linux/drivers/media/dvb-frontends/mxl5xx_regs.h
Cai Huoqing 5f1644bd81 media: dvb-frontend/mxl5xx: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00

359 lines
16 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2011-2013 MaxLinear, Inc. All rights reserved
*
* This program may alternatively be licensed under a proprietary license from
* MaxLinear, Inc.
*
*/
#ifndef __MXL58X_REGISTERS_H__
#define __MXL58X_REGISTERS_H__
#define HYDRA_INTR_STATUS_REG 0x80030008
#define HYDRA_INTR_MASK_REG 0x8003000C
#define HYDRA_CRYSTAL_SETTING 0x3FFFC5F0 /* 0 - 24 MHz & 1 - 27 MHz */
#define HYDRA_CRYSTAL_CAP 0x3FFFEDA4 /* 0 - 24 MHz & 1 - 27 MHz */
#define HYDRA_CPU_RESET_REG 0x8003003C
#define HYDRA_CPU_RESET_DATA 0x00000400
#define HYDRA_RESET_TRANSPORT_FIFO_REG 0x80030028
#define HYDRA_RESET_TRANSPORT_FIFO_DATA 0x00000000
#define HYDRA_RESET_BBAND_REG 0x80030024
#define HYDRA_RESET_BBAND_DATA 0x00000000
#define HYDRA_RESET_XBAR_REG 0x80030020
#define HYDRA_RESET_XBAR_DATA 0x00000000
#define HYDRA_MODULES_CLK_1_REG 0x80030014
#define HYDRA_DISABLE_CLK_1 0x00000000
#define HYDRA_MODULES_CLK_2_REG 0x8003001C
#define HYDRA_DISABLE_CLK_2 0x0000000B
#define HYDRA_PRCM_ROOT_CLK_REG 0x80030018
#define HYDRA_PRCM_ROOT_CLK_DISABLE 0x00000000
#define HYDRA_CPU_RESET_CHECK_REG 0x80030008
#define HYDRA_CPU_RESET_CHECK_OFFSET 0x40000000 /* <bit 30> */
#define HYDRA_SKU_ID_REG 0x90000190
#define FW_DL_SIGN_ADDR 0x3FFFEAE0
/* Register to check if FW is running or not */
#define HYDRA_HEAR_BEAT 0x3FFFEDDC
/* Firmware version */
#define HYDRA_FIRMWARE_VERSION 0x3FFFEDB8
#define HYDRA_FW_RC_VERSION 0x3FFFCFAC
/* Firmware patch version */
#define HYDRA_FIRMWARE_PATCH_VERSION 0x3FFFEDC2
/* SOC operating temperature in C */
#define HYDRA_TEMPARATURE 0x3FFFEDB4
/* Demod & Tuner status registers */
/* Demod 0 status base address */
#define HYDRA_DEMOD_0_BASE_ADDR 0x3FFFC64C
/* Tuner 0 status base address */
#define HYDRA_TUNER_0_BASE_ADDR 0x3FFFCE4C
#define POWER_FROM_ADCRSSI_READBACK 0x3FFFEB6C
/* Macros to determine base address of respective demod or tuner */
#define HYDRA_DMD_STATUS_OFFSET(demodID) ((demodID) * 0x100)
#define HYDRA_TUNER_STATUS_OFFSET(tunerID) ((tunerID) * 0x40)
/* Demod status address offset from respective demod's base address */
#define HYDRA_DMD_AGC_DIG_LEVEL_ADDR_OFFSET 0x3FFFC64C
#define HYDRA_DMD_LOCK_STATUS_ADDR_OFFSET 0x3FFFC650
#define HYDRA_DMD_ACQ_STATUS_ADDR_OFFSET 0x3FFFC654
#define HYDRA_DMD_STANDARD_ADDR_OFFSET 0x3FFFC658
