigned int port;
|
|
unsigned int out_port;
|
|
unsigned int bitmask;
|
|
unsigned long flags;
|
|
|
|
/* set bits are evaluated a gpio register size at a time */
|
|
for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
|
|
/* no more set bits in this mask word; skip to the next word */
|
|
if (!mask[BIT_WORD(i)]) {
|
|
i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
|
|
continue;
|
|
}
|
|
|
|
port = i / gpio_reg_size;
|
|
out_port = (port > 2) ? port + 1 : port;
|
|
bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)];
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* update output state data and set device gpio register */
|
|
dio48egpio->out_state[port] &= ~mask[BIT_WORD(i)];
|
|
dio48egpio->out_state[port] |= bitmask;
|
|
outb(dio48egpio->out_state[port], dio48egpio->base + out_port);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
/* prepare for next gpio register set */
|
|
mask[BIT_WORD(i)] >>= gpio_reg_size;
|
|
bits[BIT_WORD(i)] >>= gpio_reg_size;
|
|
}
|
|
}
|
|
|
|
static void dio48e_irq_ack(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static void dio48e_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask &= ~BIT(0);
|
|
else
|
|
dio48egpio->irq_mask &= ~BIT(1);
|
|
|
|
if (!dio48egpio->irq_mask)
|
|
/* disable interrupts */
|
|
inb(dio48egpio->base + 0xB);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (!dio48egpio->irq_mask) {
|
|
/* enable interrupts */
|
|
outb(0x00, dio48egpio->base + 0xF);
|
|
outb(0x00, dio48egpio->base + 0xB);
|
|
}
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask |= BIT(0);
|
|
else
|
|
dio48egpio->irq_mask |= BIT(1);
|
|
|
|
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static int dio48e_irq_set_type(struct irq_data *data, unsigned flow_type)
|
|
{
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return -EINVAL;
|
|
|
|
if (flow_type != IRQ_TYPE_NONE && flow_type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip dio48e_irqchip = {
|
|
.name = "104-dio-48e",
|
|
.irq_ack = dio48e_irq_ack,
|
|
.irq_mask = dio48e_irq_mask,
|
|
.irq_unmask = dio48e_irq_unmask,
|
|
.irq_set_type = dio48e_irq_set_type
|
|
};
|
|
|
|
static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = dev_id;
|
|
struct gpio_chip *const chip = &dio48egpio->chip;
|
|
const unsigned long irq_mask = dio48egpio->irq_mask;
|
|
unsigned long gpio;
|
|
|
|
for_each_set_bit(gpio, &irq_mask, 2)
|
|
generic_handle_irq(irq_find_mapping(chip->irq.domain,
|
|
19 + gpio*24));
|
|
|
|
raw_spin_lock(&dio48egpio->lock);
|
|
|
|
outb(0x00, dio48egpio->base + 0xF);
|
|
|
|
raw_spin_unlock(&dio48egpio->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define DIO48E_NGPIO 48
|
|
static const char *dio48e_names[DIO48E_NGPIO] = {
|
|
"PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
|
|
"PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
|
|
"PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0",
|
|
"PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
|
|
"PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
|
|
"PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
|
|
"PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
|
|
"PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
|
|
"PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
|
|
"PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
|
|
"PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0",
|
|
"PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
|
|
"PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
|
|
"PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
|
|
"PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
|
|
"PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
|
|
};
|
|
|
|
static int dio48e_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct dio48e_gpio *dio48egpio;
|
|
const char *const name = dev_name(dev);
|
|
int err;
|
|
|
|
dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL);
|
|
if (!dio48egpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + DIO48E_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
dio48egpio->chip.label = name;
|
|
dio48egpio->chip.parent = dev;
|
|
dio48egpio->chip.owner = THIS_MODULE;
|
|
dio48egpio->chip.base = -1;
|
|
dio48egpio->chip.ngpio = DIO48E_NGPIO;
|
|
dio48egpio->chip.names = dio48e_names;
|
|
dio48egpio->chip.get_direction = dio48e_gpio_get_direction;
|
|
dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
|
|
dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
|
|
dio48egpio->chip.get = dio48e_gpio_get;
|
|
dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple;
|
|
dio48egpio->chip.set = dio48e_gpio_set;
|
|
dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple;
|
|
dio48egpio->base = base[id];
|
|
|
|
raw_spin_lock_init(&dio48egpio->lock);
|
|
|
|
err = devm_gpiochip_add_data(dev, &dio48egpio->chip, dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* initialize all GPIO as output */
|
|
outb(0x80, base[id] + 3);
|
|
outb(0x00, base[id]);
|
|
outb(0x00, base[id] + 1);
|
|
outb(0x00, base[id] + 2);
|
|
outb(0x00, base[id] + 3);
|
|
outb(0x80, base[id] + 7);
|
|
outb(0x00, base[id] + 4);
|
|
outb(0x00, base[id] + 5);
|
|
outb(0x00, base[id] + 6);
|
|
outb(0x00, base[id] + 7);
|
|
|
|
/* disable IRQ by default */
|
|
inb(base[id] + 0xB);
|
|
|
|
err = gpiochip_irqchip_add(&dio48egpio->chip, &dio48e_irqchip, 0,
|
|
handle_edge_irq, IRQ_TYPE_NONE);
|
|
if (err) {
|
|
dev_err(dev, "Could not add irqchip (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = devm_request_irq(dev, irq[id], dio48e_irq_handler, 0, name,
|
|
dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "IRQ handler registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver dio48e_driver = {
|
|
.probe = dio48e_probe,
|
|
.driver = {
|
|
.name = "104-dio-48e"
|
|
},
|
|
};
|
|
module_isa_driver(dio48e_driver, num_dio48e);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|