linux/drivers/thunderbolt/usb4_port.c
Rajmohan Mani 3fb10ea4ce thunderbolt: Add support for retimer NVM upgrade when there is no link
With help from platform firmware (ACPI) it is possible to power on
retimers even when there is no USB4 link (e.g nothing is connected to
the USB4 ports). This allows us to bring the USB4 sideband up so that we
can access retimers and upgrade their NVM firmware.

If the platform has support for this, we expose two additional
attributes under USB4 ports: offline and rescan. These can be used to
bring the port offline, rescan for the retimers and put the port online
again. The retimer NVM upgrade itself works the same way than with cable
connected.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-01 10:53:31 +03:00

282 lines
6.0 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* USB4 port device
*
* Copyright (C) 2021, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/acpi.h>
#include <linux/pm_runtime.h>
#include "tb.h"
static ssize_t link_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
struct tb_port *port = usb4->port;
struct tb *tb = port->sw->tb;
const char *link;
if (mutex_lock_interruptible(&tb->lock))
return -ERESTARTSYS;
if (tb_is_upstream_port(port))
link = port->sw->link_usb4 ? "usb4" : "tbt";
else if (tb_port_has_remote(port))
link = port->remote->sw->link_usb4 ? "usb4" : "tbt";
else
link = "none";
mutex_unlock(&tb->lock);
return sysfs_emit(buf, "%s\n", link);
}
static DEVICE_ATTR_RO(link);
static struct attribute *common_attrs[] = {
&dev_attr_link.attr,
NULL
};
static const struct attribute_group common_group = {
.attrs = common_attrs,
};
static int usb4_port_offline(struct usb4_port *usb4)
{
struct tb_port *port = usb4->port;
int ret;
ret = tb_acpi_power_on_retimers(port);
if (ret)
return ret;
ret = usb4_port_router_offline(port);
if (ret) {
tb_acpi_power_off_retimers(port);
return ret;
}
ret = tb_retimer_scan(port, false);
if (ret) {
usb4_port_router_online(port);
tb_acpi_power_off_retimers(port);
}
return ret;
}
static void usb4_port_online(struct usb4_port *usb4)
{
struct tb_port *port = usb4->port;
usb4_port_router_online(port);
tb_acpi_power_off_retimers(port);
}
static ssize_t offline_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
return sysfs_emit(buf, "%d\n", usb4->offline);
}
static ssize_t offline_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
struct tb_port *port = usb4->port;
struct tb *tb = port->sw->tb;
bool val;
int ret;
ret = kstrtobool(buf, &val);
if (ret)
return ret;
pm_runtime_get_sync(&usb4->dev);
if (mutex_lock_interruptible(&tb->lock)) {
ret = -ERESTARTSYS;
goto out_rpm;
}
if (val == usb4->offline)
goto out_unlock;
/* Offline mode works only for ports that are not connected */
if (tb_port_has_remote(port)) {
ret = -EBUSY;
goto out_unlock;
}
if (val) {
ret = usb4_port_offline(usb4);
if (ret)
goto out_unlock;
} else {
usb4_port_online(usb4);
tb_retimer_remove_all(port);
}
usb4->offline = val;
tb_port_dbg(port, "%s offline mode\n", val ? "enter" : "exit");
out_unlock:
mutex_unlock(&tb->lock);
out_rpm:
pm_runtime_mark_last_busy(&usb4->dev);
pm_runtime_put_autosuspend(&usb4->dev);
return ret ? ret : count;
}
static DEVICE_ATTR_RW(offline);
static ssize_t rescan_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
struct tb_port *port = usb4->port;
struct tb *tb = port->sw->tb;
bool val;
int ret;
ret = kstrtobool(buf, &val);
if (ret)
return ret;
if (!val)
return count;
pm_runtime_get_sync(&usb4->dev);
if (mutex_lock_interruptible(&tb->lock)) {
ret = -ERESTARTSYS;
goto out_rpm;
}
/* Must be in offline mode already */
if (!usb4->offline) {
ret = -EINVAL;
goto out_unlock;
}
tb_retimer_remove_all(port);
ret = tb_retimer_scan(port, true);
out_unlock:
mutex_unlock(&tb->lock);
out_rpm:
pm_runtime_mark_last_busy(&usb4->dev);
pm_runtime_put_autosuspend(&usb4->dev);
return ret ? ret : count;
}
static DEVICE_ATTR_WO(rescan);
static struct attribute *service_attrs[] = {
&dev_attr_offline.attr,
&dev_attr_rescan.attr,
NULL
};
static umode_t service_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n)
{
struct device *dev = kobj_to_dev(kobj);
struct usb4_port *usb4 = tb_to_usb4_port_device(dev);
/*
* Always need some platform help to cycle the modes so that
* retimers can be accessed through the sideband.
*/
return usb4->can_offline ? attr->mode : 0;
}
static const struct attribute_group service_group = {
.attrs = service_attrs,
.is_visible = service_attr_is_visible,
};
static const struct attribute_group *usb4_port_device_groups[] = {
&common_group,
&service_group,
NULL
};
static void usb4_port_device_release(struct device *dev)
{
struct usb4_port *usb4 = container_of(dev, struct usb4_port, dev);
kfree(usb4);
}
struct device_type usb4_port_device_type = {
.name = "usb4_port",
.groups = usb4_port_device_groups,
.release = usb4_port_device_release,
};
/**
* usb4_port_device_add() - Add USB4 port device
* @port: Lane 0 adapter port to add the USB4 port
*
* Creates and registers a USB4 port device for @port. Returns the new
* USB4 port device pointer or ERR_PTR() in case of error.
*/
struct usb4_port *usb4_port_device_add(struct tb_port *port)
{
struct usb4_port *usb4;
int ret;
usb4 = kzalloc(sizeof(*usb4), GFP_KERNEL);
if (!usb4)
return ERR_PTR(-ENOMEM);
usb4->port = port;
usb4->dev.type = &usb4_port_device_type;
usb4->dev.parent = &port->sw->dev;
dev_set_name(&usb4->dev, "usb4_port%d", port->port);
ret = device_register(&usb4->dev);
if (ret) {
put_device(&usb4->dev);
return ERR_PTR(ret);
}
pm_runtime_no_callbacks(&usb4->dev);
pm_runtime_set_active(&usb4->dev);
pm_runtime_enable(&usb4->dev);
pm_runtime_set_autosuspend_delay(&usb4->dev, TB_AUTOSUSPEND_DELAY);
pm_runtime_mark_last_busy(&usb4->dev);
pm_runtime_use_autosuspend(&usb4->dev);
return usb4;
}
/**
* usb4_port_device_remove() - Removes USB4 port device
* @usb4: USB4 port device
*
* Unregisters the USB4 port device from the system. The device will be
* released when the last reference is dropped.
*/
void usb4_port_device_remove(struct usb4_port *usb4)
{
device_unregister(&usb4->dev);
}
/**
* usb4_port_device_resume() - Resumes USB4 port device
* @usb4: USB4 port device
*
* Used to resume USB4 port device after sleep state.
*/
int usb4_port_device_resume(struct usb4_port *usb4)
{
return usb4->offline ? usb4_port_offline(usb4) : 0;
}