mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 10:14:23 +08:00
cbda94e039
These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR wpJyM+Gm+Fk= =u/FI -----END PGP SIGNATURE----- Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
1076 lines
27 KiB
C
1076 lines
27 KiB
C
/*
|
|
* linux/arch/arm/common/gic.c
|
|
*
|
|
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Interrupt architecture for the GIC:
|
|
*
|
|
* o There is one Interrupt Distributor, which receives interrupts
|
|
* from system devices and sends them to the Interrupt Controllers.
|
|
*
|
|
* o There is one CPU Interface per CPU, which sends interrupts sent
|
|
* by the Distributor, and interrupts generated locally, to the
|
|
* associated CPU. The base address of the CPU interface is usually
|
|
* aliased so that the same address points to different chips depending
|
|
* on the CPU it is accessed from.
|
|
*
|
|
* Note that IRQs 0-31 are special - they are local to each CPU.
|
|
* As such, the enable set/clear, pending set/clear and active bit
|
|
* registers are banked per-cpu for these sources.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/exception.h>
|
|
#include <asm/smp_plat.h>
|
|
|
|
#include "irqchip.h"
|
|
|
|
union gic_base {
|
|
void __iomem *common_base;
|
|
void __percpu * __iomem *percpu_base;
|
|
};
|
|
|
|
struct gic_chip_data {
|
|
union gic_base dist_base;
|
|
union gic_base cpu_base;
|
|
#ifdef CONFIG_CPU_PM
|
|
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
|
|
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
|
|
u32 __percpu *saved_ppi_enable;
|
|
u32 __percpu *saved_ppi_conf;
|
|
#endif
|
|
struct irq_domain *domain;
|
|
unsigned int gic_irqs;
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
void __iomem *(*get_base)(union gic_base *);
|
|
#endif
|
|
};
|
|
|
|
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
|
|
|
|
/*
|
|
* The GIC mapping of CPU interfaces does not necessarily match
|
|
* the logical CPU numbering. Let's use a mapping as returned
|
|
* by the GIC itself.
|
|
*/
|
|
#define NR_GIC_CPU_IF 8
|
|
static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
|
|
|
|
/*
|
|
* Supported arch specific GIC irq extension.
|
|
* Default make them NULL.
|
|
*/
|
|
struct irq_chip gic_arch_extn = {
|
|
.irq_eoi = NULL,
|
|
.irq_mask = NULL,
|
|
.irq_unmask = NULL,
|
|
.irq_retrigger = NULL,
|
|
.irq_set_type = NULL,
|
|
.irq_set_wake = NULL,
|
|
};
|
|
|
|
#ifndef MAX_GIC_NR
|
|
#define MAX_GIC_NR 1
|
|
#endif
|
|
|
|
static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
|
|
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
static void __iomem *gic_get_percpu_base(union gic_base *base)
|
|
{
|
|
return *__this_cpu_ptr(base->percpu_base);
|
|
}
|
|
|
|
static void __iomem *gic_get_common_base(union gic_base *base)
|
|
{
|
|
return base->common_base;
|
|
}
|
|
|
|
static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->dist_base);
|
|
}
|
|
|
|
static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->cpu_base);
|
|
}
|
|
|
|
static inline void gic_set_base_accessor(struct gic_chip_data *data,
|
|
void __iomem *(*f)(union gic_base *))
|
|
{
|
|
data->get_base = f;
|
|
}
|
|
#else
|
|
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
|
|
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
|
|
#define gic_set_base_accessor(d, f)
|
|
#endif
|
|
|
|
static inline void __iomem *gic_dist_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_dist_base(gic_data);
|
|
}
|
|
|
|
static inline void __iomem *gic_cpu_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_cpu_base(gic_data);
