mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 01:24:12 +08:00
06cfb2df7e
There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit9b236d2a69
("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit061f6a505a
("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1364 lines
32 KiB
C
1364 lines
32 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Handling of a single switch port
|
|
*
|
|
* Copyright (c) 2017 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*/
|
|
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
/**
|
|
* dsa_port_notify - Notify the switching fabric of changes to a port
|
|
* @dp: port on which change occurred
|
|
* @e: event, must be of type DSA_NOTIFIER_*
|
|
* @v: event-specific value.
|
|
*
|
|
* Notify all switches in the DSA tree that this port's switch belongs to,
|
|
* including this switch itself, of an event. Allows the other switches to
|
|
* reconfigure themselves for cross-chip operations. Can also be used to
|
|
* reconfigure ports without net_devices (CPU ports, DSA links) whenever
|
|
* a user port's state changes.
|
|
*/
|
|
static int dsa_port_notify(const struct dsa_port *dp, unsigned long e, void *v)
|
|
{
|
|
return dsa_tree_notify(dp->ds->dst, e, v);
|
|
}
|
|
|
|
static void dsa_port_notify_bridge_fdb_flush(const struct dsa_port *dp)
|
|
{
|
|
struct net_device *brport_dev = dsa_port_to_bridge_port(dp);
|
|
struct switchdev_notifier_fdb_info info = {
|
|
/* flush all VLANs */
|
|
.vid = 0,
|
|
};
|
|
|
|
/* When the port becomes standalone it has already left the bridge.
|
|
* Don't notify the bridge in that case.
|
|
*/
|
|
if (!brport_dev)
|
|
return;
|
|
|
|
call_switchdev_notifiers(SWITCHDEV_FDB_FLUSH_TO_BRIDGE,
|
|
brport_dev, &info.info, NULL);
|
|
}
|
|
|
|
static void dsa_port_fast_age(const struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->port_fast_age)
|
|
return;
|
|
|
|
ds->ops->port_fast_age(ds, dp->index);
|
|
|
|
dsa_port_notify_bridge_fdb_flush(dp);
|
|
}
|
|
|
|
static bool dsa_port_can_configure_learning(struct dsa_port *dp)
|
|
{
|
|
struct switchdev_brport_flags flags = {
|
|
.mask = BR_LEARNING,
|
|
};
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
if (!ds->ops->port_bridge_flags || !ds->ops->port_pre_bridge_flags)
|
|
return false;
|
|
|
|
err = ds->ops->port_pre_bridge_flags(ds, dp->index, flags, NULL);
|
|
return !err;
|
|
}
|
|
|
|
int dsa_port_set_state(struct dsa_port *dp, u8 state, bool do_fast_age)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->port_stp_state_set)
|
|
return -EOPNOTSUPP;
|
|
|
|
ds->ops->port_stp_state_set(ds, port, state);
|
|
|
|
if (!dsa_port_can_configure_learning(dp) ||
|
|
(do_fast_age && dp->learning)) {
|
|
/* Fast age FDB entries or flush appropriate forwarding database
|
|
* for the given port, if we are moving it from Learning or
|
|
* Forwarding state, to Disabled or Blocking or Listening state.
|
|
* Ports that were standalone before the STP state change don't
|
|
* need to fast age the FDB, since address learning is off in
|
|
* standalone mode.
