mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
90d50b8d85
It's been reported that DSI host driver's detach can be called without the attach ever happening: https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/ After reading the code, I think this is what happens: We have a DSI host defined in the device tree and a DSI peripheral under that host (i.e. an i2c device using the DSI as data bus doesn't exhibit this behavior). The host driver calls mipi_dsi_host_register(), which causes (via a few functions) mipi_dsi_device_add() to be called for the DSI peripheral. So now we have a DSI device under the host, but attach hasn't been called. Normally the probing of the devices continues, and eventually the DSI peripheral's driver will call mipi_dsi_attach(), attaching the peripheral. However, if the host driver's probe encounters an error after calling mipi_dsi_host_register(), and before the peripheral has called mipi_dsi_attach(), the host driver will do cleanups and return an error from its probe function. The cleanups include calling mipi_dsi_host_unregister(). mipi_dsi_host_unregister() will call two functions for all its DSI peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister(). The latter makes sense, as the device exists, but the former may be wrong as attach has not necessarily been done. To fix this, track the attached state of the peripheral, and only detach from mipi_dsi_host_unregister() if the peripheral was attached. Note that I have only tested this with a board with an i2c DSI peripheral, not with a "pure" DSI peripheral. However, slightly related, the unregister machinery still seems broken. E.g. if the DSI host driver is unbound, it'll detach and unregister the DSI peripherals. After that, when the DSI peripheral driver unbound it'll call detach either directly or using the devm variant, leading to a crash. And probably the driver will crash if it happens, for some reason, to try to send a message via the DSI bus. But that's another topic. Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com
1364 lines
33 KiB
C
1364 lines
33 KiB
C
/*
|
|
* MIPI DSI Bus
|
|
*
|
|
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
|
|
* Andrzej Hajda <a.hajda@samsung.com>
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
|
|
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
|
|
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
|
|
* USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <drm/display/drm_dsc.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
/**
|
|
* DOC: dsi helpers
|
|
*
|
|
* These functions contain some common logic and helpers to deal with MIPI DSI
|
|
* peripherals.
|
|
*
|
|
* Helpers are provided for a number of standard MIPI DSI command as well as a
|
|
* subset of the MIPI DCS command set.
|
|
*/
|
|
|
|
static int mipi_dsi_device_match(struct device *dev, struct device_driver *drv)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
/* attempt OF style match */
|
|
if (of_driver_match_device(dev, drv))
|
|
return 1;
|
|
|
|
/* compare DSI device and driver names */
|
|
if (!strcmp(dsi->name, drv->name))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mipi_dsi_uevent(const struct device *dev, struct kobj_uevent_env *env)
|
|
{
|
|
const struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
int err;
|
|
|
|
err = of_device_uevent_modalias(dev, env);
|
|
if (err != -ENODEV)
|
|
return err;
|
|
|
|
add_uevent_var(env, "MODALIAS=%s%s", MIPI_DSI_MODULE_PREFIX,
|
|
dsi->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops mipi_dsi_device_pm_ops = {
|
|
.runtime_suspend = pm_generic_runtime_suspend,
|
|
.runtime_resume = pm_generic_runtime_resume,
|
|
.suspend = pm_generic_suspend,
|
|
.resume = pm_generic_resume,
|
|
.freeze = pm_generic_freeze,
|
|
.thaw = pm_generic_thaw,
|
|
.poweroff = pm_generic_poweroff,
|
|
.restore = pm_generic_restore,
|
|
};
|
|
|
|
static struct bus_type mipi_dsi_bus_type = {
|
|
.name = "mipi-dsi",
|
|
.match = mipi_dsi_device_match,
|
|
.uevent = mipi_dsi_uevent,
|
|
.pm = &mipi_dsi_device_pm_ops,
|
|
};
|
|
|
|
/**
|
|
* of_find_mipi_dsi_device_by_node() - find the MIPI DSI device matching a
|
|
* device tree node
|
|
* @np: device tree node
|
|
*
|
|
* Return: A pointer to the MIPI DSI device corresponding to @np or NULL if no
|
|
* such device exists (or has not been registered yet).
