mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
a2fe7baa27
The xlnx_vcu driver is actually a clock controller driver which provides clocks that can be used by a driver for the encoder/decoder units. There is no reason to keep this driver in soc. Move the driver to clk. NOTE: The register mapping actually contains registers for AXI performance monitoring, but these are not used by the driver. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
744 lines
19 KiB
C
744 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Xilinx VCU Init
|
|
*
|
|
* Copyright (C) 2016 - 2017 Xilinx, Inc.
|
|
*
|
|
* Contacts Dhaval Shah <dshah@xilinx.com>
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/xlnx-vcu.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <dt-bindings/clock/xlnx-vcu.h>
|
|
|
|
#define VCU_PLL_CTRL 0x24
|
|
#define VCU_PLL_CTRL_RESET BIT(0)
|
|
#define VCU_PLL_CTRL_POR_IN BIT(1)
|
|
#define VCU_PLL_CTRL_PWR_POR BIT(2)
|
|
#define VCU_PLL_CTRL_BYPASS BIT(3)
|
|
#define VCU_PLL_CTRL_FBDIV GENMASK(14, 8)
|
|
#define VCU_PLL_CTRL_CLKOUTDIV GENMASK(18, 16)
|
|
|
|
#define VCU_PLL_CFG 0x28
|
|
#define VCU_PLL_CFG_RES GENMASK(3, 0)
|
|
#define VCU_PLL_CFG_CP GENMASK(8, 5)
|
|
#define VCU_PLL_CFG_LFHF GENMASK(12, 10)
|
|
#define VCU_PLL_CFG_LOCK_CNT GENMASK(22, 13)
|
|
#define VCU_PLL_CFG_LOCK_DLY GENMASK(31, 25)
|
|
#define VCU_ENC_CORE_CTRL 0x30
|
|
#define VCU_ENC_MCU_CTRL 0x34
|
|
#define VCU_DEC_CORE_CTRL 0x38
|
|
#define VCU_DEC_MCU_CTRL 0x3c
|
|
#define VCU_PLL_STATUS 0x60
|
|
#define VCU_PLL_STATUS_LOCK_STATUS BIT(0)
|
|
|
|
#define MHZ 1000000
|
|
#define FVCO_MIN (1500U * MHZ)
|
|
#define FVCO_MAX (3000U * MHZ)
|
|
|
|
/**
|
|
* struct xvcu_device - Xilinx VCU init device structure
|
|
* @dev: Platform device
|
|
* @pll_ref: pll ref clock source
|
|
* @aclk: axi clock source
|
|
* @logicore_reg_ba: logicore reg base address
|
|
* @vcu_slcr_ba: vcu_slcr Register base address
|
|
* @pll: handle for the VCU PLL
|
|
* @pll_post: handle for the VCU PLL post divider
|
|
* @clk_data: clocks provided by the vcu clock provider
|
|
*/
|
|
struct xvcu_device {
|
|
struct device *dev;
|
|
struct clk *pll_ref;
|
|
struct clk *aclk;
|
|
struct regmap *logicore_reg_ba;
|
|
void __iomem *vcu_slcr_ba;
|
|
struct clk_hw *pll;
|
|
struct clk_hw *pll_post;
|
|
struct clk_hw_onecell_data *clk_data;
|
|
};
|
|
|
|
static struct regmap_config vcu_settings_regmap_config = {
|
|
.name = "regmap",
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0xfff,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
/**
|
|
* struct xvcu_pll_cfg - Helper data
|
|