#define HYDRA_DMD_SPECTRUM_INVERSION_ADDR_OFFSET 0x3FFFC65C
#define HYDRA_DMD_SPECTRUM_ROLL_OFF_ADDR_OFFSET 0x3FFFC660
#define HYDRA_DMD_SYMBOL_RATE_ADDR_OFFSET 0x3FFFC664
#define HYDRA_DMD_MODULATION_SCHEME_ADDR_OFFSET 0x3FFFC668
#define HYDRA_DMD_FEC_CODE_RATE_ADDR_OFFSET 0x3FFFC66C
#define HYDRA_DMD_SNR_ADDR_OFFSET 0x3FFFC670
#define HYDRA_DMD_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC674
#define HYDRA_DMD_CTL_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC678
#define HYDRA_DMD_STR_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC67C
#define HYDRA_DMD_FTL_FREQ_OFFSET_ADDR_OFFSET 0x3FFFC680
#define HYDRA_DMD_STR_NBC_SYNC_LOCK_ADDR_OFFSET 0x3FFFC684
#define HYDRA_DMD_CYCLE_SLIP_COUNT_ADDR_OFFSET 0x3FFFC688
#define HYDRA_DMD_DISPLAY_I_ADDR_OFFSET 0x3FFFC68C
#define HYDRA_DMD_DISPLAY_Q_ADDR_OFFSET 0x3FFFC68E
#define HYDRA_DMD_DVBS2_CRC_ERRORS_ADDR_OFFSET 0x3FFFC690
#define HYDRA_DMD_DVBS2_PER_COUNT_ADDR_OFFSET 0x3FFFC694
#define HYDRA_DMD_DVBS2_PER_WINDOW_ADDR_OFFSET 0x3FFFC698
#define HYDRA_DMD_DVBS_CORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC69C
#define HYDRA_DMD_DVBS_UNCORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6A0
#define HYDRA_DMD_DVBS_BER_COUNT_ADDR_OFFSET 0x3FFFC6A4
#define HYDRA_DMD_DVBS_BER_WINDOW_ADDR_OFFSET 0x3FFFC6A8
/* Debug-purpose DVB-S DMD 0 */
#define HYDRA_DMD_DVBS_1ST_CORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6C8 /* corrected RS Errors: 1st iteration */
#define HYDRA_DMD_DVBS_1ST_UNCORR_RS_ERRORS_ADDR_OFFSET 0x3FFFC6CC /* uncorrected RS Errors: 1st iteration */
#define HYDRA_DMD_DVBS_BER_COUNT_1ST_ADDR_OFFSET 0x3FFFC6D0
#define HYDRA_DMD_DVBS_BER_WINDOW_1ST_ADDR_OFFSET 0x3FFFC6D4
#define HYDRA_DMD_TUNER_ID_ADDR_OFFSET 0x3FFFC6AC
#define HYDRA_DMD_DVBS2_PILOT_ON_OFF_ADDR_OFFSET 0x3FFFC6B0
#define HYDRA_DMD_FREQ_SEARCH_RANGE_KHZ_ADDR_OFFSET 0x3FFFC6B4
#define HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET 0x3FFFC6B8
#define HYDRA_DMD_STATUS_CENTER_FREQ_IN_KHZ_ADDR 0x3FFFC704
#define HYDRA_DMD_STATUS_INPUT_POWER_ADDR 0x3FFFC708
/* DVB-S new scaled_BER_count for a new BER API, see HYDRA-1343 "DVB-S post viterbi information" */
#define DMD0_STATUS_DVBS_1ST_SCALED_BER_COUNT_ADDR 0x3FFFC710 /* DMD 0: 1st iteration BER count scaled by HYDRA_BER_COUNT_SCALING_FACTOR */
#define DMD0_STATUS_DVBS_SCALED_BER_COUNT_ADDR 0x3FFFC714 /* DMD 0: 2nd iteration BER count scaled by HYDRA_BER_COUNT_SCALING_FACTOR */
