mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
74ba9207e1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1234 lines
34 KiB
C
1234 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* asc7621.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
|
|
* Copyright (c) 2007, 2010 George Joseph <george.joseph@fairview5.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = {
|
|
0x2c, 0x2d, 0x2e, I2C_CLIENT_END
|
|
};
|
|
|
|
enum asc7621_type {
|
|
asc7621,
|
|
asc7621a
|
|
};
|
|
|
|
#define INTERVAL_HIGH (HZ + HZ / 2)
|
|
#define INTERVAL_LOW (1 * 60 * HZ)
|
|
#define PRI_NONE 0
|
|
#define PRI_LOW 1
|
|
#define PRI_HIGH 2
|
|
#define FIRST_CHIP asc7621
|
|
#define LAST_CHIP asc7621a
|
|
|
|
struct asc7621_chip {
|
|
char *name;
|
|
enum asc7621_type chip_type;
|
|
u8 company_reg;
|
|
u8 company_id;
|
|
u8 verstep_reg;
|
|
u8 verstep_id;
|
|
const unsigned short *addresses;
|
|
};
|
|
|
|
static struct asc7621_chip asc7621_chips[] = {
|
|
{
|
|
.name = "asc7621",
|
|
.chip_type = asc7621,
|
|
.company_reg = 0x3e,
|
|
.company_id = 0x61,
|
|
.verstep_reg = 0x3f,
|
|
.verstep_id = 0x6c,
|
|
.addresses = normal_i2c,
|
|
},
|
|
{
|
|
.name = "asc7621a",
|
|
.chip_type = asc7621a,
|
|
.company_reg = 0x3e,
|
|
.company_id = 0x61,
|
|
.verstep_reg = 0x3f,
|
|
.verstep_id = 0x6d,
|
|
.addresses = normal_i2c,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Defines the highest register to be used, not the count.
|
|
* The actual count will probably be smaller because of gaps
|
|
* in the implementation (unused register locations).
|
|
* This define will safely set the array size of both the parameter
|
|
* and data arrays.
|
|
* This comes from the data sheet register description table.
|
|
*/
|
|
#define LAST_REGISTER 0xff
|
|
|
|
struct asc7621_data {
|
|
struct i2c_client client;
|
|
struct device *class_dev;
|
|
struct mutex update_lock;
|
|
int valid; /* !=0 if following fields are valid */
|
|
unsigned long last_high_reading; /* In jiffies */
|
|
unsigned long last_low_reading; /* In jiffies */
|
|
/*
|
|
* Registers we care about occupy the corresponding index
|
|
* in the array. Registers we don't care about are left
|
|
* at 0.
|
|
*/
|
|
u8 reg[LAST_REGISTER + 1];
|
|
};
|
|
|
|
/*
|
|
* Macro to get the parent asc7621_param structure
|
|
* from a sensor_device_attribute passed into the
|
|
* show/store functions.
|
|
*/
|
|
#define to_asc7621_param(_sda) \
|
|
container_of(_sda, struct asc7621_param, sda)
|
|
|
|
/*
|
|
* Each parameter to be retrieved needs an asc7621_param structure
|
|
* allocated. It contains the sensor_device_attribute structure
|
|
* and the control info needed to retrieve the value from the register map.
|
|
*/
|
|
struct asc7621_param {
|
|
struct sensor_device_attribute sda;
|
|
u8 priority;
|
|
u8 msb[3];
|
|
u8 lsb[3];
|
|
u8 mask[3];
|
|
u8 shift[3];
|
|
};
|
|
|
|
/*
|
|
* This is the map that ultimately indicates whether we'll be
|
|
* retrieving a register value or not, and at what frequency.
|
|
*/
|
|
static u8 asc7621_register_priorities[255];
|
|
|
|
static struct asc7621_data *asc7621_update_device(struct device *dev);
|
|
|
|
static inline u8 read_byte(struct i2c_client *client, u8 reg)
|
|
{
|
|
int res = i2c_smbus_read_byte_data(client, reg);
|
|
if (res < 0) {
|
|
dev_err(&client->dev,
|
|
"Unable to read from register 0x%02x.\n", reg);
|
|
return 0;
|
|
}
|
|
return res & 0xff;
|
|
}
|
|
|
|
static inline int write_byte(struct i2c_client *client, u8 reg, u8 data)
|
|
{
|
|
int res = i2c_smbus_write_byte_data(client, reg, data);
|
|
if (res < 0) {
|
|
dev_err(&client->dev,
|
|
"Unable to write value 0x%02x to register 0x%02x.\n",
|
|
data, reg);
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Data Handlers
|
|
* Each function handles the formatting, storage
|
|
* and retrieval of like parameters.
|
|
*/
|
|
|
|
#define SETUP_SHOW_DATA_PARAM(d, a) \
|
|
struct sensor_device_attribute *sda = to_sensor_dev_attr(a); \
|
|
struct asc7621_data *data = asc7621_update_device(d); \
|
|
struct asc7621_param *param = to_asc7621_param(sda)
|
|
|
|
#define SETUP_STORE_DATA_PARAM(d, a) \
|
|
struct sensor_device_attribute *sda = to_sensor_dev_attr(a); \
|
|
struct i2c_client *client = to_i2c_client(d); \
|
|
struct asc7621_data *data = i2c_get_clientdata(client); \
|
|
struct asc7621_param *param = to_asc7621_param(sda)
|
|
|
|
/*
|
|
* u8 is just what it sounds like...an unsigned byte with no
|
|
* special formatting.