|
|
}
|
|
|
|
static inline unsigned int gic_irq(struct irq_data *d)
|
|
{
|
|
return d->hwirq;
|
|
}
|
|
|
|
/*
|
|
* Routines to acknowledge, disable and enable interrupts
|
|
*/
|
|
static void gic_mask_irq(struct irq_data *d)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
|
|
if (gic_arch_extn.irq_mask)
|
|
gic_arch_extn.irq_mask(d);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
}
|
|
|
|
static void gic_unmask_irq(struct irq_data *d)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
if (gic_arch_extn.irq_unmask)
|
|
gic_arch_extn.irq_unmask(d);
|
|
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
}
|
|
|
|
static void gic_eoi_irq(struct irq_data *d)
|
|
{
|
|
if (gic_arch_extn.irq_eoi) {
|
|
raw_spin_lock(&irq_controller_lock);
|
|
gic_arch_extn.irq_eoi(d);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
}
|
|
|
|
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
|
|
}
|
|
|
|
static int gic_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
void __iomem *base = gic_dist_base(d);
|
|
unsigned int gicirq = gic_irq(d);
|
|
u32 enablemask = 1 << (gicirq % 32);
|
|
u32 enableoff = (gicirq / 32) * 4;
|
|
u32 confmask = 0x2 << ((gicirq % 16) * 2);
|
|
u32 confoff = (gicirq / 16) * 4;
|
|
bool enabled = false;
|
|
u32 val;
|
|
|
|
/* Interrupt configuration for SGIs can't be changed */
|
|
if (gicirq < 16)
|
|
return -EINVAL;
|
|
|
|
if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
|
|
if (gic_arch_extn.irq_set_type)
|
|
gic_arch_extn.irq_set_type(d, type);
|
|
|
|
val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
|
|
if (type == IRQ_TYPE_LEVEL_HIGH)
|
|
val &= ~confmask;
|
|
else if (type == IRQ_TYPE_EDGE_RISING)
|
|
val |= confmask;
|
|
|
|
/*
|
|
* As recommended by the spec, disable the interrupt before changing
|
|
* the configuration
|
|
*/
|
|
if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
|
|
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
|
|
enabled = true;
|
|
}
|
|
|
|
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
|
|
|
|
if (enabled)
|
|
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
|
|
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gic_retrigger(struct irq_data *d)
|
|
{
|
|
if (gic_arch_extn.irq_retrigger)
|
|
return gic_arch_extn.irq_retrigger(d);
|
|
|
|
/* the genirq layer expects 0 if we can't retrigger in hardware */
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
|
|
bool force)
|
|
{
|
|
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
|
|
unsigned int shift = (gic_irq(d) % 4) * 8;
|
|
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
|
|
u32 val, mask, bit;
|
|
|
|
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
mask = 0xff << shift;
|
|
bit = gic_cpu_map[cpu] << shift;
|
|
val = readl_relaxed(reg) & ~mask;
|
|
writel_relaxed(val | bit, reg);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
return IRQ_SET_MASK_OK;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static int gic_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
int ret = -ENXIO;
|
|
|
|
if (gic_arch_extn.irq_set_wake)
|
|
ret = gic_arch_extn.irq_set_wake(d, on);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#else
|
|
#define gic_set_wake NULL
|
|
#endif
|
|
|
|
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
|
|
{
|
|
u32 irqstat, irqnr;
|
|
struct gic_chip_data *gic = &gic_data[0];
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
|
|
do {
|
|
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
|
|
irqnr = irqstat & ~0x1c00;
|
|
|
|
if (likely(irqnr > 15 && irqnr < 1021)) {
