mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 05:54:23 +08:00
448cf90513
GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once. For the details one may look into the of_gpio_dev_init() implementation. While at it, remove duplicate parent device assignment where it is the case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
690 lines
19 KiB
C
690 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
* Copyright (C) 2018 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* EIC registers definition */
|
|
#define SPRD_EIC_DBNC_DATA 0x0
|
|
#define SPRD_EIC_DBNC_DMSK 0x4
|
|
#define SPRD_EIC_DBNC_IEV 0x14
|
|
#define SPRD_EIC_DBNC_IE 0x18
|
|
#define SPRD_EIC_DBNC_RIS 0x1c
|
|
#define SPRD_EIC_DBNC_MIS 0x20
|
|
#define SPRD_EIC_DBNC_IC 0x24
|
|
#define SPRD_EIC_DBNC_TRIG 0x28
|
|
#define SPRD_EIC_DBNC_CTRL0 0x40
|
|
|
|
#define SPRD_EIC_LATCH_INTEN 0x0
|
|
#define SPRD_EIC_LATCH_INTRAW 0x4
|
|
#define SPRD_EIC_LATCH_INTMSK 0x8
|
|
#define SPRD_EIC_LATCH_INTCLR 0xc
|
|
#define SPRD_EIC_LATCH_INTPOL 0x10
|
|
#define SPRD_EIC_LATCH_INTMODE 0x14
|
|
|
|
#define SPRD_EIC_ASYNC_INTIE 0x0
|
|
#define SPRD_EIC_ASYNC_INTRAW 0x4
|
|
#define SPRD_EIC_ASYNC_INTMSK 0x8
|
|
#define SPRD_EIC_ASYNC_INTCLR 0xc
|
|
#define SPRD_EIC_ASYNC_INTMODE 0x10
|
|
#define SPRD_EIC_ASYNC_INTBOTH 0x14
|
|
#define SPRD_EIC_ASYNC_INTPOL 0x18
|
|
#define SPRD_EIC_ASYNC_DATA 0x1c
|
|
|
|
#define SPRD_EIC_SYNC_INTIE 0x0
|
|
#define SPRD_EIC_SYNC_INTRAW 0x4
|
|
#define SPRD_EIC_SYNC_INTMSK 0x8
|
|
#define SPRD_EIC_SYNC_INTCLR 0xc
|
|
#define SPRD_EIC_SYNC_INTMODE 0x10
|
|
#define SPRD_EIC_SYNC_INTBOTH 0x14
|
|
#define SPRD_EIC_SYNC_INTPOL 0x18
|
|
#define SPRD_EIC_SYNC_DATA 0x1c
|
|
|
|
/*
|
|
* The digital-chip EIC controller can support maximum 3 banks, and each bank
|
|
* contains 8 EICs.
|
|
*/
|
|
#define SPRD_EIC_MAX_BANK 3
|
|
#define SPRD_EIC_PER_BANK_NR 8
|
|
#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
|
|
#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
|
|
#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
|
|
|
|
/*
|
|
* The Spreadtrum EIC (external interrupt controller) can be used only in
|
|
* input mode to generate interrupts if detecting input signals.
|
|
*
|
|
* The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
|
|
* debounce EIC, latch EIC, async EIC and sync EIC,
|
|
*
|
|
* The debounce EIC is used to capture the input signals' stable status
|
|
* (millisecond resolution) and a single-trigger mechanism is introduced
|
|
* into this sub-module to enhance the input event detection reliability.
|
|
* The debounce range is from 1ms to 4s with a step size of 1ms.
|
|
*
|
|
* The latch EIC is used to latch some special power down signals and
|
|
* generate interrupts, since the latch EIC does not depend on the APB clock
|
|
* to capture signals.
|
|
*
|
|
* The async EIC uses a 32k clock to capture the short signals (microsecond
|
|
* resolution) to generate interrupts by level or edge trigger.
|
|
*
|
|
* The EIC-sync is similar with GPIO's input function, which is a synchronized
|
|
* signal input register.