|
|
*/
|
|
static ssize_t show_u8(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
|
|
return sprintf(buf, "%u\n", data->reg[param->msb[0]]);
|
|
}
|
|
|
|
static ssize_t store_u8(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
reqval = clamp_val(reqval, 0, 255);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->reg[param->msb[0]] = reqval;
|
|
write_byte(client, param->msb[0], reqval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Many of the config values occupy only a few bits of a register.
|
|
*/
|
|
static ssize_t show_bitmask(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
|
|
return sprintf(buf, "%u\n",
|
|
(data->reg[param->msb[0]] >> param->
|
|
shift[0]) & param->mask[0]);
|
|
}
|
|
|
|
static ssize_t store_bitmask(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
u8 currval;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
reqval = clamp_val(reqval, 0, param->mask[0]);
|
|
|
|
reqval = (reqval & param->mask[0]) << param->shift[0];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
currval = read_byte(client, param->msb[0]);
|
|
reqval |= (currval & ~(param->mask[0] << param->shift[0]));
|
|
data->reg[param->msb[0]] = reqval;
|
|
write_byte(client, param->msb[0], reqval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* 16 bit fan rpm values
|
|
* reported by the device as the number of 11.111us periods (90khz)
|
|
* between full fan rotations. Therefore...
|
|
* RPM = (90000 * 60) / register value
|
|
*/
|
|
static ssize_t show_fan16(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u16 regval;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
regval = (data->reg[param->msb[0]] << 8) | data->reg[param->lsb[0]];
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return sprintf(buf, "%u\n",
|
|
(regval == 0 ? -1 : (regval) ==
|
|
0xffff ? 0 : 5400000 / regval));
|
|
}
|
|
|
|
static ssize_t store_fan16(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If a minimum RPM of zero is requested, then we set the register to
|
|
* 0xffff. This value allows the fan to be stopped completely without
|
|
* generating an alarm.
|
|
*/
|
|
reqval =
|
|
(reqval <= 0 ? 0xffff : clamp_val(5400000 / reqval, 0, 0xfffe));
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->reg[param->msb[0]] = (reqval >> 8) & 0xff;
|
|
data->reg[param->lsb[0]] = reqval & 0xff;
|
|
write_byte(client, param->msb[0], data->reg[param->msb[0]]);
|
|
write_byte(client, param->lsb[0], data->reg[param->lsb[0]]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Voltages are scaled in the device so that the nominal voltage
|
|
* is 3/4ths of the 0-255 range (i.e. 192).
|
|
* If all voltages are 'normal' then all voltage registers will
|
|
* read 0xC0.
|
|
*
|
|
* The data sheet provides us with the 3/4 scale value for each voltage
|
|
* which is stored in in_scaling. The sda->index parameter value provides
|
|
* the index into in_scaling.
|
|
*
|
|
* NOTE: The chip expects the first 2 inputs be 2.5 and 2.25 volts
|
|
* respectively. That doesn't mean that's what the motherboard provides. :)
|
|
*/
|
|
|
|
static const int asc7621_in_scaling[] = {
|
|
2500, 2250, 3300, 5000, 12000
|
|
};
|
|
|
|
static ssize_t show_in10(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u16 regval;
|
|
u8 nr = sda->index;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
regval = (data->reg[param->msb[0]] << 8) | (data->reg[param->lsb[0]]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
/* The LSB value is a 2-bit scaling of the MSB's LSbit value. */
|
|
regval = (regval >> 6) * asc7621_in_scaling[nr] / (0xc0 << 2);
|
|
|
|
return sprintf(buf, "%u\n", regval);
|
|
}
|
|
|
|
/* 8 bit voltage values (the mins and maxs) */
|
|
static ssize_t show_in8(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 nr = sda->index;
|
|
|
|
return sprintf(buf, "%u\n",
|
|
((data->reg[param->msb[0]] *
|
|
asc7621_in_scaling[nr]) / 0xc0));
|
|
}
|
|
|
|
static ssize_t store_in8(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
u8 nr = sda->index;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
reqval = clamp_val(reqval, 0, 0xffff);
|
|
|
|
reqval = reqval * 0xc0 / asc7621_in_scaling[nr];
|
|
|
|
reqval = clamp_val(reqval, 0, 0xff);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->reg[param->msb[0]] = reqval;
|
|
write_byte(client, param->msb[0], reqval);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_temp8(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
|
|
return sprintf(buf, "%d\n", ((s8) data->reg[param->msb[0]]) * 1000);
|
|
}
|
|
|
|
static ssize_t store_temp8(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
s8 temp;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
reqval = clamp_val(reqval, -127000, 127000);
|
|
|
|
temp = reqval / 1000;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->reg[param->msb[0]] = temp;
|
|
write_byte(client, param->msb[0], temp);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Temperatures that occupy 2 bytes always have the whole
|
|
* number of degrees in the MSB with some part of the LSB
|
|
* indicating fractional degrees.
|
|
*/
|
|
|
|
/* mmmmmmmm.llxxxxxx */
|
|
static ssize_t show_temp10(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 msb, lsb;
|
|
int temp;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
msb = data->reg[param->msb[0]];
|
|
lsb = (data->reg[param->lsb[0]] >> 6) & 0x03;
|
|
temp = (((s8) msb) * 1000) + (lsb * 250);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return sprintf(buf, "%d\n", temp);
|
|
}
|
|
|
|
/* mmmmmm.ll */
|
|
static ssize_t show_temp62(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 regval = data->reg[param->msb[0]];
|
|
int temp = ((s8) (regval & 0xfc) * 1000) + ((regval & 0x03) * 250);
|
|
|
|
return sprintf(buf, "%d\n", temp);
|
|
}
|
|
|
|
static ssize_t store_temp62(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval, i, f;
|
|
s8 temp;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
reqval = clamp_val(reqval, -32000, 31750);
|
|
i = reqval / 1000;
|
|
f = reqval - (i * 1000);
|
|
temp = i << 2;
|
|
temp |= f / 250;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->reg[param->msb[0]] = temp;
|
|
write_byte(client, param->msb[0], temp);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* The aSC7621 doesn't provide an "auto_point2". Instead, you
|
|
* specify the auto_point1 and a range. To keep with the sysfs
|
|
* hwmon specs, we synthesize the auto_point_2 from them.