|
|
*/
|
|
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np)
|
|
{
|
|
struct device *dev;
|
|
|
|
dev = bus_find_device_by_of_node(&mipi_dsi_bus_type, np);
|
|
|
|
return dev ? to_mipi_dsi_device(dev) : NULL;
|
|
}
|
|
EXPORT_SYMBOL(of_find_mipi_dsi_device_by_node);
|
|
|
|
static void mipi_dsi_dev_release(struct device *dev)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
of_node_put(dev->of_node);
|
|
kfree(dsi);
|
|
}
|
|
|
|
static const struct device_type mipi_dsi_device_type = {
|
|
.release = mipi_dsi_dev_release,
|
|
};
|
|
|
|
static struct mipi_dsi_device *mipi_dsi_device_alloc(struct mipi_dsi_host *host)
|
|
{
|
|
struct mipi_dsi_device *dsi;
|
|
|
|
dsi = kzalloc(sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
dsi->host = host;
|
|
dsi->dev.bus = &mipi_dsi_bus_type;
|
|
dsi->dev.parent = host->dev;
|
|
dsi->dev.type = &mipi_dsi_device_type;
|
|
|
|
device_initialize(&dsi->dev);
|
|
|
|
return dsi;
|
|
}
|
|
|
|
static int mipi_dsi_device_add(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct mipi_dsi_host *host = dsi->host;
|
|
|
|
dev_set_name(&dsi->dev, "%s.%d", dev_name(host->dev), dsi->channel);
|
|
|
|
return device_add(&dsi->dev);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static struct mipi_dsi_device *
|
|
of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node)
|
|
{
|
|
struct mipi_dsi_device_info info = { };
|
|
int ret;
|
|
u32 reg;
|
|
|
|
if (of_alias_from_compatible(node, info.type, sizeof(info.type)) < 0) {
|
|
drm_err(host, "modalias failure on %pOF\n", node);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "reg", ®);
|
|
if (ret) {
|
|
drm_err(host, "device node %pOF has no valid reg property: %d\n",
|
|
node, ret);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
info.channel = reg;
|
|
info.node = of_node_get(node);
|
|
|
|
return mipi_dsi_device_register_full(host, &info);
|
|
}
|
|
#else
|
|
static struct mipi_dsi_device *
|
|
of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node)
|
|
{
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* mipi_dsi_device_register_full - create a MIPI DSI device
|
|
* @host: DSI host to which this device is connected
|
|
* @info: pointer to template containing DSI device information
|
|
*
|
|
* Create a MIPI DSI device by using the device information provided by
|
|
* mipi_dsi_device_info template
|
|
*
|
|
* Returns:
|
|
* A pointer to the newly created MIPI DSI device, or, a pointer encoded
|
|
* with an error
|
|
*/
|
|
struct mipi_dsi_device *
|
|
mipi_dsi_device_register_full(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_device_info *info)
|
|
{
|
|
struct mipi_dsi_device *dsi;
|
|
int ret;
|
|
|
|
if (!info) {
|
|
drm_err(host, "invalid mipi_dsi_device_info pointer\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
if (info->channel > 3) {
|
|
drm_err(host, "invalid virtual channel: %u\n", info->channel);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
dsi = mipi_dsi_device_alloc(host);
|
|
if (IS_ERR(dsi)) {
|
|
drm_err(host, "failed to allocate DSI device %ld\n",
|
|
PTR_ERR(dsi));
|
|
return dsi;
|
|
}
|
|
|
|
device_set_node(&dsi->dev, of_fwnode_handle(info->node));
|
|
dsi->channel = info->channel;
|
|
strscpy(dsi->name, info->type, sizeof(dsi->name));
|
|
|
|
ret = mipi_dsi_device_add(dsi);
|
|
if (ret) {
|
|
drm_err(host, "failed to add DSI device %d\n", ret);
|
|
kfree(dsi);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return dsi;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_device_register_full);
|
|
|
|
/**
|
|
* mipi_dsi_device_unregister - unregister MIPI DSI device
|
|
* @dsi: DSI peripheral device
|
|
*/
|
|
void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi)
|
|
{
|
|
device_unregister(&dsi->dev);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_device_unregister);
|
|
|
|
static void devm_mipi_dsi_device_unregister(void *arg)
|
|
{
|
|
struct mipi_dsi_device *dsi = arg;
|
|
|
|
mipi_dsi_device_unregister(dsi);
|
|
}
|
|
|
|
/**
|
|
* devm_mipi_dsi_device_register_full - create a managed MIPI DSI device
|
|
* @dev: device to tie the MIPI-DSI device lifetime to
|
|
* @host: DSI host to which this device is connected
|
|
* @info: pointer to template containing DSI device information
|
|
*
|
|
* Create a MIPI DSI device by using the device information provided by
|
|
* mipi_dsi_device_info template
|
|
*
|
|
* This is the managed version of mipi_dsi_device_register_full() which
|
|
* automatically calls mipi_dsi_device_unregister() when @dev is
|
|
* unbound.
