linux/arch/arm/mach-integrator/impd1.c

/*
 *  linux/arch/arm/mach-integrator/impd1.c
 *
 *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  This file provides the core support for the IM-PD1 module.
 *
 * Module / boot parameters.
 *   lmid=n   impd1.lmid=n - set the logic module position in stack to 'n'
 */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-vic.h>
#include <linux/gpio/machine.h>

#include <asm/sizes.h>
#include "lm.h"
#include "impd1.h"

static int module_id;

module_param_named(lmid, module_id, int, 0444);
MODULE_PARM_DESC(lmid, "logic module stack position");

struct impd1_module {
	void __iomem	*base;
	void __iomem	*vic_base;
};

void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
{
	struct impd1_module *impd1 = dev_get_drvdata(dev);
	u32 cur;

	val &= mask;
	cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
	writel(cur | val, impd1->base + IMPD1_CTRL);
}

EXPORT_SYMBOL(impd1_tweak_control);

/*
 * MMC support
 */
static struct mmci_platform_data mmc_data = {
	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
};

/*
 * CLCD support
 */
#define PANEL		PROSPECTOR

#define LTM10C209		1
#define PROSPECTOR		2
#define SVGA			3
#define VGA			4

#if PANEL == VGA
#define PANELTYPE	vga
static struct clcd_panel vga = {
	.mode		= {
		.name		= "VGA",
		.refresh	= 60,
		.xres		= 640,
		.yres		= 480,
		.pixclock	= 39721,
		.left_margin	= 40,
		.right_margin	= 24,
		.upper_margin	= 32,
		.lower_margin	= 11,
		.hsync_len	= 96,
		.vsync_len	= 2,
		.sync		= 0,
		.vmode		= FB_VMODE_NONINTERLACED,
	},
	.width		= -1,
	.height		= -1,
	.tim2		= TIM2_BCD | TIM2_IPC,
	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
	.caps		= CLCD_CAP_5551,
	.connector	= IMPD1_CTRL_DISP_VGA,
	.bpp		= 16,
	.grayscale	= 0,
};

#elif PANEL == SVGA
#define PANELTYPE	svga
static struct clcd_panel svga = {
	.mode		= {
		.name		= "SVGA",
		.refresh	= 0,
		.xres		= 800,
		.yres		= 600,
		.pixclock	= 27778,
		.left_margin	= 20,
		.right_margin	= 20,
		.upper_margin	= 5,
		.lower_margin	= 5,
		.hsync_len	= 164,
		.vsync_len	= 62,
		.sync		= 0,
		.vmode		= FB_VMODE_NONINTERLACED,
	},
	.width		= -1,
	.height		= -1,
	.tim2		= TIM2_BCD,
	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
	.connector	= IMPD1_CTRL_DISP_VGA,
	.caps		= CLCD_CAP_5551,
	.bpp		= 16,
	.grayscale	= 0,
};

#elif PANEL == PROSPECTOR
#define PANELTYPE	prospector
static struct clcd_panel prospector = {
	.mode		= {
		.name		= "PROSPECTOR",
		.refresh	= 0,
		.xres		= 640,
		.yres		= 480,
		.pixclock	= 40000,
		.left_margin	= 33,
		.right_margin	= 64,
		.upper_margin	= 36,
		.lower_margin	= 7,
		.hsync_len	= 64,
		.vsync_len	= 25,
		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED,
	},
	.width		= -1,
	.height		= -1,
	.tim2		= TIM2_BCD,
	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
	.caps		= CLCD_CAP_5551,
	.fixedtimings	= 1,
	.connector	= IMPD1_CTRL_DISP_LCD,
	.bpp		= 16,
	.grayscale	= 0,
};