#define DMD0_SPECTRUM_MIN_GAIN_STATUS 0x3FFFC73C
#define DMD0_SPECTRUM_MIN_GAIN_WB_SAGC_VALUE 0x3FFFC740
#define DMD0_SPECTRUM_MIN_GAIN_NB_SAGC_VALUE 0x3FFFC744
#define HYDRA_DMD_STATUS_END_ADDR_OFFSET 0x3FFFC748
/* Tuner status address offset from respective tuners's base address */
#define HYDRA_TUNER_DEMOD_ID_ADDR_OFFSET 0x3FFFCE4C
#define HYDRA_TUNER_AGC_LOCK_OFFSET 0x3FFFCE50
#define HYDRA_TUNER_SPECTRUM_STATUS_OFFSET 0x3FFFCE54
#define HYDRA_TUNER_SPECTRUM_BIN_SIZE_OFFSET 0x3FFFCE58
#define HYDRA_TUNER_SPECTRUM_ADDRESS_OFFSET 0x3FFFCE5C
#define HYDRA_TUNER_ENABLE_COMPLETE 0x3FFFEB78
#define HYDRA_DEMOD_STATUS_LOCK(devId, demodId) write_register(devId, (HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET + HYDRA_DMD_STATUS_OFFSET(demodId)), MXL_YES)
#define HYDRA_DEMOD_STATUS_UNLOCK(devId, demodId) write_register(devId, (HYDRA_DMD_STATUS_LOCK_ADDR_OFFSET + HYDRA_DMD_STATUS_OFFSET(demodId)), MXL_NO)
#define HYDRA_VERSION 0x3FFFEDB8
#define HYDRA_DEMOD0_VERSION 0x3FFFEDBC
#define HYDRA_DEMOD1_VERSION 0x3FFFEDC0
#define HYDRA_DEMOD2_VERSION 0x3FFFEDC4
#define HYDRA_DEMOD3_VERSION 0x3FFFEDC8
#define HYDRA_DEMOD4_VERSION 0x3FFFEDCC
#define HYDRA_DEMOD5_VERSION 0x3FFFEDD0
#define HYDRA_DEMOD6_VERSION 0x3FFFEDD4
#define HYDRA_DEMOD7_VERSION 0x3FFFEDD8
#define HYDRA_HEAR_BEAT 0x3FFFEDDC
#define HYDRA_SKU_MGMT 0x3FFFEBC0
#define MXL_HYDRA_FPGA_A_ADDRESS 0x91C00000
#define MXL_HYDRA_FPGA_B_ADDRESS 0x91D00000
/* TS control base address */
#define HYDRA_TS_CTRL_BASE_ADDR 0x90700000
#define MPEG_MUX_MODE_SLICE0_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x08)
#define MPEG_MUX_MODE_SLICE1_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x08)
#define PID_BANK_SEL_SLICE0_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190)
#define PID_BANK_SEL_SLICE1_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0)
#define MPEG_CLK_GATED_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x20)
#define MPEG_CLK_ALWAYS_ON_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1D4)
#define HYDRA_REGULAR_PID_BANK_A_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190)
#define HYDRA_FIXED_PID_BANK_A_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x190)
#define HYDRA_REGULAR_PID_BANK_B_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0)
#define HYDRA_FIXED_PID_BANK_B_REG (HYDRA_TS_CTRL_BASE_ADDR + 0x1B0)
#define FIXED_PID_TBL_REG_ADDRESS_0 (HYDRA_TS_CTRL_BASE_ADDR + 0x9000)
#define FIXED_PID_TBL_REG_ADDRESS_1 (HYDRA_TS_CTRL_BASE_ADDR + 0x9100)