|
|
*
|
|
* Returns:
|
|
* A pointer to the newly created MIPI DSI device, or, a pointer encoded
|
|
* with an error
|
|
*/
|
|
struct mipi_dsi_device *
|
|
devm_mipi_dsi_device_register_full(struct device *dev,
|
|
struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_device_info *info)
|
|
{
|
|
struct mipi_dsi_device *dsi;
|
|
int ret;
|
|
|
|
dsi = mipi_dsi_device_register_full(host, info);
|
|
if (IS_ERR(dsi))
|
|
return dsi;
|
|
|
|
ret = devm_add_action_or_reset(dev,
|
|
devm_mipi_dsi_device_unregister,
|
|
dsi);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return dsi;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_mipi_dsi_device_register_full);
|
|
|
|
static DEFINE_MUTEX(host_lock);
|
|
static LIST_HEAD(host_list);
|
|
|
|
/**
|
|
* of_find_mipi_dsi_host_by_node() - find the MIPI DSI host matching a
|
|
* device tree node
|
|
* @node: device tree node
|
|
*
|
|
* Returns:
|
|
* A pointer to the MIPI DSI host corresponding to @node or NULL if no
|
|
* such device exists (or has not been registered yet).
|
|
*/
|
|
struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node)
|
|
{
|
|
struct mipi_dsi_host *host;
|
|
|
|
mutex_lock(&host_lock);
|
|
|
|
list_for_each_entry(host, &host_list, list) {
|
|
if (host->dev->of_node == node) {
|
|
mutex_unlock(&host_lock);
|
|
return host;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&host_lock);
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(of_find_mipi_dsi_host_by_node);
|
|
|
|
int mipi_dsi_host_register(struct mipi_dsi_host *host)
|
|
{
|
|
struct device_node *node;
|
|
|
|
for_each_available_child_of_node(host->dev->of_node, node) {
|
|
/* skip nodes without reg property */
|
|
if (!of_property_present(node, "reg"))
|
|
continue;
|
|
of_mipi_dsi_device_add(host, node);
|
|
}
|
|
|
|
mutex_lock(&host_lock);
|
|
list_add_tail(&host->list, &host_list);
|
|
mutex_unlock(&host_lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_host_register);
|
|
|
|
static int mipi_dsi_remove_device_fn(struct device *dev, void *priv)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
if (dsi->attached)
|
|
mipi_dsi_detach(dsi);
|
|
mipi_dsi_device_unregister(dsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void mipi_dsi_host_unregister(struct mipi_dsi_host *host)
|
|
{
|
|
device_for_each_child(host->dev, NULL, mipi_dsi_remove_device_fn);
|
|
|
|
mutex_lock(&host_lock);
|
|
list_del_init(&host->list);
|
|
mutex_unlock(&host_lock);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_host_unregister);
|
|
|
|
/**
|
|
* mipi_dsi_attach - attach a DSI device to its DSI host
|
|
* @dsi: DSI peripheral
|
|
*/
|
|
int mipi_dsi_attach(struct mipi_dsi_device *dsi)
|
|
{
|
|
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
|
|
int ret;
|
|
|
|
if (!ops || !ops->attach)
|
|
return -ENOSYS;
|
|
|
|