|
|
*/
|
|
|
|
static const u32 asc7621_range_map[] = {
|
|
2000, 2500, 3330, 4000, 5000, 6670, 8000, 10000,
|
|
13330, 16000, 20000, 26670, 32000, 40000, 53330, 80000,
|
|
};
|
|
|
|
static ssize_t show_ap2_temp(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
long auto_point1;
|
|
u8 regval;
|
|
int temp;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
auto_point1 = ((s8) data->reg[param->msb[1]]) * 1000;
|
|
regval =
|
|
((data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0]);
|
|
temp = auto_point1 + asc7621_range_map[clamp_val(regval, 0, 15)];
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return sprintf(buf, "%d\n", temp);
|
|
|
|
}
|
|
|
|
static ssize_t store_ap2_temp(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval, auto_point1;
|
|
int i;
|
|
u8 currval, newval = 0;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
auto_point1 = data->reg[param->msb[1]] * 1000;
|
|
reqval = clamp_val(reqval, auto_point1 + 2000, auto_point1 + 80000);
|
|
|
|
for (i = ARRAY_SIZE(asc7621_range_map) - 1; i >= 0; i--) {
|
|
if (reqval >= auto_point1 + asc7621_range_map[i]) {
|
|
newval = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
newval = (newval & param->mask[0]) << param->shift[0];
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval |= (currval & ~(param->mask[0] << param->shift[0]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm_ac(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 config, altbit, regval;
|
|
static const u8 map[] = {
|
|
0x01, 0x02, 0x04, 0x1f, 0x00, 0x06, 0x07, 0x10,
|
|
0x08, 0x0f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f
|
|
};
|
|
|
|
mutex_lock(&data->update_lock);
|
|
config = (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
|
|
altbit = (data->reg[param->msb[1]] >> param->shift[1]) & param->mask[1];
|
|
regval = config | (altbit << 3);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return sprintf(buf, "%u\n", map[clamp_val(regval, 0, 15)]);
|
|
}
|
|
|
|
static ssize_t store_pwm_ac(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
unsigned long reqval;
|
|
u8 currval, config, altbit, newval;
|
|
static const u16 map[] = {
|
|
0x04, 0x00, 0x01, 0xff, 0x02, 0xff, 0x05, 0x06,
|
|
0x08, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f,
|
|
0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03,
|
|
};
|
|
|
|
if (kstrtoul(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
if (reqval > 31)
|
|
return -EINVAL;
|
|
|
|
reqval = map[reqval];
|
|
if (reqval == 0xff)
|
|
return -EINVAL;
|
|
|
|
config = reqval & 0x07;
|
|
altbit = (reqval >> 3) & 0x01;
|
|
|
|
config = (config & param->mask[0]) << param->shift[0];
|
|
altbit = (altbit & param->mask[1]) << param->shift[1];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval = config | (currval & ~(param->mask[0] << param->shift[0]));
|
|
newval = altbit | (newval & ~(param->mask[1] << param->shift[1]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm_enable(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 config, altbit, minoff, val, newval;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
config = (data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
|
|
altbit = (data->reg[param->msb[1]] >> param->shift[1]) & param->mask[1];
|
|
minoff = (data->reg[param->msb[2]] >> param->shift[2]) & param->mask[2];
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
val = config | (altbit << 3);
|
|
|
|
if (val == 3 || val >= 10)
|
|
newval = 255;
|
|
else if (val == 4)
|
|
newval = 0;
|
|
else if (val == 7)
|
|
newval = 1;
|
|
else if (minoff == 1)
|
|
newval = 2;
|
|
else
|
|
newval = 3;
|
|
|
|
return sprintf(buf, "%u\n", newval);
|
|
}
|
|
|
|
static ssize_t store_pwm_enable(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
u8 currval, config, altbit, newval, minoff = 255;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
switch (reqval) {
|
|
case 0:
|
|
newval = 0x04;
|
|
break;
|
|
case 1:
|
|
newval = 0x07;
|
|
break;
|
|
case 2:
|
|
newval = 0x00;
|
|
minoff = 1;
|
|
break;
|
|
case 3:
|
|
newval = 0x00;
|
|
minoff = 0;
|
|
break;
|
|
case 255:
|
|
newval = 0x03;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
config = newval & 0x07;
|
|
altbit = (newval >> 3) & 0x01;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
config = (config & param->mask[0]) << param->shift[0];
|
|
altbit = (altbit & param->mask[1]) << param->shift[1];
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval = config | (currval & ~(param->mask[0] << param->shift[0]));
|
|