|
|
*/
|
|
|
|
if ((dp->stp_state == BR_STATE_LEARNING ||
|
|
dp->stp_state == BR_STATE_FORWARDING) &&
|
|
(state == BR_STATE_DISABLED ||
|
|
state == BR_STATE_BLOCKING ||
|
|
state == BR_STATE_LISTENING))
|
|
dsa_port_fast_age(dp);
|
|
}
|
|
|
|
dp->stp_state = state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_port_set_state_now(struct dsa_port *dp, u8 state,
|
|
bool do_fast_age)
|
|
{
|
|
int err;
|
|
|
|
err = dsa_port_set_state(dp, state, do_fast_age);
|
|
if (err)
|
|
pr_err("DSA: failed to set STP state %u (%d)\n", state, err);
|
|
}
|
|
|
|
int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
int err;
|
|
|
|
if (ds->ops->port_enable) {
|
|
err = ds->ops->port_enable(ds, port, phy);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (!dp->bridge_dev)
|
|
dsa_port_set_state_now(dp, BR_STATE_FORWARDING, false);
|
|
|
|
if (dp->pl)
|
|
phylink_start(dp->pl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = dsa_port_enable_rt(dp, phy);
|
|
rtnl_unlock();
|
|
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_disable_rt(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (dp->pl)
|
|
phylink_stop(dp->pl);
|
|
|
|
if (!dp->bridge_dev)
|
|
dsa_port_set_state_now(dp, BR_STATE_DISABLED, false);
|
|
|
|
if (ds->ops->port_disable)
|
|
ds->ops->port_disable(ds, port);
|
|
}
|
|
|
|
void dsa_port_disable(struct dsa_port *dp)
|
|
{
|
|
rtnl_lock();
|
|
dsa_port_disable_rt(dp);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static int dsa_port_inherit_brport_flags(struct dsa_port *dp,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
|
|
BR_BCAST_FLOOD;
|
|
struct net_device *brport_dev = dsa_port_to_bridge_port(dp);
|
|
int flag, err;
|
|
|
|
for_each_set_bit(flag, &mask, 32) {
|
|
struct switchdev_brport_flags flags = {0};
|
|
|
|
flags.mask = BIT(flag);
|
|
|
|
if (br_port_flag_is_set(brport_dev, BIT(flag)))
|
|
flags.val = BIT(flag);
|
|
|
|
err = dsa_port_bridge_flags(dp, flags, extack);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_port_clear_brport_flags(struct dsa_port *dp)
|
|
{
|
|
const unsigned long val = BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
|
|
const unsigned long mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
|
|
BR_BCAST_FLOOD;
|
|
int flag, err;
|
|
|
|
for_each_set_bit(flag, &mask, 32) {
|
|
struct switchdev_brport_flags flags = {0};
|
|
|
|
flags.mask = BIT(flag);
|
|
flags.val = val & BIT(flag);
|
|
|
|
err = dsa_port_bridge_flags(dp, flags, NULL);
|
|
if (err && err != -EOPNOTSUPP)
|
|
dev_err(dp->ds->dev,
|
|
"failed to clear bridge port flag %lu: %pe\n",
|
|
flags.val, ERR_PTR(err));
|
|
}
|
|
}
|
|
|
|
static int dsa_port_switchdev_sync_attrs(struct dsa_port *dp,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct net_device *brport_dev = dsa_port_to_bridge_port(dp);
|
|
struct net_device *br = dp->bridge_dev;
|
|
int err;
|
|
|
|
err = dsa_port_inherit_brport_flags(dp, extack);
|
|
if (err)
|
|
return err;
|
|
|
|
err = dsa_port_set_state(dp, br_port_get_stp_state(brport_dev), false);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
|
|
err = dsa_port_vlan_filtering(dp, br_vlan_enabled(br), extack);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
|
|
err = dsa_port_ageing_time(dp, br_get_ageing_time(br));
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_port_switchdev_unsync_attrs(struct dsa_port *dp)
|
|
{
|
|
/* Configure the port for standalone mode (no address learning,
|
|
* flood everything).
|
|
* The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events
|
|
* when the user requests it through netlink or sysfs, but not
|
|
* automatically at port join or leave, so we need to handle resetting
|
|
* the brport flags ourselves. But we even prefer it that way, because
|
|
* otherwise, some setups might never get the notification they need,
|
|
* for example, when a port leaves a LAG that offloads the bridge,
|
|
* it becomes standalone, but as far as the bridge is concerned, no
|
|
* port ever left.
|
|
*/
|
|
dsa_port_clear_brport_flags(dp);
|
|
|
|
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
|
|
* so allow it to be in BR_STATE_FORWARDING to be kept functional
|
|
*/
|
|
dsa_port_set_state_now(dp, BR_STATE_FORWARDING, true);
|
|
|
|
/* VLAN filtering is handled by dsa_switch_bridge_leave */
|
|
|
|
/* Ageing time may be global to the switch chip, so don't change it
|
|
* here because we have no good reason (or value) to change it to.
|
|
*/
|
|
}
|
|
|
|
static void dsa_port_bridge_tx_fwd_unoffload(struct dsa_port *dp,
|
|
struct net_device *bridge_dev)
|
|
{
|
|
int bridge_num = dp->bridge_num;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
/* No bridge TX forwarding offload => do nothing */
|
|
if (!ds->ops->port_bridge_tx_fwd_unoffload || dp->bridge_num == -1)
|
|
return;
|
|
|
|
dp->bridge_num = -1;
|
|
|
|
dsa_bridge_num_put(bridge_dev, bridge_num);
|
|
|
|
/* Notify the chips only once the offload has been deactivated, so
|
|
* that they can update their configuration accordingly.
