mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 03:55:09 +08:00
1c4db8e828
As rb532_dev3_ctl_res is not used by any platform device, it can be dropped when not used for holding the physical address of the device 3 controller. Also a size of one byte should suffice when ioremapping the physical address mentioned above, as only a single byte is being read from and written to it. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
365 lines
8.2 KiB
C
365 lines
8.2 KiB
C
/*
|
|
* RouterBoard 500 Platform devices
|
|
*
|
|
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/string.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
|
|
#include <asm/mach-rc32434/rc32434.h>
|
|
#include <asm/mach-rc32434/dma.h>
|
|
#include <asm/mach-rc32434/dma_v.h>
|
|
#include <asm/mach-rc32434/eth.h>
|
|
#include <asm/mach-rc32434/rb.h>
|
|
#include <asm/mach-rc32434/integ.h>
|
|
#include <asm/mach-rc32434/gpio.h>
|
|
#include <asm/mach-rc32434/irq.h>
|
|
|
|
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
|
|
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
|
|
|
|
extern unsigned int idt_cpu_freq;
|
|
|
|
static struct mpmc_device dev3;
|
|
|
|
void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev3.lock, flags);
|
|
|
|
dev3.state = (dev3.state | or_mask) & ~nand_mask;
|
|
writeb(dev3.state, dev3.base);
|
|
|
|
spin_unlock_irqrestore(&dev3.lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(set_latch_u5);
|
|
|
|
unsigned char get_latch_u5(void)
|
|
{
|
|
return dev3.state;
|
|
}
|
|
EXPORT_SYMBOL(get_latch_u5);
|
|
|
|
static struct resource korina_dev0_res[] = {
|
|
{
|
|
.name = "korina_regs",
|
|
.start = ETH0_BASE_ADDR,
|
|
.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.name = "korina_rx",
|
|
.start = ETH0_DMA_RX_IRQ,
|
|
.end = ETH0_DMA_RX_IRQ,
|
|
.flags = IORESOURCE_IRQ
|
|
}, {
|
|
.name = "korina_tx",
|
|
.start = ETH0_DMA_TX_IRQ,
|
|
.end = ETH0_DMA_TX_IRQ,
|
|
.flags = IORESOURCE_IRQ
|
|
}, {
|
|
.name = "korina_ovr",
|
|
.start = ETH0_RX_OVR_IRQ,
|
|
.end = ETH0_RX_OVR_IRQ,
|
|
.flags = IORESOURCE_IRQ
|
|
}, {
|
|
.name = "korina_und",
|
|
.start = ETH0_TX_UND_IRQ,
|
|
.end = ETH0_TX_UND_IRQ,
|
|
.flags = IORESOURCE_IRQ
|
|
}, {
|
|
.name = "korina_dma_rx",
|
|
.start = ETH0_RX_DMA_ADDR,
|
|
.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.name = "korina_dma_tx",
|
|
.start = ETH0_TX_DMA_ADDR,
|
|
.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct korina_device korina_dev0_data = {
|
|
.name = "korina0",
|
|
.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
|
|
};
|
|
|
|
static struct platform_device korina_dev0 = {
|
|
.id = -1,
|
|
.name = "korina",
|
|
.dev.driver_data = &korina_dev0_data,
|
|
.resource = korina_dev0_res,
|
|
.num_resources = ARRAY_SIZE(korina_dev0_res),
|
|
};
|
|
|
|
static struct resource cf_slot0_res[] = {
|
|
{
|
|
.name = "cf_membase",
|
|
.flags = IORESOURCE_MEM
|
|
}, {
|
|
.name = "cf_irq",
|
|
.start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
|
|
.end = (8 + 4 * 32 + CF_GPIO_NUM),
|
|
.flags = IORESOURCE_IRQ
|
|
}
|
|
};
|
|
|
|
static struct cf_device cf_slot0_data = {
|
|
.gpio_pin = CF_GPIO_NUM
|
|
};
|
|
|
|
static struct platform_device cf_slot0 = {
|
|
.id = -1,
|
|
.name = "pata-rb532-cf",
|
|
.dev.platform_data = &cf_slot0_data,
|
|
.resource = cf_slot0_res,
|
|
.num_resources = ARRAY_SIZE(cf_slot0_res),
|
|
};
|
|
|
|
/* Resources and device for NAND */
|
|
static int rb532_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(GPIO_RDY);
|
|
}
|
|
|
|
static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
unsigned char orbits, nandbits;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
orbits = (ctrl & NAND_CLE) << 1;
|
|
orbits |= (ctrl & NAND_ALE) >> 1;
|
|
|
|
nandbits = (~ctrl & NAND_CLE) << 1;
|
|
nandbits |= (~ctrl & NAND_ALE) >> 1;
|
|
|
|
set_latch_u5(orbits, nandbits);
|
|
}
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, chip->IO_ADDR_W);
|
|
}
|
|
|
|
static struct resource nand_slot0_res[] = {
|
|
[0] = {
|
|
.name = "nand_membase",
|
|
.flags = IORESOURCE_MEM
|
|
}
|
|
};
|
|
|
|
static struct platform_nand_data rb532_nand_data = {
|
|
.ctrl.dev_ready = rb532_dev_ready,
|
|
.ctrl.cmd_ctrl = rb532_cmd_ctrl,
|
|
};
|
|
|
|
static struct platform_device nand_slot0 = {
|
|
.name = "gen_nand",
|
|
.id = -1,
|
|
