Go to file
Andrey Skvortsov 379f56c24e mmc: core: Wait for command setting 'Power Off Notification' bit to complete
SD card is allowed to signal busy on DAT0 up to 1s after the
CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host
waits until busy of CMD49 is released and only then polls Power
Management Status register up to 1s until the card indicates ready to
power off.

Without waiting for busy before polling status register sometimes card
becomes unresponsive and system fails to suspend:

  [  205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  [  206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command
  [  206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed
  [  206.421347] mmc0: error -110 reading status reg of PM func
  [  206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110
  [  206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110
  [  206.437064] PM: Some devices failed to suspend, or early wake event detected

Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 2c5d427690 ("mmc: core: Add support for Power Off Notification for SD cards")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-24 15:37:13 +01:00
arch bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
block bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
certs certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty 2022-01-23 00:08:44 +09:00
crypto lib/crypto: add prompts back to crypto libraries 2022-01-18 13:03:55 +01:00
Documentation Merge branch 'akpm' (patches from Andrew) 2022-01-22 11:28:23 +02:00
drivers mmc: core: Wait for command setting 'Power Off Notification' bit to complete 2022-01-24 15:37:13 +01:00
fs bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
include bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
init lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() 2022-01-22 08:33:37 +02:00
ipc proc: remove PDE_DATA() completely 2022-01-22 08:33:37 +02:00
kernel ftrace: Fix s390 breakage from sorting mcount tables 2022-01-23 08:07:02 +02:00
lib bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
net bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
samples Merge branch 'akpm' (patches from Andrew) 2022-01-20 10:41:01 +02:00
scripts Devicetree fixes for v5.17, take 1: 2022-01-22 09:52:17 +02:00
security fs.idmapped.v5.17 2022-01-11 14:26:55 -08:00
sound proc: remove PDE_DATA() completely 2022-01-22 08:33:37 +02:00
tools perf tools changes for v5.17: 2nd batch 2022-01-23 08:14:21 +02:00
usr usr/include/Makefile: add linux/nfc.h to the compile-test coverage 2022-01-22 21:48:45 +09:00
virt Generic: 2022-01-22 09:40:01 +02:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap RISCV: 2022-01-16 16:15:14 +02:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance 2021-12-08 10:09:40 -07:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
Makefile Linux 5.17-rc1 2022-01-23 10:12:53 +02:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.