|
|
*/
|
|
ds->ops->port_bridge_tx_fwd_unoffload(ds, dp->index, bridge_dev,
|
|
bridge_num);
|
|
}
|
|
|
|
static bool dsa_port_bridge_tx_fwd_offload(struct dsa_port *dp,
|
|
struct net_device *bridge_dev)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int bridge_num, err;
|
|
|
|
if (!ds->ops->port_bridge_tx_fwd_offload)
|
|
return false;
|
|
|
|
bridge_num = dsa_bridge_num_get(bridge_dev,
|
|
ds->num_fwd_offloading_bridges);
|
|
if (bridge_num < 0)
|
|
return false;
|
|
|
|
dp->bridge_num = bridge_num;
|
|
|
|
/* Notify the driver */
|
|
err = ds->ops->port_bridge_tx_fwd_offload(ds, dp->index, bridge_dev,
|
|
bridge_num);
|
|
if (err) {
|
|
dsa_port_bridge_tx_fwd_unoffload(dp, bridge_dev);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_notifier_bridge_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.br = br,
|
|
};
|
|
struct net_device *dev = dp->slave;
|
|
struct net_device *brport_dev;
|
|
bool tx_fwd_offload;
|
|
int err;
|
|
|
|
/* Here the interface is already bridged. Reflect the current
|
|
* configuration so that drivers can program their chips accordingly.
|
|
*/
|
|
dp->bridge_dev = br;
|
|
|
|
brport_dev = dsa_port_to_bridge_port(dp);
|
|
|
|
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info);
|
|
if (err)
|
|
goto out_rollback;
|
|
|
|
tx_fwd_offload = dsa_port_bridge_tx_fwd_offload(dp, br);
|
|
|
|
err = switchdev_bridge_port_offload(brport_dev, dev, dp,
|
|
&dsa_slave_switchdev_notifier,
|
|
&dsa_slave_switchdev_blocking_notifier,
|
|
tx_fwd_offload, extack);
|
|
if (err)
|
|
goto out_rollback_unbridge;
|
|
|
|
err = dsa_port_switchdev_sync_attrs(dp, extack);
|
|
if (err)
|
|
goto out_rollback_unoffload;
|
|
|
|
return 0;
|
|
|
|
out_rollback_unoffload:
|
|
switchdev_bridge_port_unoffload(brport_dev, dp,
|
|
&dsa_slave_switchdev_notifier,
|
|
&dsa_slave_switchdev_blocking_notifier);
|
|
out_rollback_unbridge:
|
|
dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info);
|
|
out_rollback:
|
|
dp->bridge_dev = NULL;
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_pre_bridge_leave(struct dsa_port *dp, struct net_device *br)
|
|
{
|
|
struct net_device *brport_dev = dsa_port_to_bridge_port(dp);
|
|
|
|
/* Don't try to unoffload something that is not offloaded */
|
|
if (!brport_dev)
|
|
return;
|
|
|
|
switchdev_bridge_port_unoffload(brport_dev, dp,
|
|
&dsa_slave_switchdev_notifier,
|
|
&dsa_slave_switchdev_blocking_notifier);
|
|
}
|
|
|
|
void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br)
|
|
{
|
|
struct dsa_notifier_bridge_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.br = br,
|
|
};
|
|
int err;
|
|
|
|
/* Here the port is already unbridged. Reflect the current configuration
|
|
* so that drivers can program their chips accordingly.
|
|
*/
|
|
dp->bridge_dev = NULL;
|
|
|
|
dsa_port_bridge_tx_fwd_unoffload(dp, br);
|
|
|
|
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info);
|
|
if (err)
|
|
dev_err(dp->ds->dev,
|
|
"port %d failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: %pe\n",
|
|
dp->index, ERR_PTR(err));
|
|
|
|
dsa_port_switchdev_unsync_attrs(dp);
|
|
}
|
|
|
|
int dsa_port_lag_change(struct dsa_port *dp,
|
|
struct netdev_lag_lower_state_info *linfo)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
};
|
|
bool tx_enabled;
|
|
|
|
if (!dp->lag_dev)
|
|
return 0;
|
|
|
|
/* On statically configured aggregates (e.g. loadbalance
|
|
* without LACP) ports will always be tx_enabled, even if the
|
|
* link is down. Thus we require both link_up and tx_enabled
|
|
* in order to include it in the tx set.