|
|
irqnr = irq_find_mapping(gic->domain, irqnr);
|
|
handle_IRQ(irqnr, regs);
|
|
continue;
|
|
}
|
|
if (irqnr < 16) {
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
|
|
#ifdef CONFIG_SMP
|
|
handle_IPI(irqnr, regs);
|
|
#endif
|
|
continue;
|
|
}
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct gic_chip_data *chip_data = irq_get_handler_data(irq);
|
|
struct irq_chip *chip = irq_get_chip(irq);
|
|
unsigned int cascade_irq, gic_irq;
|
|
unsigned long status;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
gic_irq = (status & 0x3ff);
|
|
if (gic_irq == 1023)
|
|
goto out;
|
|
|
|
cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
|
|
if (unlikely(gic_irq < 32 || gic_irq > 1020))
|
|
handle_bad_irq(cascade_irq, desc);
|
|
else
|
|
generic_handle_irq(cascade_irq);
|
|
|
|
out:
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static struct irq_chip gic_chip = {
|
|
.name = "GIC",
|
|
.irq_mask = gic_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
.irq_retrigger = gic_retrigger,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = gic_set_affinity,
|
|
#endif
|
|
.irq_set_wake = gic_set_wake,
|
|
};
|
|
|
|
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|
{
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0)
|
|
BUG();
|
|
irq_set_chained_handler(irq, gic_handle_cascade_irq);
|
|
}
|
|
|
|
static u8 gic_get_cpumask(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
u32 mask, i;
|
|
|
|
for (i = mask = 0; i < 32; i += 4) {
|
|
mask = readl_relaxed(base + GIC_DIST_TARGET + i);
|
|
mask |= mask >> 16;
|
|
mask |= mask >> 8;
|
|
if (mask)
|
|
break;
|
|
}
|
|
|
|
if (!mask)
|
|
pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void __init gic_dist_init(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int i;
|
|
u32 cpumask;
|
|
unsigned int gic_irqs = gic->gic_irqs;
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
|
|
writel_relaxed(0, base + GIC_DIST_CTRL);
|
|
|
|
/*
|
|
* Set all global interrupts to be level triggered, active low.
|
|
*/
|
|
for (i = 32; i < gic_irqs; i += 16)
|
|
writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
|
|
|
|
/*
|
|
* Set all global interrupts to this CPU only.
|
|
*/
|
|
cpumask = gic_get_cpumask(gic);
|
|
cpumask |= cpumask << 8;
|
|
cpumask |= cpumask << 16;
|
|
for (i = 32; i < gic_irqs; i += 4)
|
|
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
|
|
|
/*
|
|
* Set priority on all global interrupts.
|
|
*/
|
|
for (i = 32; i < gic_irqs; i += 4)
|
|
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
|
|
|
|
/*
|
|
* Disable all interrupts. Leave the PPI and SGIs alone
|
|
* as these enables are banked registers.
|
|
*/
|
|
for (i = 32; i < gic_irqs; i += 32)
|
|
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
|
|
|
|
writel_relaxed(1, base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_init(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *dist_base = gic_data_dist_base(gic);
|
|
void __iomem *base = gic_data_cpu_base(gic);
|
|
unsigned int cpu_mask, cpu = smp_processor_id();
|
|
int i;
|
|
|
|
/*
|
|
* Get what the GIC says our CPU mask is.
|
|
*/
|
|
BUG_ON(cpu >= NR_GIC_CPU_IF);
|
|
cpu_mask = gic_get_cpumask(gic);
|
|
gic_cpu_map[cpu] = cpu_mask;
|
|
|
|
/*
|
|
* Clear our mask from the other map entries in case they're
|
|
* still undefined.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
if (i != cpu)
|
|
gic_cpu_map[i] &= ~cpu_mask;
|
|
|
|
/*
|
|
* Deal with the banked PPI and SGI interrupts - disable all
|
|
* PPI interrupts, ensure all SGI interrupts are enabled.