#define FIXED_PID_TBL_REG_ADDRESS_2 (HYDRA_TS_CTRL_BASE_ADDR + 0x9200)
#define FIXED_PID_TBL_REG_ADDRESS_3 (HYDRA_TS_CTRL_BASE_ADDR + 0x9300)
#define FIXED_PID_TBL_REG_ADDRESS_4 (HYDRA_TS_CTRL_BASE_ADDR + 0xB000)
#define FIXED_PID_TBL_REG_ADDRESS_5 (HYDRA_TS_CTRL_BASE_ADDR + 0xB100)
#define FIXED_PID_TBL_REG_ADDRESS_6 (HYDRA_TS_CTRL_BASE_ADDR + 0xB200)
#define FIXED_PID_TBL_REG_ADDRESS_7 (HYDRA_TS_CTRL_BASE_ADDR + 0xB300)
#define REGULAR_PID_TBL_REG_ADDRESS_0 (HYDRA_TS_CTRL_BASE_ADDR + 0x8000)
#define REGULAR_PID_TBL_REG_ADDRESS_1 (HYDRA_TS_CTRL_BASE_ADDR + 0x8200)
#define REGULAR_PID_TBL_REG_ADDRESS_2 (HYDRA_TS_CTRL_BASE_ADDR + 0x8400)
#define REGULAR_PID_TBL_REG_ADDRESS_3 (HYDRA_TS_CTRL_BASE_ADDR + 0x8600)
#define REGULAR_PID_TBL_REG_ADDRESS_4 (HYDRA_TS_CTRL_BASE_ADDR + 0xA000)
#define REGULAR_PID_TBL_REG_ADDRESS_5 (HYDRA_TS_CTRL_BASE_ADDR + 0xA200)
#define REGULAR_PID_TBL_REG_ADDRESS_6 (HYDRA_TS_CTRL_BASE_ADDR + 0xA400)
#define REGULAR_PID_TBL_REG_ADDRESS_7 (HYDRA_TS_CTRL_BASE_ADDR + 0xA600)
/***************************************************************************/
#define PAD_MUX_GPIO_00_SYNC_BASEADDR 0x90000188
#define PAD_MUX_UART_RX_C_PINMUX_BASEADDR 0x9000001C
#define XPT_PACKET_GAP_MIN_BASEADDR 0x90700044
#define XPT_NCO_COUNT_BASEADDR 0x90700238
#define XPT_NCO_COUNT_BASEADDR1 0x9070023C
/* V2 DigRF status register */
#define XPT_PID_BASEADDR 0x90708000
#define XPT_PID_REMAP_BASEADDR 0x90708004
#define XPT_KNOWN_PID_BASEADDR 0x90709000
#define XPT_PID_BASEADDR1 0x9070A000
#define XPT_PID_REMAP_BASEADDR1 0x9070A004
#define XPT_KNOWN_PID_BASEADDR1 0x9070B000
#define XPT_BERT_LOCK_BASEADDR 0x907000B8
#define XPT_BERT_BASEADDR 0x907000BC
#define XPT_BERT_INVERT_BASEADDR 0x907000C0
#define XPT_BERT_HEADER_BASEADDR 0x907000C4
#define XPT_BERT_BASEADDR1 0x907000C8
#define XPT_BERT_BIT_COUNT0_BASEADDR 0x907000CC
#define XPT_BERT_BIT_COUNT0_BASEADDR1 0x907000D0
#define XPT_BERT_BIT_COUNT1_BASEADDR 0x907000D4
#define XPT_BERT_BIT_COUNT1_BASEADDR1 0x907000D8
#define XPT_BERT_BIT_COUNT2_BASEADDR 0x907000DC
#define XPT_BERT_BIT_COUNT2_BASEADDR1 0x907000E0
#define XPT_BERT_BIT_COUNT3_BASEADDR 0x907000E4
#define XPT_BERT_BIT_COUNT3_BASEADDR1 0x907000E8
#define XPT_BERT_BIT_COUNT4_BASEADDR 0x907000EC
#define XPT_BERT_BIT_COUNT4_BASEADDR1 0x907000F0
#define XPT_BERT_BIT_COUNT5_BASEADDR 0x907000F4
#define XPT_BERT_BIT_COUNT5_BASEADDR1 0x907000F8
#define XPT_BERT_BIT_COUNT6_BASEADDR 0x907000FC