|
|
*/
|
|
tx_enabled = linfo->link_up && linfo->tx_enabled;
|
|
|
|
if (tx_enabled == dp->lag_tx_enabled)
|
|
return 0;
|
|
|
|
dp->lag_tx_enabled = tx_enabled;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_LAG_CHANGE, &info);
|
|
}
|
|
|
|
int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag,
|
|
struct netdev_lag_upper_info *uinfo,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.lag = lag,
|
|
.info = uinfo,
|
|
};
|
|
struct net_device *bridge_dev;
|
|
int err;
|
|
|
|
dsa_lag_map(dp->ds->dst, lag);
|
|
dp->lag_dev = lag;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_JOIN, &info);
|
|
if (err)
|
|
goto err_lag_join;
|
|
|
|
bridge_dev = netdev_master_upper_dev_get(lag);
|
|
if (!bridge_dev || !netif_is_bridge_master(bridge_dev))
|
|
return 0;
|
|
|
|
err = dsa_port_bridge_join(dp, bridge_dev, extack);
|
|
if (err)
|
|
goto err_bridge_join;
|
|
|
|
return 0;
|
|
|
|
err_bridge_join:
|
|
dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
|
|
err_lag_join:
|
|
dp->lag_dev = NULL;
|
|
dsa_lag_unmap(dp->ds->dst, lag);
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_pre_lag_leave(struct dsa_port *dp, struct net_device *lag)
|
|
{
|
|
if (dp->bridge_dev)
|
|
dsa_port_pre_bridge_leave(dp, dp->bridge_dev);
|
|
}
|
|
|
|
void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag)
|
|
{
|
|
struct dsa_notifier_lag_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.lag = lag,
|
|
};
|
|
int err;
|
|
|
|
if (!dp->lag_dev)
|
|
return;
|
|
|
|
/* Port might have been part of a LAG that in turn was
|
|
* attached to a bridge.
|
|
*/
|
|
if (dp->bridge_dev)
|
|
dsa_port_bridge_leave(dp, dp->bridge_dev);
|
|
|
|
dp->lag_tx_enabled = false;
|
|
dp->lag_dev = NULL;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
|
|
if (err)
|
|
dev_err(dp->ds->dev,
|
|
"port %d failed to notify DSA_NOTIFIER_LAG_LEAVE: %pe\n",
|
|
dp->index, ERR_PTR(err));
|
|
|
|
dsa_lag_unmap(dp->ds->dst, lag);
|
|
}
|
|
|
|
/* Must be called under rcu_read_lock() */
|
|
static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp,
|
|
bool vlan_filtering,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err, i;
|
|
|
|
/* VLAN awareness was off, so the question is "can we turn it on".
|
|
* We may have had 8021q uppers, those need to go. Make sure we don't
|
|
* enter an inconsistent state: deny changing the VLAN awareness state
|
|
* as long as we have 8021q uppers.
|
|
*/
|
|
if (vlan_filtering && dsa_is_user_port(ds, dp->index)) {
|
|
struct net_device *upper_dev, *slave = dp->slave;
|
|
struct net_device *br = dp->bridge_dev;
|
|
struct list_head *iter;
|
|
|
|
netdev_for_each_upper_dev_rcu(slave, upper_dev, iter) {
|
|
struct bridge_vlan_info br_info;
|
|
u16 vid;
|
|
|
|
if (!is_vlan_dev(upper_dev))
|
|
continue;
|
|
|
|
vid = vlan_dev_vlan_id(upper_dev);
|
|
|
|
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
|
|
* device, respectively the VID is not found, returning
|
|
* 0 means success, which is a failure for us here.
|
|
*/
|
|
err = br_vlan_get_info(br, vid, &br_info);
|
|
if (err == 0) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"Must first remove VLAN uppers having VIDs also present in bridge");
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!ds->vlan_filtering_is_global)
|
|
return true;
|
|
|
|
/* For cases where enabling/disabling VLAN awareness is global to the
|
|
* switch, we need to handle the case where multiple bridges span
|
|
* different ports of the same switch device and one of them has a
|
|
* different setting than what is being requested.