|
|
*/
|
|
writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
|
|
writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
|
|
|
|
/*
|
|
* Set priority on PPI and SGI interrupts
|
|
*/
|
|
for (i = 0; i < 32; i += 4)
|
|
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
|
|
|
|
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
|
|
writel_relaxed(1, base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
void gic_cpu_if_down(void)
|
|
{
|
|
void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
|
|
writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_PM
|
|
/*
|
|
* Saves the GIC distributor registers during suspend or idle. Must be called
|
|
* with interrupts disabled but before powering down the GIC. After calling
|
|
* this function, no interrupts will be delivered by the GIC, and another
|
|
* platform-specific wakeup source must be enabled.
|
|
*/
|
|
static void gic_dist_save(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
void __iomem *dist_base;
|
|
int i;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
gic_data[gic_nr].saved_spi_conf[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
gic_data[gic_nr].saved_spi_target[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic_data[gic_nr].saved_spi_enable[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
/*
|
|
* Restores the GIC distributor registers during resume or when coming out of
|
|
* idle. Must be called before enabling interrupts. If a level interrupt
|
|
* that occured while the GIC was suspended is still present, it will be
|
|
* handled normally, but any edge interrupts that occured will not be seen by
|
|
* the GIC and need to be handled by the platform-specific wakeup source.
|
|
*/
|
|
static void gic_dist_restore(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
unsigned int i;
|
|
void __iomem *dist_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
writel_relaxed(0, dist_base + GIC_DIST_CTRL);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
|
|
dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(0xa0a0a0a0,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
|
|
dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
|
|
dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
writel_relaxed(1, dist_base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_save(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
}
|
|
|
|
static void gic_cpu_restore(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
|
|
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
|
|
writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_GIC_NR; i++) {
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
/* Skip over unused GICs */
|
|
if (!gic_data[i].get_base)
|
|
continue;
|
|
#endif
|
|
switch (cmd) {
|
|
case CPU_PM_ENTER:
|
|
gic_cpu_save(i);
|
|
break;
|
|
case CPU_PM_ENTER_FAILED:
|
|
case CPU_PM_EXIT:
|
|
gic_cpu_restore(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER:
|
|
gic_dist_save(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER_FAILED:
|
|
case CPU_CLUSTER_PM_EXIT:
|
|
gic_dist_restore(i);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block gic_notifier_block = {
|
|
.notifier_call = gic_notifier,
|
|
};
|
|
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_enable);
|
|
|
|
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_conf);
|
|
|
|
if (gic == &gic_data[0])
|
|
cpu_pm_register_notifier(&gic_notifier_block);
|
|
}
|
|
#else
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
|
|
{
|
|
int cpu;
|
|
unsigned long flags, map = 0;
|
|
|
|
raw_spin_lock_irqsave(&irq_controller_lock, flags);
|
|
|
|
/* Convert our logical CPU mask into a physical one. */
|
|
for_each_cpu(cpu, mask)
|
|
map |= gic_cpu_map[cpu];
|
|
|
|
/*
|
|
* Ensure that stores to Normal memory are visible to the
|
|
* other CPUs before they observe us issuing the IPI.
|
|
*/
|
|
dmb(ishst);
|
|
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
|
|
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BL_SWITCHER
|
|
/*
|
|
* gic_send_sgi - send a SGI directly to given CPU interface number
|
|
*
|
|
* cpu_id: the ID for the destination CPU interface
|
|
* irq: the IPI number to send a SGI for
|
|
*/
|
|
void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
|
|
{
|
|
BUG_ON(cpu_id >= NR_GIC_CPU_IF);
|
|
cpu_id = 1 << cpu_id;
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
}
|
|
|
|
/*
|
|
* gic_get_cpu_id - get the CPU interface ID for the specified CPU
|
|
*
|
|
* @cpu: the logical CPU number to get the GIC ID for.
|
|
*
|
|
* Return the CPU interface ID for the given logical CPU number,
|
|
* or -1 if the CPU number is too large or the interface ID is
|
|
* unknown (more than one bit set).