* @fbdiv: The integer portion of the feedback divider to the PLL
|
|
* @cp: PLL charge pump control
|
|
* @res: PLL loop filter resistor control
|
|
* @lfhf: PLL loop filter high frequency capacitor control
|
|
* @lock_dly: Lock circuit configuration settings for lock windowsize
|
|
* @lock_cnt: Lock circuit counter setting
|
|
*/
|
|
struct xvcu_pll_cfg {
|
|
u32 fbdiv;
|
|
u32 cp;
|
|
u32 res;
|
|
u32 lfhf;
|
|
u32 lock_dly;
|
|
u32 lock_cnt;
|
|
};
|
|
|
|
static const struct xvcu_pll_cfg xvcu_pll_cfg[] = {
|
|
{ 25, 3, 10, 3, 63, 1000 },
|
|
{ 26, 3, 10, 3, 63, 1000 },
|
|
{ 27, 4, 6, 3, 63, 1000 },
|
|
{ 28, 4, 6, 3, 63, 1000 },
|
|
{ 29, 4, 6, 3, 63, 1000 },
|
|
{ 30, 4, 6, 3, 63, 1000 },
|
|
{ 31, 6, 1, 3, 63, 1000 },
|
|
{ 32, 6, 1, 3, 63, 1000 },
|
|
{ 33, 4, 10, 3, 63, 1000 },
|
|
{ 34, 5, 6, 3, 63, 1000 },
|
|
{ 35, 5, 6, 3, 63, 1000 },
|
|
{ 36, 5, 6, 3, 63, 1000 },
|
|
{ 37, 5, 6, 3, 63, 1000 },
|
|
{ 38, 5, 6, 3, 63, 975 },
|
|
{ 39, 3, 12, 3, 63, 950 },
|
|
{ 40, 3, 12, 3, 63, 925 },
|
|
{ 41, 3, 12, 3, 63, 900 },
|
|
{ 42, 3, 12, 3, 63, 875 },
|
|
{ 43, 3, 12, 3, 63, 850 },
|
|
{ 44, 3, 12, 3, 63, 850 },
|
|
{ 45, 3, 12, 3, 63, 825 },
|
|
{ 46, 3, 12, 3, 63, 800 },
|
|
{ 47, 3, 12, 3, 63, 775 },
|
|
{ 48, 3, 12, 3, 63, 775 },
|
|
{ 49, 3, 12, 3, 63, 750 },
|
|
{ 50, 3, 12, 3, 63, 750 },
|
|
{ 51, 3, 2, 3, 63, 725 },
|
|
{ 52, 3, 2, 3, 63, 700 },
|
|
{ 53, 3, 2, 3, 63, 700 },
|
|
{ 54, 3, 2, 3, 63, 675 },
|
|
{ 55, 3, 2, 3, 63, 675 },
|
|
{ 56, 3, 2, 3, 63, 650 },
|
|
{ 57, 3, 2, 3, 63, 650 },
|
|
{ 58, 3, 2, 3, 63, 625 },
|
|
{ 59, 3, 2, 3, 63, 625 },
|
|
{ 60, 3, 2, 3, 63, 625 },
|
|
{ 61, 3, 2, 3, 63, 600 },
|
|
{ 62, 3, 2, 3, 63, 600 },
|
|
{ 63, 3, 2, 3, 63, 600 },
|
|
{ 64, 3, 2, 3, 63, 600 },
|
|
{ 65, 3, 2, 3, 63, 600 },
|
|
{ 66, 3, 2, 3, 63, 600 },
|
|
{ 67, 3, 2, 3, 63, 600 },
|
|
{ 68, 3, 2, 3, 63, 600 },
|
|
{ 69, 3, 2, 3, 63, 600 },
|
|
{ 70, 3, 2, 3, 63, 600 },
|
|
{ 71, 3, 2, 3, 63, 600 },
|
|
{ 72, 3, 2, 3, 63, 600 },
|
|
{ 73, 3, 2, 3, 63, 600 },
|
|
{ 74, 3, 2, 3, 63, 600 },
|
|
{ 75, 3, 2, 3, 63, 600 },
|
|
{ 76, 3, 2, 3, 63, 600 },
|
|
{ 77, 3, 2, 3, 63, 600 },
|
|
{ 78, 3, 2, 3, 63, 600 },
|
|
{ 79, 3, 2, 3, 63, 600 },
|
|
{ 80, 3, 2, 3, 63, 600 },
|
|
{ 81, 3, 2, 3, 63, 600 },
|
|
{ 82, 3, 2, 3, 63, 600 },
|
|
{ 83, 4, 2, 3, 63, 600 },
|
|
{ 84, 4, 2, 3, 63, 600 },
|
|
{ 85, 4, 2, 3, 63, 600 },
|
|
{ 86, 4, 2, 3, 63, 600 },
|
|
{ 87, 4, 2, 3, 63, 600 },
|
|
{ 88, 4, 2, 3, 63, 600 },
|
|
{ 89, 4, 2, 3, 63, 600 },
|
|
{ 90, 4, 2, 3, 63, 600 },
|
|
{ 91, 4, 2, 3, 63, 600 },
|
|
{ 92, 4, 2, 3, 63, 600 },
|
|