|
|
*/
|
|
for (i = 0; i < ds->num_ports; i++) {
|
|
struct net_device *other_bridge;
|
|
|
|
other_bridge = dsa_to_port(ds, i)->bridge_dev;
|
|
if (!other_bridge)
|
|
continue;
|
|
/* If it's the same bridge, it also has same
|
|
* vlan_filtering setting => no need to check
|
|
*/
|
|
if (other_bridge == dp->bridge_dev)
|
|
continue;
|
|
if (br_vlan_enabled(other_bridge) != vlan_filtering) {
|
|
NL_SET_ERR_MSG_MOD(extack,
|
|
"VLAN filtering is a global setting");
|
|
return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
bool old_vlan_filtering = dsa_port_is_vlan_filtering(dp);
|
|
struct dsa_switch *ds = dp->ds;
|
|
bool apply;
|
|
int err;
|
|
|
|
if (!ds->ops->port_vlan_filtering)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* We are called from dsa_slave_switchdev_blocking_event(),
|
|
* which is not under rcu_read_lock(), unlike
|
|
* dsa_slave_switchdev_event().
|
|
*/
|
|
rcu_read_lock();
|
|
apply = dsa_port_can_apply_vlan_filtering(dp, vlan_filtering, extack);
|
|
rcu_read_unlock();
|
|
if (!apply)
|
|
return -EINVAL;
|
|
|
|
if (dsa_port_is_vlan_filtering(dp) == vlan_filtering)
|
|
return 0;
|
|
|
|
err = ds->ops->port_vlan_filtering(ds, dp->index, vlan_filtering,
|
|
extack);
|
|
if (err)
|
|
return err;
|
|
|
|
if (ds->vlan_filtering_is_global) {
|
|
int port;
|
|
|
|
ds->vlan_filtering = vlan_filtering;
|
|
|
|
for (port = 0; port < ds->num_ports; port++) {
|
|
struct net_device *slave;
|
|
|
|
if (!dsa_is_user_port(ds, port))
|
|
continue;
|
|
|
|
/* We might be called in the unbind path, so not
|
|
* all slave devices might still be registered.
|
|
*/
|
|
slave = dsa_to_port(ds, port)->slave;
|
|
if (!slave)
|
|
continue;
|
|
|
|
err = dsa_slave_manage_vlan_filtering(slave,
|
|
vlan_filtering);
|
|
if (err)
|
|
goto restore;
|
|
}
|
|
} else {
|
|
dp->vlan_filtering = vlan_filtering;
|
|
|
|
err = dsa_slave_manage_vlan_filtering(dp->slave,
|
|
vlan_filtering);
|
|
if (err)
|
|
goto restore;
|
|
}
|
|
|
|
return 0;
|
|
|
|
restore:
|
|
ds->ops->port_vlan_filtering(ds, dp->index, old_vlan_filtering, NULL);
|
|
|
|
if (ds->vlan_filtering_is_global)
|
|
ds->vlan_filtering = old_vlan_filtering;
|
|
else
|
|
dp->vlan_filtering = old_vlan_filtering;
|
|
|
|
return err;
|
|
}
|
|
|
|
/* This enforces legacy behavior for switch drivers which assume they can't
|
|
* receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
|
|
*/
|
|
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!dp->bridge_dev)
|
|
return false;
|
|
|
|
return (!ds->configure_vlan_while_not_filtering &&
|
|
!br_vlan_enabled(dp->bridge_dev));
|
|
}
|
|
|
|
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock)
|
|
{
|
|
unsigned long ageing_jiffies = clock_t_to_jiffies(ageing_clock);
|
|
unsigned int ageing_time = jiffies_to_msecs(ageing_jiffies);
|
|
struct dsa_notifier_ageing_time_info info;
|
|
int err;
|
|
|
|
info.ageing_time = ageing_time;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_AGEING_TIME, &info);
|
|
if (err)
|
|
return err;
|
|
|
|
dp->ageing_time = ageing_time;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_pre_bridge_flags(const struct dsa_port *dp,
|
|
struct switchdev_brport_flags flags,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->port_pre_bridge_flags)
|
|
return -EINVAL;
|
|
|
|
return ds->ops->port_pre_bridge_flags(ds, dp->index, flags, extack);
|
|
}
|
|
|
|
int dsa_port_bridge_flags(struct dsa_port *dp,
|
|
struct switchdev_brport_flags flags,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
if (!ds->ops->port_bridge_flags)
|
|
return -EOPNOTSUPP;
|
|
|
|
err = ds->ops->port_bridge_flags(ds, dp->index, flags, extack);
|
|
if (err)
|
|
return err;
|
|
|
|
if (flags.mask & BR_LEARNING) {
|
|
bool learning = flags.val & BR_LEARNING;
|
|
|
|
if (learning == dp->learning)
|
|
return 0;
|
|
|
|
if ((dp->learning && !learning) &&
|
|
(dp->stp_state == BR_STATE_LEARNING ||
|
|
dp->stp_state == BR_STATE_FORWARDING))
|
|
dsa_port_fast_age(dp);
|
|
|
|
dp->learning = learning;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
|
|
bool targeted_match)
|
|
{
|
|
struct dsa_notifier_mtu_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.targeted_match = targeted_match,
|
|
.port = dp->index,
|
|