newval = altbit | (newval & ~(param->mask[1] << param->shift[1]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
if (minoff < 255) {
|
|
minoff = (minoff & param->mask[2]) << param->shift[2];
|
|
currval = read_byte(client, param->msb[2]);
|
|
newval =
|
|
minoff | (currval & ~(param->mask[2] << param->shift[2]));
|
|
data->reg[param->msb[2]] = newval;
|
|
write_byte(client, param->msb[2], newval);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static const u32 asc7621_pwm_freq_map[] = {
|
|
10, 15, 23, 30, 38, 47, 62, 94,
|
|
23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000
|
|
};
|
|
|
|
static ssize_t show_pwm_freq(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 regval =
|
|
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
|
|
|
|
regval = clamp_val(regval, 0, 15);
|
|
|
|
return sprintf(buf, "%u\n", asc7621_pwm_freq_map[regval]);
|
|
}
|
|
|
|
static ssize_t store_pwm_freq(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
unsigned long reqval;
|
|
u8 currval, newval = 255;
|
|
int i;
|
|
|
|
if (kstrtoul(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_pwm_freq_map); i++) {
|
|
if (reqval == asc7621_pwm_freq_map[i]) {
|
|
newval = i;
|
|
break;
|
|
}
|
|
}
|
|
if (newval == 255)
|
|
return -EINVAL;
|
|
|
|
newval = (newval & param->mask[0]) << param->shift[0];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval |= (currval & ~(param->mask[0] << param->shift[0]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static const u32 asc7621_pwm_auto_spinup_map[] = {
|
|
0, 100, 250, 400, 700, 1000, 2000, 4000
|
|
};
|
|
|
|
static ssize_t show_pwm_ast(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 regval =
|
|
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
|
|
|
|
regval = clamp_val(regval, 0, 7);
|
|
|
|
return sprintf(buf, "%u\n", asc7621_pwm_auto_spinup_map[regval]);
|
|
|
|
}
|
|
|
|
static ssize_t store_pwm_ast(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
u8 currval, newval = 255;
|
|
u32 i;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_pwm_auto_spinup_map); i++) {
|
|
if (reqval == asc7621_pwm_auto_spinup_map[i]) {
|
|
newval = i;
|
|
break;
|
|
}
|
|
}
|
|
if (newval == 255)
|
|
return -EINVAL;
|
|
|
|
newval = (newval & param->mask[0]) << param->shift[0];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval |= (currval & ~(param->mask[0] << param->shift[0]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static const u32 asc7621_temp_smoothing_time_map[] = {
|
|
35000, 17600, 11800, 7000, 4400, 3000, 1600, 800
|
|
};
|
|
|
|
static ssize_t show_temp_st(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
SETUP_SHOW_DATA_PARAM(dev, attr);
|
|
u8 regval =
|
|
(data->reg[param->msb[0]] >> param->shift[0]) & param->mask[0];
|
|
regval = clamp_val(regval, 0, 7);
|
|
|
|
return sprintf(buf, "%u\n", asc7621_temp_smoothing_time_map[regval]);
|
|
}
|
|
|
|
static ssize_t store_temp_st(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
SETUP_STORE_DATA_PARAM(dev, attr);
|
|
long reqval;
|
|
u8 currval, newval = 255;
|
|
u32 i;
|
|
|
|
if (kstrtol(buf, 10, &reqval))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_temp_smoothing_time_map); i++) {
|
|
if (reqval == asc7621_temp_smoothing_time_map[i]) {
|
|
newval = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (newval == 255)
|
|
return -EINVAL;
|
|
|
|
newval = (newval & param->mask[0]) << param->shift[0];
|
|
|
|
mutex_lock(&data->update_lock);
|
|
currval = read_byte(client, param->msb[0]);
|
|
newval |= (currval & ~(param->mask[0] << param->shift[0]));
|
|
data->reg[param->msb[0]] = newval;
|
|
write_byte(client, param->msb[0], newval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* End of data handlers
|
|
*
|
|
* These defines do nothing more than make the table easier
|
|
* to read when wrapped at column 80.
|
|
*/
|
|
|
|
/*
|
|
* Creates a variable length array inititalizer.
|
|
* VAA(1,3,5,7) would produce {1,3,5,7}
|
|
*/
|
|
#define VAA(args...) {args}
|
|
|
|
#define PREAD(name, n, pri, rm, rl, m, s, r) \
|
|
{.sda = SENSOR_ATTR(name, S_IRUGO, show_##r, NULL, n), \
|
|
.priority = pri, .msb[0] = rm, .lsb[0] = rl, .mask[0] = m, \
|
|
.shift[0] = s,}
|
|
|
|
#define PWRITE(name, n, pri, rm, rl, m, s, r) \
|
|
{.sda = SENSOR_ATTR(name, S_IRUGO | S_IWUSR, show_##r, store_##r, n), \
|
|
.priority = pri, .msb[0] = rm, .lsb[0] = rl, .mask[0] = m, \
|
|
.shift[0] = s,}
|
|
|
|
/*
|
|
* PWRITEM assumes that the initializers for the .msb, .lsb, .mask and .shift
|
|
* were created using the VAA macro.