{ 93, 4, 2, 3, 63, 600 },
|
|
{ 94, 4, 2, 3, 63, 600 },
|
|
{ 95, 4, 2, 3, 63, 600 },
|
|
{ 96, 4, 2, 3, 63, 600 },
|
|
{ 97, 4, 2, 3, 63, 600 },
|
|
{ 98, 4, 2, 3, 63, 600 },
|
|
{ 99, 4, 2, 3, 63, 600 },
|
|
{ 100, 4, 2, 3, 63, 600 },
|
|
{ 101, 4, 2, 3, 63, 600 },
|
|
{ 102, 4, 2, 3, 63, 600 },
|
|
{ 103, 5, 2, 3, 63, 600 },
|
|
{ 104, 5, 2, 3, 63, 600 },
|
|
{ 105, 5, 2, 3, 63, 600 },
|
|
{ 106, 5, 2, 3, 63, 600 },
|
|
{ 107, 3, 4, 3, 63, 600 },
|
|
{ 108, 3, 4, 3, 63, 600 },
|
|
{ 109, 3, 4, 3, 63, 600 },
|
|
{ 110, 3, 4, 3, 63, 600 },
|
|
{ 111, 3, 4, 3, 63, 600 },
|
|
{ 112, 3, 4, 3, 63, 600 },
|
|
{ 113, 3, 4, 3, 63, 600 },
|
|
{ 114, 3, 4, 3, 63, 600 },
|
|
{ 115, 3, 4, 3, 63, 600 },
|
|
{ 116, 3, 4, 3, 63, 600 },
|
|
{ 117, 3, 4, 3, 63, 600 },
|
|
{ 118, 3, 4, 3, 63, 600 },
|
|
{ 119, 3, 4, 3, 63, 600 },
|
|
{ 120, 3, 4, 3, 63, 600 },
|
|
{ 121, 3, 4, 3, 63, 600 },
|
|
{ 122, 3, 4, 3, 63, 600 },
|
|
{ 123, 3, 4, 3, 63, 600 },
|
|
{ 124, 3, 4, 3, 63, 600 },
|
|
{ 125, 3, 4, 3, 63, 600 },
|
|
};
|
|
|
|
/**
|
|
* xvcu_read - Read from the VCU register space
|
|
* @iomem: vcu reg space base address
|
|
* @offset: vcu reg offset from base
|
|
*
|
|
* Return: Returns 32bit value from VCU register specified
|
|
*
|
|
*/
|
|
static inline u32 xvcu_read(void __iomem *iomem, u32 offset)
|
|
{
|
|
return ioread32(iomem + offset);
|
|
}
|
|
|
|
/**
|
|
* xvcu_write - Write to the VCU register space
|
|
* @iomem: vcu reg space base address
|
|
* @offset: vcu reg offset from base
|
|
* @value: Value to write
|
|
*/
|
|
static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value)
|
|
{
|
|
iowrite32(value, iomem + offset);
|
|
}
|
|
|
|
#define to_vcu_pll(_hw) container_of(_hw, struct vcu_pll, hw)
|
|
|
|
struct vcu_pll {
|
|
struct clk_hw hw;
|
|
void __iomem *reg_base;
|
|
unsigned long fvco_min;
|
|
unsigned long fvco_max;
|
|
};
|
|
|
|
static int xvcu_pll_wait_for_lock(struct vcu_pll *pll)
|
|
{
|
|
void __iomem *base = pll->reg_base;
|
|
unsigned long timeout;
|
|
u32 lock_status;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(2000);
|
|
do {
|
|
lock_status = xvcu_read(base, VCU_PLL_STATUS);
|
|
if (lock_status & VCU_PLL_STATUS_LOCK_STATUS)
|
|
return 0;
|
|
} while (!time_after(jiffies, timeout));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static struct clk_hw *xvcu_register_pll_post(struct device *dev,
|
|
const char *name,
|
|
const struct clk_hw *parent_hw,
|
|
void __iomem *reg_base)
|
|
{
|
|
u32 div;
|
|
u32 vcu_pll_ctrl;
|
|
|
|
/*
|
|
* The output divider of the PLL must be set to 1/2 to meet the
|
|
* timing in the design.