.mtu = new_mtu,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MTU, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_host_fdb_add(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
};
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
int err;
|
|
|
|
err = dev_uc_add(cpu_dp->master, addr);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_host_fdb_del(struct dsa_port *dp, const unsigned char *addr,
|
|
u16 vid)
|
|
{
|
|
struct dsa_notifier_fdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.addr = addr,
|
|
.vid = vid,
|
|
};
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
int err;
|
|
|
|
err = dev_uc_del(cpu_dp->master, addr);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_HOST_FDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_fdb_dump(struct dsa_port *dp, dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->port_fdb_dump)
|
|
return -EOPNOTSUPP;
|
|
|
|
return ds->ops->port_fdb_dump(ds, port, cb, data);
|
|
}
|
|
|
|
int dsa_port_mdb_add(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_mdb_del(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_host_mdb_add(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
int err;
|
|
|
|
err = dev_mc_add(cpu_dp->master, mdb->addr);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_HOST_MDB_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_host_mdb_del(const struct dsa_port *dp,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct dsa_notifier_mdb_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mdb = mdb,
|
|
};
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
int err;
|
|
|
|
err = dev_mc_del(cpu_dp->master, mdb->addr);
|
|
if (err)
|
|
return err;
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_HOST_MDB_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_vlan_add(struct dsa_port *dp,
|
|
const struct switchdev_obj_port_vlan *vlan,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct dsa_notifier_vlan_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vlan = vlan,
|
|
.extack = extack,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_vlan_del(struct dsa_port *dp,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct dsa_notifier_vlan_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vlan = vlan,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_mrp_add(const struct dsa_port *dp,
|
|
const struct switchdev_obj_mrp *mrp)
|
|
{
|
|
struct dsa_notifier_mrp_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mrp = mrp,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MRP_ADD, &info);
|
|
}
|
|
|
|
int dsa_port_mrp_del(const struct dsa_port *dp,
|
|
const struct switchdev_obj_mrp *mrp)
|
|
{
|
|
struct dsa_notifier_mrp_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mrp = mrp,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MRP_DEL, &info);
|
|
}
|
|
|
|
int dsa_port_mrp_add_ring_role(const struct dsa_port *dp,
|
|
const struct switchdev_obj_ring_role_mrp *mrp)
|
|
{
|
|
struct dsa_notifier_mrp_ring_role_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mrp = mrp,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MRP_ADD_RING_ROLE, &info);
|
|
}
|
|
|
|
int dsa_port_mrp_del_ring_role(const struct dsa_port *dp,
|
|
const struct switchdev_obj_ring_role_mrp *mrp)
|
|
{
|
|
struct dsa_notifier_mrp_ring_role_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.mrp = mrp,
|
|
};
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_MRP_DEL_RING_ROLE, &info);
|
|
}
|
|
|
|
void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
|
|
const struct dsa_device_ops *tag_ops)
|
|
{
|
|
cpu_dp->rcv = tag_ops->rcv;
|
|
cpu_dp->tag_ops = tag_ops;
|
|
}
|
|
|
|
static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp)
|
|
{
|
|
struct device_node *phy_dn;
|
|
struct phy_device *phydev;
|
|
|
|
phy_dn = of_parse_phandle(dp->dn, "phy-handle", 0);
|
|
if (!phy_dn)
|
|
return NULL;
|
|
|
|
phydev = of_phy_find_device(phy_dn);
|
|
if (!phydev) {
|
|
of_node_put(phy_dn);
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
of_node_put(phy_dn);
|
|
return phydev;
|
|
}
|
|
|
|
static void dsa_port_phylink_validate(struct phylink_config *config,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_validate)
|
|
return;
|
|
|
|