|
|
*/
|
|
enum sprd_eic_type {
|
|
SPRD_EIC_DEBOUNCE,
|
|
SPRD_EIC_LATCH,
|
|
SPRD_EIC_ASYNC,
|
|
SPRD_EIC_SYNC,
|
|
SPRD_EIC_MAX,
|
|
};
|
|
|
|
struct sprd_eic {
|
|
struct gpio_chip chip;
|
|
struct irq_chip intc;
|
|
void __iomem *base[SPRD_EIC_MAX_BANK];
|
|
enum sprd_eic_type type;
|
|
spinlock_t lock;
|
|
int irq;
|
|
};
|
|
|
|
struct sprd_eic_variant_data {
|
|
enum sprd_eic_type type;
|
|
u32 num_eics;
|
|
};
|
|
|
|
static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
|
|
"eic-debounce", "eic-latch", "eic-async",
|
|
"eic-sync",
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
|
|
.type = SPRD_EIC_DEBOUNCE,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
|
|
.type = SPRD_EIC_LATCH,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_async_data = {
|
|
.type = SPRD_EIC_ASYNC,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
|
|
.type = SPRD_EIC_SYNC,
|
|
.num_eics = 8,
|
|
};
|
|
|
|
static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
|
|
unsigned int bank)
|
|
{
|
|
if (bank >= SPRD_EIC_MAX_BANK)
|
|
return NULL;
|
|
|
|
return sprd_eic->base[bank];
|
|
}
|
|
|
|
static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
|
|
u16 reg, unsigned int val)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
unsigned long flags;
|
|
u32 tmp;
|
|
|
|
spin_lock_irqsave(&sprd_eic->lock, flags);
|
|
tmp = readl_relaxed(base + reg);
|
|
|
|
if (val)
|
|
tmp |= BIT(SPRD_EIC_BIT(offset));
|
|
else
|
|
tmp &= ~BIT(SPRD_EIC_BIT(offset));
|
|
|
|
writel_relaxed(tmp, base + reg);
|
|
spin_unlock_irqrestore(&sprd_eic->lock, flags);
|
|
}
|
|
|
|
static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
|
|
return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
|
|
}
|
|
|
|
static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
|
|
}
|
|
|
|
static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
|
|
case SPRD_EIC_ASYNC:
|
|
return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
|
|
case SPRD_EIC_SYNC:
|
|
return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
}
|
|
|
|
static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned int debounce)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
void __iomem *base =
|
|
sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
|
|
u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
|
|
u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
|
|
|
|
value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
|
|
writel_relaxed(value, base + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
unsigned long param = pinconf_to_config_param(config);
|
|
u32 arg = pinconf_to_config_argument(config);
|
|
|
|
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return sprd_eic_set_debounce(chip, offset, arg);
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static void sprd_eic_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_ack(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
}
|
|
}
|
|
|
|
static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
int state;
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
state = sprd_eic_get(chip, offset);
|
|
if (state)
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_DBNC_IEV, 0);
|
|
else
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
state = sprd_eic_get(chip, offset);
|
|
if (state)
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_LATCH_INTPOL, 0);
|
|
else
|
|
sprd_eic_update(chip, offset,
|
|
SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
|
|
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
|
|
unsigned int offset)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
struct irq_data *data = irq_get_irq_data(irq);
|
|
u32 trigger = irqd_get_trigger_type(data);
|
|
int state, post_state;
|
|
|
|
/*
|
|
* The debounce EIC and latch EIC can only support level trigger, so we
|
|
* can toggle the level trigger to emulate the edge trigger.
|
|
*/
|
|
if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
|
|
sprd_eic->type != SPRD_EIC_LATCH) ||
|
|
!(trigger & IRQ_TYPE_EDGE_BOTH))
|
|
return;
|
|
|
|
sprd_eic_irq_mask(data);
|
|
state = sprd_eic_get(chip, offset);
|
|
|
|
retry:
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
if (state)
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
|
|
else
|
|
sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
if (state)
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
|
|
else
|
|
sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
|
|
break;
|
|
default:
|
|
sprd_eic_irq_unmask(data);
|
|
return;
|
|
}
|
|
|
|
post_state = sprd_eic_get(chip, offset);
|
|
if (state != post_state) {
|
|
dev_warn(chip->parent, "EIC level was changed.\n");
|
|
state = post_state;
|
|
goto retry;
|
|
}
|
|
|
|
sprd_eic_irq_unmask(data);
|
|
}
|
|
|
|
static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
|
|
{
|
|
enum sprd_eic_type type = *(enum sprd_eic_type *)data;
|
|
|
|
return !strcmp(chip->label, sprd_eic_label_name[type]);
|
|
}
|
|
|
|
static void sprd_eic_handle_one_type(struct gpio_chip *chip)
|
|
{
|
|
struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
|
|
u32 bank, n, girq;
|
|
|
|
for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
|
|
void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
|
|
unsigned long reg;
|
|
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_ASYNC:
|
|
reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
case SPRD_EIC_SYNC:
|
|
reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
|
|
SPRD_EIC_DATA_MASK;
|
|
break;
|
|
default:
|
|
dev_err(chip->parent, "Unsupported EIC type.\n");
|
|
return;
|
|
}
|
|
|
|
for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) {
|
|
u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
|
|
|
|
girq = irq_find_mapping(chip->irq.domain, offset);
|
|
|
|
generic_handle_irq(girq);
|
|
sprd_eic_toggle_trigger(chip, girq, offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void sprd_eic_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_chip *ic = irq_desc_get_chip(desc);
|
|
struct gpio_chip *chip;
|
|
enum sprd_eic_type type;
|
|
|
|
chained_irq_enter(ic, desc);
|
|
|
|
/*
|
|
* Since the digital-chip EIC 4 sub-modules (debounce, latch, async
|
|
* and sync) share one same interrupt line, we should iterate each
|
|
* EIC module to check if there are EIC interrupts were triggered.
