linux/drivers/net/wireless/rtlwifi/debug.h
Larry Finger 21e4b0726d rtlwifi: rtl8821ae: Move driver from staging to regular tree
This driver was entered into staging a few cycles ago because there was
not time to integrate the Realtek version into the support routines in
the kernel. Now that there is an effort to converg the code base from Linux
and the Realtek repo, it is time to move this driver. In addition, all the
updates included in the 06/28/2014 version of the Realtek drivers are
included here.

With this change, it will be necessary to delete the staging driver. That
will be handled in a separate patch. As it impacts the staging tree, such a
patch is sent to a different destination.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26 17:22:28 -04:00

242 lines
6.5 KiB
C

/******************************************************************************
*
* Copyright(c) 2009-2012 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*****************************************************************************/
#ifndef __RTL_DEBUG_H__
#define __RTL_DEBUG_H__
/*--------------------------------------------------------------
Debug level
--------------------------------------------------------------*/
/*
*Fatal bug.
*For example, Tx/Rx/IO locked up,
*memory access violation,
*resource allocation failed,
*unexpected HW behavior, HW BUG
*and so on.
*/
#define DBG_EMERG 0
/*
*Abnormal, rare, or unexpeted cases.
*For example, Packet/IO Ctl canceled,
*device suprisely unremoved and so on.
*/
#define DBG_WARNING 2
/*
*Normal case driver developer should
*open, we can see link status like
*assoc/AddBA/DHCP/adapter start and
*so on basic and useful infromations.
*/
#define DBG_DMESG 3
/*
*Normal case with useful information
*about current SW or HW state.
*For example, Tx/Rx descriptor to fill,
*Tx/Rx descriptor completed status,
*SW protocol state change, dynamic
*mechanism state change and so on.
*/
#define DBG_LOUD 4
/*
*Normal case with detail execution
*flow or information.
*/
#define DBG_TRACE 5
/*--------------------------------------------------------------
Define the rt_trace components
--------------------------------------------------------------*/
#define COMP_ERR BIT(0)
#define COMP_FW BIT(1)
#define COMP_INIT BIT(2) /*For init/deinit */
#define COMP_RECV BIT(3) /*For Rx. */
#define COMP_SEND BIT(4) /*For Tx. */
#define COMP_MLME BIT(5) /*For MLME. */
#define COMP_SCAN BIT(6) /*For Scan. */
#define COMP_INTR BIT(7) /*For interrupt Related. */
#define COMP_LED BIT(8) /*For LED. */
#define COMP_SEC BIT(9) /*For sec. */
#define COMP_BEACON BIT(10) /*For beacon. */
#define COMP_RATE BIT(11) /*For rate. */
#define COMP_RXDESC BIT(12) /*For rx desc. */
#define COMP_DIG BIT(13) /*For DIG */
#define COMP_TXAGC BIT(14) /*For Tx power */
#define COMP_HIPWR BIT(15) /*For High Power Mechanism */
#define COMP_POWER BIT(16) /*For lps/ips/aspm. */
#define COMP_POWER_TRACKING BIT(17) /*For TX POWER TRACKING */
#define COMP_BB_POWERSAVING BIT(18)
#define COMP_SWAS BIT(19) /*For SW Antenna Switch */
#define COMP_RF BIT(20) /*For RF. */
#define COMP_TURBO BIT(21) /*For EDCA TURBO. */
#define COMP_RATR BIT(22)
#define COMP_CMD BIT(23)
#define COMP_EFUSE BIT(24)
#define COMP_QOS BIT(25)
#define COMP_MAC80211 BIT(26)
#define COMP_REGD BIT(27)
#define COMP_CHAN BIT(28)
#define COMP_USB BIT(29)
#define COMP_EASY_CONCURRENT COMP_USB /* reuse of this bit is OK */
#define COMP_BT_COEXIST BIT(30)
#define COMP_IQK BIT(31)
/*--------------------------------------------------------------
Define the rt_print components
--------------------------------------------------------------*/
/* Define EEPROM and EFUSE check module bit*/
#define EEPROM_W BIT(0)
#define EFUSE_PG BIT(1)
#define EFUSE_READ_ALL BIT(2)
/* Define init check for module bit*/
#define INIT_EEPROM BIT(0)
#define INIT_TXPOWER BIT(1)
#define INIT_IQK BIT(2)
#define INIT_RF BIT(3)
/* Define PHY-BB/RF/MAC check module bit */
#define PHY_BBR BIT(0)
#define PHY_BBW BIT(1)
#define PHY_RFR BIT(2)
#define PHY_RFW BIT(3)
#define PHY_MACR BIT(4)
#define PHY_MACW BIT(5)
#define PHY_ALLR BIT(6)
#define PHY_ALLW BIT(7)
#define PHY_TXPWR BIT(8)
#define PHY_PWRDIFF BIT(9)
/* Define Dynamic Mechanism check module bit --> FDM */
#define WA_IOT BIT(0)
#define DM_PWDB BIT(1)
#define DM_MONITOR BIT(2)
#define DM_DIG BIT(3)
#define DM_EDCA_TURBO BIT(4)
#define DM_PWDB BIT(1)
enum dbgp_flag_e {
FQOS = 0,
FTX = 1,
FRX = 2,
FSEC = 3,
FMGNT = 4,
FMLME = 5,
FRESOURCE = 6,
FBEACON = 7,
FISR = 8,
FPHY = 9,
FMP = 10,
FEEPROM = 11,
FPWR = 12,
FDM = 13,
FDBGCtrl = 14,
FC2H = 15,
FBT = 16,
FINIT = 17,
FIOCTL = 18,
DBGP_TYPE_MAX
};
#ifdef CONFIG_RTLWIFI_DEBUG
#define RT_ASSERT(_exp, fmt, ...) \
do { \
if (!(_exp)) { \
printk(KERN_DEBUG KBUILD_MODNAME ":%s(): " fmt, \
__func__, ##__VA_ARGS__); \
} \
} while (0)
#define RT_TRACE(rtlpriv, comp, level, fmt, ...) \
do { \
if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
((level) <= rtlpriv->dbg.global_debuglevel))) { \
printk(KERN_DEBUG KBUILD_MODNAME ":%s():<%lx-%x> " fmt, \
__func__, in_interrupt(), in_atomic(), \
##__VA_ARGS__); \
} \
} while (0)
#define RTPRINT(rtlpriv, dbgtype, dbgflag, fmt, ...) \
do { \
if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \
##__VA_ARGS__); \
} \
} while (0)
#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
_hexdatalen) \
do { \
if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) && \
(_level <= rtlpriv->dbg.global_debuglevel))) { \
printk(KERN_DEBUG "%s: In process \"%s\" (pid %i): %s\n", \
KBUILD_MODNAME, current->comm, current->pid, \
_titlestring); \
print_hex_dump_bytes("", DUMP_PREFIX_NONE, \
_hexdata, _hexdatalen); \
} \
} while (0)
#else
struct rtl_priv;
__printf(2, 3)
static inline void RT_ASSERT(int exp, const char *fmt, ...)
{
}
__printf(4, 5)
static inline void RT_TRACE(struct rtl_priv *rtlpriv,
int comp, int level,
const char *fmt, ...)
{
}
__printf(4, 5)
static inline void RTPRINT(struct rtl_priv *rtlpriv,
int dbgtype, int dbgflag,
const char *fmt, ...)
{
}
static inline void RT_PRINT_DATA(struct rtl_priv *rtlpriv,
int comp, int level,
const char *titlestring,
const void *hexdata, size_t hexdatalen)
{
}
#endif
void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
#endif