ds->ops->phylink_validate(ds, dp->index, supported, state);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_pcs_get_state(struct phylink_config *config,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
int err;
|
|
|
|
/* Only called for inband modes */
|
|
if (!ds->ops->phylink_mac_link_state) {
|
|
state->link = 0;
|
|
return;
|
|
}
|
|
|
|
err = ds->ops->phylink_mac_link_state(ds, dp->index, state);
|
|
if (err < 0) {
|
|
dev_err(ds->dev, "p%d: phylink_mac_link_state() failed: %d\n",
|
|
dp->index, err);
|
|
state->link = 0;
|
|
}
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_config(struct phylink_config *config,
|
|
unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_config)
|
|
return;
|
|
|
|
ds->ops->phylink_mac_config(ds, dp->index, mode, state);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_an_restart)
|
|
return;
|
|
|
|
ds->ops->phylink_mac_an_restart(ds, dp->index);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
|
|
unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct phy_device *phydev = NULL;
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (dsa_is_user_port(ds, dp->index))
|
|
phydev = dp->slave->phydev;
|
|
|
|
if (!ds->ops->phylink_mac_link_down) {
|
|
if (ds->ops->adjust_link && phydev)
|
|
ds->ops->adjust_link(ds, dp->index, phydev);
|
|
return;
|
|
}
|
|
|
|
ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
|
|
}
|
|
|
|
static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
|
|
struct phy_device *phydev,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
int speed, int duplex,
|
|
bool tx_pause, bool rx_pause)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->phylink_mac_link_up) {
|
|
if (ds->ops->adjust_link && phydev)
|
|
ds->ops->adjust_link(ds, dp->index, phydev);
|
|
return;
|
|
}
|
|
|
|
ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev,
|
|
speed, duplex, tx_pause, rx_pause);
|
|
}
|
|
|
|
const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
|
|
.validate = dsa_port_phylink_validate,
|
|
.mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state,
|
|
.mac_config = dsa_port_phylink_mac_config,
|
|
.mac_an_restart = dsa_port_phylink_mac_an_restart,
|
|
.mac_link_down = dsa_port_phylink_mac_link_down,
|
|
.mac_link_up = dsa_port_phylink_mac_link_up,
|
|
};
|
|
|
|
static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct phy_device *phydev;
|
|
int port = dp->index;
|
|
int err = 0;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (!phydev)
|
|
return 0;
|
|
|
|
if (IS_ERR(phydev))
|
|
return PTR_ERR(phydev);
|
|
|
|
if (enable) {
|
|
err = genphy_resume(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
|
|
err = genphy_read_status(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
} else {
|
|
err = genphy_suspend(phydev);
|
|
if (err < 0)
|
|
goto err_put_dev;
|
|
}
|
|
|
|
if (ds->ops->adjust_link)
|
|
ds->ops->adjust_link(ds, port, phydev);
|
|
|
|
dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev));
|
|
|
|
err_put_dev:
|
|
put_device(&phydev->mdio.dev);
|
|
return err;
|
|
}
|
|
|
|
static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
|
|
{
|
|
struct device_node *dn = dp->dn;
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct phy_device *phydev;
|
|
int port = dp->index;
|
|
phy_interface_t mode;
|
|
int err;
|
|
|
|
err = of_phy_register_fixed_link(dn);
|
|
if (err) {
|
|
dev_err(ds->dev,
|
|
"failed to register the fixed PHY of port %d\n",
|
|
port);
|
|
return err;
|
|
}
|
|
|
|
phydev = of_phy_find_device(dn);
|
|
|
|
err = of_get_phy_mode(dn, &mode);
|
|
if (err)
|
|
mode = PHY_INTERFACE_MODE_NA;
|
|
phydev->interface = mode;
|
|
|
|
genphy_read_status(phydev);
|
|
|
|
if (ds->ops->adjust_link)
|
|
ds->ops->adjust_link(ds, port, phydev);
|
|
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsa_port_phylink_register(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct device_node *port_dn = dp->dn;
|
|
phy_interface_t mode;
|
|
int err;
|
|
|
|
err = of_get_phy_mode(port_dn, &mode);
|
|
if (err)
|
|
mode = PHY_INTERFACE_MODE_NA;
|
|
|
|
dp->pl_config.dev = ds->dev;
|
|
dp->pl_config.type = PHYLINK_DEV;
|
|
dp->pl_config.pcs_poll = ds->pcs_poll;
|
|
|
|
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