|
|
*/
|
|
for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
|
|
chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
|
|
if (!chip)
|
|
continue;
|
|
|
|
sprd_eic_handle_one_type(chip);
|
|
}
|
|
|
|
chained_irq_exit(ic, desc);
|
|
}
|
|
|
|
static int sprd_eic_probe(struct platform_device *pdev)
|
|
{
|
|
const struct sprd_eic_variant_data *pdata;
|
|
struct gpio_irq_chip *irq;
|
|
struct sprd_eic *sprd_eic;
|
|
struct resource *res;
|
|
int ret, i;
|
|
|
|
pdata = of_device_get_match_data(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No matching driver data found.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
|
|
if (!sprd_eic)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sprd_eic->lock);
|
|
sprd_eic->type = pdata->type;
|
|
|
|
sprd_eic->irq = platform_get_irq(pdev, 0);
|
|
if (sprd_eic->irq < 0)
|
|
return sprd_eic->irq;
|
|
|
|
for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
|
|
/*
|
|
* We can have maximum 3 banks EICs, and each EIC has
|
|
* its own base address. But some platform maybe only
|
|
* have one bank EIC, thus base[1] and base[2] can be
|
|
* optional.
|
|
*/
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
if (!res)
|
|
break;
|
|
|
|
sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(sprd_eic->base[i]))
|
|
return PTR_ERR(sprd_eic->base[i]);
|
|
}
|
|
|
|
sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
|
|
sprd_eic->chip.ngpio = pdata->num_eics;
|
|
sprd_eic->chip.base = -1;
|
|
sprd_eic->chip.parent = &pdev->dev;
|
|
sprd_eic->chip.direction_input = sprd_eic_direction_input;
|
|
switch (sprd_eic->type) {
|
|
case SPRD_EIC_DEBOUNCE:
|
|
sprd_eic->chip.request = sprd_eic_request;
|
|
sprd_eic->chip.free = sprd_eic_free;
|
|
sprd_eic->chip.set_config = sprd_eic_set_config;
|
|
sprd_eic->chip.set = sprd_eic_set;
|
|
fallthrough;
|
|
case SPRD_EIC_ASYNC:
|
|
case SPRD_EIC_SYNC:
|
|
sprd_eic->chip.get = sprd_eic_get;
|
|
break;
|
|
case SPRD_EIC_LATCH:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
sprd_eic->intc.name = dev_name(&pdev->dev);
|
|
sprd_eic->intc.irq_ack = sprd_eic_irq_ack;
|
|
sprd_eic->intc.irq_mask = sprd_eic_irq_mask;
|
|
sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask;
|
|
sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type;
|
|
sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
|
|
|
|
irq = &sprd_eic->chip.irq;
|
|
irq->chip = &sprd_eic->intc;
|
|
irq->handler = handle_bad_irq;
|
|
irq->default_type = IRQ_TYPE_NONE;
|
|
irq->parent_handler = sprd_eic_irq_handler;
|
|
irq->parent_handler_data = sprd_eic;
|
|
irq->num_parents = 1;
|
|
irq->parents = &sprd_eic->irq;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, sprd_eic);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sprd_eic_of_match[] = {
|
|
{
|
|
.compatible = "sprd,sc9860-eic-debounce",
|
|
.data = &sc9860_eic_dbnc_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-latch",
|
|
.data = &sc9860_eic_latch_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-async",
|
|
.data = &sc9860_eic_async_data,
|
|
},
|
|
{
|
|
.compatible = "sprd,sc9860-eic-sync",
|
|
.data = &sc9860_eic_sync_data,
|
|
},
|
|
{
|
|
/* end of list */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
|
|
|
|
static struct platform_driver sprd_eic_driver = {
|
|
.probe = sprd_eic_probe,
|
|
.driver = {
|
|
.name = "sprd-eic",
|
|
.of_match_table = sprd_eic_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sprd_eic_driver);
|
|
|
|
MODULE_DESCRIPTION("Spreadtrum EIC driver");
|
|
MODULE_LICENSE("GPL v2");
|