|
|
*/
|
|
int gic_get_cpu_id(unsigned int cpu)
|
|
{
|
|
unsigned int cpu_bit;
|
|
|
|
if (cpu >= NR_GIC_CPU_IF)
|
|
return -1;
|
|
cpu_bit = gic_cpu_map[cpu];
|
|
if (cpu_bit & (cpu_bit - 1))
|
|
return -1;
|
|
return __ffs(cpu_bit);
|
|
}
|
|
|
|
/*
|
|
* gic_migrate_target - migrate IRQs to another CPU interface
|
|
*
|
|
* @new_cpu_id: the CPU target ID to migrate IRQs to
|
|
*
|
|
* Migrate all peripheral interrupts with a target matching the current CPU
|
|
* to the interface corresponding to @new_cpu_id. The CPU interface mapping
|
|
* is also updated. Targets to other CPU interfaces are unchanged.
|
|
* This must be called with IRQs locally disabled.
|
|
*/
|
|
void gic_migrate_target(unsigned int new_cpu_id)
|
|
{
|
|
unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
|
|
void __iomem *dist_base;
|
|
int i, ror_val, cpu = smp_processor_id();
|
|
u32 val, cur_target_mask, active_mask;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
if (!dist_base)
|
|
return;
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
|
|
cur_cpu_id = __ffs(gic_cpu_map[cpu]);
|
|
cur_target_mask = 0x01010101 << cur_cpu_id;
|
|
ror_val = (cur_cpu_id - new_cpu_id) & 31;
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
|
|
/* Update the target interface for this logical CPU */
|
|
gic_cpu_map[cpu] = 1 << new_cpu_id;
|
|
|
|
/*
|
|
* Find all the peripheral interrupts targetting the current
|
|
* CPU interface and migrate them to the new CPU interface.
|
|
* We skip DIST_TARGET 0 to 7 as they are read-only.
|
|
*/
|
|
for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
|
|
val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
active_mask = val & cur_target_mask;
|
|
if (active_mask) {
|
|
val &= ~active_mask;
|
|
val |= ror32(active_mask, ror_val);
|
|
writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
|
|
}
|
|
}
|
|
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
/*
|
|
* Now let's migrate and clear any potential SGIs that might be
|
|
* pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
|
|
* is a banked register, we can only forward the SGI using
|
|
* GIC_DIST_SOFTINT. The original SGI source is lost but Linux
|
|
* doesn't use that information anyway.
|
|
*
|
|
* For the same reason we do not adjust SGI source information
|
|
* for previously sent SGIs by us to other CPUs either.
|
|
*/
|
|
for (i = 0; i < 16; i += 4) {
|
|
int j;
|
|
val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
|
|
if (!val)
|
|
continue;
|
|
writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
|
|
for (j = i; j < i + 4; j++) {
|
|
if (val & 0xff)
|
|
writel_relaxed((1 << (new_cpu_id + 16)) | j,
|
|
dist_base + GIC_DIST_SOFTINT);
|
|
val >>= 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* gic_get_sgir_physaddr - get the physical address for the SGI register
|
|
*
|
|
* REturn the physical address of the SGI register to be used
|
|
* by some early assembly code when the kernel is not yet available.