|
|
*/
|
|
#define PWRITEM(name, n, pri, rm, rl, m, s, r) \
|
|
{.sda = SENSOR_ATTR(name, S_IRUGO | S_IWUSR, show_##r, store_##r, n), \
|
|
.priority = pri, .msb = rm, .lsb = rl, .mask = m, .shift = s,}
|
|
|
|
static struct asc7621_param asc7621_params[] = {
|
|
PREAD(in0_input, 0, PRI_HIGH, 0x20, 0x13, 0, 0, in10),
|
|
PREAD(in1_input, 1, PRI_HIGH, 0x21, 0x18, 0, 0, in10),
|
|
PREAD(in2_input, 2, PRI_HIGH, 0x22, 0x11, 0, 0, in10),
|
|
PREAD(in3_input, 3, PRI_HIGH, 0x23, 0x12, 0, 0, in10),
|
|
PREAD(in4_input, 4, PRI_HIGH, 0x24, 0x14, 0, 0, in10),
|
|
|
|
PWRITE(in0_min, 0, PRI_LOW, 0x44, 0, 0, 0, in8),
|
|
PWRITE(in1_min, 1, PRI_LOW, 0x46, 0, 0, 0, in8),
|
|
PWRITE(in2_min, 2, PRI_LOW, 0x48, 0, 0, 0, in8),
|
|
PWRITE(in3_min, 3, PRI_LOW, 0x4a, 0, 0, 0, in8),
|
|
PWRITE(in4_min, 4, PRI_LOW, 0x4c, 0, 0, 0, in8),
|
|
|
|
PWRITE(in0_max, 0, PRI_LOW, 0x45, 0, 0, 0, in8),
|
|
PWRITE(in1_max, 1, PRI_LOW, 0x47, 0, 0, 0, in8),
|
|
PWRITE(in2_max, 2, PRI_LOW, 0x49, 0, 0, 0, in8),
|
|
PWRITE(in3_max, 3, PRI_LOW, 0x4b, 0, 0, 0, in8),
|
|
PWRITE(in4_max, 4, PRI_LOW, 0x4d, 0, 0, 0, in8),
|
|
|
|
PREAD(in0_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 0, bitmask),
|
|
PREAD(in1_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 1, bitmask),
|
|
PREAD(in2_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 2, bitmask),
|
|
PREAD(in3_alarm, 3, PRI_HIGH, 0x41, 0, 0x01, 3, bitmask),
|
|
PREAD(in4_alarm, 4, PRI_HIGH, 0x42, 0, 0x01, 0, bitmask),
|
|
|
|
PREAD(fan1_input, 0, PRI_HIGH, 0x29, 0x28, 0, 0, fan16),
|
|
PREAD(fan2_input, 1, PRI_HIGH, 0x2b, 0x2a, 0, 0, fan16),
|
|
PREAD(fan3_input, 2, PRI_HIGH, 0x2d, 0x2c, 0, 0, fan16),
|
|
PREAD(fan4_input, 3, PRI_HIGH, 0x2f, 0x2e, 0, 0, fan16),
|
|
|
|
PWRITE(fan1_min, 0, PRI_LOW, 0x55, 0x54, 0, 0, fan16),
|
|
PWRITE(fan2_min, 1, PRI_LOW, 0x57, 0x56, 0, 0, fan16),
|
|
PWRITE(fan3_min, 2, PRI_LOW, 0x59, 0x58, 0, 0, fan16),
|
|
PWRITE(fan4_min, 3, PRI_LOW, 0x5b, 0x5a, 0, 0, fan16),
|
|
|
|
PREAD(fan1_alarm, 0, PRI_HIGH, 0x42, 0, 0x01, 2, bitmask),
|
|
PREAD(fan2_alarm, 1, PRI_HIGH, 0x42, 0, 0x01, 3, bitmask),
|
|
PREAD(fan3_alarm, 2, PRI_HIGH, 0x42, 0, 0x01, 4, bitmask),
|
|
PREAD(fan4_alarm, 3, PRI_HIGH, 0x42, 0, 0x01, 5, bitmask),
|
|
|
|
PREAD(temp1_input, 0, PRI_HIGH, 0x25, 0x10, 0, 0, temp10),
|
|
PREAD(temp2_input, 1, PRI_HIGH, 0x26, 0x15, 0, 0, temp10),
|
|
PREAD(temp3_input, 2, PRI_HIGH, 0x27, 0x16, 0, 0, temp10),
|
|
PREAD(temp4_input, 3, PRI_HIGH, 0x33, 0x17, 0, 0, temp10),
|
|
PREAD(temp5_input, 4, PRI_HIGH, 0xf7, 0xf6, 0, 0, temp10),
|
|
PREAD(temp6_input, 5, PRI_HIGH, 0xf9, 0xf8, 0, 0, temp10),
|
|
PREAD(temp7_input, 6, PRI_HIGH, 0xfb, 0xfa, 0, 0, temp10),
|
|
PREAD(temp8_input, 7, PRI_HIGH, 0xfd, 0xfc, 0, 0, temp10),
|
|
|
|
PWRITE(temp1_min, 0, PRI_LOW, 0x4e, 0, 0, 0, temp8),
|
|
PWRITE(temp2_min, 1, PRI_LOW, 0x50, 0, 0, 0, temp8),
|
|
PWRITE(temp3_min, 2, PRI_LOW, 0x52, 0, 0, 0, temp8),
|
|
PWRITE(temp4_min, 3, PRI_LOW, 0x34, 0, 0, 0, temp8),
|
|
|
|
PWRITE(temp1_max, 0, PRI_LOW, 0x4f, 0, 0, 0, temp8),
|
|
PWRITE(temp2_max, 1, PRI_LOW, 0x51, 0, 0, 0, temp8),
|
|
PWRITE(temp3_max, 2, PRI_LOW, 0x53, 0, 0, 0, temp8),