|
|
mode, &dsa_port_phylink_mac_ops);
|
|
if (IS_ERR(dp->pl)) {
|
|
pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
|
|
return PTR_ERR(dp->pl);
|
|
}
|
|
|
|
err = phylink_of_phy_connect(dp->pl, port_dn, 0);
|
|
if (err && err != -ENODEV) {
|
|
pr_err("could not attach to PHY: %d\n", err);
|
|
goto err_phy_connect;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_phy_connect:
|
|
phylink_destroy(dp->pl);
|
|
return err;
|
|
}
|
|
|
|
int dsa_port_link_register_of(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
struct device_node *phy_np;
|
|
int port = dp->index;
|
|
|
|
if (!ds->ops->adjust_link) {
|
|
phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
|
|
if (of_phy_is_fixed_link(dp->dn) || phy_np) {
|
|
if (ds->ops->phylink_mac_link_down)
|
|
ds->ops->phylink_mac_link_down(ds, port,
|
|
MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
|
|
return dsa_port_phylink_register(dp);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
dev_warn(ds->dev,
|
|
"Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return dsa_port_fixed_link_register_of(dp);
|
|
else
|
|
return dsa_port_setup_phy_of(dp, true);
|
|
}
|
|
|
|
void dsa_port_link_unregister_of(struct dsa_port *dp)
|
|
{
|
|
struct dsa_switch *ds = dp->ds;
|
|
|
|
if (!ds->ops->adjust_link && dp->pl) {
|
|
rtnl_lock();
|
|
phylink_disconnect_phy(dp->pl);
|
|
rtnl_unlock();
|
|
phylink_destroy(dp->pl);
|
|
dp->pl = NULL;
|
|
return;
|
|
}
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
of_phy_deregister_fixed_link(dp->dn);
|
|
else
|
|
dsa_port_setup_phy_of(dp, false);
|
|
}
|
|
|
|
int dsa_port_get_phy_strings(struct dsa_port *dp, uint8_t *data)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_strings(phydev, data);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_phy_strings);
|
|
|
|
int dsa_port_get_ethtool_phy_stats(struct dsa_port *dp, uint64_t *data)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_stats(phydev, NULL, data);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_ethtool_phy_stats);
|
|
|
|
int dsa_port_get_phy_sset_count(struct dsa_port *dp)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
if (of_phy_is_fixed_link(dp->dn))
|
|
return ret;
|
|
|
|
phydev = dsa_port_get_phy_device(dp);
|
|
if (IS_ERR_OR_NULL(phydev))
|
|
return ret;
|
|
|
|
ret = phy_ethtool_get_sset_count(phydev);
|
|
put_device(&phydev->mdio.dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dsa_port_get_phy_sset_count);
|
|
|
|
int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr)
|
|
{
|
|
struct dsa_notifier_hsr_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.hsr = hsr,
|
|
};
|
|
int err;
|
|
|
|
dp->hsr_dev = hsr;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_HSR_JOIN, &info);
|
|
if (err)
|
|
dp->hsr_dev = NULL;
|
|
|
|
return err;
|
|
}
|
|
|
|
void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr)
|
|
{
|
|
struct dsa_notifier_hsr_info info = {
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.hsr = hsr,
|
|
};
|
|
int err;
|
|
|
|
dp->hsr_dev = NULL;
|
|
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_HSR_LEAVE, &info);
|
|
if (err)
|
|
dev_err(dp->ds->dev,
|
|
"port %d failed to notify DSA_NOTIFIER_HSR_LEAVE: %pe\n",
|
|
dp->index, ERR_PTR(err));
|
|
}
|
|
|
|
int dsa_port_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, bool broadcast)
|
|
{
|
|
struct dsa_notifier_tag_8021q_vlan_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vid = vid,
|
|
};
|
|
|
|
if (broadcast)
|
|
return dsa_broadcast(DSA_NOTIFIER_TAG_8021Q_VLAN_ADD, &info);
|
|
|
|
return dsa_port_notify(dp, DSA_NOTIFIER_TAG_8021Q_VLAN_ADD, &info);
|
|
}
|
|
|
|
void dsa_port_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid, bool broadcast)
|
|
{
|
|
struct dsa_notifier_tag_8021q_vlan_info info = {
|
|
.tree_index = dp->ds->dst->index,
|
|
.sw_index = dp->ds->index,
|
|
.port = dp->index,
|
|
.vid = vid,
|
|
};
|
|
int err;
|
|
|
|
if (broadcast)
|
|
err = dsa_broadcast(DSA_NOTIFIER_TAG_8021Q_VLAN_DEL, &info);
|
|
else
|
|
err = dsa_port_notify(dp, DSA_NOTIFIER_TAG_8021Q_VLAN_DEL, &info);
|
|
if (err)
|
|
dev_err(dp->ds->dev,
|
|
"port %d failed to notify tag_8021q VLAN %d deletion: %pe\n",
|
|
dp->index, vid, ERR_PTR(err));
|
|
}
|