#elif PANEL == LTM10C209
#define PANELTYPE	ltm10c209
/*
 * Untested.
 */
static struct clcd_panel ltm10c209 = {
	.mode		= {
		.name		= "LTM10C209",
		.refresh	= 0,
		.xres		= 640,
		.yres		= 480,
		.pixclock	= 40000,
		.left_margin	= 20,
		.right_margin	= 20,
		.upper_margin	= 19,
		.lower_margin	= 19,
		.hsync_len	= 20,
		.vsync_len	= 10,
		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode		= FB_VMODE_NONINTERLACED,
	},
	.width		= -1,
	.height		= -1,
	.tim2		= TIM2_BCD,
	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
	.caps		= CLCD_CAP_5551,
	.fixedtimings	= 1,
	.connector	= IMPD1_CTRL_DISP_LCD,
	.bpp		= 16,
	.grayscale	= 0,
};
#endif

/*
 * Disable all display connectors on the interface module.
 */
static void impd1fb_clcd_disable(struct clcd_fb *fb)
{
	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
}

/*
 * Enable the relevant connector on the interface module.
 */
static void impd1fb_clcd_enable(struct clcd_fb *fb)
{
	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
			fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
}

static int impd1fb_clcd_setup(struct clcd_fb *fb)
{
	unsigned long framebase = fb->dev->res.start + 0x01000000;
	unsigned long framesize = SZ_1M;
	int ret = 0;

	fb->panel = &PANELTYPE;

	if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
		printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
		return -EBUSY;
	}

	fb->fb.screen_base = ioremap(framebase, framesize);
	if (!fb->fb.screen_base) {
		printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
		ret = -ENOMEM;
		goto free_buffer;
	}

	fb->fb.fix.smem_start	= framebase;
	fb->fb.fix.smem_len	= framesize;

	return 0;

 free_buffer:
	release_mem_region(framebase, framesize);
	return ret;
}

static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
	unsigned long start, size;

	start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
	size = vma->vm_end - vma->vm_start;

	return remap_pfn_range(vma, vma->vm_start, start, size,
			       vma->vm_page_prot);
}

static void impd1fb_clcd_remove(struct clcd_fb *fb)
{
	iounmap(fb->fb.screen_base);
	release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
}

static struct clcd_board impd1_clcd_data = {
	.name		= "IM-PD/1",
	.caps		= CLCD_CAP_5551 | CLCD_CAP_888,
	.check		= clcdfb_check,
	.decode		= clcdfb_decode,
	.disable	= impd1fb_clcd_disable,
	.enable		= impd1fb_clcd_enable,
	.setup		= impd1fb_clcd_setup,
	.mmap		= impd1fb_clcd_mmap,
	.remove		= impd1fb_clcd_remove,
};

struct impd1_device {
	unsigned long	offset;
	unsigned int	irq[2];
	unsigned int	id;
	void		*platform_data;
};

static struct impd1_device impd1_devs[] = {
	{
		.offset	= 0x00100000,
		.irq	= { 1 },
		.id	= 0x00141011,
	}, {
		.offset	= 0x00200000,
		.irq	= { 2 },
		.id	= 0x00141011,
	}, {
		.offset	= 0x00300000,
		.irq	= { 3 },
		.id	= 0x00041022,
	}, {
		.offset	= 0x00400000,
		.irq	= { 4 },
		.id	= 0x00041061,
	}, {
		.offset	= 0x00500000,
		.irq	= { 5 },
		.id	= 0x00041061,
	}, {
		.offset	= 0x00600000,
		.irq	= { 6 },
		.id	= 0x00041130,
	}, {
		.offset	= 0x00700000,
		.irq	= { 7, 8 },
		.id	= 0x00041181,
		.platform_data = &mmc_data,
	}, {
		.offset	= 0x00800000,
		.irq	= { 9 },
		.id	= 0x00041041,
	}, {
		.offset	= 0x01000000,
		.irq	= { 11 },
		.id	= 0x00041110,
		.platform_data = &impd1_clcd_data,
	}
};

/*
 * Valid IRQs: 0 thru 9 and 11, 10 unused.
 */
#define IMPD1_VALID_IRQS 0x00000bffU