|
|
*/
|
|
vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL);
|
|
div = FIELD_GET(VCU_PLL_CTRL_CLKOUTDIV, vcu_pll_ctrl);
|
|
if (div != 1)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return clk_hw_register_fixed_factor(dev, "vcu_pll_post",
|
|
clk_hw_get_name(parent_hw),
|
|
CLK_SET_RATE_PARENT, 1, 2);
|
|
}
|
|
|
|
static const struct xvcu_pll_cfg *xvcu_find_cfg(int div)
|
|
{
|
|
const struct xvcu_pll_cfg *cfg = NULL;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xvcu_pll_cfg) - 1; i++)
|
|
if (xvcu_pll_cfg[i].fbdiv == div)
|
|
cfg = &xvcu_pll_cfg[i];
|
|
|
|
return cfg;
|
|
}
|
|
|
|
static int xvcu_pll_set_div(struct vcu_pll *pll, int div)
|
|
{
|
|
void __iomem *base = pll->reg_base;
|
|
const struct xvcu_pll_cfg *cfg = NULL;
|
|
u32 vcu_pll_ctrl;
|
|
u32 cfg_val;
|
|
|
|
cfg = xvcu_find_cfg(div);
|
|
if (!cfg)
|
|
return -EINVAL;
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
vcu_pll_ctrl &= ~VCU_PLL_CTRL_FBDIV;
|
|
vcu_pll_ctrl |= FIELD_PREP(VCU_PLL_CTRL_FBDIV, cfg->fbdiv);
|
|
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
|
|
|
|
cfg_val = FIELD_PREP(VCU_PLL_CFG_RES, cfg->res) |
|
|
FIELD_PREP(VCU_PLL_CFG_CP, cfg->cp) |
|
|
FIELD_PREP(VCU_PLL_CFG_LFHF, cfg->lfhf) |
|
|
FIELD_PREP(VCU_PLL_CFG_LOCK_CNT, cfg->lock_cnt) |
|
|
FIELD_PREP(VCU_PLL_CFG_LOCK_DLY, cfg->lock_dly);
|
|
xvcu_write(base, VCU_PLL_CFG, cfg_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long xvcu_pll_round_rate(struct clk_hw *hw,
|
|
unsigned long rate, unsigned long *parent_rate)
|
|
{
|
|
struct vcu_pll *pll = to_vcu_pll(hw);
|
|
unsigned int feedback_div;
|
|
|
|
rate = clamp_t(unsigned long, rate, pll->fvco_min, pll->fvco_max);
|
|
|
|
feedback_div = DIV_ROUND_CLOSEST_ULL(rate, *parent_rate);
|
|
feedback_div = clamp_t(unsigned int, feedback_div, 25, 125);
|
|
|
|
return *parent_rate * feedback_div;
|
|
}
|
|
|
|
static unsigned long xvcu_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct vcu_pll *pll = to_vcu_pll(hw);
|
|
void __iomem *base = pll->reg_base;
|
|
unsigned int div;
|
|
u32 vcu_pll_ctrl;
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
div = FIELD_GET(VCU_PLL_CTRL_FBDIV, vcu_pll_ctrl);
|
|
|
|
return div * parent_rate;
|
|
}
|
|
|
|
static int xvcu_pll_set_rate(struct clk_hw *hw,
|
|
unsigned long rate, unsigned long parent_rate)
|
|
{
|
|
struct vcu_pll *pll = to_vcu_pll(hw);
|
|
|
|
return xvcu_pll_set_div(pll, rate / parent_rate);
|
|
}
|
|
|
|
static int xvcu_pll_enable(struct clk_hw *hw)
|
|
{
|
|
struct vcu_pll *pll = to_vcu_pll(hw);
|
|
void __iomem *base = pll->reg_base;
|
|
u32 vcu_pll_ctrl;
|
|
int ret;
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
vcu_pll_ctrl |= VCU_PLL_CTRL_BYPASS;
|
|
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
vcu_pll_ctrl &= ~VCU_PLL_CTRL_POR_IN;
|
|
vcu_pll_ctrl &= ~VCU_PLL_CTRL_PWR_POR;
|
|
vcu_pll_ctrl &= ~VCU_PLL_CTRL_RESET;
|
|
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
|
|
|
|
ret = xvcu_pll_wait_for_lock(pll);
|
|
if (ret) {
|
|
pr_err("VCU PLL is not locked\n");
|
|
goto err;
|
|
}
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
vcu_pll_ctrl &= ~VCU_PLL_CTRL_BYPASS;
|
|
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void xvcu_pll_disable(struct clk_hw *hw)
|
|
{
|
|