ret = ops->attach(dsi->host, dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dsi->attached = true;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_attach);
|
|
|
|
/**
|
|
* mipi_dsi_detach - detach a DSI device from its DSI host
|
|
* @dsi: DSI peripheral
|
|
*/
|
|
int mipi_dsi_detach(struct mipi_dsi_device *dsi)
|
|
{
|
|
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
|
|
|
|
if (WARN_ON(!dsi->attached))
|
|
return -EINVAL;
|
|
|
|
if (!ops || !ops->detach)
|
|
return -ENOSYS;
|
|
|
|
dsi->attached = false;
|
|
|
|
return ops->detach(dsi->host, dsi);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_detach);
|
|
|
|
static void devm_mipi_dsi_detach(void *arg)
|
|
{
|
|
struct mipi_dsi_device *dsi = arg;
|
|
|
|
mipi_dsi_detach(dsi);
|
|
}
|
|
|
|
/**
|
|
* devm_mipi_dsi_attach - Attach a MIPI-DSI device to its DSI Host
|
|
* @dev: device to tie the MIPI-DSI device attachment lifetime to
|
|
* @dsi: DSI peripheral
|
|
*
|
|
* This is the managed version of mipi_dsi_attach() which automatically
|
|
* calls mipi_dsi_detach() when @dev is unbound.
|
|
*
|
|
* Returns:
|
|
* 0 on success, a negative error code on failure.
|
|
*/
|
|
int devm_mipi_dsi_attach(struct device *dev,
|
|
struct mipi_dsi_device *dsi)
|
|
{
|
|
int ret;
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(dev, devm_mipi_dsi_detach, dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_mipi_dsi_attach);
|
|
|
|
static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
|
|
struct mipi_dsi_msg *msg)
|
|
{
|
|
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
|
|
|
|
if (!ops || !ops->transfer)
|
|
return -ENOSYS;
|
|
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
|
|
msg->flags |= MIPI_DSI_MSG_USE_LPM;
|
|
|
|
return ops->transfer(dsi->host, msg);
|
|
}
|
|
|
|
/**
|
|
* mipi_dsi_packet_format_is_short - check if a packet is of the short format
|
|
* @type: MIPI DSI data type of the packet
|
|
*
|
|
* Return: true if the packet for the given data type is a short packet, false
|
|
* otherwise.
|
|
*/
|
|
bool mipi_dsi_packet_format_is_short(u8 type)
|
|
{
|
|
switch (type) {
|
|
case MIPI_DSI_V_SYNC_START:
|
|
case MIPI_DSI_V_SYNC_END:
|
|
case MIPI_DSI_H_SYNC_START:
|
|
case MIPI_DSI_H_SYNC_END:
|
|
case MIPI_DSI_COMPRESSION_MODE:
|
|
case MIPI_DSI_END_OF_TRANSMISSION:
|
|
case MIPI_DSI_COLOR_MODE_OFF:
|
|
case MIPI_DSI_COLOR_MODE_ON:
|
|
case MIPI_DSI_SHUTDOWN_PERIPHERAL:
|
|
case MIPI_DSI_TURN_ON_PERIPHERAL:
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
|
|
case MIPI_DSI_DCS_SHORT_WRITE:
|
|
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
|
|
case MIPI_DSI_DCS_READ:
|
|
case MIPI_DSI_EXECUTE_QUEUE:
|
|
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
|
|
|
|
/**
|
|
* mipi_dsi_packet_format_is_long - check if a packet is of the long format
|
|
* @type: MIPI DSI data type of the packet
|
|
*
|
|
* Return: true if the packet for the given data type is a long packet, false
|
|
* otherwise.