#define XPT_BERT_BIT_COUNT6_BASEADDR1 0x90700100
#define XPT_BERT_BIT_COUNT7_BASEADDR 0x90700104
#define XPT_BERT_BIT_COUNT7_BASEADDR1 0x90700108
#define XPT_BERT_ERR_COUNT0_BASEADDR 0x9070010C
#define XPT_BERT_ERR_COUNT0_BASEADDR1 0x90700110
#define XPT_BERT_ERR_COUNT1_BASEADDR 0x90700114
#define XPT_BERT_ERR_COUNT1_BASEADDR1 0x90700118
#define XPT_BERT_ERR_COUNT2_BASEADDR 0x9070011C
#define XPT_BERT_ERR_COUNT2_BASEADDR1 0x90700120
#define XPT_BERT_ERR_COUNT3_BASEADDR 0x90700124
#define XPT_BERT_ERR_COUNT3_BASEADDR1 0x90700128
#define XPT_BERT_ERR_COUNT4_BASEADDR 0x9070012C
#define XPT_BERT_ERR_COUNT4_BASEADDR1 0x90700130
#define XPT_BERT_ERR_COUNT5_BASEADDR 0x90700134
#define XPT_BERT_ERR_COUNT5_BASEADDR1 0x90700138
#define XPT_BERT_ERR_COUNT6_BASEADDR 0x9070013C
#define XPT_BERT_ERR_COUNT6_BASEADDR1 0x90700140
#define XPT_BERT_ERR_COUNT7_BASEADDR 0x90700144
#define XPT_BERT_ERR_COUNT7_BASEADDR1 0x90700148
#define XPT_BERT_ERROR_BASEADDR 0x9070014C
#define XPT_BERT_ANALYZER_BASEADDR 0x90700150
#define XPT_BERT_ANALYZER_BASEADDR1 0x90700154
#define XPT_BERT_ANALYZER_BASEADDR2 0x90700158
#define XPT_BERT_ANALYZER_BASEADDR3 0x9070015C
#define XPT_BERT_ANALYZER_BASEADDR4 0x90700160
#define XPT_BERT_ANALYZER_BASEADDR5 0x90700164
#define XPT_BERT_ANALYZER_BASEADDR6 0x90700168
#define XPT_BERT_ANALYZER_BASEADDR7 0x9070016C
#define XPT_BERT_ANALYZER_BASEADDR8 0x90700170
#define XPT_BERT_ANALYZER_BASEADDR9 0x90700174
#define XPT_DMD0_BASEADDR 0x9070024C
/* V2 AGC Gain Freeze & step */
#define DBG_ENABLE_DISABLE_AGC (0x3FFFCF60) /* 1: DISABLE, 0:ENABLE */
#define WB_DFE0_DFE_FB_RF1_BASEADDR 0x903004A4
#define WB_DFE1_DFE_FB_RF1_BASEADDR 0x904004A4
#define WB_DFE2_DFE_FB_RF1_BASEADDR 0x905004A4
#define WB_DFE3_DFE_FB_RF1_BASEADDR 0x906004A4
#define AFE_REG_D2A_TA_RFFE_LNA_BO_1P8_BASEADDR 0x90200104
#define AFE_REG_AFE_REG_SPARE_BASEADDR 0x902000A0
#define AFE_REG_AFE_REG_SPARE_BASEADDR1 0x902000B4
#define AFE_REG_AFE_REG_SPARE_BASEADDR2 0x902000C4
#define AFE_REG_AFE_REG_SPARE_BASEADDR3 0x902000D4
#define WB_DFE0_DFE_FB_AGC_BASEADDR 0x90300498
#define WB_DFE1_DFE_FB_AGC_BASEADDR 0x90400498
#define WB_DFE2_DFE_FB_AGC_BASEADDR 0x90500498
#define WB_DFE3_DFE_FB_AGC_BASEADDR 0x90600498
#define WDT_WD_INT_BASEADDR 0x8002000C
#define FSK_TX_FTM_BASEADDR 0x80090000
#define FSK_TX_FTM_TX_CNT_BASEADDR 0x80090018
#define AFE_REG_D2A_FSK_BIAS_BASEADDR 0x90200040
#define DMD_TEI_BASEADDR 0x3FFFEBE0
#endif /* __MXL58X_REGISTERS_H__ */