struct vcu_pll *pll = to_vcu_pll(hw);
|
|
void __iomem *base = pll->reg_base;
|
|
u32 vcu_pll_ctrl;
|
|
|
|
vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
|
|
vcu_pll_ctrl |= VCU_PLL_CTRL_POR_IN;
|
|
vcu_pll_ctrl |= VCU_PLL_CTRL_PWR_POR;
|
|
vcu_pll_ctrl |= VCU_PLL_CTRL_RESET;
|
|
xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
|
|
}
|
|
|
|
static const struct clk_ops vcu_pll_ops = {
|
|
.enable = xvcu_pll_enable,
|
|
.disable = xvcu_pll_disable,
|
|
.round_rate = xvcu_pll_round_rate,
|
|
.recalc_rate = xvcu_pll_recalc_rate,
|
|
.set_rate = xvcu_pll_set_rate,
|
|
};
|
|
|
|
static struct clk_hw *xvcu_register_pll(struct device *dev,
|
|
void __iomem *reg_base,
|
|
const char *name, const char *parent,
|
|
unsigned long flags)
|
|
{
|
|
struct vcu_pll *pll;
|
|
struct clk_hw *hw;
|
|
struct clk_init_data init;
|
|
int ret;
|
|
|
|
init.name = name;
|
|
init.parent_names = &parent;
|
|
init.ops = &vcu_pll_ops;
|
|
init.num_parents = 1;
|
|
init.flags = flags;
|
|
|
|
pll = devm_kmalloc(dev, sizeof(*pll), GFP_KERNEL);
|
|
if (!pll)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pll->hw.init = &init;
|
|
pll->reg_base = reg_base;
|
|
pll->fvco_min = FVCO_MIN;
|
|
pll->fvco_max = FVCO_MAX;
|
|
|
|
hw = &pll->hw;
|
|
ret = devm_clk_hw_register(dev, hw);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
clk_hw_set_rate_range(hw, pll->fvco_min, pll->fvco_max);
|
|
|
|
return hw;
|
|
}
|
|
|
|
static struct clk_hw *xvcu_clk_hw_register_leaf(struct device *dev,
|
|
const char *name,
|
|
const struct clk_parent_data *parent_data,
|
|
u8 num_parents,
|
|
void __iomem *reg)
|
|
{
|
|
u8 mux_flags = CLK_MUX_ROUND_CLOSEST;
|
|
u8 divider_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO |
|
|
CLK_DIVIDER_ROUND_CLOSEST;
|
|
struct clk_hw *mux = NULL;
|
|
struct clk_hw *divider = NULL;
|
|
struct clk_hw *gate = NULL;
|
|
char *name_mux;
|
|
char *name_div;
|
|
int err;
|
|
/* Protect register shared by clocks */
|
|
spinlock_t *lock;
|
|
|
|
lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
|
|
if (!lock)
|
|
return ERR_PTR(-ENOMEM);
|
|
spin_lock_init(lock);
|
|
|
|
name_mux = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_mux");
|
|
if (!name_mux)
|
|
return ERR_PTR(-ENOMEM);
|
|
mux = clk_hw_register_mux_parent_data(dev, name_mux,
|
|
parent_data, num_parents,
|
|
CLK_SET_RATE_PARENT,
|
|
reg, 0, 1, mux_flags, lock);
|
|
if (IS_ERR(mux))
|
|
return mux;
|
|
|
|
name_div = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_div");
|
|
if (!name_div) {
|
|
err = -ENOMEM;
|
|
goto unregister_mux;
|
|
}
|
|
divider = clk_hw_register_divider_parent_hw(dev, name_div, mux,
|
|
CLK_SET_RATE_PARENT,
|
|
reg, 4, 6, divider_flags,
|
|
lock);
|
|
if (IS_ERR(divider)) {
|
|
err = PTR_ERR(divider);
|
|
goto unregister_mux;
|
|
}
|
|
|
|
gate = clk_hw_register_gate_parent_hw(dev, name, divider,
|
|
CLK_SET_RATE_PARENT, reg, 12, 0,
|
|
lock);
|
|
if (IS_ERR(gate)) {
|
|
err = PTR_ERR(gate);
|
|
goto unregister_divider;
|
|
}
|
|
|
|
return gate;
|
|
|
|
unregister_divider:
|
|
clk_hw_unregister_divider(divider);
|
|
unregister_mux:
|
|
clk_hw_unregister_mux(mux);
|
|
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static void xvcu_clk_hw_unregister_leaf(struct clk_hw *hw)
|
|
{
|
|