|
|
*/
|
|
static unsigned long gic_dist_physaddr;
|
|
|
|
unsigned long gic_get_sgir_physaddr(void)
|
|
{
|
|
if (!gic_dist_physaddr)
|
|
return 0;
|
|
return gic_dist_physaddr + GIC_DIST_SOFTINT;
|
|
}
|
|
|
|
void __init gic_init_physaddr(struct device_node *node)
|
|
{
|
|
struct resource res;
|
|
if (of_address_to_resource(node, 0, &res) == 0) {
|
|
gic_dist_physaddr = res.start;
|
|
pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gic_init_physaddr(node) do { } while (0)
|
|
#endif
|
|
|
|
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
if (hw < 32) {
|
|
irq_set_percpu_devid(irq);
|
|
irq_set_chip_and_handler(irq, &gic_chip,
|
|
handle_percpu_devid_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
|
|
} else {
|
|
irq_set_chip_and_handler(irq, &gic_chip,
|
|
handle_fasteoi_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
|
|
gic_routable_irq_domain_ops->map(d, irq, hw);
|
|
}
|
|
irq_set_chip_data(irq, d->host_data);
|
|
return 0;
|
|
}
|
|
|
|
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
gic_routable_irq_domain_ops->unmap(d, irq);
|
|
}
|
|
|
|
static int gic_irq_domain_xlate(struct irq_domain *d,
|
|
struct device_node *controller,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
unsigned long ret = 0;
|
|
|
|
if (d->of_node != controller)
|
|
return -EINVAL;
|
|
if (intsize < 3)
|
|
return -EINVAL;
|
|
|
|
/* Get the interrupt number and add 16 to skip over SGIs */
|
|
*out_hwirq = intspec[1] + 16;
|
|
|
|
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
|
|
if (!intspec[0]) {
|
|
ret = gic_routable_irq_domain_ops->xlate(d, controller,
|
|
intspec,
|
|
intsize,
|
|
out_hwirq,
|
|
out_type);
|
|
|
|
if (IS_ERR_VALUE(ret))
|
|
return ret;
|
|
}
|
|
|
|
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_secondary_init(struct notifier_block *nfb, unsigned long action,
|
|
void *hcpu)
|
|
{
|
|
if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
|
|
gic_cpu_init(&gic_data[0]);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
/*
|
|
* Notifier for enabling the GIC CPU interface. Set an arbitrarily high
|
|
* priority because the GIC needs to be up before the ARM generic timers.
|
|
*/
|
|
static struct notifier_block gic_cpu_notifier = {
|
|
.notifier_call = gic_secondary_init,
|
|
.priority = 100,
|
|
};
|
|
#endif
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_ops = {
|
|
.map = gic_irq_domain_map,
|
|
.unmap = gic_irq_domain_unmap,
|
|
.xlate = gic_irq_domain_xlate,
|
|
};
|
|
|
|
/* Default functions for routable irq domain */
|
|
static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void gic_routable_irq_domain_unmap(struct irq_domain *d,
|
|
unsigned int irq)
|
|
{
|
|
}
|
|
|
|
static int gic_routable_irq_domain_xlate(struct irq_domain *d,
|
|
struct device_node *controller,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq,
|
|
unsigned int *out_type)
|
|
{
|
|
*out_hwirq += 16;
|
|
return 0;
|
|
}
|
|
|
|
const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
|
|
.map = gic_routable_irq_domain_map,
|
|
.unmap = gic_routable_irq_domain_unmap,
|
|
.xlate = gic_routable_irq_domain_xlate,
|
|
};
|
|
|
|
const struct irq_domain_ops *gic_routable_irq_domain_ops =
|
|
&gic_default_routable_irq_domain_ops;
|
|
|
|
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
|
|
void __iomem *dist_base, void __iomem *cpu_base,
|
|
u32 percpu_offset, struct device_node *node)
|
|
{
|
|
irq_hw_number_t hwirq_base;
|
|
struct gic_chip_data *gic;
|
|
int gic_irqs, irq_base, i;
|
|
int nr_routable_irqs;
|
|
|
|
BUG_ON(gic_nr >= MAX_GIC_NR);
|
|
|
|
gic = &gic_data[gic_nr];
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
if (percpu_offset) { /* Frankein-GIC without banked registers... */
|
|
unsigned int cpu;
|
|
|
|
gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
|
|
gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
|
|
if (WARN_ON(!gic->dist_base.percpu_base ||
|
|
!gic->cpu_base.percpu_base)) {
|
|
free_percpu(gic->dist_base.percpu_base);
|
|
free_percpu(gic->cpu_base.percpu_base);
|
|
return;
|
|
}
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
unsigned long offset = percpu_offset * cpu_logical_map(cpu);
|
|
*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
|
|
*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
|
|
}
|
|
|
|
gic_set_base_accessor(gic, gic_get_percpu_base);
|
|
} else
|
|
#endif
|
|
{ /* Normal, sane GIC... */
|
|
WARN(percpu_offset,
|
|
"GIC_NON_BANKED not enabled, ignoring %08x offset!",
|
|
percpu_offset);
|
|
gic->dist_base.common_base = dist_base;
|
|
gic->cpu_base.common_base = cpu_base;
|
|
gic_set_base_accessor(gic, gic_get_common_base);
|
|
}
|
|
|
|
/*
|
|
* Initialize the CPU interface map to all CPUs.