|
|
PWRITE(temp4_max, 3, PRI_LOW, 0x35, 0, 0, 0, temp8),
|
|
|
|
PREAD(temp1_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 4, bitmask),
|
|
PREAD(temp2_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 5, bitmask),
|
|
PREAD(temp3_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 6, bitmask),
|
|
PREAD(temp4_alarm, 3, PRI_HIGH, 0x43, 0, 0x01, 0, bitmask),
|
|
|
|
PWRITE(temp1_source, 0, PRI_LOW, 0x02, 0, 0x07, 4, bitmask),
|
|
PWRITE(temp2_source, 1, PRI_LOW, 0x02, 0, 0x07, 0, bitmask),
|
|
PWRITE(temp3_source, 2, PRI_LOW, 0x03, 0, 0x07, 4, bitmask),
|
|
PWRITE(temp4_source, 3, PRI_LOW, 0x03, 0, 0x07, 0, bitmask),
|
|
|
|
PWRITE(temp1_smoothing_enable, 0, PRI_LOW, 0x62, 0, 0x01, 3, bitmask),
|
|
PWRITE(temp2_smoothing_enable, 1, PRI_LOW, 0x63, 0, 0x01, 7, bitmask),
|
|
PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x63, 0, 0x01, 3, bitmask),
|
|
PWRITE(temp4_smoothing_enable, 3, PRI_LOW, 0x3c, 0, 0x01, 3, bitmask),
|
|
|
|
PWRITE(temp1_smoothing_time, 0, PRI_LOW, 0x62, 0, 0x07, 0, temp_st),
|
|
PWRITE(temp2_smoothing_time, 1, PRI_LOW, 0x63, 0, 0x07, 4, temp_st),
|
|
PWRITE(temp3_smoothing_time, 2, PRI_LOW, 0x63, 0, 0x07, 0, temp_st),
|
|
PWRITE(temp4_smoothing_time, 3, PRI_LOW, 0x3c, 0, 0x07, 0, temp_st),
|
|
|
|
PWRITE(temp1_auto_point1_temp_hyst, 0, PRI_LOW, 0x6d, 0, 0x0f, 4,
|
|
bitmask),
|
|
PWRITE(temp2_auto_point1_temp_hyst, 1, PRI_LOW, 0x6d, 0, 0x0f, 0,
|
|
bitmask),
|
|
PWRITE(temp3_auto_point1_temp_hyst, 2, PRI_LOW, 0x6e, 0, 0x0f, 4,
|
|
bitmask),
|
|
PWRITE(temp4_auto_point1_temp_hyst, 3, PRI_LOW, 0x6e, 0, 0x0f, 0,
|
|
bitmask),
|
|
|
|
PREAD(temp1_auto_point2_temp_hyst, 0, PRI_LOW, 0x6d, 0, 0x0f, 4,
|
|
bitmask),
|
|
PREAD(temp2_auto_point2_temp_hyst, 1, PRI_LOW, 0x6d, 0, 0x0f, 0,
|
|
bitmask),
|
|
PREAD(temp3_auto_point2_temp_hyst, 2, PRI_LOW, 0x6e, 0, 0x0f, 4,
|
|
bitmask),
|
|
PREAD(temp4_auto_point2_temp_hyst, 3, PRI_LOW, 0x6e, 0, 0x0f, 0,
|
|
bitmask),
|
|
|
|
PWRITE(temp1_auto_point1_temp, 0, PRI_LOW, 0x67, 0, 0, 0, temp8),
|
|
PWRITE(temp2_auto_point1_temp, 1, PRI_LOW, 0x68, 0, 0, 0, temp8),
|
|
PWRITE(temp3_auto_point1_temp, 2, PRI_LOW, 0x69, 0, 0, 0, temp8),
|
|
PWRITE(temp4_auto_point1_temp, 3, PRI_LOW, 0x3b, 0, 0, 0, temp8),
|
|
|
|
PWRITEM(temp1_auto_point2_temp, 0, PRI_LOW, VAA(0x5f, 0x67), VAA(0),
|
|
VAA(0x0f), VAA(4), ap2_temp),
|
|
PWRITEM(temp2_auto_point2_temp, 1, PRI_LOW, VAA(0x60, 0x68), VAA(0),
|
|
VAA(0x0f), VAA(4), ap2_temp),
|
|
PWRITEM(temp3_auto_point2_temp, 2, PRI_LOW, VAA(0x61, 0x69), VAA(0),
|
|
VAA(0x0f), VAA(4), ap2_temp),
|
|
PWRITEM(temp4_auto_point2_temp, 3, PRI_LOW, VAA(0x3c, 0x3b), VAA(0),
|
|
VAA(0x0f), VAA(4), ap2_temp),
|
|
|
|
PWRITE(temp1_crit, 0, PRI_LOW, 0x6a, 0, 0, 0, temp8),
|
|
PWRITE(temp2_crit, 1, PRI_LOW, 0x6b, 0, 0, 0, temp8),
|
|
PWRITE(temp3_crit, 2, PRI_LOW, 0x6c, 0, 0, 0, temp8),
|
|
PWRITE(temp4_crit, 3, PRI_LOW, 0x3d, 0, 0, 0, temp8),
|
|
|
|
PWRITE(temp5_enable, 4, PRI_LOW, 0x0e, 0, 0x01, 0, bitmask),
|
|
PWRITE(temp6_enable, 5, PRI_LOW, 0x0e, 0, 0x01, 1, bitmask),
|
|
PWRITE(temp7_enable, 6, PRI_LOW, 0x0e, 0, 0x01, 2, bitmask),
|
|
PWRITE(temp8_enable, 7, PRI_LOW, 0x0e, 0, 0x01, 3, bitmask),