struct clk_hw *gate = hw;
|
|
struct clk_hw *divider;
|
|
struct clk_hw *mux;
|
|
|
|
if (!gate)
|
|
return;
|
|
|
|
divider = clk_hw_get_parent(gate);
|
|
clk_hw_unregister_gate(gate);
|
|
if (!divider)
|
|
return;
|
|
|
|
mux = clk_hw_get_parent(divider);
|
|
clk_hw_unregister_mux(mux);
|
|
if (!divider)
|
|
return;
|
|
|
|
clk_hw_unregister_divider(divider);
|
|
}
|
|
|
|
static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
|
|
{
|
|
struct device *dev = xvcu->dev;
|
|
struct clk_parent_data parent_data[2] = { 0 };
|
|
struct clk_hw_onecell_data *data;
|
|
struct clk_hw **hws;
|
|
struct clk_hw *hw;
|
|
void __iomem *reg_base = xvcu->vcu_slcr_ba;
|
|
|
|
data = devm_kzalloc(dev, struct_size(data, hws, CLK_XVCU_NUM_CLOCKS), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
data->num = CLK_XVCU_NUM_CLOCKS;
|
|
hws = data->hws;
|
|
|
|
xvcu->clk_data = data;
|
|
|
|
hw = xvcu_register_pll(dev, reg_base,
|
|
"vcu_pll", __clk_get_name(xvcu->pll_ref),
|
|
CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
xvcu->pll = hw;
|
|
|
|
hw = xvcu_register_pll_post(dev, "vcu_pll_post", xvcu->pll, reg_base);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
xvcu->pll_post = hw;
|
|
|
|
parent_data[0].fw_name = "pll_ref";
|
|
parent_data[1].hw = xvcu->pll_post;
|
|
|
|
hws[CLK_XVCU_ENC_CORE] =
|
|
xvcu_clk_hw_register_leaf(dev, "venc_core_clk",
|
|
parent_data,
|
|
ARRAY_SIZE(parent_data),
|
|
reg_base + VCU_ENC_CORE_CTRL);
|
|
hws[CLK_XVCU_ENC_MCU] =
|
|
xvcu_clk_hw_register_leaf(dev, "venc_mcu_clk",
|
|
parent_data,
|
|
ARRAY_SIZE(parent_data),
|
|
reg_base + VCU_ENC_MCU_CTRL);
|
|
hws[CLK_XVCU_DEC_CORE] =
|
|
xvcu_clk_hw_register_leaf(dev, "vdec_core_clk",
|
|
parent_data,
|
|
ARRAY_SIZE(parent_data),
|
|
reg_base + VCU_DEC_CORE_CTRL);
|
|
hws[CLK_XVCU_DEC_MCU] =
|
|
xvcu_clk_hw_register_leaf(dev, "vdec_mcu_clk",
|
|
parent_data,
|
|
ARRAY_SIZE(parent_data),
|
|
reg_base + VCU_DEC_MCU_CTRL);
|
|
|
|
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
|
|
}
|
|
|
|
static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu)
|
|
{
|
|
struct clk_hw_onecell_data *data = xvcu->clk_data;
|
|
struct clk_hw **hws = data->hws;
|
|
|
|
if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_MCU]))
|
|
xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_MCU]);
|
|
if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_CORE]))
|
|
xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_CORE]);
|
|
if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_MCU]))
|
|
xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]);
|
|
if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE]))
|
|
xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]);
|
|
|
|
clk_hw_unregister_fixed_factor(xvcu->pll_post);
|
|
}
|
|
|
|
/**
|
|
* xvcu_probe - Probe existence of the logicoreIP
|
|
* and initialize PLL
|
|
*
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: Returns 0 on success
|
|
* Negative error code otherwise
|
|
*/
|
|
static int xvcu_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct xvcu_device *xvcu;
|
|
void __iomem *regs;
|
|
int ret;
|
|
|
|
xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
|
|
if (!xvcu)
|
|
return -ENOMEM;
|
|
|
|
xvcu->dev = &pdev->dev;
