linux/drivers/video/backlight/gpio_backlight.c
Stefan Agner 2f4647a149 backlight: gpio-backlight: Use default-on on GPIO request
There are situations where the backlight should be on at boot time
(e.g. if the boot loader already turned the display on). The DT
bindings specify the "default-on" property for that purpose.
Currently, the initial state of the GPIO at request time is always
set to logical off (high or low depending on whether it is an
active high or low GPIO). Since the GPIO is requested as an output,
the GPIO will be driven low for a short period of time, which leads
to a flickering display in the above use-case.

Initialize the GPIO depending on the default-on property to be
logical on or off.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11 07:58:35 +00:00

171 lines
4.2 KiB
C

/*
* gpio_backlight.c - Simple GPIO-controlled backlight
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/backlight.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
struct gpio_backlight {
struct device *dev;
struct device *fbdev;
int gpio;
int active;
int def_value;
};
static int gpio_backlight_update_status(struct backlight_device *bl)
{
struct gpio_backlight *gbl = bl_get_data(bl);
int brightness = bl->props.brightness;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK ||
bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
brightness = 0;
gpio_set_value_cansleep(gbl->gpio,
brightness ? gbl->active : !gbl->active);
return 0;
}
static int gpio_backlight_check_fb(struct backlight_device *bl,
struct fb_info *info)
{
struct gpio_backlight *gbl = bl_get_data(bl);
return gbl->fbdev == NULL || gbl->fbdev == info->dev;
}
static const struct backlight_ops gpio_backlight_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = gpio_backlight_update_status,
.check_fb = gpio_backlight_check_fb,
};
static int gpio_backlight_probe_dt(struct platform_device *pdev,
struct gpio_backlight *gbl)
{
struct device_node *np = pdev->dev.of_node;
enum of_gpio_flags gpio_flags;
gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
if (!gpio_is_valid(gbl->gpio)) {
if (gbl->gpio != -EPROBE_DEFER) {
dev_err(&pdev->dev,
"Error: The gpios parameter is missing or invalid.\n");
}
return gbl->gpio;
}
gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
gbl->def_value = of_property_read_bool(np, "default-on");
return 0;
}
static int gpio_backlight_probe(struct platform_device *pdev)
{
struct gpio_backlight_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct backlight_properties props;
struct backlight_device *bl;
struct gpio_backlight *gbl;
struct device_node *np = pdev->dev.of_node;
unsigned long flags = GPIOF_DIR_OUT;
int ret;
if (!pdata && !np) {
dev_err(&pdev->dev,
"failed to find platform data or device tree node.\n");
return -ENODEV;
}
gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
if (gbl == NULL)
return -ENOMEM;
gbl->dev = &pdev->dev;
if (np) {
ret = gpio_backlight_probe_dt(pdev, gbl);
if (ret)
return ret;
} else {
gbl->fbdev = pdata->fbdev;
gbl->gpio = pdata->gpio;
gbl->active = pdata->active_low ? 0 : 1;
gbl->def_value = pdata->def_value;
}
if (gbl->active)
flags |= gbl->def_value ? GPIOF_INIT_HIGH : GPIOF_INIT_LOW;
else
flags |= gbl->def_value ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
ret = devm_gpio_request_one(gbl->dev, gbl->gpio, flags,
pdata ? pdata->name : "backlight");
if (ret < 0) {
dev_err(&pdev->dev, "unable to request GPIO\n");
return ret;
}
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
props.max_brightness = 1;
bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev),
&pdev->dev, gbl, &gpio_backlight_ops,
&props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
return PTR_ERR(bl);
}
bl->props.brightness = gbl->def_value;
backlight_update_status(bl);
platform_set_drvdata(pdev, bl);
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id gpio_backlight_of_match[] = {
{ .compatible = "gpio-backlight" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, gpio_backlight_of_match);
#endif
static struct platform_driver gpio_backlight_driver = {
.driver = {
.name = "gpio-backlight",
.of_match_table = of_match_ptr(gpio_backlight_of_match),
},
.probe = gpio_backlight_probe,
};
module_platform_driver(gpio_backlight_driver);
MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
MODULE_DESCRIPTION("GPIO-based Backlight Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio-backlight");