|
|
*/
|
|
bool mipi_dsi_packet_format_is_long(u8 type)
|
|
{
|
|
switch (type) {
|
|
case MIPI_DSI_NULL_PACKET:
|
|
case MIPI_DSI_BLANKING_PACKET:
|
|
case MIPI_DSI_GENERIC_LONG_WRITE:
|
|
case MIPI_DSI_DCS_LONG_WRITE:
|
|
case MIPI_DSI_PICTURE_PARAMETER_SET:
|
|
case MIPI_DSI_COMPRESSED_PIXEL_STREAM:
|
|
case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_30:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_36:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_16:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_18:
|
|
case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
|
|
case MIPI_DSI_PACKED_PIXEL_STREAM_24:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
|
|
|
|
/**
|
|
* mipi_dsi_create_packet - create a packet from a message according to the
|
|
* DSI protocol
|
|
* @packet: pointer to a DSI packet structure
|
|
* @msg: message to translate into a packet
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
if (!packet || !msg)
|
|
return -EINVAL;
|
|
|
|
/* do some minimum sanity checking */
|
|
if (!mipi_dsi_packet_format_is_short(msg->type) &&
|
|
!mipi_dsi_packet_format_is_long(msg->type))
|
|
return -EINVAL;
|
|
|
|
if (msg->channel > 3)
|
|
return -EINVAL;
|
|
|
|
memset(packet, 0, sizeof(*packet));
|
|
packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
|
|
|
|
/* TODO: compute ECC if hardware support is not available */
|
|
|
|
/*
|
|
* Long write packets contain the word count in header bytes 1 and 2.
|
|
* The payload follows the header and is word count bytes long.
|
|
*
|
|
* Short write packets encode up to two parameters in header bytes 1
|
|
* and 2.
|
|
*/
|
|
if (mipi_dsi_packet_format_is_long(msg->type)) {
|
|
packet->header[1] = (msg->tx_len >> 0) & 0xff;
|
|
packet->header[2] = (msg->tx_len >> 8) & 0xff;
|
|
|
|
packet->payload_length = msg->tx_len;
|
|
packet->payload = msg->tx_buf;
|
|
} else {
|
|
const u8 *tx = msg->tx_buf;
|
|
|
|
packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
|
|
packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
|
|
}
|
|
|
|
packet->size = sizeof(packet->header) + packet->payload_length;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_create_packet);
|
|
|
|
/**
|
|
* mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_SHUTDOWN_PERIPHERAL,
|
|
.tx_buf = (u8 [2]) { 0, 0 },
|
|
.tx_len = 2,
|
|
};
|
|
int ret = mipi_dsi_device_transfer(dsi, &msg);
|
|
|
|
return (ret < 0) ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral);
|
|
|
|
/**
|
|
* mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_TURN_ON_PERIPHERAL,
|
|
.tx_buf = (u8 [2]) { 0, 0 },
|
|
.tx_len = 2,
|
|
};
|
|
int ret = mipi_dsi_device_transfer(dsi, &msg);
|
|
|
|
return (ret < 0) ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral);
|
|
|
|
/*
|
|
* mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of
|
|
* the payload in a long packet transmitted from the peripheral back to the
|
|
* host processor
|
|
* @dsi: DSI peripheral device
|
|
* @value: the maximum size of the payload
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
|
|
u16 value)
|
|
{
|
|
u8 tx[2] = { value & 0xff, value >> 8 };
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
|
|
.tx_len = sizeof(tx),
|
|
.tx_buf = tx,
|
|
};
|
|
int ret = mipi_dsi_device_transfer(dsi, &msg);
|
|
|
|
return (ret < 0) ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
|
|
|
|
/**
|
|
* mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
|
|
* @dsi: DSI peripheral device
|
|
* @enable: Whether to enable or disable the DSC
|
|
*
|
|
* Enable or disable Display Stream Compression on the peripheral using the
|
|
* default Picture Parameter Set and VESA DSC 1.1 algorithm.
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
|
|
{
|
|
/* Note: Needs updating for non-default PPS or algorithm */
|
|
u8 tx[2] = { enable << 0, 0 };
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_COMPRESSION_MODE,
|
|
.tx_len = sizeof(tx),
|
|
.tx_buf = tx,
|
|
};
|
|
int ret = mipi_dsi_device_transfer(dsi, &msg);
|
|
|
|
return (ret < 0) ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_compression_mode);
|
|
|
|
/**
|
|
* mipi_dsi_picture_parameter_set() - transmit the DSC PPS to the peripheral
|
|
* @dsi: DSI peripheral device
|
|
* @pps: VESA DSC 1.1 Picture Parameter Set
|
|
*
|
|
* Transmit the VESA DSC 1.1 Picture Parameter Set to the peripheral.