/*
 * As this module is bool, it is OK to have this as __init_refok() - no
 * probe calls will be done after the initial system bootup, as devices
 * are discovered as part of the machine startup.
 */
static int __init_refok impd1_probe(struct lm_device *dev)
{
	struct impd1_module *impd1;
	int irq_base;
	int i;

	if (dev->id != module_id)
		return -EINVAL;

	if (!devm_request_mem_region(&dev->dev, dev->resource.start,
				     SZ_4K, "LM registers"))
		return -EBUSY;

	impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module),
			     GFP_KERNEL);
	if (!impd1)
		return -ENOMEM;

	impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K);
	if (!impd1->base)
		return -ENOMEM;

	integrator_impd1_clk_init(impd1->base, dev->id);

	if (!devm_request_mem_region(&dev->dev,
				     dev->resource.start + 0x03000000,
				     SZ_4K, "VIC"))
		return -EBUSY;

	impd1->vic_base = devm_ioremap(&dev->dev,
				       dev->resource.start + 0x03000000,
				       SZ_4K);
	if (!impd1->vic_base)
		return -ENOMEM;

	irq_base = vic_init_cascaded(impd1->vic_base, dev->irq,
				     IMPD1_VALID_IRQS, 0);

	lm_set_drvdata(dev, impd1);

	dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n",
		 (unsigned long)dev->resource.start);

	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
		struct impd1_device *idev = impd1_devs + i;
		struct amba_device *d;
		unsigned long pc_base;
		char devname[32];
		int irq1 = idev->irq[0];
		int irq2 = idev->irq[1];

		/* Translate IRQs to IM-PD1 local numberspace */
		if (irq1)
			irq1 += irq_base;
		if (irq2)
			irq2 += irq_base;

		pc_base = dev->resource.start + idev->offset;
		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);

		/* Add GPIO descriptor lookup table for the PL061 block */
		if (idev->offset == 0x00400000) {
			struct gpiod_lookup_table *lookup;
			char *chipname;
			char *mmciname;

			lookup = devm_kzalloc(&dev->dev,
					      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
					      GFP_KERNEL);
			chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
			mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
			lookup->dev_id = mmciname;
			/*
			 * Offsets on GPIO block 1:
			 * 3 = MMC WP (write protect)
			 * 4 = MMC CD (card detect)
			 *
			 * Offsets on GPIO block 2:
			 * 0 = Up key
			 * 1 = Down key
			 * 2 = Left key
			 * 3 = Right key
			 * 4 = Key lower left
			 * 5 = Key lower right
			 */
			/* We need the two MMCI GPIO entries */
			lookup->table[0].chip_label = chipname;
			lookup->table[0].chip_hwnum = 3;
			lookup->table[0].con_id = "wp";
			lookup->table[1].chip_label = chipname;
			lookup->table[1].chip_hwnum = 4;
			lookup->table[1].con_id = "cd";
			lookup->table[1].flags = GPIO_ACTIVE_LOW;
			gpiod_add_lookup_table(lookup);
		}

		d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
					    irq1, irq2,
					    idev->platform_data, idev->id,
					    &dev->resource);
		if (IS_ERR(d)) {
			dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d));
			continue;
		}
	}

	return 0;
}

static int impd1_remove_one(struct device *dev, void *data)
{
	device_unregister(dev);
	return 0;
}

static void impd1_remove(struct lm_device *dev)
{
	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
	integrator_impd1_clk_exit(dev->id);

	lm_set_drvdata(dev, NULL);
}

static struct lm_driver impd1_driver = {
	.drv = {
		.name	= "impd1",
		/*
		 * As we're dropping the probe() function, suppress driver
		 * binding from sysfs.
		 */
		.suppress_bind_attrs = true,
	},
	.probe		= impd1_probe,
	.remove		= impd1_remove,
};

static int __init impd1_init(void)
{
	return lm_driver_register(&impd1_driver);
}

static void __exit impd1_exit(void)
{
	lm_driver_unregister(&impd1_driver);
}

module_init(impd1_init);
module_exit(impd1_exit);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
MODULE_AUTHOR("Deep Blue Solutions Ltd");