|
|
|
|
PWRITE(remote1_offset, 0, PRI_LOW, 0x1c, 0, 0, 0, temp62),
|
|
PWRITE(remote2_offset, 1, PRI_LOW, 0x1d, 0, 0, 0, temp62),
|
|
|
|
PWRITE(pwm1, 0, PRI_HIGH, 0x30, 0, 0, 0, u8),
|
|
PWRITE(pwm2, 1, PRI_HIGH, 0x31, 0, 0, 0, u8),
|
|
PWRITE(pwm3, 2, PRI_HIGH, 0x32, 0, 0, 0, u8),
|
|
|
|
PWRITE(pwm1_invert, 0, PRI_LOW, 0x5c, 0, 0x01, 4, bitmask),
|
|
PWRITE(pwm2_invert, 1, PRI_LOW, 0x5d, 0, 0x01, 4, bitmask),
|
|
PWRITE(pwm3_invert, 2, PRI_LOW, 0x5e, 0, 0x01, 4, bitmask),
|
|
|
|
PWRITEM(pwm1_enable, 0, PRI_LOW, VAA(0x5c, 0x5c, 0x62), VAA(0, 0, 0),
|
|
VAA(0x07, 0x01, 0x01), VAA(5, 3, 5), pwm_enable),
|
|
PWRITEM(pwm2_enable, 1, PRI_LOW, VAA(0x5d, 0x5d, 0x62), VAA(0, 0, 0),
|
|
VAA(0x07, 0x01, 0x01), VAA(5, 3, 6), pwm_enable),
|
|
PWRITEM(pwm3_enable, 2, PRI_LOW, VAA(0x5e, 0x5e, 0x62), VAA(0, 0, 0),
|
|
VAA(0x07, 0x01, 0x01), VAA(5, 3, 7), pwm_enable),
|
|
|
|
PWRITEM(pwm1_auto_channels, 0, PRI_LOW, VAA(0x5c, 0x5c), VAA(0, 0),
|
|
VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
|
|
PWRITEM(pwm2_auto_channels, 1, PRI_LOW, VAA(0x5d, 0x5d), VAA(0, 0),
|
|
VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
|
|
PWRITEM(pwm3_auto_channels, 2, PRI_LOW, VAA(0x5e, 0x5e), VAA(0, 0),
|
|
VAA(0x07, 0x01), VAA(5, 3), pwm_ac),
|
|
|
|
PWRITE(pwm1_auto_point1_pwm, 0, PRI_LOW, 0x64, 0, 0, 0, u8),
|
|
PWRITE(pwm2_auto_point1_pwm, 1, PRI_LOW, 0x65, 0, 0, 0, u8),
|
|
PWRITE(pwm3_auto_point1_pwm, 2, PRI_LOW, 0x66, 0, 0, 0, u8),
|
|
|
|
PWRITE(pwm1_auto_point2_pwm, 0, PRI_LOW, 0x38, 0, 0, 0, u8),
|
|
PWRITE(pwm2_auto_point2_pwm, 1, PRI_LOW, 0x39, 0, 0, 0, u8),
|
|
PWRITE(pwm3_auto_point2_pwm, 2, PRI_LOW, 0x3a, 0, 0, 0, u8),
|
|
|
|
PWRITE(pwm1_freq, 0, PRI_LOW, 0x5f, 0, 0x0f, 0, pwm_freq),
|
|
PWRITE(pwm2_freq, 1, PRI_LOW, 0x60, 0, 0x0f, 0, pwm_freq),
|
|
PWRITE(pwm3_freq, 2, PRI_LOW, 0x61, 0, 0x0f, 0, pwm_freq),
|
|
|
|
PREAD(pwm1_auto_zone_assigned, 0, PRI_LOW, 0, 0, 0x03, 2, bitmask),
|
|
PREAD(pwm2_auto_zone_assigned, 1, PRI_LOW, 0, 0, 0x03, 4, bitmask),
|
|
PREAD(pwm3_auto_zone_assigned, 2, PRI_LOW, 0, 0, 0x03, 6, bitmask),
|
|
|
|
PWRITE(pwm1_auto_spinup_time, 0, PRI_LOW, 0x5c, 0, 0x07, 0, pwm_ast),
|
|
PWRITE(pwm2_auto_spinup_time, 1, PRI_LOW, 0x5d, 0, 0x07, 0, pwm_ast),
|
|
PWRITE(pwm3_auto_spinup_time, 2, PRI_LOW, 0x5e, 0, 0x07, 0, pwm_ast),
|
|
|
|
PWRITE(peci_enable, 0, PRI_LOW, 0x40, 0, 0x01, 4, bitmask),
|
|
PWRITE(peci_avg, 0, PRI_LOW, 0x36, 0, 0x07, 0, bitmask),
|
|
PWRITE(peci_domain, 0, PRI_LOW, 0x36, 0, 0x01, 3, bitmask),
|
|
PWRITE(peci_legacy, 0, PRI_LOW, 0x36, 0, 0x01, 4, bitmask),
|
|
PWRITE(peci_diode, 0, PRI_LOW, 0x0e, 0, 0x07, 4, bitmask),
|
|
PWRITE(peci_4domain, 0, PRI_LOW, 0x0e, 0, 0x01, 4, bitmask),
|
|
|
|
};
|
|
|
|
static struct asc7621_data *asc7621_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct asc7621_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
/*
|
|
* The asc7621 chips guarantee consistent reads of multi-byte values
|
|
* regardless of the order of the reads. No special logic is needed
|
|
* so we can just read the registers in whatever order they appear
|
|
* in the asc7621_params array.