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
|
|
const struct drm_dsc_picture_parameter_set *pps)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_PICTURE_PARAMETER_SET,
|
|
.tx_len = sizeof(*pps),
|
|
.tx_buf = pps,
|
|
};
|
|
int ret = mipi_dsi_device_transfer(dsi, &msg);
|
|
|
|
return (ret < 0) ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_picture_parameter_set);
|
|
|
|
/**
|
|
* mipi_dsi_generic_write() - transmit data using a generic write packet
|
|
* @dsi: DSI peripheral device
|
|
* @payload: buffer containing the payload
|
|
* @size: size of payload buffer
|
|
*
|
|
* This function will automatically choose the right data type depending on
|
|
* the payload length.
|
|
*
|
|
* Return: The number of bytes transmitted on success or a negative error code
|
|
* on failure.
|
|
*/
|
|
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
|
|
size_t size)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.tx_buf = payload,
|
|
.tx_len = size
|
|
};
|
|
|
|
switch (size) {
|
|
case 0:
|
|
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
|
|
break;
|
|
|
|
case 1:
|
|
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
|
|
break;
|
|
|
|
case 2:
|
|
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
|
|
break;
|
|
|
|
default:
|
|
msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
|
|
break;
|
|
}
|
|
|
|
return mipi_dsi_device_transfer(dsi, &msg);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_generic_write);
|
|
|
|
/**
|
|
* mipi_dsi_generic_read() - receive data using a generic read packet
|
|
* @dsi: DSI peripheral device
|
|
* @params: buffer containing the request parameters
|
|
* @num_params: number of request parameters
|
|
* @data: buffer in which to return the received data
|
|
* @size: size of receive buffer
|
|
*
|
|
* This function will automatically choose the right data type depending on
|
|
* the number of parameters passed in.
|
|
*
|
|
* Return: The number of bytes successfully read or a negative error code on
|
|
* failure.
|
|
*/
|
|
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
|
|
size_t num_params, void *data, size_t size)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.tx_len = num_params,
|
|
.tx_buf = params,
|
|
.rx_len = size,
|
|
.rx_buf = data
|
|
};
|
|
|
|
switch (num_params) {
|
|
case 0:
|
|
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
|
|
break;
|
|
|
|
case 1:
|
|
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
|
|
break;
|
|
|
|
case 2:
|
|
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return mipi_dsi_device_transfer(dsi, &msg);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_generic_read);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
|
|
* @dsi: DSI peripheral device
|
|
* @data: buffer containing data to be transmitted
|
|
* @len: size of transmission buffer
|
|
*
|
|
* This function will automatically choose the right data type depending on
|
|
* the command payload length.
|
|
*
|
|
* Return: The number of bytes successfully transmitted or a negative error
|
|
* code on failure.
|
|
*/
|
|
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
|
|
const void *data, size_t len)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.tx_buf = data,
|
|
.tx_len = len
|
|
};
|
|
|
|
switch (len) {
|
|
case 0:
|
|
return -EINVAL;
|
|
|
|
case 1:
|
|
msg.type = MIPI_DSI_DCS_SHORT_WRITE;
|
|
break;
|
|
|
|
case 2:
|
|
msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
|
|
break;
|
|
|
|
default:
|
|
msg.type = MIPI_DSI_DCS_LONG_WRITE;
|
|
break;
|
|
}
|
|
|
|
return mipi_dsi_device_transfer(dsi, &msg);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_write() - send DCS write command
|
|
* @dsi: DSI peripheral device
|
|
* @cmd: DCS command
|
|
* @data: buffer containing the command payload
|
|
* @len: command payload length
|
|
*
|
|
* This function will automatically choose the right data type depending on
|
|
* the command payload length.