|
|
* It will be refined as each CPU probes its ID.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
gic_cpu_map[i] = 0xff;
|
|
|
|
/*
|
|
* For primary GICs, skip over SGIs.
|
|
* For secondary GICs, skip over PPIs, too.
|
|
*/
|
|
if (gic_nr == 0 && (irq_start & 31) > 0) {
|
|
hwirq_base = 16;
|
|
if (irq_start != -1)
|
|
irq_start = (irq_start & ~31) + 16;
|
|
} else {
|
|
hwirq_base = 32;
|
|
}
|
|
|
|
/*
|
|
* Find out how many interrupts are supported.
|
|
* The GIC only supports up to 1020 interrupt sources.
|
|
*/
|
|
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
|
|
gic_irqs = (gic_irqs + 1) * 32;
|
|
if (gic_irqs > 1020)
|
|
gic_irqs = 1020;
|
|
gic->gic_irqs = gic_irqs;
|
|
|
|
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
|
|
|
|
if (of_property_read_u32(node, "arm,routable-irqs",
|
|
&nr_routable_irqs)) {
|
|
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
|
|
numa_node_id());
|
|
if (IS_ERR_VALUE(irq_base)) {
|
|
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
|
|
irq_start);
|
|
irq_base = irq_start;
|
|
}
|
|
|
|
gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
|
|
hwirq_base, &gic_irq_domain_ops, gic);
|
|
} else {
|
|
gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
|
|
&gic_irq_domain_ops,
|
|
gic);
|
|
}
|
|
|
|
if (WARN_ON(!gic->domain))
|
|
return;
|
|
|
|
if (gic_nr == 0) {
|
|
#ifdef CONFIG_SMP
|
|
set_smp_cross_call(gic_raise_softirq);
|
|
register_cpu_notifier(&gic_cpu_notifier);
|
|
#endif
|
|
set_handle_irq(gic_handle_irq);
|
|
}
|
|
|
|
gic_chip.flags |= gic_arch_extn.flags;
|
|
gic_dist_init(gic);
|
|
gic_cpu_init(gic);
|
|
gic_pm_init(gic);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int gic_cnt __initdata;
|
|
|
|
static int __init
|
|
gic_of_init(struct device_node *node, struct device_node *parent)
|
|
{
|
|
void __iomem *cpu_base;
|
|
void __iomem *dist_base;
|
|
u32 percpu_offset;
|
|
int irq;
|
|
|
|
if (WARN_ON(!node))
|
|
return -ENODEV;
|
|
|
|
dist_base = of_iomap(node, 0);
|
|
WARN(!dist_base, "unable to map gic dist registers\n");
|
|
|
|
cpu_base = of_iomap(node, 1);
|
|
WARN(!cpu_base, "unable to map gic cpu registers\n");
|
|
|
|
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
|
|
percpu_offset = 0;
|
|
|
|
gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
|
|
if (!gic_cnt)
|
|
gic_init_physaddr(node);
|
|
|
|
if (parent) {
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
gic_cascade_irq(gic_cnt, irq);
|
|
}
|
|
gic_cnt++;
|
|
return 0;
|
|
}
|
|
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
|
|
|
|
#endif
|