|
|
*/
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* Read all the high priority registers */
|
|
|
|
if (!data->valid ||
|
|
time_after(jiffies, data->last_high_reading + INTERVAL_HIGH)) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_register_priorities); i++) {
|
|
if (asc7621_register_priorities[i] == PRI_HIGH) {
|
|
data->reg[i] =
|
|
i2c_smbus_read_byte_data(client, i) & 0xff;
|
|
}
|
|
}
|
|
data->last_high_reading = jiffies;
|
|
} /* last_reading */
|
|
|
|
/* Read all the low priority registers. */
|
|
|
|
if (!data->valid ||
|
|
time_after(jiffies, data->last_low_reading + INTERVAL_LOW)) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
|
|
if (asc7621_register_priorities[i] == PRI_LOW) {
|
|
data->reg[i] =
|
|
i2c_smbus_read_byte_data(client, i) & 0xff;
|
|
}
|
|
}
|
|
data->last_low_reading = jiffies;
|
|
} /* last_reading */
|
|
|
|
data->valid = 1;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* Standard detection and initialization below
|
|
*
|
|
* Helper function that checks if an address is valid
|
|
* for a particular chip.
|
|
*/
|
|
|
|
static inline int valid_address_for_chip(int chip_type, int address)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; asc7621_chips[chip_type].addresses[i] != I2C_CLIENT_END;
|
|
i++) {
|
|
if (asc7621_chips[chip_type].addresses[i] == address)
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void asc7621_init_client(struct i2c_client *client)
|
|
{
|
|
int value;
|
|
|
|
/* Warn if part was not "READY" */
|
|
|
|
value = read_byte(client, 0x40);
|
|
|
|
if (value & 0x02) {
|
|
dev_err(&client->dev,
|
|
"Client (%d,0x%02x) config is locked.\n",
|
|
i2c_adapter_id(client->adapter), client->addr);
|
|
}
|
|
if (!(value & 0x04)) {
|
|
dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
|
|
i2c_adapter_id(client->adapter), client->addr);
|
|
}
|
|
|
|
/*
|
|
* Start monitoring
|
|
*
|
|
* Try to clear LOCK, Set START, save everything else
|
|
*/
|
|
value = (value & ~0x02) | 0x01;
|
|
write_byte(client, 0x40, value & 0xff);
|
|
|
|
}
|
|
|
|
static int
|
|
asc7621_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct asc7621_data *data;
|
|
int i, err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct asc7621_data),
|
|
GFP_KERNEL);
|
|
if (data == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the asc7621 chip */
|
|
asc7621_init_client(client);
|
|
|
|
/* Create the sysfs entries */
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
|
|
err =
|
|
device_create_file(&client->dev,
|
|
&(asc7621_params[i].sda.dev_attr));
|
|
if (err)
|
|
goto exit_remove;
|
|
}
|
|
|
|
data->class_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->class_dev)) {
|
|
err = PTR_ERR(data->class_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
|
|
device_remove_file(&client->dev,
|
|
&(asc7621_params[i].sda.dev_attr));
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int asc7621_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int company, verstep, chip_index;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
for (chip_index = FIRST_CHIP; chip_index <= LAST_CHIP; chip_index++) {
|
|
|
|
if (!valid_address_for_chip(chip_index, client->addr))
|
|
continue;
|
|
|
|
company = read_byte(client,
|
|
asc7621_chips[chip_index].company_reg);
|
|
verstep = read_byte(client,
|
|
asc7621_chips[chip_index].verstep_reg);
|
|
|
|
if (company == asc7621_chips[chip_index].company_id &&
|
|
verstep == asc7621_chips[chip_index].verstep_id) {
|
|
strlcpy(info->type, asc7621_chips[chip_index].name,
|
|
I2C_NAME_SIZE);
|
|
|
|
dev_info(&adapter->dev, "Matched %s at 0x%02x\n",
|
|
asc7621_chips[chip_index].name, client->addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int asc7621_remove(struct i2c_client *client)
|
|
{
|
|
struct asc7621_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
hwmon_device_unregister(data->class_dev);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
|
|
device_remove_file(&client->dev,
|
|
&(asc7621_params[i].sda.dev_attr));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id asc7621_id[] = {
|
|
{"asc7621", asc7621},
|
|
{"asc7621a", asc7621a},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, asc7621_id);
|
|
|
|
static struct i2c_driver asc7621_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "asc7621",
|
|
},
|
|
.probe = asc7621_probe,
|
|
.remove = asc7621_remove,
|
|
.id_table = asc7621_id,
|
|
.detect = asc7621_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
static int __init sm_asc7621_init(void)
|
|
{
|
|
int i, j;
|
|
/*
|
|
* Collect all the registers needed into a single array.
|
|
* This way, if a register isn't actually used for anything,
|
|
* we don't retrieve it.
|
|
*/
|
|
|
|
for (i = 0; i < ARRAY_SIZE(asc7621_params); i++) {
|
|
for (j = 0; j < ARRAY_SIZE(asc7621_params[i].msb); j++)
|
|
asc7621_register_priorities[asc7621_params[i].msb[j]] =
|
|
asc7621_params[i].priority;
|
|
for (j = 0; j < ARRAY_SIZE(asc7621_params[i].lsb); j++)
|
|
asc7621_register_priorities[asc7621_params[i].lsb[j]] =
|
|
asc7621_params[i].priority;
|
|
}
|
|
return i2c_add_driver(&asc7621_driver);
|
|
}
|
|
|
|
static void __exit sm_asc7621_exit(void)
|
|
{
|
|
i2c_del_driver(&asc7621_driver);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("George Joseph");
|
|
MODULE_DESCRIPTION("Andigilog aSC7621 and aSC7621a driver");
|
|
|
|
module_init(sm_asc7621_init);
|
|
module_exit(sm_asc7621_exit);
|