|
|
*
|
|
* Return: The number of bytes successfully transmitted or a negative error
|
|
* code on failure.
|
|
*/
|
|
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
|
|
const void *data, size_t len)
|
|
{
|
|
ssize_t err;
|
|
size_t size;
|
|
u8 stack_tx[8];
|
|
u8 *tx;
|
|
|
|
size = 1 + len;
|
|
if (len > ARRAY_SIZE(stack_tx) - 1) {
|
|
tx = kmalloc(size, GFP_KERNEL);
|
|
if (!tx)
|
|
return -ENOMEM;
|
|
} else {
|
|
tx = stack_tx;
|
|
}
|
|
|
|
/* concatenate the DCS command byte and the payload */
|
|
tx[0] = cmd;
|
|
if (data)
|
|
memcpy(&tx[1], data, len);
|
|
|
|
err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
|
|
|
|
if (tx != stack_tx)
|
|
kfree(tx);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_write);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_read() - send DCS read request command
|
|
* @dsi: DSI peripheral device
|
|
* @cmd: DCS command
|
|
* @data: buffer in which to receive data
|
|
* @len: size of receive buffer
|
|
*
|
|
* Return: The number of bytes read or a negative error code on failure.
|
|
*/
|
|
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
|
|
size_t len)
|
|
{
|
|
struct mipi_dsi_msg msg = {
|
|
.channel = dsi->channel,
|
|
.type = MIPI_DSI_DCS_READ,
|
|
.tx_buf = &cmd,
|
|
.tx_len = 1,
|
|
.rx_buf = data,
|
|
.rx_len = len
|
|
};
|
|
|
|
return mipi_dsi_device_transfer(dsi, &msg);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_read);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_nop() - send DCS nop packet
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_nop);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_get_power_mode() - query the display module's current power
|
|
* mode
|
|
* @dsi: DSI peripheral device
|
|
* @mode: return location for the current power mode
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
|
|
sizeof(*mode));
|
|
if (err <= 0) {
|
|
if (err == 0)
|
|
err = -ENODATA;
|
|
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
|
|
* data used by the interface
|
|
* @dsi: DSI peripheral device
|
|
* @format: return location for the pixel format
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
|
|
sizeof(*format));
|
|
if (err <= 0) {
|
|
if (err == 0)
|
|
err = -ENODATA;
|
|
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
|
|
* display module except interface communication
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
|
|
* module
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
|
|
* display device
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_display_on() - start displaying the image data on the
|
|
* display device
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure
|
|
*/
|
|
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_column_address() - define the column extent of the frame
|
|
* memory accessed by the host processor
|
|
* @dsi: DSI peripheral device
|
|
* @start: first column of frame memory
|
|
* @end: last column of frame memory
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
|
|
u16 end)
|
|
{
|
|
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
|
|
sizeof(payload));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_page_address() - define the page extent of the frame
|
|
* memory accessed by the host processor
|
|
* @dsi: DSI peripheral device
|
|
* @start: first page of frame memory
|
|
* @end: last page of frame memory
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
|
|
u16 end)
|
|
{
|
|
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
|
|
sizeof(payload));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
|
|
* output signal on the TE signal line
|
|
* @dsi: DSI peripheral device
|
|
*
|
|
* Return: 0 on success or a negative error code on failure
|
|
*/
|
|
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
|
|
* output signal on the TE signal line.