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!xvcu->vcu_slcr_ba) {
|
|
dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
xvcu->logicore_reg_ba =
|
|
syscon_regmap_lookup_by_compatible("xlnx,vcu-settings");
|
|
if (IS_ERR(xvcu->logicore_reg_ba)) {
|
|
dev_info(&pdev->dev,
|
|
"could not find xlnx,vcu-settings: trying direct register access\n");
|
|
|
|
res = platform_get_resource_byname(pdev,
|
|
IORESOURCE_MEM, "logicore");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "get logicore memory resource failed.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
|
|
if (!regs) {
|
|
dev_err(&pdev->dev, "logicore register mapping failed.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
xvcu->logicore_reg_ba =
|
|
devm_regmap_init_mmio(&pdev->dev, regs,
|
|
&vcu_settings_regmap_config);
|
|
if (IS_ERR(xvcu->logicore_reg_ba)) {
|
|
dev_err(&pdev->dev, "failed to init regmap\n");
|
|
return PTR_ERR(xvcu->logicore_reg_ba);
|
|
}
|
|
}
|
|
|
|
xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
|
|
if (IS_ERR(xvcu->aclk)) {
|
|
dev_err(&pdev->dev, "Could not get aclk clock\n");
|
|
return PTR_ERR(xvcu->aclk);
|
|
}
|
|
|
|
xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
|
|
if (IS_ERR(xvcu->pll_ref)) {
|
|
dev_err(&pdev->dev, "Could not get pll_ref clock\n");
|
|
return PTR_ERR(xvcu->pll_ref);
|
|
}
|
|
|
|
ret = clk_prepare_enable(xvcu->aclk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "aclk clock enable failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Do the Gasket isolation and put the VCU out of reset
|
|
* Bit 0 : Gasket isolation
|
|
* Bit 1 : put VCU out of reset
|
|
*/
|
|
regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);
|
|
|
|
ret = xvcu_register_clock_provider(xvcu);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register clock provider\n");
|
|
goto error_clk_provider;
|
|
}
|
|
|
|
dev_set_drvdata(&pdev->dev, xvcu);
|
|
|
|
return 0;
|
|
|
|
error_clk_provider:
|
|
xvcu_unregister_clock_provider(xvcu);
|
|
clk_disable_unprepare(xvcu->aclk);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* xvcu_remove - Insert gasket isolation
|
|
* and disable the clock
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: Returns 0 on success
|
|
* Negative error code otherwise
|
|
*/
|
|
static int xvcu_remove(struct platform_device *pdev)
|
|
{
|
|
struct xvcu_device *xvcu;
|
|
|
|
xvcu = platform_get_drvdata(pdev);
|
|
if (!xvcu)
|
|
return -ENODEV;
|
|
|
|
xvcu_unregister_clock_provider(xvcu);
|
|
|
|
/* Add the Gasket isolation and put the VCU in reset. */
|
|
regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
|
|
|
|
clk_disable_unprepare(xvcu->aclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id xvcu_of_id_table[] = {
|
|
{ .compatible = "xlnx,vcu" },
|
|
{ .compatible = "xlnx,vcu-logicoreip-1.0" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xvcu_of_id_table);
|
|
|
|
static struct platform_driver xvcu_driver = {
|
|
.driver = {
|
|
.name = "xilinx-vcu",
|
|
.of_match_table = xvcu_of_id_table,
|
|
},
|
|
.probe = xvcu_probe,
|
|
.remove = xvcu_remove,
|
|
};
|
|
|
|
module_platform_driver(xvcu_driver);
|
|
|
|
MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>");
|
|
MODULE_DESCRIPTION("Xilinx VCU init Driver");
|
|
MODULE_LICENSE("GPL v2");
|