.resource = nand_slot0_res,
|
|
.num_resources = ARRAY_SIZE(nand_slot0_res),
|
|
.dev.platform_data = &rb532_nand_data,
|
|
};
|
|
|
|
static struct mtd_partition rb532_partition_info[] = {
|
|
{
|
|
.name = "Routerboard NAND boot",
|
|
.offset = 0,
|
|
.size = 4 * 1024 * 1024,
|
|
}, {
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct platform_device rb532_led = {
|
|
.name = "rb532-led",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct gpio_keys_button rb532_gpio_btn[] = {
|
|
{
|
|
.gpio = 1,
|
|
.code = BTN_0,
|
|
.desc = "S1",
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_platform_data rb532_gpio_btn_data = {
|
|
.buttons = rb532_gpio_btn,
|
|
.nbuttons = ARRAY_SIZE(rb532_gpio_btn),
|
|
};
|
|
|
|
static struct platform_device rb532_button = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rb532_gpio_btn_data,
|
|
}
|
|
};
|
|
|
|
static struct resource rb532_wdt_res[] = {
|
|
{
|
|
.name = "rb532_wdt_res",
|
|
.start = INTEG0_BASE_ADDR,
|
|
.end = INTEG0_BASE_ADDR + sizeof(struct integ),
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device rb532_wdt = {
|
|
.name = "rc32434_wdt",
|
|
.id = -1,
|
|
.resource = rb532_wdt_res,
|
|
.num_resources = ARRAY_SIZE(rb532_wdt_res),
|
|
};
|
|
|
|
static struct plat_serial8250_port rb532_uart_res[] = {
|
|
{
|
|
.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
|
|
.irq = UART0_IRQ,
|
|
.regshift = 2,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
},
|
|
{
|
|
.flags = 0,
|
|
}
|
|
};
|
|
|
|
static struct platform_device rb532_uart = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM,
|
|
.dev.platform_data = &rb532_uart_res,
|
|
};
|
|
|
|
static struct platform_device *rb532_devs[] = {
|
|
&korina_dev0,
|
|
&nand_slot0,
|
|
&cf_slot0,
|
|
&rb532_led,
|
|
&rb532_button,
|
|
&rb532_uart,
|
|
&rb532_wdt
|
|
};
|
|
|
|
static void __init parse_mac_addr(char *macstr)
|
|
{
|
|
int i, j;
|
|
unsigned char result, value;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
result = 0;
|
|
|
|
if (i != 5 && *(macstr + 2) != ':')
|
|
return;
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if (isxdigit(*macstr)
|
|
&& (value =
|
|
isdigit(*macstr) ? *macstr -
|
|
'0' : toupper(*macstr) - 'A' + 10) < 16) {
|
|
result = result * 16 + value;
|
|
macstr++;
|
|
} else
|
|
return;
|
|
}
|
|
|
|
macstr++;
|
|
korina_dev0_data.mac[i] = result;
|
|
}
|
|
}
|
|
|
|
|
|
/* NAND definitions */
|
|
#define NAND_CHIP_DELAY 25
|
|
|
|
static void __init rb532_nand_setup(void)
|
|
{
|
|
switch (mips_machtype) {
|
|
case MACH_MIKROTIK_RB532A:
|
|
set_latch_u5(LO_FOFF | LO_CEX,
|
|
LO_ULED | LO_ALE | LO_CLE | LO_WPX);
|
|
break;
|
|
default:
|
|
set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
|
|
LO_ULED | LO_ALE | LO_CLE);
|
|
break;
|
|
}
|
|
|
|
/* Setup NAND specific settings */
|
|
rb532_nand_data.chip.nr_chips = 1;
|
|
rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
|
|
rb532_nand_data.chip.partitions = rb532_partition_info;
|
|
rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
|
|
rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
|
|
}
|
|
|
|
|
|
static int __init plat_setup_devices(void)
|
|
{
|
|
/* Look for the CF card reader */
|
|
if (!readl(IDT434_REG_BASE + DEV1MASK))
|
|
rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */
|
|
else {
|
|
cf_slot0_res[0].start =
|
|
readl(IDT434_REG_BASE + DEV1BASE);
|
|
cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
|
|
}
|
|
|
|
/* Read the NAND resources from the device controller */
|
|
nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
|
|
nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
|
|
|
|
/* Read and map device controller 3 */
|
|
dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
|
|
|
|
if (!dev3.base) {
|
|
printk(KERN_ERR "rb532: cannot remap device controller 3\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Initialise the NAND device */
|
|
rb532_nand_setup();
|
|
|
|
/* set the uart clock to the current cpu frequency */
|
|
rb532_uart_res[0].uartclk = idt_cpu_freq;
|
|
|
|
return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
|
|
}
|
|
|
|
static int __init setup_kmac(char *s)
|
|
{
|
|
printk(KERN_INFO "korina mac = %s\n", s);
|
|
parse_mac_addr(s);
|
|
return 0;
|
|
}
|
|
|
|
__setup("kmac=", setup_kmac);
|
|
|
|
arch_initcall(plat_setup_devices);
|