|
|
* @dsi: DSI peripheral device
|
|
* @mode: the Tearing Effect Output Line mode
|
|
*
|
|
* Return: 0 on success or a negative error code on failure
|
|
*/
|
|
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
|
|
enum mipi_dsi_dcs_tear_mode mode)
|
|
{
|
|
u8 value = mode;
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
|
|
sizeof(value));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
|
|
* data used by the interface
|
|
* @dsi: DSI peripheral device
|
|
* @format: pixel format
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
|
|
sizeof(format));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
|
|
* the Tearing Effect output signal of the display module
|
|
* @dsi: DSI peripheral device
|
|
* @scanline: scanline to use as trigger
|
|
*
|
|
* Return: 0 on success or a negative error code on failure
|
|
*/
|
|
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
|
|
{
|
|
u8 payload[2] = { scanline >> 8, scanline & 0xff };
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE, payload,
|
|
sizeof(payload));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
|
|
* display
|
|
* @dsi: DSI peripheral device
|
|
* @brightness: brightness value
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
|
|
u16 brightness)
|
|
{
|
|
u8 payload[2] = { brightness & 0xff, brightness >> 8 };
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
|
|
payload, sizeof(payload));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
|
|
* of the display
|
|
* @dsi: DSI peripheral device
|
|
* @brightness: brightness value
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
|
|
u16 *brightness)
|
|
{
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
|
|
brightness, sizeof(*brightness));
|
|
if (err <= 0) {
|
|
if (err == 0)
|
|
err = -ENODATA;
|
|
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_set_display_brightness_large() - sets the 16-bit brightness value
|
|
* of the display
|
|
* @dsi: DSI peripheral device
|
|
* @brightness: brightness value
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
|
|
u16 brightness)
|
|
{
|
|
u8 payload[2] = { brightness >> 8, brightness & 0xff };
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
|
|
payload, sizeof(payload));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness_large);
|
|
|
|
/**
|
|
* mipi_dsi_dcs_get_display_brightness_large() - gets the current 16-bit
|
|
* brightness value of the display
|
|
* @dsi: DSI peripheral device
|
|
* @brightness: brightness value
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
|
|
u16 *brightness)
|
|
{
|
|
u8 brightness_be[2];
|
|
ssize_t err;
|
|
|
|
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
|
|
brightness_be, sizeof(brightness_be));
|
|
if (err <= 0) {
|
|
if (err == 0)
|
|
err = -ENODATA;
|
|
|
|
return err;
|
|
}
|
|
|
|
*brightness = (brightness_be[0] << 8) | brightness_be[1];
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness_large);
|
|
|
|
static int mipi_dsi_drv_probe(struct device *dev)
|
|
{
|
|
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
return drv->probe(dsi);
|
|
}
|
|
|
|
static int mipi_dsi_drv_remove(struct device *dev)
|
|
{
|
|
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
drv->remove(dsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mipi_dsi_drv_shutdown(struct device *dev)
|
|
{
|
|
struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
|
|
|
|
drv->shutdown(dsi);
|
|
}
|
|
|
|
/**
|
|
* mipi_dsi_driver_register_full() - register a driver for DSI devices
|
|
* @drv: DSI driver structure
|
|
* @owner: owner module
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
int mipi_dsi_driver_register_full(struct mipi_dsi_driver *drv,
|
|
struct module *owner)
|
|
{
|
|
drv->driver.bus = &mipi_dsi_bus_type;
|
|
drv->driver.owner = owner;
|
|
|
|
if (drv->probe)
|
|
drv->driver.probe = mipi_dsi_drv_probe;
|
|
if (drv->remove)
|
|
drv->driver.remove = mipi_dsi_drv_remove;
|
|
if (drv->shutdown)
|
|
drv->driver.shutdown = mipi_dsi_drv_shutdown;
|
|
|
|
return driver_register(&drv->driver);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_driver_register_full);
|
|
|
|
/**
|
|
* mipi_dsi_driver_unregister() - unregister a driver for DSI devices
|
|
* @drv: DSI driver structure
|
|
*
|
|
* Return: 0 on success or a negative error code on failure.
|
|
*/
|
|
void mipi_dsi_driver_unregister(struct mipi_dsi_driver *drv)
|
|
{
|
|
driver_unregister(&drv->driver);
|
|
}
|
|
EXPORT_SYMBOL(mipi_dsi_driver_unregister);
|
|
|
|
static int __init mipi_dsi_bus_init(void)
|
|
{
|
|
return bus_register(&mipi_dsi_bus_type);
|
|
}
|
|
postcore_initcall(mipi_dsi_bus_init);
|
|
|
|
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
|
|
MODULE_DESCRIPTION("MIPI DSI Bus");
|
|
MODULE_LICENSE("GPL and additional rights");
|